Download or read book Elasto Plastic and Damage Analysis of Plates and Shells written by George Z Voyiadjis and published by Springer Science & Business Media. This book was released on 2008-07-23 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shells and plates are critical structures in numerous engineering applications. Analysis and design of these structures is of continuing interest to the scienti c and engineering communities. Accurate and conservative assessments of the maximum load carried by a structure, as well as the equilibrium path in both the elastic and inelastic range, are of paramount importance to the engineer. The elastic behavior of shells has been closely investigated, mostly by means of the nite element method. Inelastic analysis however, especially accounting for damage effects, has received much less attention from researchers. In this book, we present a computational model for nite element, elasto-plastic, and damage analysis of thin and thick shells. Formulation of the model proceeds in several stages. First, we develop a theory for thick spherical shells, providing a set of shell constitutive equations. These equations incorporate the effects of transverse shear deformation, initial curvature, and radial stresses. The proposed shell equations are conveniently used in nite element analysis. 0 AsimpleC quadrilateral, doubly curved shell element is developed. By means of a quasi-conforming technique, shear and membrane locking are prevented. The element stiffness matrix is given explicitly, making the formulation computationally ef cient. We represent the elasto-plastic behavior of thick shells and plates by means of the non-layered model, using an Updated Lagrangian method to describe a small-strain geometric non-linearity. For the treatment of material non-linearities, we adopt an Iliushin’s yield function expressed in terms of stress resultants, with isotropic and kinematic hardening rules.
Download or read book Computational Model for Elasto plastic and Damage Analysis of Plates and Shells written by Pawel Woelke and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Analyses of Laminated Plates and Shells with Damage written by Yi-Ming Fu and published by WIT Press. This book was released on 2013 with total page 797 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contents of this book are related to composite mechanics, nonlinear plate and shell mechanics, damage mechanics, elasto-plastic mechanics, visco-elastic mechanics, piezoelectric elastic mechanics and nonlinear dynamics, which embody the combination and integration among solid mechanics, material science and nonlinear science.
Download or read book Elasto plastic Analysis of Orthotropic Plates and Shells written by Benjamin Whang and published by . This book was released on 1968 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: A finite element displacement method is developed for the elasto-plastic analysis of bi-linear strain-hardening orthotropic plates and shells. Two basic approaches in the elasto-plastic analysis, the 'initial stiffness' approach and the 'tangent stiffness' approach are presented and compared. Three separate computer programs have been written; the first two are for the plane stress case. The third program is for the rectangular shallow shells, and it uses elements whose thicknesses are subdivided into equally-spaced layers, each of which is assumed to be in plane stress. (Author).
Download or read book Theory and Analysis of Elastic Plates and Shells Second Edition written by J. N. Reddy and published by CRC Press. This book was released on 2006-11-20 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because plates and shells are common structural elements in aerospace, automotive, and civil engineering structures, engineers must understand the behavior of such structures through the study of theory and analysis. Compiling this information into a single volume, Theory and Analysis of Elastic Plates and Shells, Second Edition presents a complete, up-to-date, and unified treatment of classical and shear deformation plates and shells, from the basic derivation of theories to analytical and numerical solutions. Revised and updated, this second edition incorporates new information in most chapters, along with some rearrangement of topics to improve the clarity of the overall presentation. The book presents new material on the theory and analysis of shells, featuring an additional chapter devoted to the topic. The author also includes new sections that address Castigliano's theorems, axisymmetric buckling of circular plates, the relationships between the solutions of classical and shear deformation theories, and the nonlinear finite element analysis of plates. The book provides many illustrations of theories, formulations, and solution methods, resulting in an easy-to-understand presentation of the topics. Like the previous edition, this book remains a suitable textbook for a course on plates and shells in aerospace, civil, and mechanical engineering curricula and continues to serve as a reference for industrial and academic structural engineers and scientists.
Download or read book Plates and Shells written by Ansel C. Ugural and published by CRC Press. This book was released on 2017-10-02 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noted for its practical, accessible approach to senior and graduate-level engineering mechanics, Plates and Shells: Theory and Analysis is a long-time bestselling text on the subjects of elasticity and stress analysis. Many new examples and applications are included to review and support key foundational concepts. Advanced methods are discussed and analyzed, accompanied by illustrations. Problems are carefully arranged from the basic to the more challenging level. Computer/numerical approaches (Finite Difference, Finite Element, MATLAB) are introduced, and MATLAB code for selected illustrative problems and a case study is included.
Download or read book Computational Plasticity written by Mao-Hong Yu and published by Springer Science & Business Media. This book was released on 2012-12-02 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Computational Plasticity with Emphasis on the Application of the Unified Strength Theory” explores a new and important branch of computational mechanics and is the third book in a plasticity series published by Springer. The other two are: Generalized Plasticity, Springer: Berlin, 2006; and Structural Plasticity, Springer and Zhejiang University Press: Hangzhou, 2009. This monograph describes the unified strength theory and associated flow rule, the implementation of these basic theories in computational programs, and shows how a series of results can be obtained by using them. The unified strength theory has been implemented in several special nonlinear finite-element programs and commercial Finite Element Codes by individual users and corporations. Many new and interesting findings for beams, plates, underground caves, excavations, strip foundations, circular foundations, slop, underground structures of hydraulic power stations, pumped-storage power stations, underground mining, high-velocity penetration of concrete structures, ancient structures, and rocket components, along with relevant computational results, are presented. This book is intended for graduate students, researchers and engineers working in solid mechanics, engineering and materials science. The theories and methods provided in this book can also be used for other computer codes and different structures. More results can be obtained, which put the potential strength of the material to better use, thus offering material-saving and energy-saving solutions. Mao-Hong Yu is a professor at the Department of Civil Engineering at Xi'an Jiaotong University, Xi'an, China.
Download or read book Plastic Limit Analysis of Plates Shells and Disks written by M.A. Save and published by Elsevier. This book was released on 1997-12-18 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised and updated edition of a book first published in 1972 has kept the general features of the first edition but as could be expected after two decades there are also substantial differences. For instance optimal design has been completely deleted as the developments in this field have been so great that it warrants a book in itself. The fundamental concepts based on Drucker's postulate rather than those of Prager's assumptions function have been introduced. Problems of cyclic loading have been given some more extensive treatment, both in the general theory and in applications. General indications and references have been added for reinforced concrete plates and shells. A general presentation of the yield condition for both plates and shells has been included and the section on the influence of axial force in plates has been almost re-written. Finally, a chapter has been added exclusively devoted to the numerical approach to limit load and shake-down load evaluation. Like the previous edition the book is directed towards engineering applications. The theory is rigorously developed and is therefore of great use to engineering students in plastic limit analysis. Furthermore, applications to metal and reinforced concrete plates and shells and to metal disks are treated by both analytical and numerical approaches.
Download or read book Advances in the Theory of Plates and Shells written by George Voyiadjis and published by Elsevier. This book was released on 2013-10-22 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plates and shells play an important role in structural, mechanical, aerospace and manufacturing applications. The theory of plates and shells have advanced in the past two decades to handle more complicated problems that were previously beyond reach. In this book, the most recent advances in this area of research are documented. These include topics such as thick plate and shell analyses, finite rotations of shell structures, anisotropic thick plates, dynamic analysis, and laminated composite panels. The book is divided into two parts. In Part I, emphasis is placed on the theoretical aspects of the analysis of plates and shells, while Part II deals with modern applications. Numerous eminent researchers in the various areas of plate and shell analyses have contributed to this work which pays special attention to aspects of research such as theory, dynamic analysis, and composite plates and shells.
Download or read book Large Deflection Analysis of Elastic plastic Plates and Shells written by Pedro V. Marçal and published by . This book was released on 1969 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt: A finite element method is described for the large displacement elastic-plastic analysis of plates and shells. The method combines the piecewise linear geometric stiffness matrices with the piecewise linear generalized stress strain relations for an elastic-plastic shell. The method is discussed with special reference to a triangular plate element with membrane stretching and flexure. A quadratic displacement function was used for the in-plane displacements, and a piecewise modified complete cubic displacement function was used for the out-of-plane displacements. This last resulted in a nonconforming element which exhibited good convergence features. The method was implemented on a general purpose computer program. Case studies were made of simply supported square plates under uniform pressure. Studies were also made of axisymmetric shells using an axisymmetric shell element. Reselts for both types of structures were found to agree with available theoretical and experimental results in the literature. (Author).
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1970 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research and Applications in Structural Engineering Mechanics and Computation written by Alphose Zingoni and published by CRC Press. This book was released on 2013-08-15 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and Applications in Structural Engineering, Mechanics and Computation contains the Proceedings of the Fifth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2013, Cape Town, South Africa, 2-4 September 2013). Over 420 papers are featured. Many topics are covered, but the contributions may be seen to fall
Download or read book Computational Fluid and Solid Mechanics 2003 written by K.J Bathe and published by Elsevier. This book was released on 2003-06-02 with total page 2485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the world's leading researchers and practitioners of computational mechanics, these new volumes meet and build on the eight key challenges for research and development in computational mechanics. Researchers have recently identified eight critical research tasks facing the field of computational mechanics. These tasks have come about because it appears possible to reach a new level of mathematical modelling and numerical solution that will lead to a much deeper understanding of nature and to great improvements in engineering design.The eight tasks are: The automatic solution of mathematical models Effective numerical schemes for fluid flows The development of an effective mesh-free numerical solution method The development of numerical procedures for multiphysics problems The development of numerical procedures for multiscale problems The modelling of uncertainties The analysis of complete life cycles of systems Education - teaching sound engineering and scientific judgement Readers of Computational Fluid and Solid Mechanics 2003 will be able to apply the combined experience of many of the world's leading researchers to their own research needs. Those in academic environments will gain a better insight into the needs and constraints of the industries they are involved with; those in industry will gain a competitive advantage by gaining insight into the cutting edge research being carried out by colleagues in academia. Features Bridges the gap between academic researchers and practitioners in industry Outlines the eight main challenges facing Research and Design in Computational mechanics and offers new insights into the shifting the research agenda Provides a vision of how strong, basic and exciting education at university can be harmonized with life-long learning to obtain maximum value from the new powerful tools of analysis
Download or read book Comprehensive Structural Integrity written by Ian Milne and published by Elsevier. This book was released on 2003-07-25 with total page 4647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elasto Plastic Behavior of Plates and Shells written by and published by . This book was released on 1976 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: For an isotropic solid shell, a yield condition, a strain-hardening rule, and a flow rule have been formulated in terms of the membrane forces and bending moments and the strains and curvatures of the middle surface. The results of the proposed theory are compared to the results of the through-the- thickness integration of the stress-strain relations of the material.
