Download or read book Computer aided Design of Extrusion Dies for Thermoplastics written by Julius Yao Badu and published by . This book was released on 1976 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Extrusion Dies for Plastics and Rubber written by Christian Hopmann and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2017-04-10 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This definitive book provides a comprehensive account of the full range of dies used for extrusion of plastics and elastomers. The distinctive features of the various types of dies are described in detail. Expert advice on the configuration of dies is given, and the possibilities of computer-aided design, as well as its limitations, are demonstrated. Fundamentals and computational procedures are clearly explained so that no special prior knowledge of the subject is required. The mechanical configuration, handling, and maintenance of extrusion dies are described. Calibration procedures for pipes and profiles are also discussed. This book was written for plastics engineers who need daily support in their practical work in industry and science, as well as for students preparing for their professional life. The 4th edition is brought up to date with several important additions, including coverage of multilayer (>15 layer) dies, melt encapsulation, and simulation tools (rheological/thermal CFD simulations).

Download or read book Extrusion Dies for Plastics and Rubber written by Walter Michaeli and published by Hanser Gardner Publications. This book was released on 2003 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of this well-received book provides a comprehensive account of the full range of dies used for extrusion of plastics and elastomers. The distinctive features of the various types of dies are described in detail. Advice on the configuration of dies is given, and the possibilities of computer-aided design, as well as its limitations, are demonstrated. The fundamentals and computational procedures are well explained so that the reader does not need any special prior knowledge of the subject. The mechanical configuration, handling, and maintenance of extrusion dies are described. Calibration procedures for pipes and profiles are also dealt with. This book was written for plastics engineers who need daily support in their practical work in industry and science as well for students preparing for their professional life.

Download or read book Computer Aided Design of Extrusion Dies written by Arun Vedhanayagam and published by . This book was released on 1985 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer Aided Design and Analysis of Polymer Flows in Three Dimensional Extrusion Dies written by Bhavin V. Mehta and published by . This book was released on 1992 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Extrusion Dies written by Walter Michaeli and published by . This book was released on 1984 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer aided Analysis and Design for Extrusion Dies written by Fock Lee Heng and published by . This book was released on 1987 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Die Design for Extrusion of Plastic Tubes and Pipes written by Sushil Kainth and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2017-11-06 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Die Design for Extrusion of Plastic Tubes and Pipes" covers this topic from a uniquely practical perspective. The content draws on the author's over 50 years of experience in the plastics processing industry, most recently as head of the successful extrusion die manufacturing company he established in 1995. His approach is oriented toward solving production problems at the design stage using computer aided techniques for design and simulation of the plastic flow. The book provides a step-by-step guide to extrusion die design, with worked examples to illustrate problem solving. It is shown how important melt flow variables (e.g., pressure drop, shear stress, shear rate, temperature variations, and distribution variations, etc.) of key materials are determined using FEM software. The detailed drawings of complete dies for various applications that are provided constitute a rare and valuable resource. Both mono- and multilayer pipes are covered. Using the proven methods and examples from this book, the reader is well-equipped to understand dies for successful manufacture of tubes and pipes of many types. Contents: Basic Considerations Project Planning Design of a Simple Die Simulation of Melt Flow Spiral Die Monolayer Die for Tubes ∅1 mm to ∅6 mm Monolayer Die for Tubes ∅4 mm to ∅16 mm Monolayer Die for Pipes ∅50 mm to ∅125 mm Monolayer Die for Pipes ∅140 mm to ∅315 mm Coextrusion Pipe Dies Coextrusion Die (∅5 mm to ∅16 mm) Coextrusion Three-Layer Die (∅20 mm to ∅65 mm) Three-Layer-Plus-Striping Die for ∅25 mm to ∅110 mm Pipes Materials for Extrusion Dies

Download or read book Extrusion Dies written by Walter Michaeli and published by . This book was released on 1986-12-01 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Extrusion Dies for Plastics and Rubber written by Walter Michaeli and published by Hanser Gardner Publications. This book was released on 1992-10 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental and computational procedures are described. Attention is given to theoretical tools. The mechanical configuration, handling, and maintenance are discussed.

Download or read book Computer Aided Manufacturing of Streamlined Extrusion Dies written by Hasmukh K. Patel and published by . This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Extrusion Dies for Plastics and Rubber written by Walter Michaeli and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design Analysis of Extrusion Dies by Interfacing a Commercial CAD CAM system with a Digital Computer written by Tom Borje Nikander and published by . This book was released on 1983 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer Aided Manufacture of Streamlined Extrusion Dies written by M. Janaka. K. Jayasuriya and published by . This book was released on 1985 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer aided Design and Manufacturing for Extrusion of Aluminum Titanium and Steel Structural Parts written by Vijay Nagpal and published by . This book was released on 1976 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: The overall objective of this program was to develop practical computer-aided design and manufacturing (CAD/CAM) techniques for extrusion of aluminum alloys, steels, and titanium alloys. This report covers the Phase-I work conducted in this program. This work was completed by performing the following major tasks: (a) review the present state of the art in extrusion die design and characterize the most commonly used extruded shapes, (b) divide these shapes into geometric modules and develop the CAD/CAM techniques for extruding a modular shape, (c) expand the results of the analysis, developed for a modular shape, to more practical simple shapes, such as L's, T's, and rectangles, and (d) perform extrusion trials with a rectangular shape to demonstrate the validity of CAD/CAM techniques. In order to enhance readability, the results of Phase-I work are presented in the form of three chapters as follows: (1) Die Design for Extrusion of Structural Shapes, (2) CAD/CAM of a Streamlined Die for a Modular Shape, (3) CAD/CAM of Streamlined Dies for Lubricated Extrusion of Simple Structural Shapes. (Author).

Download or read book Design of Extrusion Forming Tools written by Olga Carneiro and published by Smithers Rapra. This book was released on 2012-12-19 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of extrusion forming tools (dies and calibrators) is a difficult task usually performed by the employment of experimental trial-and-error procedures, which can hinder the performance and cost of the tools, may increase the time to market of new extruded products and limit their complexity.This book provides detailed information on the design of extrusion forming tools. It describes the main problems to be faced when designing dies and calibrators, the most relevant polymer properties to be considered in the design process, the specific problems related to several types of conventional extrusion dies, and recent developments on the design of special dies and process modeling. It is an updated and unique book on the subject, where each chapter is prepared by internationally recognized experts. Having in mind its nature, it is expected to become a useful reference book for higher education students (both undergraduate and graduate ones), teachers, researchers and engineers active in the extrusion industry.

Download or read book Development of CAD System for Extrusion Dies written by M Abo and published by . This book was released on 1990 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: