Download or read book Computational Nuclear Physics 1 written by K. Langanke and published by Springer Science & Business Media. This book was released on 2013-11-22 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variety of standard problems in theoretical nuclear-structure physics is addressed by the well-documented computer codes presented in this book. Most of these codes were available up to now only through personal contact. The subject matter ranges from microscopic models (the shell, Skyrme-Hartree-Fock, and cranked Nilsson models) through collective excitations (RPA, IBA, and geometric model) to the relativistic impulse approximation, three-body calculations, variational Monte Carlo methods, and electron scattering. The 5 1/4'' high-density floppy disk that comes with the book contains the FORTRAN codes of the problems that are tackled in each of the ten chapters. In the text, the precise theoretical foundations and motivations of each model or method are discussed together with the numerical methods employed. Instructions for the use of each code, and how to adapt them to local compilers and/or operating systems if necessary, are included.
Download or read book Computational Nuclear Physics written by and published by . This book was released on 1991 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Advanced Course in Computational Nuclear Physics written by Morten Hjorth-Jensen and published by Springer. This book was released on 2017-05-09 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate-level text collects and synthesizes a series of ten lectures on the nuclear quantum many-body problem. Starting from our current understanding of the underlying forces, it presents recent advances within the field of lattice quantum chromodynamics before going on to discuss effective field theories, central many-body methods like Monte Carlo methods, coupled cluster theories, the similarity renormalization group approach, Green’s function methods and large-scale diagonalization approaches. Algorithmic and computational advances show particular promise for breakthroughs in predictive power, including proper error estimates, a better understanding of the underlying effective degrees of freedom and of the respective forces at play. Enabled by recent improvements in theoretical, experimental and numerical techniques, the state-of-the art applications considered in this volume span the entire range, from our smallest components – quarks and gluons as the mediators of the strong force – to the computation of the equation of state for neutron star matter. The lectures presented provide an in-depth exposition of the underlying theoretical and algorithmic approaches as well details of the numerical implementation of the methods discussed. Several also include links to numerical software and benchmark calculations, which readers can use to develop their own programs for tackling challenging nuclear many-body problems.
Download or read book Computational nuclear physics written by Karlheinz Langanke and published by . This book was released on 1991 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Nuclear Physics 2 written by K. Langanke and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computation is essential to our modern understanding of nuclear systems. Although simple analytical models might guide our intuition, the complex ity of the nuclear many-body problem and the ever-increasing precision of experimental results require large-scale numerical studies for a quantitative understanding. Despite their importance, many nuclear physics computations remain something of a black art. A practicing nuclear physicist might be familiar with one or another type of computation, but there is no way to systemati cally acquire broad experience. Although computational methods and results are often presented in the literature, it is often difficult to obtain the working codes. More often than not, particular numerical expertise resides in one or a few individuals, who must be contacted informally to generate results; this option becomes unavailable when these individuals leave the field. And while the teaching of modern nuclear physics can benefit enormously from realistic computer simulations, there has been no source for much of the important material. The present volume, the second of two, is an experiment aimed at address ing some of these problems. We have asked recognized experts in various aspects of computational nuclear physics to codify their expertise in indi vidual chapters. Each chapter takes the form of a brief description of the relevant physics (with appropriate references to the literature), followed by a discussion of the numerical methods used and their embodiment in a FOR TRAN code. The chapters also contain sample input and test runs, as well as suggestions for further exploration.
Download or read book Computational Nuclear Physics Nuclear reactions written by K. Langanke and published by . This book was released on 1991 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Computational Science written by Yousry Azmy and published by Springer Science & Business Media. This book was released on 2010-04-15 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear engineering has undergone extensive progress over the years. In the past century, colossal developments have been made and with specific reference to the mathematical theory and computational science underlying this discipline, advances in areas such as high-order discretization methods, Krylov Methods and Iteration Acceleration have steadily grown. Nuclear Computational Science: A Century in Review addresses these topics and many more; topics which hold special ties to the first half of the century, and topics focused around the unique combination of nuclear engineering, computational science and mathematical theory. Comprising eight chapters, Nuclear Computational Science: A Century in Review incorporates a number of carefully selected issues representing a variety of problems, providing the reader with a wealth of information in both a clear and concise manner. The comprehensive nature of the coverage and the stature of the contributing authors combine to make this a unique landmark publication. Targeting the medium to advanced level academic, this book will appeal to researchers and students with an interest in the progression of mathematical theory and its application to nuclear computational science.
Download or read book Computational Nuclear Physics 2 written by K. Langanke and published by . This book was released on 1993-01-01 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Nuclear Physics 2 written by Karlheinz Langanke and published by Springer. This book was released on 1993-04-16 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computation is essential to our modern understanding of nuclear systems. Although simple analytical models might guide our intuition, the complex ity of the nuclear many-body problem and the ever-increasing precision of experimental results require large-scale numerical studies for a quantitative understanding. Despite their importance, many nuclear physics computations remain something of a black art. A practicing nuclear physicist might be familiar with one or another type of computation, but there is no way to systemati cally acquire broad experience. Although computational methods and results are often presented in the literature, it is often difficult to obtain the working codes. More often than not, particular numerical expertise resides in one or a few individuals, who must be contacted informally to generate results; this option becomes unavailable when these individuals leave the field. And while the teaching of modern nuclear physics can benefit enormously from realistic computer simulations, there has been no source for much of the important material. The present volume, the second of two, is an experiment aimed at address ing some of these problems. We have asked recognized experts in various aspects of computational nuclear physics to codify their expertise in indi vidual chapters. Each chapter takes the form of a brief description of the relevant physics (with appropriate references to the literature), followed by a discussion of the numerical methods used and their embodiment in a FOR TRAN code. The chapters also contain sample input and test runs, as well as suggestions for further exploration.
Download or read book Computational Nuclear Engineering and Radiological Science Using Python written by Ryan McClarren and published by Academic Press. This book was released on 2017-10-19 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Nuclear Engineering and Radiological Science Using Python provides the necessary knowledge users need to embed more modern computing techniques into current practices, while also helping practitioners replace Fortran-based implementations with higher level languages. The book is especially unique in the market with its implementation of Python into nuclear engineering methods, seeking to do so by first teaching the basics of Python, then going through different techniques to solve systems of equations, and finally applying that knowledge to solve problems specific to nuclear engineering. Along with examples of code and end-of-chapter problems, the book is an asset to novice programmers in nuclear engineering and radiological sciences, teaching them how to analyze complex systems using modern computational techniques. For decades, the paradigm in engineering education, in particular, nuclear engineering, has been to teach Fortran along with numerical methods for solving engineering problems. This has been slowly changing as new codes have been written utilizing modern languages, such as Python, thus resulting in a greater need for the development of more modern computational skills and techniques in nuclear engineering. - Offers numerical methods as a tool to solve specific problems in nuclear engineering - Provides examples on how to simulate different problems and produce graphs using Python - Supplies accompanying codes and data on a companion website, along with solutions to end-of-chapter problems
Download or read book Computational Many Particle Physics written by Holger Fehske and published by Springer. This book was released on 2007-12-10 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Looking for the real state of play in computational many-particle physics? Look no further. This book presents an overview of state-of-the-art numerical methods for studying interacting classical and quantum many-particle systems. A broad range of techniques and algorithms are covered, and emphasis is placed on their implementation on modern high-performance computers. This excellent book comes complete with online files and updates allowing readers to stay right up to date.
Download or read book Computational Nuclear Physics Nuclear physics written by and published by . This book was released on 1991 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mathematical and Computational Methods in Nuclear Physics written by J.S. Dehesa and published by Springer. This book was released on 2014-03-12 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Computational Physics for Undergraduates written by Omair Zubairi and published by Morgan & Claypool Publishers. This book was released on 2018-04-04 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an introductory textbook on computational methods and techniques intended for undergraduates at the sophomore or junior level in the fields of science, mathematics, and engineering. It provides an introduction to programming languages such as FORTRAN 90/95/2000 and covers numerical techniques such as differentiation, integration, root finding, and data fitting. The textbook also entails the use of the Linux/Unix operating system and other relevant software such as plotting programs, text editors, and mark up languages such as LaTeX. It includes multiple homework assignments.
Download or read book A Survey of Computational Physics written by Rubin Landau and published by Princeton University Press. This book was released on 2011-10-30 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational physics is a rapidly growing subfield of computational science, in large part because computers can solve previously intractable problems or simulate natural processes that do not have analytic solutions. The next step beyond Landau's First Course in Scientific Computing and a follow-up to Landau and Páez's Computational Physics, this text presents a broad survey of key topics in computational physics for advanced undergraduates and beginning graduate students, including new discussions of visualization tools, wavelet analysis, molecular dynamics, and computational fluid dynamics. By treating science, applied mathematics, and computer science together, the book reveals how this knowledge base can be applied to a wider range of real-world problems than computational physics texts normally address. Designed for a one- or two-semester course, A Survey of Computational Physics will also interest anyone who wants a reference on or practical experience in the basics of computational physics. Accessible to advanced undergraduates Real-world problem-solving approach Java codes and applets integrated with text Companion Web site includes videos of lectures
Download or read book Nuclear Physics written by National Research Council and published by National Academies Press. This book was released on 2013-02-25 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principal goals of the study were to articulate the scientific rationale and objectives of the field and then to take a long-term strategic view of U.S. nuclear science in the global context for setting future directions for the field. Nuclear Physics: Exploring the Heart of Matter provides a long-term assessment of an outlook for nuclear physics. The first phase of the report articulates the scientific rationale and objectives of the field, while the second phase provides a global context for the field and its long-term priorities and proposes a framework for progress through 2020 and beyond. In the second phase of the study, also developing a framework for progress through 2020 and beyond, the committee carefully considered the balance between universities and government facilities in terms of research and workforce development and the role of international collaborations in leveraging future investments. Nuclear physics today is a diverse field, encompassing research that spans dimensions from a tiny fraction of the volume of the individual particles (neutrons and protons) in the atomic nucleus to the enormous scales of astrophysical objects in the cosmos. Nuclear Physics: Exploring the Heart of Matter explains the research objectives, which include the desire not only to better understand the nature of matter interacting at the nuclear level, but also to describe the state of the universe that existed at the big bang. This report explains how the universe can now be studied in the most advanced colliding-beam accelerators, where strong forces are the dominant interactions, as well as the nature of neutrinos.
Download or read book Introductory Nuclear Physics written by Samuel S. M. Wong and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive, unified treatment of present-day nuclear physics-the fresh edition of a classic text/reference. "A fine and thoroughly up-to-date textbook on nuclear physics . . . most welcome." -Physics Today (on the First Edition). What sets Introductory Nuclear Physics apart from other books on the subject is its presentation of nuclear physics as an integral part of modern physics. Placing the discipline within a broad historical and scientific context, it makes important connections to other fields such as elementary particle physics and astrophysics. Now fully revised and updated, this Second Edition explores the changing directions in nuclear physics, emphasizing new developments and current research-from superdeformation to quark-gluon plasma. Author Samuel S.M. Wong preserves those areas that established the First Edition as a standard text in university physics departments, focusing on what is exciting about the discipline and providing a concise, thorough, and accessible treatment of the fundamental aspects of nuclear properties. In this new edition, Professor Wong: * Includes a chapter on heavy-ion reactions-from high-spin states to quark-gluon plasma * Adds a new chapter on nuclear astrophysics * Relates observed nuclear properties to the underlying nuclear interaction and the symmetry principles governing subatomic particles * Regroups material and appendices to make the text easier to use * Lists Internet links to essential databases and research projects * Features end-of-chapter exercises using real-world data. Introductory Nuclear Physics, Second Edition is an ideal text for courses in nuclear physics at the senior undergraduate or first-year graduate level. It is also an important resource for scientists and engineers working with nuclei, for astrophysicists and particle physicists, and for anyone wishing to learn more about trends in the field.
