Download or read book Computer aided Mechanical Design and Analysis written by V. Ramamurti and published by McGraw-Hill Companies. This book was released on 1998 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring a wide variety of the latest time-saving computer-aided methods, this practical guide covers the design and analysis of most machine elements that are statically indeterminate. Packed with scores of illustrations and examples as well as numerous case studies specific to the manufacturing industry, it provides methods that apply to such mechanical components as cranes, hydraulic presses, pressure vessels, heavy duty molding boxes, gear boxes, steam turbine rotors, boiler frames, compressor disks, gear wheels and impellers, and circuit breakers. Included is important discussion of cyclic symmetry, a subject rarely covered by books on the finite element method.

Download or read book Computer Aided Engineering Design written by Anupam Saxena and published by Springer Science & Business Media. This book was released on 2007-12-08 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new discipline is said to attain maturity when the subject matter takes the shape of a textbook. Several textbooks later, the discipline tends to acquire a firm place in the curriculum for teaching and learning. Computer Aided Engineering Design (CAED), barely three decades old, is interdisciplinary in nature whose boundaries are still expanding. However, it draws its core strength from several acknowledged and diverse areas such as computer graphics, differential geometry, Boolean algebra, computational geometry, topological spaces, numerical analysis, mechanics of solids, engineering design and a few others. CAED also needs to show its strong linkages with Computer Aided Manufacturing (CAM). As is true with any growing discipline, the literature is widespread in research journals, edited books, and conference proceedings. Various textbooks have appeared with different biases, like geometric modeling, computer graphics, and CAD/CAM over the last decade. This book goes into mathematical foundations and the core subjects of CAED without allowing itself to be overshadowed by computer graphics. It is written in a logical and thorough manner for use mainly by senior and graduate level students as well as users and developers of CAD software. The book covers (a) The fundamental concepts of geometric modeling so that a real understanding of designing synthetic surfaces and solid modeling can be achieved. (b) A wide spectrum of CAED topics such as CAD of linkages and machine elements, finite element analysis, optimization. (c) Application of these methods to real world problems.

Download or read book Machine Design with CAD and Optimization written by Sayed M. Metwalli and published by John Wiley & Sons. This book was released on 2021-04-22 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: MACHINE DESIGN WITH CAD AND OPTIMIZATION A guide to the new CAD and optimization tools and skills to generate real design synthesis of machine elements and systems Machine Design with CAD and Optimization offers the basic tools to design or synthesize machine elements and assembly of prospective elements in systems or products. It contains the necessary knowledge base, computer aided design, and optimization tools to define appropriate geometry and material selection of machine elements. A comprehensive text for each element includes: a chart, excel sheet, a MATLAB® program, or an interactive program to calculate the element geometry to guide in the selection of the appropriate material. The book contains an introduction to machine design and includes several design factors for consideration. It also offers information on the traditional rigorous design of machine elements. In addition, the author reviews the real design synthesis approach and offers material about stresses and material failure due to applied loading during intended performance. This comprehensive resource also contains an introduction to computer aided design and optimization. This important book: Provides the tools to perform a new direct design synthesis rather than design by a process of repeated analysis Contains a guide to knowledge-based design using CAD tools, software, and optimum component design for the new direct design synthesis of machine elements Allows for the initial suitable design synthesis in a very short time Delivers information on the utility of CAD and Optimization Accompanied by an online companion site including presentation files Written for students of engineering design, mechanical engineering, and automotive design. Machine Design with CAD and Optimization contains the new CAD and Optimization tools and defines the skills needed to generate real design synthesis of machine elements and systems on solid ground for better products and systems.

Download or read book Computer Aided Analysis and Design written by Srinivasa Prakash Regalla and published by I. K. International Pvt Ltd. This book was released on 2013-12-30 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has all the details required for the complete coverage of either undergraduate level or graduate level course on Computer Aided Design for mechanical engineers, design engineers and civil and architectural engineers. Emphasis has been laid on explaining the concepts and techniques more from the practical and implementation standpoint so that the reader can begin hands-on and to enable the reader to write his own programs and design CAD systems for any mechanical element. Each chapter has a large number of solved and unsolved exercise problems. The book is complemented by several open ended projects, topics as well as partial details of solution, in all the chapters. Close knitting among the geometric modeling, computer aided engineering and applications such as rapid prototyping is a special feature of this book. Spread in two parts containing 11 chapters the book broadly covers: " Background of the CAD systems. " Curve, surface and solid modeling techniques " Rapid prototyping technology. " Fundamental techniques of computer aided engineering " Fundamentals of mechanical systems " Numerical techniques for analysis of mechanical systems " Finite difference method and finite element method.

Download or read book Computer aided Mechanical Design and Analysis written by Vramamurti and published by . This book was released on 1987 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Analysis of Dimensions and Tolerances in Computer aided Mechanical Design written by R. C. Hillyard and published by . This book was released on 1977 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer Aided Analysis of Rigid and Flexible Mechanical Systems written by Manuel F.O. Seabra Pereira and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the edited version of the lectures presented at the NATO ADVANCED STUDY INSTITUTE on "COMPUTER AIDED ANALYSIS OF RIGID AND FLEXIBLE MECHANICAL SYSTEMS". held in Troia. Portugal. from the 27 June to 9 July. 1993. and organized by the Instituto de Engenharia Mecanica. Instituto Superior Tecnico. This ASI addressed the state-of-art in the field of multibody dynamics. which is now a well developed subject with a great variety of formalisms. methods and principles. Ninety five participants. from twenty countries. representing academia. industry. government and research institutions attended this Institute. This contributed greatly to the success of the Institute since it encouraged the interchange of experiences between leading scientists and young scholars and promoted discussions that helped to generate new ideas and to defme directions of research and future developments. The full program of the Institute included also contributed presentations made by participants where different topics have been explored. Such topics include: formulations and numerical aspects in rigid and flexible mechanical systems; object-oriented paradigms; optimal design and synthesis; robotics; kinematics; path planning; control; impact dynamics; and several application oriented developments in weapon systems. vehicles and crash worthiness. These papers have been revised and will be published by Kluwer in a special issue of the Journal of Nonlinear Dynamics and in a forthcoming companion book. This book brings together. in a tutorial and review manner. a comprehensive summary of current work and is therefore suitable for a wide range of interests.

Download or read book Integrated Computer Aided Design of Mechanical Systems written by Shaker A. Meguid and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the author has presented an introduction to the practical application of some of the essential technical topics related to computer-aided engineering (CAE). These topics include interactive computer graphics (ICG), computer-aided design (CAD), computer and computer-integrated manufacturing (CIM). aided analysis (CAA) Unlike the few texts available, the present work attempts to bring all these seemingly specialised topics together and to demonstrate their integration in the design process through practical applications to real engineering problems and case studies. This book is the result of the author's research and teaching activities for several years of postgraduate and undergraduate courses in mechanical design of rotating machinery, computer-aided engineering, of finite elements, solid mechanics, engineering practical applications and properties of materials at Cranfield Institute of dynamics Technology, Oxford Engineering Science and the University of Manchester Institute of Science and Technology (UMIST). It was soon realised that no books on the most powerful and versatile tools available to engineering designers existed. To satisfy this developing need, this book, on the use of computers to aid the design process and to integrate design, analysis and manufacture, was prepared.

Download or read book Computer aided Analysis of Mechanical Systems written by Parviz E. Nikravesh and published by Prentice Hall. This book was released on 1988 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer Aided Design and Manufacturing written by Zhuming Bi and published by John Wiley & Sons. This book was released on 2020-04-06 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broad coverage of digital product creation, from design to manufacture and process optimization This book addresses the need to provide up-to-date coverage of current CAD/CAM usage and implementation. It covers, in one source, the entire design-to-manufacture process, reflecting the industry trend to further integrate CAD and CAM into a single, unified process. It also updates the computer aided design theory and methods in modern manufacturing systems and examines the most advanced computer-aided tools used in digital manufacturing. Computer Aided Design and Manufacturing consists of three parts. The first part on Computer Aided Design (CAD) offers the chapters on Geometric Modelling; Knowledge Based Engineering; Platforming Technology; Reverse Engineering; and Motion Simulation. The second part on Computer Aided Manufacturing (CAM) covers Group Technology and Cellular Manufacturing; Computer Aided Fixture Design; Computer Aided Manufacturing; Simulation of Manufacturing Processes; and Computer Aided Design of Tools, Dies and Molds (TDM). The final part includes the chapters on Digital Manufacturing; Additive Manufacturing; and Design for Sustainability. The book is also featured for being uniquely structured to classify and align engineering disciplines and computer aided technologies from the perspective of the design needs in whole product life cycles, utilizing a comprehensive Solidworks package (add-ins, toolbox, and library) to showcase the most critical functionalities of modern computer aided tools, and presenting real-world design projects and case studies so that readers can gain CAD and CAM problem-solving skills upon the CAD/CAM theory. Computer Aided Design and Manufacturing is an ideal textbook for undergraduate and graduate students in mechanical engineering, manufacturing engineering, and industrial engineering. It can also be used as a technical reference for researchers and engineers in mechanical and manufacturing engineering or computer-aided technologies.

Download or read book Analysis and Design of Machine Elements written by Wei Jiang and published by John Wiley & Sons. This book was released on 2019-01-30 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporating Chinese, European, and International standards and units of measurement, this book presents a classic subject in an up-to-date manner with a strong emphasis on failure analysis and prevention-based machine element design. It presents concepts, principles, data, analyses, procedures, and decision-making techniques necessary to design safe, efficient, and workable machine elements. Design-centric and focused, the book will help students develop the ability to conceptualize designs from written requirements and to translate these design concepts into models and detailed manufacturing drawings. Presents a consistent approach to the design of different machine elements from failure analysis through strength analysis and structural design, which facilitates students’ understanding, learning, and integration of analysis with design Fundamental theoretical topics such as mechanics, friction, wear and lubrication, and fluid mechanics are embedded in each chapter to illustrate design in practice Includes examples, exercises, review questions, design and practice problems, and CAD examples in each self-contained chapter to enhance learning Analysis and Design of Machine Elements is a design-centric textbook for advanced undergraduates majoring in Mechanical Engineering. Advanced students and engineers specializing in product design, vehicle engineering, power machinery, and engineering will also find it a useful reference and practical guide.

Download or read book Computer aided Engineering Design With Solidworks written by Godfrey C Onwubolu and published by World Scientific Publishing Company. This book was released on 2013-03-26 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer-Aided Engineering Design with SolidWorks is designed for students taking SolidWorks courses at college and university, and also for engineering designers involved or interested in using SolidWorks for real-life applications in manufacturing processes, mechanical systems, and engineering analysis. The course material is divided into two parts. Part I covers the principles of SolidWorks, simple and advanced part modeling approaches, assembly modeling, drawing, configurations/design tables, and surface modeling. Part II covers the applications of SolidWorks in manufacturing processes, mechanical systems, and engineering analysis. The manufacturing processes applications include mold design, sheet metal parts design, die design, and weldments. The mechanical systems applications include: routing, piping and tubing, gears, pulleys and chains, cams and springs, mechanism design and analysis, threads and fasteners, hinges, and universal joints. The sections on engineering analysis also include finite element analysis.This textbook is unique because it is one of the very few to thoroughly cover the applications of SolidWorks in manufacturing processes, mechanical systems, and engineering analysis, as presented in Part II.It is written using a hands-on approach in which students can follow the steps described in each chapter to: model and assemble parts, produce drawings, and create applications on their own with little assistance from their instructors during each teaching session or in the computer laboratory. There are pictorial descriptions of the steps involved in every stage of part modeling, assembly modeling, drawing details, and applications presented in this textbook.Supplementary Material(s)For Users (2 MB)/a

Download or read book Computer Aided Analysis and Optimization of Mechanical System Dynamics written by E. J. Haug and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain lectures presented at the NATO-NSF-ARO sponsored Advanced Study I~stitute on "Computer Aided Analysis and Optimization of Mechanical System Dynamics" held in Iowa City, Iowa, 1-12 August, 1983. Lectures were presented by free world leaders in the field of machine dynamics and optimization. Participants in the Institute were specialists from throughout NATO, many of whom presented contributed papers during the Institute and all of whom participated actively in discussions on technical aspects of the subject. The proceedings are organized into five parts, each addressing a technical aspect of the field of computational methods in dynamic analysis and design of mechanical systems. The introductory paper presented first in the text outlines some of the numerous technical considerations that must be given to organizing effective and efficient computational methods and computer codes to serve engineers in dynamic analysis and design of mechanical systems. Two substantially different approaches to the field are identified in this introduction and are given attention throughout the text. The first and most classical approach uses a minimal set of Lagrangian generalized coordinates to formulate equations of motion with a small number of constraints. The second method uses a maximal set of cartesian coordinates and leads to a large number of differential and algebraic constraint equations of rather simple form. These fundamentally different approaches and associated methods of symbolic computation, numerical integration, and use of computer graphics are addressed throughout the proceedings.

Download or read book Computer Aided Analysis and Design of Machine Elements written by Rao V. Dukkipati and published by New Age International. This book was released on 2006 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginning with the formulation of specific design problems, this book goes on explains theories of failure. It considers factors involved in optimization of design, followed by a detailed description of static, transient and dynamic analysis.

Download or read book Machine Design written by Andrew D. Dimarogonas and published by John Wiley & Sons. This book was released on 2000-12-18 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer aided design (CAD) emerged in the 1960s out of the growing acceptance of the use of the computer as a design tool for complex systems. As computers have become faster and less expensive while handling an increasing amount of information, their use in machine design has spread from large industrial needs to the small designer.

Download or read book Principles of Computer aided Design and Manufacturing written by Farid M. L. Amirouche and published by Prentice Hall. This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Computer-Aided Design and Manufacturingis the product of many years of experience teaching courses in computer-aided design (CAD). My first book, published in 1991, was a challenge—the technology was evolving and both the hardware and software were changing rapidly. Since then we have come a long way in the CAD/CAM area, and the prospects are even better for future intelligent systems that will enable engineers to design engineering products more efficiently. From design to development, we are attaining some great achievements that will engineer products that are more competitive and ready to meet the market needs. In essence, CAD will provide the engineer more time for the creative aspects in terms of concept formulation and interpretation of the results derived from the analysis. The tools of CAD/CAM are now more standardized and most of our students today come equipped with the basic engineering graphics knowledge needed to learn advanced engineering tools. Having gone through the experience of teaching this course and at the same time trying to adapt to the changing needs in the laboratory, I have written this book under the premise of providing the students the fundamentals needed to advance their understanding of design, analysis, and product development in manufacturing. The latter is achieved through selection of appropriate topics and analytical methods in all aspects of design that are pertinent to CAD with the hope that students will embrace them with conviction. These topics are written in a clear and concise form, and are followed by examples to guide the students and engineers through a wonderful learning experience. The thrust behind learning and teaching CAD is the ability to reach a level of confidence that will enable oneself to interact with ease with the existing CAD systems to solve engineering problems. My philosophy is to teach through examples; hence, every topic covered is followed by examples to demonstrate the concepts. The basic engineering concepts learned in this book are independent of any specific software. We are at a stage now in which CAD/CAM does not necessary have to be self-contained. Rather, students should be able to use other tools to link or provide additional information as necessary to the CAD system. Where some topics could be supplemented, I have taken the liberty in this textbook of allowing the students to perform their exercises using MATLAB for the sake of understanding that CAD is a multidiscipline in nature and some parts of the design or analysis can be programmed in other languages. This is becoming a common practice as vendors are making it simpler and easier to transport files from different systems, and in some cases even be able to integrate different analysis tools to provide the students and engineers the ability to interact with their software to meet their engineering needs. This is certainly true in the variational design and parametric designs areas in which engineering equations are the engine behind the geometrical formulation and design of certain products. This textbook is written to satisfy the CAD requirements courses even though finite element coverage expands beyond the introduction of truss analysis. It is difficult to cover all topics in one semester. Topics should be selected to meet the course needs and the laboratory requirements that go with it. For example, at the University of Illinois at Chicago, we have a required laboratory part of the course where students are given different projects on weekly basis to become proficient in the use of CAD software such as ProE or IDEAS. The last lab projects are more involved and usually require some forms of analysis and animation. My intention is to provide additional topics in finite elements that will allow the instructor to focus not only on simple trusses but also be able to teach heat conduction, basic principles in FEM, and even vibration to broaden the scope of analysis. The idea is one that allows our senior students to be exposed to FEM by combining most of what they have learned and show how it can be done with the help of this powerful technique of FEM. This has been very successful with our undergraduate students and first-year graduate students because they are able to use this textbook to learn the basic concepts required in analysis to be able to use finite element tools such as ANSYS, IDEAS, and CATIA, among others. The book is divided into 15 chapters and provides a unique balance of topics that cover design, 3D transformation and geometry manipulation, surface creations, solid modeling, optimization, finite elements, robotics and robot economics, and CAM implementation. Chapter 1 provides a historical perspective of CAD and discusses virtual reality as it is used in our current engineering environment (the latter is a topic that will need to be explored further down the road). Chapter 2 addresses the different stages in design and provides concrete examples showing how these steps can be accomplished. The unique feature of this chapter is the parametric and variational design concept. In this textbook I have made an effort to enlighten the students with the need for these techniques to be taken seriously as they might become standard in the near future. The blending of man and machine is an effective tool when CAD systems are allowed to participate in the design and manufacturing process by aiding in the problem formulation, synthesis, conceptualization, and, of course, analysis. Once the students have had some exposure to CAD in general, Chapter 2 could be covered at any part of the course. I urge the instructors and readers to take the time and go over these examples and to create their own examples to appreciate the benefits of these tools. Chapter 3 discusses 2D and 3D transformations and geometry manipulation, and provides an in-depth analysis of images in 2D and 3D, and includes isometric views. Chapter 4 explains the fundamentals underlying splines, parametric and nonparametric curves, and Bezier curves and surfaces. A number of examples are included to assist the students in understanding how the concepts are implemented. Depending on how advanced the students are, selected topics can be skipped or simply assigned as additional material for the class. Chapter 5 introduces the concept of solid modeling and the various construction techniques and representation schemes in modeling. The students will apply some of these concepts in their lab work working with the making of solid models in CAD. Chapter 6 covers various techniques of optimization and introduces the students to the basic concepts of how to formulate an objective function, define the appropriate constraints, and choose the analytical tools to solve the problem. This chapter also focuses on popular techniques in optimization so that senior students and first-year graduate students will have some familiarity with their use. Chapters 7 through 10 form a unique combination of teaching the finite element method to our junior and senior students without the burden of heavy calculus. It is one of the major strengths of this textbook. If a curriculum is more focused on analysis, all chapters can be covered; otherwise, the instructor is given the choice of covering FEM by selecting the appropriate topics) for the class. This would include stress analysis, heat conduction, dynamic analysis, and vibration, or simply teaching the basic formulation of FEM as described in Chapter 7. The examples solved in these chapters represent real applications and will encourage the students to develop a good appetite for FEM. Computer-aided manufacturing is introduced in Chapters 11 through 15. I have opted to focus on key topics of interest to the students such as robotics and economic impact, group technology, and computer-integrated manufacturing. These are some of the features that need to be understood in the integration of CAD and CAM. Principles of Computer-Aided Design and Manufacturingis written for junior and senior level students and first-year graduate students who have had little exposure to computer-aided design. This textbook assumes that the students have some experience with programming and understand basic concepts in CAD found in a freshman course of graphics. This textbook is suitable for students who have had all their undergraduate requirements in their major. The latter is an incentive whereby students will fully appreciate the benefits of design techniques such as parametric and variational design and develop a deep understanding of how FEM works and how it is applied to various engineering applications. I am indebted to the reviewers for their useful comments and suggestions, which helped shape the content and focus of this book: Dr. Heana Costea, California State University at Northridge; Derek M. Yip-Hoi, University of Michigan at Ann Arbor; and Gregory Kremer, Ohio State University. I would also like to thank Dr. M. Ayub, visiting professor in the Civil Engineering Department at University of Chicago at Illinois, for taking the time to edit several chapters and provide his insight for the book and M. Arif, associate professor in the Civil Engineering Department at University of Chicago at Illinois, for his encouragement and support. The comments and suggestions of the reviewers were instrumental in my final revision and in selecting additional topics that were missing from the original proposal. They kindly helped review my original manuscript and assisted me in looking at their course focus and syllabus to get a better picture of how the CAD course is taught at their respective institutions. Finally, I am indebted to all my students who have assisted me in the preparation of necessary materials for this book; without their help, this wouldn't have been possible. In particular, I would like to thank Carlos Lopez for his efforts on the parametric and variational designs section of the book. I also like to thank Francisco Romero, Nagarajan Chandra, Pedro Gonzalez, and David McNeil for their genuine effort in assisting with some of the graphics of the book. I would like to thank Nikhil Khulka and Ivan Zivkovic for being there when I needed them the most to meet the publisher deadlines and organize the chapters and figures selected for the book. I also would like to thank Surya Pratar for helping with indexing of this book. Finally, let me take this opportunity to thank the editorial staff, Dorothy Marrero, David George, and Lynda Castillo at Prentice Hall, for their patience during the course of the production of the book. I had the pleasure of working closely with Kevin Bradley at Sunflower Publishing Services, who oversaw the complete publication of the book. He was kind and very responsive to all my questions. He worked intelligently to make sure I was happy with the changes and the editing of my book. At the end I would like to thank my family, Ginger, Larby, and Anissa, for their unconditional love and support and for their understanding in the sacrifices we make in achieving our objectives. In particular, I would like to thank my mom and dad for giving me hope, guidance, and values to treasure for years to come. FARID AMIROUCHE The Department of Mechanical & Industrial Engineering University of Illinois, Chicago

Download or read book Computer Aided Design and Manufacturing written by M.M.M. SARCAR and published by PHI Learning Pvt. Ltd.. This book was released on 2008-05-05 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: The impact of the technology of Computer-Aided Design and Manufacturing in automobile engineering, marine engineering and aerospace engineering has been tremendous. Using computers in manufacturing is receiving particular prominence as industries seek to improve product quality, increase productivity and to reduce inventory costs. Therefore, the emphasis has been attributed to the subject of CAD and its integration with CAM. Designed as a textbook for the undergraduate students of mechanical engineering, production engineering and industrial engineering, it provides a description of both the hardware and software of CAD/CAM systems. The Coverage Includes  Principles of interactive computer graphics  Wireframe, surface and solid modelling  Finite element modelling and analysis  NC part programming and computer-aided part programming  Machine vision systems  Robot technology and automated guided vehicles  Flexible manufacturing systems  Computer integrated manufacturing  Artificial intelligence and expert systems  Communication systems in manufacturing PEDAGOGICAL FEATURES  CNC program examples and APT program examples  Review questions at the end of every chapter  A comprehensive Glossary  A Question Bank at the end of the chapters