Download or read book Computational Viscoelasticity written by Severino P. C. Marques and published by Springer Science & Business Media. This book was released on 2012-01-03 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a guide how to solve problems in which viscoelasticity is present using existing commercial computational codes. The book gives information on codes’ structure and use, data preparation and output interpretation and verification. The first part of the book introduces the reader to the subject, and to provide the models, equations and notation to be used in the computational applications. The second part shows the most important Computational techniques: Finite elements formulation, Boundary elements formulation, and presents the solutions of Viscoelastic problems with Abaqus.
Download or read book Fluid Mechanics of Viscoelasticity written by R.R. Huilgol and published by Elsevier. This book was released on 1997-06-02 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: The areas of suspension mechanics, stability and computational rheology have exploded in scope and substance in the last decade. The present book is one of the first of a comprehensive nature to treat these topics in detail. The aim of the authors has been to highlight the major discoveries and to present a number of them in sufficient breadth and depth so that the novice can learn from the examples chosen, and the expert can use them as a reference when necessary. The first two chapters, grouped under the category General Principles, deal with the kinematics of continuous media and the balance laws of mechanics, including the existence of the stress tensor and extensions of the laws of vector analysis to domains bounded by fractal curves or surfaces. The third and fourth chapters, under the heading Constitutive Modelling, present the tools necessary to formulate constitutive equations from the continuum or the microstructural approach. The last three chapters, under the caption Analytical and Numerical Techniques, contain most of the important results in the domain of the fluid mechanics of viscoelasticity, and form the core of the book. A number of topics of interest have not yet been developed to a theoretical level from which applications can be made in a routine manner. However, the authors have included these topics to make the reader aware of the state of affairs so that research into these matters can be carried out. For example, the sections which deal with domains bounded by fractal curves or surfaces show that the existence of a stress tensor in such regions is still open to question. Similarly, the constitutive modelling of suspensions, especially at high volume concentrations, with the corresponding particle migration from high to low shear regions is still very sketchy.
Download or read book Engineering Viscoelasticity written by Danton Gutierrez-Lemini and published by Springer Science & Business Media. This book was released on 2013-09-12 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Viscoelasticity covers all aspects of the thermo- mechanical response of viscoelastic substances that a practitioner in the field of viscoelasticity would need to design experiments, interpret test data, develop stress-strain models, perform stress analyses, design structural components, and carry out research work. The material in each chapter is developed from the elementary to the esoteric, providing the background in mathematics and mechanics that are central to understanding the subject matter being presented. This book also examines how viscoelastic materials respond to the application of loads, and provides practical guidelines to use them in the design of commercial, military and industrial applications.
Download or read book Computational Inelasticity written by J.C. Simo and published by Springer Science & Business Media. This book was released on 2006-05-07 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: A description of the theoretical foundations of inelasticity, its numerical formulation and implementation, constituting a representative sample of state-of-the-art methodology currently used in inelastic calculations. Among the numerous topics covered are small deformation plasticity and viscoplasticity, convex optimisation theory, integration algorithms for the constitutive equation of plasticity and viscoplasticity, the variational setting of boundary value problems and discretization by finite element methods. Also addressed are the generalisation of the theory to non-smooth yield surface, mathematical numerical analysis issues of general return mapping algorithms, the generalisation to finite-strain inelasticity theory, objective integration algorithms for rate constitutive equations, the theory of hyperelastic-based plasticity models and small and large deformation viscoelasticity. Of great interest to researchers and graduate students in various branches of engineering, especially civil, aeronautical and mechanical, and applied mathematics.
Download or read book A Computational Study of the Effects of Viscoelasticity on the Interfacial Dynamics of Free Surface Displacement Flows written by Gandharv Bhatara and published by . This book was released on 2004 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Fluid and Solid Mechanics 2003 written by K.J Bathe and published by Elsevier. This book was released on 2003-06-02 with total page 2524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the world's leading researchers and practitioners of computational mechanics, these new volumes meet and build on the eight key challenges for research and development in computational mechanics. Researchers have recently identified eight critical research tasks facing the field of computational mechanics. These tasks have come about because it appears possible to reach a new level of mathematical modelling and numerical solution that will lead to a much deeper understanding of nature and to great improvements in engineering design. The eight tasks are: The automatic solution of mathematical models Effective numerical schemes for fluid flows The development of an effective mesh-free numerical solution method The development of numerical procedures for multiphysics problems The development of numerical procedures for multiscale problems The modelling of uncertainties The analysis of complete life cycles of systems Education - teaching sound engineering and scientific judgement Readers of Computational Fluid and Solid Mechanics 2003 will be able to apply the combined experience of many of the world's leading researchers to their own research needs. Those in academic environments will gain a better insight into the needs and constraints of the industries they are involved with; those in industry will gain a competitive advantage by gaining insight into the cutting edge research being carried out by colleagues in academia. Features Bridges the gap between academic researchers and practitioners in industry Outlines the eight main challenges facing Research and Design in Computational mechanics and offers new insights into the shifting the research agenda Provides a vision of how strong, basic and exciting education at university can be harmonized with life-long learning to obtain maximum value from the new powerful tools of analysis
Download or read book Issues in Computation 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-05-01 with total page 1160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Computation / 2013 Edition is a ScholarlyEditions™ book that delivers timely, authoritative, and comprehensive information about Computing. The editors have built Issues in Computation: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Computing in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Computation / 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Biomechanical Systems Technology written by Cornelius T Leondes and published by World Scientific. This book was released on 2007-12-05 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of rapid developments in computer technology and computational techniques, advances in a wide spectrum of technologies, coupled with cross-disciplinary pursuits between technology and its application to human body processes, the field of biomechanics continues to evolve. Many areas of significant progress include dynamics of musculoskeletal systems, mechanics of hard and soft tissues, mechanics of bone remodeling, mechanics of blood and air flow, flow-prosthesis interfaces, mechanics of impact, dynamics of man-machine interaction, and more. Thus, the great breadth and significance of the field in the international scene require a well integrated set of volumes to provide a complete coverage of the exciting subject of biomechanical systems technology. World-renowned contributors tackle the latest technologies in an in-depth and readable manner.
Download or read book Computational Modeling in Tissue Engineering written by Liesbet Geris and published by Springer Science & Business Media. This book was released on 2012-10-30 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the major challenges in tissue engineering is the translation of biological knowledge on complex cell and tissue behavior into a predictive and robust engineering process. Mastering this complexity is an essential step towards clinical applications of tissue engineering. This volume discusses computational modeling tools that allow studying the biological complexity in a more quantitative way. More specifically, computational tools can help in: (i) quantifying and optimizing the tissue engineering product, e.g. by adapting scaffold design to optimize micro-environmental signals or by adapting selection criteria to improve homogeneity of the selected cell population; (ii) quantifying and optimizing the tissue engineering process, e.g. by adapting bioreactor design to improve quality and quantity of the final product; and (iii) assessing the influence of the in vivo environment on the behavior of the tissue engineering product, e.g. by investigating vascular ingrowth. The book presents examples of each of the above mentioned areas of computational modeling. The underlying tissue engineering applications will vary from blood vessels over trachea to cartilage and bone. For the chapters describing examples of the first two areas, the main focus is on (the optimization of) mechanical signals, mass transport and fluid flow encountered by the cells in scaffolds and bioreactors as well as on the optimization of the cell population itself. In the chapters describing modeling contributions in the third area, the focus will shift towards the biology, the complex interactions between biology and the micro-environmental signals and the ways in which modeling might be able to assist in investigating and mastering this complexity. The chapters cover issues related to (multiscale/multiphysics) model building, training and validation, but also discuss recent advances in scientific computing techniques that are needed to implement these models as well as new tools that can be used to experimentally validate the computational results.
Download or read book Modeling and Design of Flexible Pavements and Materials written by Dallas N. Little and published by Springer. This book was released on 2017-09-25 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook lays out the state of the art for modeling of asphalt concrete as the major structural component of flexible pavements. The text adopts a pedagogy in which a scientific approach, based on materials science and continuum mechanics, predicts the performance of any configuration of flexible roadways subjected to cyclic loadings. The authors incorporate state-of the-art computational mechanics to predict the evolution of material properties, stresses and strains, and roadway deterioration. Designed specifically for both students and practitioners, the book presents fundamentally complex concepts in a clear and concise way that aids the roadway design community to assimilate the tools for designing sustainable roadways using both traditional and innovative technologies.
Download or read book Computational Modeling of Viscoelastic Composite and Porous Materials written by Yun Huang and published by . This book was released on 2006 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1974 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Viscoelasticity Basic Theory and Applications to Concrete Structures written by Guillermo J. Creus and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains notes for a one-semester graduate course which is an introduction to the study of viscoelasticity and creep of concrete. Emphasis was set on the conceptual aspects rather than on the mathematical or computational refinements. The mathematical structure of viscoelasticity is discussed with some care because it clarifies the basic concepts and has important consequences in computa tional applications. Basic ideas are exemplified using the simplest problems and constitutive models in order to be able to show complete solutions. In the computational applications we have also chosen to present the sim plest situations with the greatest possible detail. It has been the author's experience that once the basic concepts are well understood the students are able to follow the rest of the course more easily and to accede to more advanced literature and applications. Chapters I to III furnish the foundations for the course, that may be expanded in diverse ways. If we are interested in finite elements applications we should look at Chapter IV and then go direct ly to Chapter VII. If we are interested in the simplified analysis of frame structures we should study Chapter VI in detail. Chapter V re views the viscoelastic behavior of concrete and Chapter VIII studies the problem of creep buckling. At the end of each chapter we give se lected references to works that complete and extend the subject matter.
Download or read book Computational Rheology written by Robert G Owens and published by World Scientific. This book was released on 2002-05-29 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern day high-performance computers are making available to 21st-century scientists solutions to rheological flow problems of ever-increasing complexity. Computational rheology is a fast-moving subject — problems which only 10 years ago were intractable, such as 3D transient flows of polymeric liquids, non-isothermal non-Newtonian flows or flows of highly elastic liquids through complex geometries, are now being tackled owing to the availability of parallel computers, adaptive methods and advances in constitutive modelling.Computational Rheology traces the development of numerical methods for non-Newtonian flows from the late 1960's to the present day. It begins with broad coverage of non-Newtonian fluids, including their mathematical modelling and analysis, before specific computational techniques are discussed. The application of these techniques to some important rheological flow problems of academic and industrial interest is then treated in a detailed and up-to-date exposition. Finally, the reader is kept abreast of topics at the cutting edge of research in computational applied mathematics, such as adaptivity and stochastic partial differential equations.All the topics in this book are dealt with from an elementary level and this makes the text suitable for advanced undergraduate and graduate students, as well as experienced researchers from both the academic and industrial communities.
Download or read book Parallel Computational Fluid Dynamics 93 written by J. Hauser and published by Elsevier. This book was released on 1995-01-30 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at the Parallel Computing Fluid Dynamics '93 Conference, Paris, 1993. A wide range of topics are covered including: networked computers, data parallel programming, domain decomposition, Euler and Navier-Stokes solvers. Researchers in this area will find this volume a useful reference in this rapidly developing field.
Download or read book Modeling and Computing for Geotechnical Engineering written by M.S. Rahman and published by CRC Press. This book was released on 2018-09-03 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and computing is becoming an essential part of the analysis and design of an engineered system. This is also true of "geotechnical systems", such as soil foundations, earth dams and other soil-structure systems. The general goal of modeling and computing is to predict and understand the behaviour of the system subjected to a variety of possible conditions/scenarios (with respect to both external stimuli and system parameters), which provides the basis for a rational design of the system. The essence of this is to predict the response of the system to a set of external forces. The modelling and computing essentially involve the following three phases: (a) Idealization of the actual physical problem, (b) Formulation of a mathematical model represented by a set of equations governing the response of the system, and (c) Solution of the governing equations (often requiring numerical methods) and graphical representation of the numerical results. This book will introduce these phases. MATLAB® codes and MAPLE® worksheets are available for those who have bought the book. Please contact the author at [email protected] or [email protected]. Kindly provide the invoice number and date of purchase.
Download or read book Wave Propagation in Viscoelastic and Poroelastic Continua written by Martin Schanz and published by Springer Science & Business Media. This book was released on 2012-11-27 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wave propagation is an important topic in engineering sciences, especially, in the field of solid mechanics. A description of wave propagation phenomena is given by Graff [98]: The effect of a sharply applied, localized disturbance in a medium soon transmits or 'spreads' to other parts of the medium. These effects are familiar to everyone, e.g., transmission of sound in air, the spreading of ripples on a pond of water, or the transmission of radio waves. From all wave types in nature, here, attention is focused only on waves in solids. Thus, solely mechanical disturbances in contrast to electro-magnetic or acoustic disturbances are considered. of waves - the compression wave similar to the In solids, there are two types pressure wave in fluids and, additionally, the shear wave. Due to continual reflec tions at boundaries and propagation of waves in bounded solids after some time a steady state is reached. Depending on the influence of the inertia terms, this state is governed by a static or dynamic equilibrium in frequency domain. However, if the rate of onset of the load is high compared to the time needed to reach this steady state, wave propagation phenomena have to be considered.
