Download or read book Computer Aided Cmm Inspection Planning and Verification written by Anis Limaiem and published by LAP Lambert Academic Publishing. This book was released on 2011-10 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inspection planning and verification procedures are central activities in any inspection using Coordinates Measuring Machines (CMMs). The objective of tactile CMM inspection planning is to establish the best sequence of inspection steps with a detailed inspection procedure for each inspection feature or cluster of measurement points. Algorithms are then used to interpolate these points and generate their mathematical model(s). Complex surfaces may need to be decomposed into several patches which are interpolated separately then joined in a single model by determining their intersections. These models (curves and surfaces) are then used by tolerance analysis algorithms to verify if tolerance specifications are met by comparing the interpolated model representing the actual surface and the CAD model representing the theoretical surface.
Download or read book Computer Aided Inspection Planning written by Abdulrahman Al-Ahmari and published by CRC Press. This book was released on 2016-12-19 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: The inspection process is one of the most important steps in manufacturing industries because it safeguards high quality products and customer satisfaction. Manual inspection may not provide the desired accuracy. This book introduces and implements a new methodology and develops the supporting technologies for automated inspection planning based on Computer Aided Design (CAD) models. It also provides and implements an efficient link for automated operation based on Coordinate Measuring Machine (CMM). The link’s output is a DMIS code programming file based on the inspection planning table that is executed on CMM.
Download or read book An Intelligent Inspection Planning System for Prismatic Parts on CMMs written by Slavenko M. Stojadinović and published by Springer. This book was released on 2019-02-09 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines an intelligent system for the inspection planning of prismatic parts on coordinate measuring machines (CMMs). The content focuses on four main elements: the engineering ontology, the model of inspection planning for prismatic parts on CMMs, the optimisation model of the measuring path based on an ant-colony approach, and the model of probe configuration and setup planning based on a genetic algorithm. The model of inspection planning for CMMs developed here addresses inspection feature construction, the sampling strategy, probe accessibility analysis, automated collision-free operation, and probe path planning. The proposed model offers a novel approach to intelligent inspection, while also minimizing human involvement (and thus the risk of human error) through intelligent planning of the probe configuration and part setup. The advantages of this approach include: reduced preparation times due to the automatic generation of a measuring protocol; potential optimisation of the measuring probe path, i.e., less time needed for the actual measurement; and increased planning process autonomy through minimal human involvement in the setup analysis and probe configuration.
Download or read book Geometric Design Tolerancing Theories Standards and Applications written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of proper geometric dimensioning and tolerancing as a means of expressing the designer's functional intent and controlling the inevitable geometric and dimensional variations of mechanical parts and assemblies, is becoming well recognized. The research efforts and innovations in the field of tolerancing design, the development of supporting tools, techniques and algorithms, and the significant advances in computing software and hardware all have contributed to its recognition as a viable area of serious scholarly contributions. The field of tolerancing design is successfully making the transition to maturity where deeper insights and sound theories are being developed to offer explanations, and reliable implementations are introduced to provide solutions. Machine designers realized very early that manufacturing processes do not produce the nominal dimensions of designed parts. The notion of associating a lower and an upper limit, referred to as tolerances, with each dimen sion was introduced. Tolerances were specified to ensure the proper function of mating features. Fits of mating features included clearances, location fits, and interference fits, with various sub-grades in each category assigned a tolerance value depending on the nominal size of the mating features. During the inspection process, a part is rejected if a dimension fell outside the specified range. As the accuracy requirements in assemblies became tighter, designers had to consider other critical dimensions and allocate tolerances to them in order to ensure the assembly's functionality.
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1994 with total page 1162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of 3rd International Conference on the Industry 4 0 Model for Advanced Manufacturing written by Jun Ni and published by Springer. This book was released on 2018-05-08 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 3rd International Conference on the Industry 4.0 Model for Advanced Manufacturing (AMP 2018), held in Belgrade, Serbia, on 5–7 June 2018, the latest in a series of high-level conferences that brings together experts from academia and industry to exchange knowledge, ideas, experiences, research findings, and information in the field of manufacturing. The book addresses a wide range of topics, including, for example, design of smart and intelligent products, developments in CAD/CAM technologies, rapid prototyping and reverse engineering, multistage manufacturing processes, manufacturing automation in the Industry 4.0 model, cloud-based products, and cyber-physical and reconfigurable manufacturing systems. By providing updates on key issues and recent advances in manufacturing engineering and technologies, it aids the transfer of vital knowledge to the next generation of academics and practitioners. It appeals to anyone working or conducting research in this rapidly evolving field.
Download or read book Coordinate Measuring Machines and Systems written by John A. Bosch and published by CRC Press. This book was released on 1995-04-10 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work reviews the basic concepts of co-ordinate metrology. It defines what co-ordinate measuring machines (CMMs) are and details how they can be applied to gain a competitive advantage in a variety of business settings, from small machine shops to global manufacturers. Areas that are critical for the successful application of CMMs - including environmental factors, the measuring of speed and accuracy, traceability, versatility and programming methodology - are considered.;The book is intended for manufacturing, mechanical, quality control, design, industrial, automation, automotive and aerospace engineers and managers, as wel as upper-level undergraduate and graduate students in these disciplines.;College or university bookstores may order five or more copies at a special student price, which is available from Marcel Dekker Inc upon request.
Download or read book Proceedings of the 36th International MATADOR Conference written by Srichand Hinduja and published by Springer Science & Business Media. This book was released on 2010-08-05 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented here are 130 refereed papers given at the 36th MATADOR Conference held at The University of Manchester in July 2010. The MATADOR series of conferences covers the topics of Manufacturing Automation and Systems Technology, Applications, Design, Organisation and Management, and Research. The proceedings of this Conference contain original papers contributed by researchers from many countries on different continents. The papers cover the principles, techniques and applications in aerospace, automotive, biomedical, energy, consumable goods and process industries. The papers in this volume reflect: • the importance of manufacturing to international wealth creation; • the emerging fields of micro- and nano-manufacture; • the increasing trend towards the fabrication of parts using lasers; • the growing demand for precision engineering and part inspection techniques; and • the changing trends in manufacturing within a global environment.
Download or read book Computer Aided Fixture Design written by Yiming (Kevin) Rong and published by CRC Press. This book was released on 1999-04-20 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illustrates recently developed fixture design and verification technology, focusing on their central role in manufacturing processes. The text uses up-to-date computer technology to minimize costs, increase productivity and assure product quality. It presents advanced data and analysis that is directly applicable to development of comprehensive computer-aided modular fixture design system.
Download or read book Coordinate Measuring Machines and Systems written by Robert J. Hocken and published by CRC Press. This book was released on 2016-04-19 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since John Bosch edited and published the first version of this book in 1995, the world of manufacturing and coordinate measuring machines (CMMs) and coordinate measuring systems (CMSs) has changed considerably. However, the basic physics of the machines has not changed in essence but have become more deeply understood. Completely revised and updat
Download or read book Smart VR AR MR Systems for Professionals written by Karupppasamy Subburaj and published by CRC Press. This book was released on 2024-02-02 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart VR/AR/MR Systems for Professionals is a comprehensive guide that explores the ground-breaking applications of virtual reality (VR), augmented reality (AR), and mixed reality (MR) in various industries. This book aims to equip practicing professionals with the knowledge and insights they need to harness the full potential of these immersive technologies in their respective fields. Through this book, the authors aim to explore the experimental breakthroughs and cutting-edge methodologies that have emerged in the realm of VR/AR/MR. The book delves deeper into the profound impact these technologies have had on the design process, computer-aided design, healthcare product development, manufacturing, human-robot collaboration, medical imaging, rehabilitation, and even phobia therapy. In each chapter of this book, we delve into specific topics, uncovering the principles, methodologies, and best practices that professionals can adopt. Examples of these topics range from empowering design processes with virtual reality to revolutionizing computer-aided design, and from exploring AR/VR/MR technologies in healthcare to transforming manufacturing with digital twins and metrology in VR. The book aims to provide practitioners with valuable insights, real-world examples, and practical guidance to navigate the ever-evolving landscape of VR/AR/MR systems.
Download or read book Advanced Metrology written by X. Jane Jiang and published by Academic Press. This book was released on 2020-04-08 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Metrology: Freeform Surfaces provides the perfect guide for engineering designers and manufacturers interested in exploring the benefits of this technology. The inclusion of industrial case studies and examples will help readers to implement these techniques which are being developed across different industries as they offer improvements to the functional performance of products and reduce weight and cost. Includes case studies in every chapter to help readers implement the techniques discussed Provides unique advice from industry on hot subjects, including surface description and data processing Features links to online content, including video, code and software
Download or read book Information Modeling for Interoperable Dimensional Metrology written by Y Zhao and published by Springer Science & Business Media. This book was released on 2011-08-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dimensional metrology is an essential part of modern manufacturing technologies, but the basic theories and measurement methods are no longer sufficient for today's digitized systems. The information exchange between the software components of a dimensional metrology system not only costs a great deal of money, but also causes the entire system to lose data integrity. Information Modeling for Interoperable Dimensional Metrology analyzes interoperability issues in dimensional metrology systems and describes information modeling techniques. It discusses new approaches and data models for solving interoperability problems, as well as introducing process activities, existing and emerging data models, and the key technologies of dimensional metrology systems. Written for researchers in industry and academia, as well as advanced undergraduate and postgraduate students, this book gives both an overview and an in-depth understanding of complete dimensional metrology systems. By covering in detail the theory and main content, techniques, and methods used in dimensional metrology systems, Information Modeling for Interoperable Dimensional Metrology enables readers to solve real-world dimensional measurement problems in modern dimensional metrology practices.
Download or read book WCNN 93 Portland written by and published by Psychology Press. This book was released on 1993 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Eighth International Conference on Quality Control by Artificial Vision written by David Fofi and published by SPIE-International Society for Optical Engineering. This book was released on 2007 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of SPIE present the original research papers presented at SPIE conferences and other high-quality conferences in the broad-ranging fields of optics and photonics. These books provide prompt access to the latest innovations in research and technology in their respective fields. Proceedings of SPIE are among the most cited references in patent literature.
Download or read book Advances in Feature Based Manufacturing written by J.J. Shah and published by Elsevier. This book was released on 2013-10-22 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Well known researchers in all areas related to featured based manufacturing have contributed chapters to this book. Some of the chapters are surveys, while others review a specific technique. All contributions, including those from the editors, were thoroughly refereed. The goal of the book is to provide a comprehensive picture of the present stage of development of Features Technology from the point of view of applications in manufacturing. The book is aimed at several audiences. Firstly, it provides the research community with an overview of the present state-of-the-art features in manufacturing, along with references in the literature. Secondly, the book will be useful as supporting material for a graduate-level course on product modeling and realization. Finally, the book will also be valuable to industrial companies who are assessing the significance of features for their business.
Download or read book Concurrent Design of Products Manufacturing Processes and Systems written by Ben Wang and published by CRC Press. This book was released on 1999-01-27 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods presented involve the use of simulation and modeling tools and virtual workstations in conjunction with a design environment. This allows a diverse group of researchers, manufacturers, and suppliers to work within a comprehensive network of shared knowledge. The design environment consists of engineering workstations and servers and a suite of simulation, quantitative, computational, analytical, qualitative and experimental tools. Such a design environment will allow the effective and efficient integration of complete product design, manufacturing process design, and customer satisfaction predictions. This volume enables the reader to create an integrated concurrent engineering design and analysis infrastructure through the use of virtual workstations and servers; provide remote, instant sharing of engineering data and resources for the development of a product, system, mechanism, part, business and/or process, and develop applications fully compatible with international CAD/CAM/CAE standards for product representation and modeling.
