Download or read book Computationally Intensive Statistics for Intelligent IoT written by Debabrata Samanta and published by Springer Nature. This book was released on 2021-10-02 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers computational statistics, its methodologies and applications for IoT device. It includes the details in the areas of computational arithmetic and its influence on computational statistics, numerical algorithms in statistical application software, basics of computer systems, statistical techniques, linear algebra and its role in optimization techniques, evolution of optimization techniques, optimal utilization of computer resources, and statistical graphics role in data analysis. It also explores computational inferencing and computer model's role in design of experiments, Bayesian analysis, survival analysis and data mining in computational statistics.

Download or read book Computationally Intensive Statistics for Intelligent IoT written by Debabrata Samanta and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers computational statistics, its methodologies and applications for IoT device. It includes the details in the areas of computational arithmetic and its influence on computational statistics, numerical algorithms in statistical application software, basics of computer systems, statistical techniques, linear algebra and its role in optimization techniques, evolution of optimization techniques, optimal utilization of computer resources, and statistical graphics role in data analysis. It also explores computational inferencing and computer model's role in design of experiments, Bayesian analysis, survival analysis and data mining in computational statistics.

Download or read book Printed Antennas written by Praveen Kumar Malik and published by CRC Press. This book was released on 2022-12-15 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection covers different printed microstrip antenna designs,from rectangular to circular, broadband, dual-band, and millimeter-wave microstrip antennas to microstrip arrays. It further presents a new analysis of the rectangular and circular microstrip antenna efficiency and surface wave phenomena. The book Covers the latest advances and applications of microstrip antennas Discusses methods and techniques used for the enhancement of the performance parameters of the microstrip antenna Presents low-power wide area network (LPWAN) proximity-coupled antenna for Internet of Things applications. Highlights a new analysis of rectangular and circular microstrip antenna efficiency and surface wave phenomena. Showcases implantable antennas, H-shaped antennas, and wideband implantable antennas for biomedical applications Printed Antennas discusses the latest advances such as the Internet of Things for antenna applications, device-to-device communication, satellite communication, and wearable textile antenna in the field of communication. It further presents methods and techniques used for the enhancement of the performance parameters of the microstrip antenna and covers the design of conformal and miniaturized antenna structures for various applications. It will serve as an ideal reference text for senior undergraduates, graduate students, and researchers in fields including electrical engineering, electronics and communications engineering, and computer engineering.

Download or read book Computational Statistical Methodologies and Modeling for Artificial Intelligence written by Priyanka Harjule and published by CRC Press. This book was released on 2023-03-31 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers computational statistics-based approaches for Artificial Intelligence. The aim of this book is to provide comprehensive coverage of the fundamentals through the applications of the different kinds of mathematical modelling and statistical techniques and describing their applications in different Artificial Intelligence systems. The primary users of this book will include researchers, academicians, postgraduate students, and specialists in the areas of data science, mathematical modelling, and Artificial Intelligence. It will also serve as a valuable resource for many others in the fields of electrical, computer, and optical engineering. The key features of this book are: Presents development of several real-world problem applications and experimental research in the field of computational statistics and mathematical modelling for Artificial Intelligence Examines the evolution of fundamental research into industrialized research and the transformation of applied investigation into real-time applications Examines the applications involving analytical and statistical solutions, and provides foundational and advanced concepts for beginners and industry professionals Provides a dynamic perspective to the concept of computational statistics for analysis of data and applications in intelligent systems with an objective of ensuring sustainability issues for ease of different stakeholders in various fields Integrates recent methodologies and challenges by employing mathematical modeling and statistical techniques for Artificial Intelligence

Download or read book Big Data Analytics for Cloud IoT and Cognitive Computing written by Kai Hwang and published by John Wiley & Sons. This book was released on 2017-08-14 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to successfully integrating social, mobile, Big-Data analytics, cloud and IoT principles and technologies The main goal of this book is to spur the development of effective big-data computing operations on smart clouds that are fully supported by IoT sensing, machine learning and analytics systems. To that end, the authors draw upon their original research and proven track record in the field to describe a practical approach integrating big-data theories, cloud design principles, Internet of Things (IoT) sensing, machine learning, data analytics and Hadoop and Spark programming. Part 1 focuses on data science, the roles of clouds and IoT devices and frameworks for big-data computing. Big data analytics and cognitive machine learning, as well as cloud architecture, IoT and cognitive systems are explored, and mobile cloud-IoT-interaction frameworks are illustrated with concrete system design examples. Part 2 is devoted to the principles of and algorithms for machine learning, data analytics and deep learning in big data applications. Part 3 concentrates on cloud programming software libraries from MapReduce to Hadoop, Spark and TensorFlow and describes business, educational, healthcare and social media applications for those tools. The first book describing a practical approach to integrating social, mobile, analytics, cloud and IoT (SMACT) principles and technologies Covers theory and computing techniques and technologies, making it suitable for use in both computer science and electrical engineering programs Offers an extremely well-informed vision of future intelligent and cognitive computing environments integrating SMACT technologies Fully illustrated throughout with examples, figures and approximately 150 problems to support and reinforce learning Features a companion website with an instructor manual and PowerPoint slides www.wiley.com/go/hwangIOT Big-Data Analytics for Cloud, IoT and Cognitive Computing satisfies the demand among university faculty and students for cutting-edge information on emerging intelligent and cognitive computing systems and technologies. Professionals working in data science, cloud computing and IoT applications will also find this book to be an extremely useful working resource.

Download or read book Shaping the Future of IoT with Edge Intelligence written by Rute C. Sofia and published by CRC Press. This book was released on 2024-01-08 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the technologies that empower edge intelligence, along with their use in novel IoT solutions. Specifically, it presents how 5G/6G, Edge AI, and Blockchain solutions enable novel IoT-based decentralized intelligence use cases at the edge of the cloud/edge/IoT continuum. Emphasis is placed on presenting how these technologies support a wide array of functional and non-functional requirements spanning latency, performance, cybersecurity, data protection, real-time performance, energy efficiency, and more. The various chapters of the book are contributed by several EU-funded projects, which have recently developed novel IoT platforms that enable the development and deployment of edge intelligence applications based on the cloud/edge paradigm. Each one of the projects employs its own approach and uses a different mix of networking, middleware, and IoT technologies. Therefore, each of the chapters of the book contributes a unique perspective on the capabilities of enabling technologies and their integration in practical real-life applications in different sectors. The book is structured in five distinct parts. Each one of the first four parts focuses on a specific set of enabling technologies for edge intelligence and smart IoT applications in the cloud/edge/IoT continuum. Furthermore, the fifth part provides information about complementary aspects of next-generation IoT technology, including information about business models and IoT skills. Specifically: The first part focuses on 5G/6G networking technologies and their roles in implementing edge intelligence applications. The second part presents IoT applications that employ machine learning and other forms of Artificial Intelligence at the edge of the network. The third part illustrates decentralized IoT applications based on distributed ledger technologies. The fourth part is devoted to the presentation of novel IoT applications and use cases spanning the cloud/edge/IoT continuum. The fifth part discusses complementary aspects of IoT technologies, including business models and digital skills.

Download or read book Intersections of Law and Computational Intelligence in Health Governance written by Vig, Komal and published by IGI Global. This book was released on 2024-08-23 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent technologies have vastly improved the efficiency of healthcare industries and intersections of law and governance. Computational intelligence provides effective tools for data management, contract analysis, legal research, and algorithm development. However, with the integration of computational intelligence in health governance, considerable legal concerns beg further exploration. Intersections of Law and Computational Intelligence in Health Governance examines computational intelligence related to healthcare and governance approaches. It addresses issues of healthcare data analysis and storage by presenting solutions using medical computational intelligence techniques. This book covers topics such as healthcare accessibility, medical law, deep learning, and drug discovery and classification, and is a valuable resource for lawyers, policy makers, healthcare workers, medical professionals, academicians, and researchers.

Download or read book Heterogenous Computational Intelligence in Internet of Things written by Pawan Singh and published by CRC Press. This book was released on 2023-10-26 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: We have seen a sharp increase in the development of data transfer techniques in the networking industry over the past few years. We can see that the photos are assisting clinicians in detecting infection in patients even in the current COVID-19 pandemic condition. With the aid of ML/AI, medical imaging, such as lung X-rays for COVID-19 infection, is crucial in the early detection of many diseases. We also learned that in the COVID-19 scenario, both wired and wireless networking are improved for data transfer but have network congestion. An intriguing concept that has the ability to reduce spectrum congestion and continuously offer new network services is providing wireless network virtualization. The degree of virtualization and resource sharing varies between the paradigms. Each paradigm has both technical and non-technical issues that need to be handled before wireless virtualization becomes a common technology. For wireless network virtualization to be successful, these issues need careful design and evaluation. Future wireless network architecture must adhere to a number of Quality of Service (QoS) requirements. Virtualization has been extended to wireless networks as well as conventional ones. By enabling multi-tenancy and tailored services with a wider range of carrier frequencies, it improves efficiency and utilization. In the IoT environment, wireless users are heterogeneous, and the network state is dynamic, making network control problems extremely difficult to solve as dimensionality and computational complexity keep rising quickly. Deep Reinforcement Learning (DRL) has been developed by the use of Deep Neural Networks (DNNs) as a potential approach to solve high-dimensional and continuous control issues effectively. Deep Reinforcement Learning techniques provide great potential in IoT, edge and SDN scenarios and are used in heterogeneous networks for IoT-based management on the QoS required by each Software Defined Network (SDN) service. While DRL has shown great potential to solve emerging problems in complex wireless network virtualization, there are still domain-specific challenges that require further study, including the design of adequate DNN architectures with 5G network optimization issues, resource discovery and allocation, developing intelligent mechanisms that allow the automated and dynamic management of the virtual communications established in the SDNs which is considered as research perspective.

Download or read book Computational Intelligence for Medical Internet of Things MIoT Applications written by Yassine Maleh and published by Elsevier. This book was released on 2023-01-25 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Intelligence for Medical Internet of Things (MIoT) Applications: Machine Intelligence Applications for IoT in Healthcare explores machine intelligence techniques necessary for effective MIoT research and practice, taking a practical approach for practitioners and students entering the field. This book investigates advanced concepts and applications in the MIoT field, guiding readers through emerging developments and future trends. A wide range of international authors guide readers through advanced concepts, including deep learning, neural network, and big data analytic approaches for the classification, indexing, retrieval, analysis, and inferencing of healthcare data. - Presents the state-of-the-art in machine intelligence and related technologies and methodologies for IoT in healthcare - Discusses emerging developments and trends in machine intelligence for business and decision-making strategy in healthcare - Features new models, practical solutions, prototypes, frameworks and technological advances related to machine intelligence for MIoT applications

Download or read book Innovative Computing and Communications written by Aboul Ella Hassanien and published by Springer Nature. This book was released on with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microbial Data Intelligence and Computational Techniques for Sustainable Computing written by Aditya Khamparia and published by Springer Nature. This book was released on with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Enterprise Digital Transformation written by Peter Augustine and published by CRC Press. This book was released on 2022-02-17 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital transformation (DT) has become a buzzword. Every industry segment across the globe is consciously jumping toward digital innovation and disruption to get ahead of their competitors. In other words, every aspect of running a business is being digitally empowered to reap all the benefits of the digital paradigm. All kinds of digitally enabled businesses across the globe are intrinsically capable of achieving bigger and better things for their constituents. Their consumers, clients, and customers will realize immense benefits with real digital transformation initiatives and implementations. The much-awaited business transformation can be easily and elegantly accomplished with a workable and winnable digital transformation strategy, plan, and execution. There are several enablers and accelerators for realizing the much-discussed digital transformation. There are a lot of digitization and digitalization technologies available to streamline and speed up the process of the required transformation. Industrial Internet of Things (IIoT) technologies in close association with decisive advancements in the artificial intelligence (AI) space can bring forth the desired transitions. The other prominent and dominant technologies toward forming digital organizations include cloud IT, edge/fog computing, real-time data analytics platforms, blockchain technology, digital twin paradigm, virtual and augmented reality (VR/AR) techniques, enterprise mobility, and 5G communication. These technological innovations are intrinsically competent and versatile enough to fulfill the varying requirements for establishing and sustaining digital enterprises. Enterprise Digital Transformation: Technology, Tools, and Use Cases features chapters on the evolving aspects of digital transformation and intelligence. It covers the unique competencies of digitally transformed enterprises, IIoT use cases, and applications. It explains promising technological solutions widely associated with digital innovation and disruption. The book focuses on setting up and sustaining smart factories that are fulfilling the Industry 4.0 vision that is realized through the IIoT and allied technologies.

Download or read book Proceedings of International Conference on Computational Intelligence and Data Engineering written by Nabendu Chaki and published by Springer. This book was released on 2019-04-16 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents high-quality research work on cutting-edge technologies and the most-happening areas of computational intelligence and data engineering. It includes selected papers from the International Conference on Computational Intelligence and Data Engineering (ICCIDE 2018). The conference was conceived as a forum for researchers from academia and industry to present and share ideas and results and allow them to develop a comprehensive understanding of the challenges of technological advancements from different viewpoints. As such, this book helps foster strong links between academia and industry. It covers various topics, including collective intelligence, intelligent transportation systems, fuzzy systems, Bayesian network, ant colony optimization, data privacy and security, data mining, data warehousing, big data analytics, cloud computing, natural language processing, swarm intelligence, and speech processing.

Download or read book Machine Learning and Big Data Analytics written by Rajiv Misra and published by Springer Nature. This book was released on 2023-06-06 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume on machine learning and big data analytics (Proceedings of ICMLBDA 2022) is intended to be used as a reference book for researchers and professionals to share their research and reports of new technologies and applications in Machine Learning and Big Data Analytics like biometric Recognition Systems, medical diagnosis, industries, telecommunications, AI Petri Nets Model-Based Diagnosis, gaming, stock trading, Intelligent Aerospace Systems, robot control, law, remote sensing and scientific discovery agents and multiagent systems; and natural language and Web intelligence. The intent of this book is to provide awareness of algorithms used for machine learning and big data in the advanced Scientific Technologies, provide a correlation of multidisciplinary areas and become a point of great interest for Data Scientists, systems architects, developers, new researchers and graduate level students. This volume provides cutting-edge research from around the globe on this field. Current status, trends, future directions, opportunities, etc. are discussed, making it friendly for beginners and young researchers.

Download or read book Computational Intelligence for Modern Business Systems written by Sandeep Kautish and published by Springer Nature. This book was released on 2023-12-05 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the applications of computational intelligence techniques in business systems and advocates how these techniques are useful in modern business operations. The book redefines the computational intelligence foundations, the three pillars - neural networks, evolutionary computation, and fuzzy systems. It also discusses emerging areas such as swarm intelligence, artificial immune systems (AIS), support vector machines, rough sets, and chaotic systems. The other areas have also been demystified in the book to strengthen the range of computational intelligence techniques such as expert systems, knowledge-based systems, and genetic algorithms. Therefore, this book will redefine the role of computational intelligence techniques in modern business system operations such as marketing, finance & accounts, operations, personnel management, supply chain management, and logistics. Besides, this book guides the readers through using them to model, discover, and interpret new patterns that cannot be found through statistical methods alone in various business system operations. This book reveals how computational intelligence can inform the design and integration of services, architecture, brand identity, and product portfolio across the entire enterprise. The book will provide insights into research gaps, open challenges, and unsolved computational intelligence problems. The book will act as a premier reference and instant material for all the users who are contributing/practicing the adaptation of computational intelligence modern techniques in business systems.

Download or read book Computational Statistics and Mathematical Modeling Methods in Intelligent Systems written by Radek Silhavy and published by Springer Nature. This book was released on 2019-09-19 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents real-world problems and exploratory research in computational statistics, mathematical modeling, artificial intelligence and software engineering in the context of the intelligent systems. This book constitutes the refereed proceedings of the 3rd Computational Methods in Systems and Software 2019 (CoMeSySo 2019), a groundbreaking online conference that provides an international forum for discussing the latest high-quality research results.

Download or read book Next Gen Technologies in Computational Intelligence written by R. Anandan and published by CRC Press. This book was released on 2024-06-07 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Proceeding includes the research contribution from the International Conference on Next-Gen Technologies in Computational Intelligence (NGTCA 2023) held on March 24th 2023 at Vels Institute of Science, Technology and Advanced Studies. NGCTA 2023 is the flagship conference of the Computer Society of India (Region 7). Computer Society of India (CSI) is the largest association of IT professionals in India. CSI is a non-profit organization established in 1965 and its members are committed to the advancement of theory and practice of Computer Engineering and Technology Systems. The Mission of CSI is to facilitate research, knowledge sharing, learning, and career enhancement for all categories of IT professionals, while simultaneously inspiring and nurturing new entrants into the industry and helping them to integrate into the IT community. At present, CSI has 76chapters across India, over 550 student branches with 1,00,000 plus members. It serves its members through technical events, seminars, workshops, conferences, publications & journals, research projects, competitions, special interest groups, awards & recognitions, etc. Various CSI chapters conduct Research Convention every year.