Download or read book Computer Aided Design Manufacturing Modeling and Simulation II written by Fang Yin Cheng and published by Trans Tech Publications Ltd. This book was released on 2012-12-13 with total page 1400 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the 2nd International Conference on Computer-Aided Design, Manufacturing, Modeling and Simulation (CDMMS 2012), held during the 21st to 23rd September 2012 in Chongqing, China, present original ideas and exciting new findings in disciplines such as CAD, CAM, Manufacturing, Mechanical Engineering, Modeling and Simulation.

Download or read book Computer Aided Design Manufacturing Modeling and Simulation written by Xin Gui He and published by Trans Tech Publications Ltd. This book was released on 2011-08-22 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). The aim of this special volume was to facilitate the exchange of information concerning the best practices for CAD, CAM, Manufacturing, Mechanical Engineering, Modeling and Simulation, etc. It provided the opportunity for engineers and scientists in academia, industry, and government to address the most innovative research and developments, including technical challenges, social and economic issues, and to discuss ideas, results, work-in-progress and experience touching all aspects of Computer-Aided Design, Manufacturing, Modeling and Simulation.

Download or read book Computer Aided Design Manufacturing Modeling and Simulation written by and published by . This book was released on 2011 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this special volume was to facilitate the exchange of information concerning the best practices for CAD, CAM, Manufacturing, Mechanical Engineering, Modeling and Simulation, etc. It provided the opportunity for engineers and scientists in academia, industry, and government to address the most innovative research and developments, including technical challenges, social and economic issues, and to discuss ideas, results, work-in-progress and experience touching all aspects of Computer-Aided Design, Manufacturing, Modeling and Simulation. Review from Book News Inc.: The 140 papers selected for the September 2011 conference share research on advanced manufacturing technology, modeling nanosystems, intelligent design, adaptive control, scheduling, and power electronics. The second volume of the two-volume set focuses on software development, system optimization, vibrations and dynamics, sustainable materials, and virtual manufacturing. The Chinese contributors propose a feature extraction method for mechanical part recognition, an assembly matrix for aircraft components, a boiler temperature field reconstruction algorithm, and an absolute magnetic grid displacement sensor. Other topics include heat and moisture transfer in environmental clothing, wind turbine blade design, mine emergency rescue paths, and digital watermarking for CAD models. B & w images are provided.

Download or read book Computer Aided Design Manufacturing Modeling and Simulation IV written by Mao De Ma and published by Trans Tech Publications Ltd. This book was released on 2014-10-01 with total page 1150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the4th International Conference on Computer-Aided Design, Manufacturing, Modeling and Simulation (CDMMS 2014), September 13-15, 2014, Chongqing, China. The 227 papers are grouped as follows: Chapter 1: Advanced Developments of CAx, Modelling and Simulation Technologies in Manufacturing, Chapter 2: Advanced Technologies in Modeling, Simulation, Analysis and Design of Various Modern Industries, Chapter 3: Information System Design and Development, Networks Applications, Modern Methods of Intelligent Automation, Data Mining and Processing, Chapter 4: Serving Subsystem in CAx, Data Management and Control, Chapter 5: Modern and Advanced Technologies in Mechanical and Manufacturing Engineering, Chapter 6: Methodologies, Devices and Embedded Tools, Technologies of Measurement, Diagnosis and Testing, Chapter 7: Power, Electric and Electronics Engineering, Chapter 8: Materials Engineering and Technologies, Applications, Chapter 9: Modern Technologies of Environment Engineering, Energy Saving and Ecology

Download or read book Computer Aided Design and Manufacturing written by Zhuming Bi and published by John Wiley & Sons. This book was released on 2020-02-04 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broad coverage of digital product creation, from design to manufacture and process optimization This book addresses the need to provide up-to-date coverage of current CAD/CAM usage and implementation. It covers, in one source, the entire design-to-manufacture process, reflecting the industry trend to further integrate CAD and CAM into a single, unified process. It also updates the computer aided design theory and methods in modern manufacturing systems and examines the most advanced computer-aided tools used in digital manufacturing. Computer Aided Design and Manufacturing consists of three parts. The first part on Computer Aided Design (CAD) offers the chapters on Geometric Modelling; Knowledge Based Engineering; Platforming Technology; Reverse Engineering; and Motion Simulation. The second part on Computer Aided Manufacturing (CAM) covers Group Technology and Cellular Manufacturing; Computer Aided Fixture Design; Computer Aided Manufacturing; Simulation of Manufacturing Processes; and Computer Aided Design of Tools, Dies and Molds (TDM). The final part includes the chapters on Digital Manufacturing; Additive Manufacturing; and Design for Sustainability. The book is also featured for being uniquely structured to classify and align engineering disciplines and computer aided technologies from the perspective of the design needs in whole product life cycles, utilizing a comprehensive Solidworks package (add-ins, toolbox, and library) to showcase the most critical functionalities of modern computer aided tools, and presenting real-world design projects and case studies so that readers can gain CAD and CAM problem-solving skills upon the CAD/CAM theory. Computer Aided Design and Manufacturing is an ideal textbook for undergraduate and graduate students in mechanical engineering, manufacturing engineering, and industrial engineering. It can also be used as a technical reference for researchers and engineers in mechanical and manufacturing engineering or computer-aided technologies.

Download or read book Computer Aided Design Manufacturing Modeling and Simulation III written by Mao De Ma and published by Trans Tech Publications Ltd. This book was released on 2013-10-31 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 3rd International Conference on Computer-Aided Design, Manufacturing, Modeling and Simulation (CDMMS 2013), September 21-23, 2013, Chongqing, China. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 151 papers are grouped as follows: Chapter 1: Virtual and Computer Design, Modeling and Simulation Technology; Chapter 2: Engineering and Manufacturing Technology; Chapter 3: Friction, Vibration and Dynamics; Chapter 4: Digital Surveillance and Security Management; Chapter 5: Power, Energy and Environment Engineering; Chapter 6: Control, Automation and Sensors; Chapter 7: Communication Technology; Chapter 8: Information Computing and Networks; Chapter 9: Materials and Technology of Production; Chapter 10: Mineral Resources and Logistics; Chapter 11: Related Topics

Download or read book Computer aided design manufacturing modeling and simulation selected peer reviewed papers from the International Conference on Computer Aided Design Manufacturing Modeling and Simulation CDMMS 2011 September 13 16 2011 Hangzhou China written by Xingui He and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer Aided Design and Manufacturing written by Zhuming Bi and published by John Wiley & Sons. This book was released on 2020-04-06 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broad coverage of digital product creation, from design to manufacture and process optimization This book addresses the need to provide up-to-date coverage of current CAD/CAM usage and implementation. It covers, in one source, the entire design-to-manufacture process, reflecting the industry trend to further integrate CAD and CAM into a single, unified process. It also updates the computer aided design theory and methods in modern manufacturing systems and examines the most advanced computer-aided tools used in digital manufacturing. Computer Aided Design and Manufacturing consists of three parts. The first part on Computer Aided Design (CAD) offers the chapters on Geometric Modelling; Knowledge Based Engineering; Platforming Technology; Reverse Engineering; and Motion Simulation. The second part on Computer Aided Manufacturing (CAM) covers Group Technology and Cellular Manufacturing; Computer Aided Fixture Design; Computer Aided Manufacturing; Simulation of Manufacturing Processes; and Computer Aided Design of Tools, Dies and Molds (TDM). The final part includes the chapters on Digital Manufacturing; Additive Manufacturing; and Design for Sustainability. The book is also featured for being uniquely structured to classify and align engineering disciplines and computer aided technologies from the perspective of the design needs in whole product life cycles, utilizing a comprehensive Solidworks package (add-ins, toolbox, and library) to showcase the most critical functionalities of modern computer aided tools, and presenting real-world design projects and case studies so that readers can gain CAD and CAM problem-solving skills upon the CAD/CAM theory. Computer Aided Design and Manufacturing is an ideal textbook for undergraduate and graduate students in mechanical engineering, manufacturing engineering, and industrial engineering. It can also be used as a technical reference for researchers and engineers in mechanical and manufacturing engineering or computer-aided technologies.

Download or read book Computer Aided Design Engineering and Manufacturing written by Cornelius T. Leondes and published by CRC Press. This book was released on 2019-08-21 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the competitive business arena companies must continually strive to create new and better products faster, more efficiently, and more cost effectively than their competitors to gain and keep the competitive advantage. Computer-aided design (CAD), computer-aided engineering (CAE), and computer-aided manufacturing (CAM) are now the industry standa

Download or read book Introducing Technology Computer Aided Design TCAD written by Chinmay K. Maiti and published by CRC Press. This book was released on 2017-03-16 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This might be the first book that deals mostly with the 3D technology computer-aided design (TCAD) simulations of major state-of-the-art stress- and strain-engineered advanced semiconductor devices: MOSFETs, BJTs, HBTs, nonclassical MOS devices, finFETs, silicon-germanium hetero-FETs, solar cells, power devices, and memory devices. The book focuses on how to set up 3D TCAD simulation tools, from mask layout to process and device simulation, including design for manufacturing (DFM), and from device modeling to SPICE parameter extraction. The book also offers an innovative and new approach to teaching the fundamentals of semiconductor process and device design using advanced TCAD simulations of various semiconductor structures. The simulation examples chosen are from the most popular devices in use today and provide useful technology and device physics insights. To extend the role of TCAD in today’s advanced technology era, process compact modeling and DFM issues have been included for design–technology interface generation. Unique in approach, this book provides an integrated view of silicon technology and beyond—with emphasis on TCAD simulations. It is the first book to provide a web-based online laboratory for semiconductor device characterization and SPICE parameter extraction. It describes not only the manufacturing practice associated with the technologies used but also the underlying scientific basis for those technologies. Written from an engineering standpoint, this book provides the process design and simulation background needed to understand new and future technology development, process modeling, and design of nanoscale transistors. The book also advances the understanding and knowledge of modern IC design via TCAD, improves the quality in micro- and nanoelectronics R&D, and supports the training of semiconductor specialists. It is intended as a textbook or reference for graduate students in the field of semiconductor fabrication and as a reference for engineers involved in VLSI technology development who have to solve device and process problems. CAD specialists will also find this book useful since it discusses the organization of the simulation system, in addition to presenting many case studies where the user applies TCAD tools in different situations.

Download or read book Practical Guide to Digital Manufacturing written by Zhuming Bi and published by Springer Nature. This book was released on 2021-05-24 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the subject of digital manufacturing. It provides a practical guide for readers on using computer aided design (CAD), computer aided engineering (CAE) and computer aided manufacturing (CAM) and other computer assistive tools for the design of products, machines, processes and system integrations through the case studies of engineering projects. The book introduces a thorough theoretical foundation and discussion of the historical development, and enabling technologies of digital manufacturing. It also covers a broad range of computer aided tools for a variety of applications including: geometric modelling; assembly modelling; motion simulation; finite element analysis; manufacturing process simulation; machining programming; product data management; and, product lifecycle management. Practical Guide to Digital Manufacturing uses many real-world case studies to illustrate the discussed applications, making it easily readable for undergraduate and graduate students, as well as engineers with the needs of computer-aided design and manufacturing knowledge and skills.

Download or read book Computer Aided Process and Product Engineering CAPE written by Luis Puigjaner and published by John Wiley & Sons. This book was released on 2007-01-02 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer aided process engineering (CAPE) tools have been very successfully used in process design and product engineering for a long time. In particular, simulation and modelling tools have enabled engineers to analyse and understand the behaviour of selected processes prior to building actual plants. The aim of design or retrofit of chemical processes is to produce profitably products that satisfy the societal needs, ensuring safe and reliable operation of each process, as well as minimising any effects on the environment. This involves the conceptual design or retrofit of plants and processes, novel manufacturing approaches, process/control system design interactions and operability, manufacturability, environmental and safety issues. Backed by current studies, this 2-volume set gives a comprehensive survey of the various approaches and latest developments on the use of CAPE in the process industry. An invaluable reference to the scientific and industrial community in the field of computer aided process and product engineering.

Download or read book Technology Computer Aided Design written by Chandan Kumar Sarkar and published by CRC Press. This book was released on 2018-09-03 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Responding to recent developments and a growing VLSI circuit manufacturing market, Technology Computer Aided Design: Simulation for VLSI MOSFET examines advanced MOSFET processes and devices through TCAD numerical simulations. The book provides a balanced summary of TCAD and MOSFET basic concepts, equations, physics, and new technologies related to TCAD and MOSFET. A firm grasp of these concepts allows for the design of better models, thus streamlining the design process, saving time and money. This book places emphasis on the importance of modeling and simulations of VLSI MOS transistors and TCAD software. Providing background concepts involved in the TCAD simulation of MOSFET devices, it presents concepts in a simplified manner, frequently using comparisons to everyday-life experiences. The book then explains concepts in depth, with required mathematics and program code. This book also details the classical semiconductor physics for understanding the principle of operations for VLSI MOS transistors, illustrates recent developments in the area of MOSFET and other electronic devices, and analyzes the evolution of the role of modeling and simulation of MOSFET. It also provides exposure to the two most commercially popular TCAD simulation tools Silvaco and Sentaurus. • Emphasizes the need for TCAD simulation to be included within VLSI design flow for nano-scale integrated circuits • Introduces the advantages of TCAD simulations for device and process technology characterization • Presents the fundamental physics and mathematics incorporated in the TCAD tools • Includes popular commercial TCAD simulation tools (Silvaco and Sentaurus) • Provides characterization of performances of VLSI MOSFETs through TCAD tools • Offers familiarization to compact modeling for VLSI circuit simulation R&D cost and time for electronic product development is drastically reduced by taking advantage of TCAD tools, making it indispensable for modern VLSI device technologies. They provide a means to characterize the MOS transistors and improve the VLSI circuit simulation procedure. The comprehensive information and systematic approach to design, characterization, fabrication, and computation of VLSI MOS transistor through TCAD tools presented in this book provides a thorough foundation for the development of models that simplify the design verification process and make it cost effective.

Download or read book Computer Aided Design Engineering and Manufacturing written by Cornelius T. Leondes and published by CRC Press. This book was released on 2019-04-30 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the competitive business arena companies must continually strive to create new and better products faster, more efficiently, and more cost effectively than their competitors to gain and keep the competitive advantage. Computer-aided design (CAD), computer-aided engineering (CAE), and computer-aided manufacturing (CAM) are now the industry standa

Download or read book CAD 3D Modeling Engineering Analysis and Prototype Experimentation written by Jeremy Zheng Li and published by Springer. This book was released on 2014-08-26 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This succinct book focuses on computer aided design (CAD), 3-D modeling, and engineering analysis and the ways they can be applied effectively in research and industrial sectors including aerospace, defense, automotive, and consumer products. These efficient tools, deployed for R&D in the laboratory and the field, perform efficiently three-dimensional modeling of finished products, render complex geometrical product designs, facilitate structural analysis and optimal product design, produce graphic and engineering drawings, and generate production documentation. Written with an eye toward green energy installations and novel manufacturing facilities, this concise volume enables scientific researchers and engineering professionals to learn design techniques, control existing and complex issues, proficiently use CAD tools, visualize technical fundamentals, and gain analytic and technical skills. This book also: · Equips practitioners and researchers to handle powerful tools for engineering design and analysis using many detailed illustrations · Emphasizes important engineering design principles in introducing readers to a range of techniques · Includes tutorials providing readers with appropriate scaffolding to accelerate their learning process · Adopts a product development, cost-consideration perspective through the book’s many examples

Download or read book Modeling and Simulation in Manufacturing and Defense Acquisition written by National Research Council and published by National Academies Press. This book was released on 2002-07-01 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Committee on Modeling and Simulation Enhancements for 21st Century Manufacturing and Acquisition was formed by the NRC in response to a request from the Defense Modeling and Simulation Office (DMSO) of DOD. The committee was asked to (1) investigate next-generation evolutionary and revolutionary M&S capabilities that will support enhanced defense systems acquisition; (2) identify specific emerging design, testing, and manufacturing process technologies that can be enabled by advanced M&S capabilities; (3) relate these emerging technologies to long-term DOD requirements; (4) assess ongoing efforts to develop advanced M&S capabilities and identify gaps that must be filled to make the emerging technologies a reality; (5) identify lessons learned from industry; and (6) recommend specific government actions to expedite development and to enable maximum DOD and U.S. commercial benefit from these capabilities. To complete its task, the committee identified relevant trends and their impact on defense acquisition needs; current use and support for use of M&S within DOD; lessons learned from commercial manufacturing; three cross-cutting and especially challenging uses of M&S technologies; and the areas in which basic research is needed in M&S in order to achieve the desired goals for manufacturing and defense acquisition.

Download or read book Computer Aided Design Engineering and Manufacturing written by Cornelius T. Leondes and published by CRC Press. This book was released on 2019-08-21 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the competitive business arena organizations must continually strive to create new and better products faster, more efficiently, and more cost effectively than competitors to gain and keep the competitive advantage. Computer-aided design (CAD), computer-aided engineering (CAE), and computer-aided manufacturing (CAM) are now the industry standard, in all major industries. The seven volumes in Computer-Aided Design, Engineering, and Manufacturing: Systems Techniques, and Manufacturing provide a comprehensive treatment of the techniques and applications of CAD, CAE, and CAM.