Download or read book Computational Technologies for Fluid thermal structural chemical Systems with Industrial Applications written by and published by . This book was released on 2004 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CVD XV written by Mark Donald Allendorf and published by The Electrochemical Society. This book was released on 2000 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Models for Turbulent Reacting Flows written by Rodney O. Fox and published by Cambridge University Press. This book was released on 2003-10-30 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Table of contents
Download or read book Computational Fluid Dynamics in Industrial Combustion written by Charles E. Baukal, Jr. and published by CRC Press. This book was released on 2000-10-26 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although many books have been written on computational fluid dynamics (CFD) and many written on combustion, most contain very limited coverage of the combination of CFD and industrial combustion. Furthermore, most of these books are written at an advanced academic level, emphasize theory over practice, and provide little help to engineers who need to use CFD for combustion modeling. Computational Fluid Dynamics in Industrial Combustion fills this gap in the literature. Focusing on topics of interest to the practicing engineer, it codifies the many relevant books, papers, and reports written on this combined subject into a single, coherent reference. It looks at each topic from a somewhat narrow perspective to see how that topic affects modeling in industrial combustion. The editor and his team of expert authors address these topics within three main sections: Modeling Techniques-The basics of CFD modeling in combustion Industrial Applications-Specific applications of CFD in the steel, aluminum, glass, gas turbine, and petrochemical industries Advanced Techniques-Subjects rarely addressed in other texts, including design optimization, simulation, and visualization Rapid increases in computing power and significant advances in commercial CFD codes have led to a tremendous increase in the application of CFD to industrial combustion. Thorough and clearly representing the techniques and issues confronted in industry, Computational Fluid Dynamics in Industrial Combustion will help bring you quickly up to date on current methods and gain the ability to set up and solve the various types of problems you will encounter.
Download or read book Fracture of Nano and Engineering Materials and Structures written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2008-01-08 with total page 1452 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 16th European Conference of Fracture (ECF16) was held in Greece, July, 2006. It focused on all aspects of structural integrity with the objective of improving the safety and performance of engineering structures, components, systems and their associated materials. Emphasis was given to the failure of nanostructured materials and nanostructures including micro- and nano-electromechanical systems (MEMS and NEMS).
Download or read book Advances in Computational Methods in Sciences and Engineering 2005 2 vols written by Theodore Simos and published by CRC Press. This book was released on 2022-05-04 with total page 1107 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume brings together selected contributed papers presented at the International Conference of Computational Methods in Science and Engineering (ICCMSE 2005), held in Greece, 21 aEURO" 26 October 2005. The conference aims to bring together computational scientists from several disciplines in order to share methods and ideas. The ICCMSE is unique in its kind. It regroups original contributions from all fields of the traditional Sciences, Mathematics, Physics, Chemistry, Biology, Medicine and all branches of Engineering. It would be perhaps more appropriate to define the ICCMSE as a conference on computational science and its applications to science and engineering. Topics of general interest are: Computational Mathematics, Theoretical Physics and Theoretical Chemistry. Computational Engineering and Mechanics, Computational Biology and Medicine, Computational Geosciences and Meteorology, Computational Economics and Finance, Scientific Computation. High Performance Computing, Parallel and Distributed Computing, Visualization, Problem Solving Environments, Numerical Algorithms, Modelling and Simulation of Complex System, Web-based Simulation and Computing, Grid-based Simulation and Computing, Fuzzy Logic, Hybrid Computational Methods, Data Mining, Information Retrieval and Virtual Reality, Reliable Computing, Image Processing, Computational Science and Education etc. More than 800 extended abstracts have been submitted for consideration for presentation in ICCMSE 2005. From these 500 have been selected after international peer review by at least two independent reviewers.
Download or read book Recent Advances in Computational and Experimental Mechanics Vol II written by D. K. Maiti and published by Springer Nature. This book was released on 2022-02-26 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book (Vol. II) presents select proceedings of the first Online International Conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM 2020) and focuses on theoretical, computational and experimental aspects of solid and fluid mechanics. Various topics covered are computational modelling of extreme events; mechanical modelling of robots; mechanics and design of cellular materials; mechanics of soft materials; mechanics of thin-film and multi-layer structures; meshfree and particle based formulations in continuum mechanics; multi-scale computations in solid mechanics, and materials; multiscale mechanics of brittle and ductile materials; topology and shape optimization techniques; acoustics including aero-acoustics and wave propagation; aerodynamics; dynamics and control in micro/nano engineering; dynamic instability and buckling; flow-induced noise and vibration; inverse problems in mechanics and system identification; measurement and analysis techniques in nonlinear dynamic systems; multibody dynamical systems and applications; nonlinear dynamics and control; stochastic mechanics; structural dynamics and earthquake engineering; structural health monitoring and damage assessment; turbomachinery noise; vibrations of continuous systems, characterization of advanced materials; damage identification and non-destructive evaluation; experimental fire mechanics and damage; experimental fluid mechanics; experimental solid mechanics; measurement in extreme environments; modal testing and dynamics; experimental hydraulics; mechanism of scour under steady and unsteady flows; vibration measurement and control; bio-inspired materials; constitutive modelling of materials; fracture mechanics; mechanics of adhesion, tribology and wear; mechanics of composite materials; mechanics of multifunctional materials; multiscale modelling of materials; phase transformations in materials; plasticity and creep in materials; fluid mechanics, computational fluid dynamics; fluid-structure interaction; free surface, moving boundary and pipe flow; hydrodynamics; multiphase flows; propulsion; internal flow physics; turbulence modelling; wave mechanics; flow through porous media; shock-boundary layer interactions; sediment transport; wave-structure interaction; reduced-order models; turbo-machinery; experimental hydraulics; mechanism of scour under steady and unsteady flows; applications of machine learning and artificial intelligence in mechanics; transport phenomena and soft computing tools in fluid mechanics. The contents of these two volumes (Volumes I and II) discusses various attributes of modern-age mechanics in various disciplines, such as aerospace, civil, mechanical, ocean engineering and naval architecture. The book will be a valuable reference for beginners, researchers, and professionals interested in solid and fluid mechanics and allied fields.
Download or read book Proceedings of the ASME JSME Joint Fluids Engineering Conference written by and published by . This book was released on 2003 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Military Textiles and Personal Equipment written by E Sparks and published by Elsevier. This book was released on 2012-07-13 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The right clothing and equipment is of vital importance to the survival and effectiveness of military personnel. Advances in military textiles and personal equipment summarises key research on the design, manufacture and applications of military textiles.Beginning with an overview of design issues, part one explores anthropometric methods, psychological, colour and camouflage issues related to the successful design of military textiles. Materials and design issues in military helmets, footwear and hand wear are also reviewed. Part two goes on to consider applications of particular types of military clothing and equipment, including optimisation of body armour design, high performance ballistic protection using polymer nanocomposite technology as well as advances in materials and modelling of chemical, biological, radiological and nuclear protective clothing. Finally, Advances in military textiles and personal equipment looks specifically at designing load carriage and advanced hydration systems for military personnel.With its distinguished editor and international team of expert contributors, Advances in military textiles and personal equipment is an invaluable resource for all those working in the design, manufacture and production of military clothing and equipment, as well as for the defence industry itself. - Summarises key research on the design, manufacture and applications of military textiles - Begins with an overview of the issues related to the successful design of military textiles and reviews materials and design issues in military helmets, footwear and hand wear - Sections consider applications of particular types of military clothing and equipment, including optimisation of body armour design, and discusses advances in materials and modelling of chemical, biological, radiological and nuclear protective clothing
Download or read book Fischer Tropsch Technology written by André Steynberg and published by Elsevier. This book was released on 2004-10-30 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fischer-Tropsch Technology is a unique book for its state-of-the-art approach to Fischer Tropsch (FT) technology. This book provides an explanation of the basic principles and terminology that are required to understand the application of FT technology. It also contains comprehensive references to patents and previous publications. As the first publication to focus on theory and application, it is a contemporary reference source for students studying chemistry and chemical engineering. Researchers and engineers active in the development of FT technology will also find this book an invaluable source of information. * Is the first publication to cover the theory and application for modern Fischer Tropsch technology * Contains comprehensive knowledge on all aspects relevant to the application of Fischer Tropsch technology* No other publication looks at past, present and future applications
Download or read book Frontiers of Engineering written by National Academy of Engineering and published by National Academies Press. This book was released on 2003-02-11 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection includes summaries of presentations given at the NAE Symposium in September 2002. Topics include chemical and molecular engineering in the 21st century, human factors engineering, the future of nuclear energy, and engineering challenges for quantum information technology.
Download or read book MEMS written by Mohamed Gad-el-Hak and published by CRC Press. This book was released on 2005-11-29 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly revised and updated, the new edition of the best-selling MEMS Handbook is now presented as a three-volume set that offers state-of-the-art coverage of microelectromechanical systems. The first volume, MEMS: Introduction and Fundamentals builds the required background and explores various physical considerations of MEMS. Topics include scaling, simulation models, the basics of control theory, and the physics of materials flow, thin liquid films, and bubble/drop transport. New chapters in this edition address lattice Boltzmann simulations and microscale hydrodynamics. Standing well on its own, this books builds an outstanding foundation for further exploration of MEMS and their applications.
Download or read book Computational Fluid and Solid Mechanics 2003 written by K.J Bathe and published by Elsevier. This book was released on 2003-06-02 with total page 2485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the world's leading researchers and practitioners of computational mechanics, these new volumes meet and build on the eight key challenges for research and development in computational mechanics.Researchers have recently identified eight critical research tasks facing the field of computational mechanics. These tasks have come about because it appears possible to reach a new level of mathematical modelling and numerical solution that will lead to a much deeper understanding of nature and to great improvements in engineering design.The eight tasks are: - The automatic solution of mathematical models - Effective numerical schemes for fluid flows - The development of an effective mesh-free numerical solution method - The development of numerical procedures for multiphysics problems - The development of numerical procedures for multiscale problems - The modelling of uncertainties - The analysis of complete life cycles of systems - Education - teaching sound engineering and scientific judgement Readers of Computational Fluid and Solid Mechanics 2003 will be able to apply the combined experience of many of the world's leading researchers to their own research needs. Those in academic environments will gain a better insight into the needs and constraints of the industries they are involved with; those in industry will gain a competitive advantage by gaining insight into the cutting edge research being carried out by colleagues in academia. Features - Bridges the gap between academic researchers and practitioners in industry - Outlines the eight main challenges facing Research and Design in Computational mechanics and offers new insights into the shifting the research agenda - Provides a vision of how strong, basic and exciting education at university can be harmonized with life-long learning to obtain maximum value from the new powerful tools of analysis
Download or read book Parallel Computational Fluid Dynamics 2000 written by C.B. Jenssen and published by Gulf Professional Publishing. This book was released on 2001-04-27 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel CFD 2000, the Twelfth in an International series of meetings featuring computational fluid dynamics research on parallel computers, was held May 22-25, 2000 in Trondheim, Norway.Following the trend of the past conferences, areas such as numerical schemes and algorithms, tools and environments, load balancing, as well as interdisciplinary topics and various kinds of industrial applications were all well represented in the work presented. In addition, for the first time in the Parallel CFD conference series, the organizing committee chose to draw special attention to certain subject areas by organizing a number of special sessions.We feel the emphasis of the papers presented at the conference reflect the direction of the research within parallel CFD at the beginning of the new millennium. It seems to be a clear tendency towards increased industrial exploitation of parallel CFD. Several presentations also demonstrated how new insight is being achieved from complex simulations, and how powerful parallel computers now make it possible to use CFD within a broader interdisciplinary setting.Obviously, successful application of parallel CFD still rests on the underlying fundamental principles. Therefore, numerical algorithms, development tools, and parallelization techniques are still as important as when parallel CFD was in is infancy. Furthermore, the novel concepts of affordable parallel computing as well as metacomputing show that exciting developments are still taking place.As is often pointed out however, the real power of parallel CFD comes from the combination of all the disciplines involved: Physics, mathematics, and computer science. This is probably one of the principal reasons for the continued popularity of the Parallel CFD Conferences series, as well as the inspiration behind much of the excellent work carried out on the subject. We hope that the papers in this book, both on an individual basis and as a whole, will contribute to that inspiration. Further details of Parallel CFD'99, as well as other conferences in this series, are available at http://www.parcfd.org
Download or read book Chemistry and Physics of Modern Materials written by Jimsher N. Aneli and published by CRC Press. This book was released on 2013-07-29 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from top nanoscientists, this book offers a global perspective on the latest developments in nanotechnology. It covers the major themes of nanoscience and nanotechnology, addressing many of the major issues, from concept to technology to implementation. It is an important reference publication that provides new research and updates on a variety of nanoscience uses through case studies and supporting technologies, and it also explains the conceptual thinking behind current uses and potential uses not yet implemented. International experts with countless years of experience lend this volume credibility.
Download or read book 1D and Multi D Modeling Techniques for IC Engine Simulation written by Angelo Onorati and published by SAE International. This book was released on 2020-04-06 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1D and Multi-D Modeling Techniques for IC Engine Simulation provides a description of the most significant and recent achievements in the field of 1D engine simulation models and coupled 1D-3D modeling techniques, including 0D combustion models, quasi-3D methods and some 3D model applications.
Download or read book Single Crystal Growth of Semiconductors from Metallic Solutions written by Sadik Dost and published by Elsevier. This book was released on 2006-11-17 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Single Crystal Growth of Semiconductors from Metallic Solutions covers the four principal growth techniques currently in use for the growth of semiconductor single crystals from metallic solutions. Providing an in-depth review of the state-of-the-art of each, both experimentally and by numerical simulations. The importance of a close interaction between the numerical and experimental aspects of the processes is also emphasized. Advances in the fields of electronics and opto-electronics are hampered by the limited number of substrate materials which can be readily produced by melt-growth techniques such as the Czochralski and Bridgman methods. This can be alleviated by the use of alternative growth techniques, and in particular, growth from metallic solutions. The principal techniques currently in use are: Liquid Phase Epitaxy; Liquid Phase Electroepitaxy; the Travelling Heater Method, and; Liquid Phase Diffusion. Single Crystal Growth of Semiconductors from Metallic Solutions will serve as a valuable reference tool for researchers, and graduate and senior undergraduate students in the field of crystal growth. It covers most of the models developed in recent years. The detailed development of basic and constitutive equations and the associated interface and boundary conditions given for each technique will be very valuable to researchers for the development of their new models.* Describes the fundamentals of crystal growth modelling* Providing a state-of-the art description of the mathematical and experimental growth processes * Allows reader to gain clear insight into the practical and mathematical aspects of the topic
