Download or read book Computational Wind Engineering 2 written by R.N. Meroney and published by . This book was released on 1997-12-18 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Contains 80-plus selected--and reviewed--papers from the August 1996 symposium, held to examine the accomplishments and challenges posed by the rapid development of computational fluid dynamics as applied to the discipline of wind engineering. Summaries of the discussions, questions, and author responses are also included. Subjects addressed include aerodynamics of bluff bodies, bridges, vehicles, terrain, and buildings; structural response; air pollution; lab methodology and validation; and new computational schemes. An appendix lists abstracts of papers presented but not published. Keynote presentations cover current status and future trends in computational wind engineering (CWE); large eddy simulation of flow past a cubic obstacle; use of meteorological models in CWE; and past achievements and future challenges in CWE. Annotation copyrighted by Book News, Inc., Portland, OR."--
Download or read book Computational Wind Engineering 1 written by S. Murakami and published by Elsevier. This book was released on 2014-06-28 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this volume is to explore the challenges posed by the rapid development of Computational Fluid Dynamics (CFD) within the field of engineering. CFD is already essential to research concerned with fluid flow in civil engineering, and its further potential for application in wind engineering is highly promising. State-of-the-art papers from all over the world are contained here, illuminating the present parameters of the field, as well as suggesting fruitful areas for further research. Eleven papers have been contributed by invited speakers outstanding in the fields of CFD and wind engineering. This volume will serve as a vehicle to promote further development in computational wind engineering.
Download or read book Innovations in Mechanical Engineering II written by José Machado and published by Springer Nature. This book was released on 2022-06-17 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics in the field of mechanical engineering, with a special focus on methods and technologies for modeling, simulation, and design of mechanical systems. Based on a set of papers presented at the 2nd International Conference “Innovation in Engineering”, ICIE, held in Minho, Portugal, on June 28–30, 2022, it focuses on innovation in mechanical engineering, spanning from advanced materials and composites, optimization of manufacturing and production processes, and converging issues and technologies in additive manufacturing and industry 4.0. It covers applications in the transport and automotive, and medical and education sector, among others. This book, which belongs to a three-volume set, provides engineering researchers and professionals with extensive and timely information on new technologies and developments in the field of mechanical engineering and materials.
Download or read book Environmental Wind Engineering and Design of Wind Energy Structures written by Charalambos Baniotopoulos and published by Springer Science & Business Media. This book was released on 2011-12-01 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a state-of-the-art in environmental aerodynamics and the structural design of wind energy support structures, particularly from a modern computational perspective. Examples include real-life applications dealing with pollutant dispersion in the building environment, pedestrian-level winds, comfort levels, relevant legislation and remedial measures. Design methodologies for wind energy structures include reliability assessment and code frameworks.
Download or read book Fifth european african conference on wind engineering written by Claudio Borri and published by Firenze University Press. This book was released on 2009 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 5th European-African Conference of Wind Engineering is hosted in Florence, Tuscany, the city and the region where, in the early 15th century, pioneers moved the first steps, laying down the foundation stones of Mechanics and Applied Sciences (including fluid mechanics). These origins are well reflected by the astonishing visionary and revolutionary studies of Leonardo Da Vinci, whose kaleidoscopic genius intended the human being to become able to fly even 500 years ago... This is why the Organising Committee has decided to pay tribute to such a Genius by choosing Leonardo's "flying sphere" as the brand of 5th EACWE.
Download or read book Handbook of Wind Energy Aerodynamics written by Bernhard Stoevesandt and published by Springer Nature. This book was released on 2022-08-04 with total page 1495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides both a comprehensive overview and deep insights on the state-of-the-art methods used in wind turbine aerodynamics, as well as their advantages and limits. The focus of this work is specifically on wind turbines, where the aerodynamics are different from that of other fields due to the turbulent wind fields they face and the resultant differences in structural requirements. It gives a complete picture of research in the field, taking into account the different approaches which are applied. This book would be useful to professionals, academics, researchers and students working in the field.
Download or read book Urban Aerodynamics written by American Society of Civil Engineers. Task Committee on Urban Aerodynamics and published by Amer Society of Civil Engineers. This book was released on 2011 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report introduces the basic tools and technology used by engineers to determine the effects of wind on city streets and structures.
Download or read book Computational Wind Engineering written by and published by . This book was released on 19?? with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Fluid Dynamics for Wind Engineering written by R. Panneer Selvam and published by John Wiley & Sons. This book was released on 2022-07-29 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: COMPUTATIONAL FLUID DYNAMICS FOR WIND ENGINEERING An intuitive and comprehensive exploration of computational fluid dynamics in the study of wind engineering Computational Fluid Dynamics for Wind Engineering provides readers with a detailed overview of the use of computational fluid dynamics (CFD) in understanding wind loading on structures, a problem becoming more pronounced as urban density increases and buildings become larger. The work emphasizes the application of CFD to practical problems in wind loading and helps readers understand important associated factors such as turbulent flow around buildings and bridges. The author, with extensive research experience in this and related fields, offers relevant and engaging practice material to help readers learn and retain the concepts discussed, and each chapter includes accessible summaries at the end. In addition, the use of the OpenFOAM tool—an open-source wind engineering application—is explored. Computational Fluid Dynamics for Wind Engineering covers topics such as: Fluid mechanics, turbulence in fluid mechanics, turbulence modelling, and mathematical modelling of wind engineering problems The finite difference method for CFD, solutions to the incompressible Navier-Stokes equations, visualization, and animation in CFD, and the application of CFD to building and bridge aerodynamics How to compare CFD analysis with wind tunnel measurements, field measurements, and the ASCE-7 pressure coefficients Wind effects and strain on large structures Providing comprehensive coverage of how CFD can explain wind load on structures along with helpful examples of practical applications, Computational Fluid Dynamics for Wind Engineering serves as an invaluable resource for senior undergraduate students, graduate students, researchers and practitioners of civil and structural engineering.
Download or read book Fluid Structure Interaction II written by Hans-Joachim Bungartz and published by Springer Science & Business Media. This book was released on 2010-09-28 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid-structure interactions (FSI), i.e., the interplay of some moveable or deformable structure with an internal or surrounding fluid, are among the most widespread and most challenging coupled or multi-physics problems. Although much has been accomplished in developing good computational FSI methods and despite convincing solutions to a number of classes of problems including those presented in this book, there is a need for more comprehensive studies showing that the computational methods proposed are reliable, robust, and efficient beyond the classes of problems they have successfully been applied to.This volume of LNCSE, a sequel to vol. 53, which contained, among others, the first numerical benchmark for FSI problems and has received considerable attention since then, presents a collection of papers from the "First International Workshop on Computational Engineering - special focus FSI," held in Herrsching in October 2009 and organized by three DFG-funded consortia. The papers address all relevant aspects of FSI simulation and discuss FSI from the mathematical, informatical, and engineering perspective.
Download or read book Wind Effects on Structures written by Emil Simiu and published by John Wiley & Sons. This book was released on 2019-01-10 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides structural engineers with the knowledge and practical tools needed to perform structural designs for wind that incorporate major technological, conceptual, analytical and computational advances achieved in the last two decades. With clear explanations and documentation of the concepts, methods, algorithms, and software available for accounting for wind loads in structural design, it also describes the wind engineer's contributions in sufficient detail that they can be effectively scrutinized by the structural engineer in charge of the design. Wind Effects on Structures: Modern Structural Design for Wind, 4th Edition is organized in four sections. The first covers atmospheric flows, extreme wind speeds, and bluff body aerodynamics. The second examines the design of buildings, and includes chapters on aerodynamic loads; dynamic and effective wind-induced loads; wind effects with specified MRIs; low-rise buildings; tall buildings; and more. The third part is devoted to aeroelastic effects, and covers both fundamentals and applications. The last part considers other structures and special topics such as trussed frameworks; offshore structures; and tornado effects. Offering readers the knowledge and practical tools needed to develop structural designs for wind loadings, this book: Points out significant limitations in the design of buildings based on such techniques as the high-frequency force balance Discusses powerful algorithms, tools, and software needed for the effective design for wind, and provides numerous examples of application Discusses techniques applicable to structures other than buildings, including stacks and suspended-span bridges Features several appendices on Elements of Probability and Statistics; Peaks-over-Threshold Poisson-Process Procedure for Estimating Peaks; estimates of the WTC Towers’ Response to Wind and their shortcomings; and more Wind Effects on Structures: Modern Structural Design for Wind, 4th Edition is an excellent text for structural engineers, wind engineers, and structural engineering students and faculty.
Download or read book The Oxford Handbook of Non Synoptic Wind Storms written by Horia Hangan and published by Oxford University Press. This book was released on 2021-08-16 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: In different areas of the world, much of the damage due to wind is caused by non-synoptic, local wind storm events, such as tornadoes and downbursts. In North America the damage due to these winds is more than 65% of total wind damage, and there are no guidelines or code implementations to deal with such catastrophic events. As we enter the third decade of the twenty-first century, current research is in its first phase of addressing these types of events, from their characterization, simulation, and loading, to collapse-mode effects on buildings and structures, as well as socioeconomic implications. The need is clear to better understand non-synoptic local winds; properly simulate them; assess the difference in loading between these events and synoptic large-scale winds that have been part of the wind engineering practice for more than five decades; determine their statistics and associated risks; and apply this through guidelines, codes, risk mitigation, and adaptation responses to socioeconomic impact. The Oxford Handbook of Non-Synoptic Wind Storms, led by Dr. Horia Hangan and Dr. Ahsan Kareem, features nearly 30 chapters, contributed by an international panel of leading scientists, scholars, and engineers, that address these issues and stimulate thought, research, and responses to non-synoptic wind storm hazards in North America and worldwide. Together, these articles provide clear definitions of the problems to be tackled, offer a strategic framework for forward-looking research, identify the best-suited tools and methodologies to address the problems at hand, and suggest ways to maximize collaborative planning between the disciplines that will tackle these challenges.
Download or read book Wind Science and Engineering written by Giovanni Solari and published by Springer. This book was released on 2019-07-12 with total page 949 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an essential overview of wind science and engineering, taking readers on a journey through the origins, developments, fundamentals, recent advancements and latest trends in this broad field. Along the way, it addresses a diverse range of topics, including: atmospheric physics; meteorology; micrometeorology; climatology; the aerodynamics of buildings, aircraft, sailing boats, road vehicles and trains; wind energy; atmospheric pollution; soil erosion; snow drift, windbreaks and crops; bioclimatic city-planning and architecture; wind actions and effects on structures; and wind hazards, vulnerability and risk. In order to provide a comprehensive overview of wind and its manifold effects, the book combines scientific, descriptive and narrative chapters. The book is chiefly intended for students and lecturers, for those who want to learn about the genesis and evolution of this topic, and for the multitude of scholars whose work involves the wind.
Download or read book Progress in Turbulence and Wind Energy IV written by Martin Oberlack and published by Springer Science & Business Media. This book was released on 2012-04-24 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fourth issue on "progress in turbulence" is based on the fourth ITI conference (ITI interdisciplinary turbulence initiative), which took place in Bertinoro, North Italy. Leading researchers from the engineering and physical sciences presented latest results in turbulence research. Basic as well as applied research is driven by the rather notorious difficult and essentially unsolved problem of turbulence. In this collection of contributions clear progress can be seen in different aspects, ranging from new quality of numerical simulations to new concepts of experimental investigations and new theoretical developments. The importance of turbulence is shown for a wide range of applications including: combustion, energy, flow control, urban flows, are few examples found in this volume. A motivation was to bring fundamentals of turbulence in connection with renewable energy. This lead us to add a special topic relevant to the impact of turbulence on the wind energy conversion. The structure of the present book is as such that contributions have been bundled according to covering topics i.e. I Basic Turbulence Aspects, II Particle Laden Flows, III Modeling and Simulations, IV, Experimental Methods, V Special Flows, VI Atmospheric Boundary Layer, VII Boundary Layer, VIII Wind Energy and IX Convection. This book is dedicated to the memory of Prof. Tim Nickels. Shortly after giving an invited lecture at the 4th ITI conference, the turbulence community lost a world-class scientist, a friend and devoted family man.
Download or read book Handbook of Fire and the Environment written by Brian J. Meacham and published by Springer Nature. This book was released on 2022-07-28 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fundamental purpose of this handbook is to raise awareness about environmental impacts of fire and fire suppression, primarily within the fire engineering and firefighting communities, but also within the environmental engineering and planning disciplines. The Handbook provides readers with a fundamental understanding of the problem and its magnitude and includes a set of tools and methods for assessing environmental, social and financial impacts, and a set of tools for identifying and selecting appropriate mitigation options.
Download or read book Physical Climatology For Solar And Wind Energy written by Rodolfo Guzzi and published by World Scientific. This book was released on 1988-03-01 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: The basic idea of the Course is to give a wide outline of the methodologies, the instruments and the models used for Solar and Wind Applications.The subjects to be discussed in the lectures are: Solar and Terrestrial Radiation; Wind Energy and Its Application; Instrumental Sets and Methodologies of Measurements; Climatological Applications from Space and Airborne Platform; Data Analysis and Management; Applications.
Download or read book The Aerodynamics of Heavy Vehicles II Trucks Buses and Trains written by Fred Browand and published by Springer Science & Business Media. This book was released on 2008-09-30 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is our pleasure to present these proceedings for “The Aerodynamics of Heavy Vehicles II: Trucks, Buses and Trains” International Conference held in Lake - hoe, California, August 26-31, 2007 by Engineering Conferences International (ECI). Brought together were the world’s leading scientists and engineers from industry, universities, and research laboratories, including truck and high-speed train manufacturers and operators. All were gathered to discuss computer simu- tion and experimental techniques to be applied for the design of the more efficient trucks, buses and high-speed trains required in future years. This was the second conference in the series. The focus of the first conference in 2002 was the interplay between computations and experiment in minimizing ae- dynamic drag. The present proceedings, from the 2007 conference, address the development and application of advanced aerodynamic simulation and experim- tal methods for state-of-the-art analysis and design, as well as the development of new ideas and trends holding promise for the coming 10-year time span. Also - cluded, are studies of heavy vehicle aerodynamic tractor and trailer add-on - vices, studies of schemes to delay undesirable flow separation, and studies of - derhood thermal management.
