Download or read book Computational methods versus testing written by IMechE Aerospace Division and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computational Methods and Experiments in Materials Characterization III written by C. A. Brebbia and published by WIT Press. This book was released on 2007 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently, engineering materials could be characterized successfully using relatively simple testing procedures. As materials technology advances, interest is growing in materials possessing complex meso-, micro- and nano-structures, which to a large extent determine their physical properties and behaviour. The purposes of materials modelling are many: optimization, investigation of failure, simulation of production processes, to name but a few. Modelling and characterisation are closely intertwined, increasingly so as the complexity of the material increases. Characterisation, in essence, is the connection between the abstract material model and the real-world behaviour of the material in question. Characterisation of complex materials therefore may require a combination of experimental techniques and computation. This book publishes papers presented at the Third International Conference on Computational Methods and Experiments in Material Characterisation.Topics covered include: Composites; Ceramics; Alloys; Cements and Cement Based Materials; Biomaterials; Thin Films and Coatings; Advanced Materials; Imaging Analysis; Thermal Analysis; New Methods; Surface Chemistry, Nano Indentation; Continuum Methods; Particle Models; Damage Mechanics; Innovative Techniques; Stochastic Methods.

Download or read book Fundamentals of Computational Methods for Engineers written by Md. Masud Rana and published by Bentham Science Publishers. This book was released on 2022-06-01 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook bridges the gap between introductory and advanced numerical methods for engineering students. The book initially introduces readers to numerical methods before progressing to linear and nonlinear equations. Next, the book covers the topics of interpolation, curve fitting and approximation, integration, differentiation and differential equations. The book concludes with a chapter on advanced mathematical analysis which explains methods for finite difference, method of moments and finite elements. The book introduces readers to key concepts in engineering such as error analysis, algorithms, applied mathematics with the goal of giving an understanding of how to solve engineering problems using computational methods. Each of the featured topics is explained with sufficient detail while retaining the usual introductory nuance. This blend of beginner-friendly and applied information, along with reference listings makes the textbook useful to students of undergraduate and introductory graduate courses in mathematics and engineering.

Download or read book Computational Methods in Statistics and Econometrics written by Hisashi Tanizaki and published by CRC Press. This book was released on 2004-01-21 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting current technological capacities and analytical trends, Computational Methods in Statistics and Econometrics showcases Monte Carlo and nonparametric statistical methods for models, simulations, analyses, and interpretations of statistical and econometric data. The author explores applications of Monte Carlo methods in Bayesian estimation, state space modeling, and bias correction of ordinary least squares in autoregressive models. The book offers straightforward explanations of mathematical concepts, hundreds of figures and tables, and a range of empirical examples. A CD-ROM packaged with the book contains all of the source codes used in the text.

Download or read book Computational Methods Seismic Protection Hybrid Testing and Resilience in Earthquake Engineering written by Gian Paolo Cimellaro and published by Springer. This book was released on 2014-09-16 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a tribute to the research contribution of Professor Andrei Reinhorn in the field of earthquake engineering. It covers all the aspects connected to earthquake engineering starting from computational methods, hybrid testing and control, resilience and seismic protection which have been the main research topics in the field of earthquake engineering in the last 30 years. These were all investigated by Prof. Reinhorn throughout his career. The book provides the most recent advancements in these four different fields, including contributions coming from six different countries giving an international outlook to the topics.

Download or read book Analytic Methods in Systems and Software Testing written by Ron S. Kenett and published by John Wiley & Sons. This book was released on 2018-07-06 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of systems and software testing using state of the art methods and tools This book provides valuable insights into state of the art software testing methods and explains, with examples, the statistical and analytic methods used in this field. Numerous examples are used to provide understanding in applying these methods to real-world problems. Leading authorities in applied statistics, computer science, and software engineering present state-of-the-art methods addressing challenges faced by practitioners and researchers involved in system and software testing. Methods include: machine learning, Bayesian methods, graphical models, experimental design, generalized regression, and reliability modeling. Analytic Methods in Systems and Software Testing presents its comprehensive collection of methods in four parts: Part I: Testing Concepts and Methods; Part II: Statistical Models; Part III: Testing Infrastructures; and Part IV: Testing Applications. It seeks to maintain a focus on analytic methods, while at the same time offering a contextual landscape of modern engineering, in order to introduce related statistical and probabilistic models used in this domain. This makes the book an incredibly useful tool, offering interesting insights on challenges in the field for researchers and practitioners alike. Compiles cutting-edge methods and examples of analytical approaches to systems and software testing from leading authorities in applied statistics, computer science, and software engineering Combines methods and examples focused on the analytic aspects of systems and software testing Covers logistic regression, machine learning, Bayesian methods, graphical models, experimental design, generalized regression, and reliability models Written by leading researchers and practitioners in the field, from diverse backgrounds including research, business, government, and consulting Stimulates research at the theoretical and practical level Analytic Methods in Systems and Software Testing is an excellent advanced reference directed toward industrial and academic readers whose work in systems and software development approaches or surpasses existing frontiers of testing and validation procedures. It will also be valuable to post-graduate students in computer science and mathematics.

Download or read book High Performance Computational Methods for Biological Sequence Analysis written by Tieng K. Yap and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Performance Computational Methods for Biological Sequence Analysis presents biological sequence analysis using an interdisciplinary approach that integrates biological, mathematical and computational concepts. These concepts are presented so that computer scientists and biomedical scientists can obtain the necessary background for developing better algorithms and applying parallel computational methods. This book will enable both groups to develop the depth of knowledge needed to work in this interdisciplinary field. This work focuses on high performance computational approaches that are used to perform computationally intensive biological sequence analysis tasks: pairwise sequence comparison, multiple sequence alignment, and sequence similarity searching in large databases. These computational methods are becoming increasingly important to the molecular biology community allowing researchers to explore the increasingly large amounts of sequence data generated by the Human Genome Project and other related biological projects. The approaches presented by the authors are state-of-the-art and show how to reduce analysis times significantly, sometimes from days to minutes. High Performance Computational Methods for Biological Sequence Analysis is tremendously important to biomedical science students and researchers who are interested in applying sequence analyses to their studies, and to computational science students and researchers who are interested in applying new computational approaches to biological sequence analyses.

Download or read book Computational Methods in Science and Engineering written by Gevorg Poghosyan and published by KIT Scientific Publishing. This book was released on 2014-08-22 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this proceedings volume we provide a compilation of article contributions equally covering applications from different research fields and ranging from capacity up to capability computing. Besides classical computing aspects such as parallelization, the focus of these proceedings is on multi-scale approaches and methods for tackling algorithm and data complexity. Also practical aspects regarding the usage of the HPC infrastructure and available tools and software at the SCC are presented.

Download or read book Computational Methods for Reinforced Concrete Structures written by Ulrich Häußler-Combe and published by John Wiley & Sons. This book was released on 2014-09-23 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Das vorliegende Buch behandelt die Anwendung numerischer Methoden auf die Berechnung von Stahlbetontragwerken. Rissbildung, Verbundwirkung und nichtlineares zeitabhängiges Spannungs-Dehnungs-Verhalten der Stahlbetonelemente lassen sich mit der Elastizitätstheorie allein nicht darstellen. Die Erfassung solcher Phänomene ist jedoch für die Untersuchung der Grenzzustände der Tragfähigkeit und der Gebrauchstauglichkeit erforderlich. Dieses Buch gibt eine anwendungsbezogene Zusammenfassung der numerischen Methoden einschließlich FEM. Der Schlüssel dazu liegt in der Beschreibung und im Verständnis des Materialverhaltens. Die wichtigsten Materialeigenschaften von Beton und Bewehrungsstahl und ihre Verbundwirkung werden erläutert. Mit diesen Grundlagen werden verschiedene Elemente wie Stäbe, Balken, Stabwerkmodell, Platten, Scheiben und Schalen behandelt. Dabei werden Vorspannung, Rissbildung, nichtlineares Spannung-Dehnungs-Verhalten, Kriechen, Schwinden und Temperatureinwirkungen berücksichtigt. Für alle Tragelemente werden die jeweils geeigneten Methoden hergeleitet. Dynamische Aufgaben und quasi-statische Kurzzeiteinwirkungen sowie vorübergehende Prozesse wie Kriechen und Schwinden werden gelöst. Die Problemstellungen werden anhand von zahlreichen Beispielen veranschaulicht. Diese sind mit dem Programmpaket ConFem berechnet, welches zusammen mit den Eingabedaten unter Open-Source-Bedingungen unter www.concrete-fem.com zur Verfügung steht. Der Autor zeigt die Möglichkeiten und Grenzen der numerischen Methoden der Baustatik zur Simulation von Stahlbetontragwerken auf. Ein Buch für Studium, Lehre und Forschung, ebenso wie für Tragwerksplaner und Prüfingenieure.

Download or read book Computational Methods in Electromagnetic Compatibility written by Dragan Poljak and published by John Wiley & Sons. This book was released on 2018-05-10 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a comprehensive overview of the recent advances in the area of computational electromagnetics Computational Method in Electromagnetic Compatibility offers a review of the most recent advances in computational electromagnetics. The authors—noted experts in the field—examine similar problems by taking different approaches related to antenna theory models and transmission line methods. They discuss various solution methods related to boundary integral equation techniques and finite difference techniques. The topics covered are related to realistic antenna systems including antennas for air traffic control or ground penetrating radar antennas; grounding systems (such as grounding systems for wind turbines); biomedical applications of electromagnetic fields (such as transcranial magnetic stimulation); and much more. The text features a number of illustrative computational examples and a reference list at the end of each chapter. The book is grounded in a rigorous theoretical approach and offers mathematical details of the formulations and solution methods. This important text: Provides a trade-off between a highly efficient transmission line approach and antenna theory models providing analysis of high frequency and transient phenomena Contains the newest information on EMC analysis and design principles Discusses electromagnetic field coupling to thin wire configurations and modeling in bioelectromagnetics Written for engineering students, senior researchers and practicing electrical engineers, Computational Method in Electromagnetic Compatibility provides a valuable resource in the design of equipment working in a common electromagnetic environment.

Download or read book Computational Methods in Contact Mechanics V written by Jose Dominguez and published by Computational Mechanics. This book was released on 2001 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering fields such as fracture mechanics, fatigue, friction and wear, contact mechanics, and damage are closely related and responsible for the reliability and durability of mechanical systems. The importance of contact mechanics problems - complex, time dependent and highly non-linear problems due to changes in the geometry and friction over contact surfaces - has been established in recent years, while the development of modern computational methods means that it now possible to solve complex problems for which there are no analytical solutions.

Download or read book Aerospace Application of Computational Methods Versus Testing written by IMechE (Institution of Mechanical Engineers) and published by Wiley. This book was released on 1998-03-13 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'We've designed it by computer, therefore we don't need to test it'. How valid is this argument? Computers are increasingly being used in all phases of system design, development, and evaluation of aircraft and their systems. As the use of computational methods increases, confidence in their use is growing. Testing is expensive and there is growing pressure to minimize its use. Engineers have to be sure that their actions stand up to scrutiny. Do the software packages and techniques provide adequate integrity and assurance? This volume examines the present situation and explores the extent to which computational techniques may be relied upon to replace established testing procedures. It will be of great interest and value to those in the aerospace industries, and indeed all engineers involved in fields using computational methods and testing.

Download or read book Computational Methods In Sciences And Engineering Proceedings Of The International Conference Iccmse 2003 written by Theodore E Simos and published by World Scientific. This book was released on 2003-08-26 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past few decades, many significant insights have been gained into several areas of computational methods in sciences and engineering. New problems and methodologies have appeared in some areas of sciences and engineering. There is always a need in these fields for the advancement of information exchange.The aim of this book is to facilitate the sharing of ideas, problems and methodologies between computational scientists and engineers in several disciplines. Extended abstracts of papers on the recent advances regarding computational methods in sciences and engineering are provided. The book briefly describes new methods in numerical analysis, computational mathematics, computational and theoretical physics, computational and theoretical chemistry, computational biology, computational mechanics, computational engineering, computational medicine, high performance computing, etc.

Download or read book Computational Methods for Electromagnetic and Optical Systems Second Edition written by John M. Jarem and published by CRC Press. This book was released on 2011 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text examines a variety of spectral computational techniques— including k-space theory, Floquet theory and beam propagation— that are used to analyze electromagnetic and optical problems. The authors tie together different applications in EM and optics in which the state variable method is used. Emphasizing the analysis of planar diffraction gratings using rigorous coupled wave analysis, the book presents many cases that are analyzed using a full-field vector approach to solve Maxwell’s equations in anisotropic media where a standard wave equation approach is intractable.

Download or read book Fields Networks Computational Methods and Systems in Modern Electrodynamics written by Peter Russer and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: On June 1St 2004 the Faculty of Electrical Engineering and Information Technology of the Technische Universitat Miinchen bestowed the degree of the doctor honoris causa to Leopold B. Felsen, for extraordinary achievements in the theory of electromag netic fields. On this occasion on June 1St and 2nd 2004 at the Technische Universitat Miinchen a symposium on "Fields, Networks, Computational Methods, and Systems: A Modern View of Engineering Electrodynamics" in honor of Leopold B. Felsen was organized. The symposium topic focused on an important area of Leopold Felsen research interests and, as the title emphasizes, on a modern view of applied Electro dynamics. While the fundamental physical laws of electrodynamics are well known, research in this field is experiencing a steady continuous growth. The problem -solving approaches of, say, twenty years ago may seem now fairly obsolete since considerable progress has been made in the meantime. In this monograph we collect samples of present day state of the art in dealing with electromagnetic fields, their network theory representation, their computation and, finally, on system applications. The network formulation of field problems can improve the problem formulation and also contribute to the solution methodology. Network theory systematic approaches for circuit analysis are based on the separation of the circuit into the connection circuit and the circuit elements. Many applications in science and technology rely on computations of the electromagnetic field in either man-made or natural complex structures.

Download or read book Computational Methods in Nonlinear Structural and Solid Mechanics written by Ahmed K. Noor and published by Elsevier. This book was released on 2014-05-20 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Methods in Nonlinear Structural and Solid Mechanics covers the proceedings of the Symposium on Computational Methods in Nonlinear Structural and Solid Mechanics. The book covers the development of efficient discretization approaches; advanced numerical methods; improved programming techniques; and applications of these developments to nonlinear analysis of structures and solids. The chapters of the text are organized into 10 parts according to the issue they tackle. The first part deals with nonlinear mathematical theories and formulation aspects, while the second part covers computational strategies for nonlinear programs. Part 3 deals with time integration and numerical solution of nonlinear algebraic equations, while Part 4 discusses material characterization and nonlinear fracture mechanics, and Part 5 tackles nonlinear interaction problems. The sixth part discusses seismic response and nonlinear analysis of concrete structure, and the seventh part tackles nonlinear problems for nuclear reactors. Part 8 covers crash dynamics and impact problems, while Part 9 deals with nonlinear problems of fibrous composites and advanced nonlinear applications. The last part discusses computerized symbolic manipulation and nonlinear analysis software systems. The book will be of great interest to numerical analysts, computer scientists, structural engineers, and other professionals concerned with nonlinear structural and solid mechanics.

Download or read book Computational Biomedicine written by Peter Coveney and published by Oxford University Press, USA. This book was released on 2014-06 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Biomedicine unifies the different strands of a broad-ranging subject to demonstrate the power of a tool that has the potential to revolutionise our understanding of the human body, and the therapeutic strategies available to maintain and protect it.