Download or read book Computational Methods in Chemical Engineering with Maple written by Ralph E. White and published by Springer Science & Business Media. This book was released on 2010-02-06 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents Maple solutions to a wide range of problems relevant to chemical engineers and others. Many of these solutions use Maple’s symbolic capability to help bridge the gap between analytical and numerical solutions. The readers are strongly encouraged to refer to the references included in the book for a better understanding of the physics involved, and for the mathematical analysis. This book was written for a senior undergraduate or a first year graduate student course in chemical engineering. Most of the examples in this book were done in Maple 10. However, the codes should run in the most recent version of Maple. We strongly encourage the readers to use the classic worksheet (*. mws) option in Maple as we believe it is more user-friendly and robust. In chapter one you will find an introduction to Maple which includes simple basics as a convenience for the reader such as plotting, solving linear and nonlinear equations, Laplace transformations, matrix operations, ‘do loop,’ and ‘while loop. ’ Chapter two presents linear ordinary differential equations in section 1 to include homogeneous and nonhomogeneous ODEs, solving systems of ODEs using the matrix exponential and Laplace transform method. In section two of chapter two, nonlinear ordinary differential equations are presented and include simultaneous series reactions, solving nonlinear ODEs with Maple’s ‘dsolve’ command, stop conditions, differential algebraic equations, and steady state solutions. Chapter three addresses boundary value problems.

Download or read book Computer Methods in Chemical Engineering written by Nayef Ghasem and published by CRC Press. This book was released on 2021-11-23 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: While various software packages have become essential for performing unit operations and other kinds of processes in chemical engineering, the fundamental theory and methods of calculation must also be understood to effectively test the validity of these packages and verify the results. Computer Methods in Chemical Engineering, Second Edition presents the most used simulation software along with the theory involved. It covers chemical engineering thermodynamics, fluid mechanics, material and energy balances, mass transfer operations, reactor design, and computer applications in chemical engineering. The highly anticipated Second Edition is thoroughly updated to reflect the latest updates in the featured software and has added a focus on real reactors, introduces AVEVA Process Simulation software, and includes new and updated appendixes. Through this book, students will learn the following: What chemical engineers do The functions and theoretical background of basic chemical engineering unit operations How to simulate chemical processes using software packages How to size chemical process units manually and with software How to fit experimental data How to solve linear and nonlinear algebraic equations as well as ordinary differential equations Along with exercises and references, each chapter contains a theoretical description of process units followed by numerous examples that are solved step by step via hand calculation and computer simulation using Hysys/UniSim, PRO/II, Aspen Plus, and SuperPro Designer. Adhering to the Accreditation Board for Engineering and Technology (ABET) criteria, the book gives chemical engineering students and professionals the tools to solve real problems involving thermodynamics and fluid-phase equilibria, fluid flow, material and energy balances, heat exchangers, reactor design, distillation, absorption, and liquid extraction. This new edition includes many examples simulated by recent software packages. In addition, fluid package information is introduced in correlation to the numerical problems in book. An updated solutions manual and PowerPoint slides are also provided in addition to new video guides and UniSim program files.

Download or read book Computational Methods in Chemical Engineering written by Owen T. Hanna and published by Prentice Hall. This book was released on 1995 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authors Owen Hanna and Orville Sandall include broad use of convergence acceleration techniques such as Pade approximation for series; Shanks transformation for series; linear and nonlinear systems of algebraic equations; systematic use of global Richardson extrapolation for integrals and ODE systems to monitor the overall error; and discussion of methods for the solution of stiff ODE.

Download or read book Computational Techniques For Chemical Engineers written by H.H. Rosenbrock and published by . This book was released on 1966 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Methods for Chemical Engineering written by Kenneth J. Beers and published by Cambridge University Press. This book was released on 2007 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of numerical mathematics and scientific computing to chemical engineering.

Download or read book Computational Methods in Catalysis and Materials Science written by Rutger A. van Santen and published by John Wiley & Sons. This book was released on 2015-11-19 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide describes the basic computational methodologies for catalysis and materials science at an introductory level, presenting the methods with relevant applications, such as spectroscopic properties, chemical reactivity and transport properties of catalytically interesting materials. Edited and authored by internationally recognized scientists, the text provides examples that may be considered and followed as state-of-the art.

Download or read book Computational Methods for Process Simulation written by W. Fred Ramirez and published by Butterworth-Heinemann. This book was released on 1997-11-20 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Modelling and simulation have proved to be extremely successful engineering tools for the design and optimisation of physical, chemical and biochemical processes. The use of simulation has expanded rapidly over the last two decades because of the availability of large high-speed computers and indeed has become even more widespread with the rise of the desk-top PC resources now available to nearly every engineer and student. In the chemical industry large, realistic non-linear problems are routinely solved with the aid of computer simulation. This has a number of benefits, including easy assessment of the economic desirability of a project, convenient investigation of the effects of changes to system variables, and finally the introduction of mathematical rigour into the design process and inherent assumptions that may not have been there before. Computational Methods for Process Simulation develops the methods needed for the simulation of real processes to be found in the process industries. It also stresses the engineering fundamentals used in developing process models. Steady state and dynamic systems are considered, for both spatially lumped and spatially distributed problems. It develops analytical and numerical computational techniques for algebraic, ordinary and partial differential equations, and makes use of computer software routines that are widely available. Dedicated software examples are available via the internet. Written for a compulsory course element in the US Includes examples using software used in academia and industry Software available via the Internet

Download or read book Problem Solving in Chemical Engineering with Numerical Methods written by Michael B. Cutlip and published by Prentice Hall. This book was released on 1999 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: "A companion book including interactive software for students and professional engineers who want to utilize problem-solving software to effectively and efficiently obtain solutions to realistic and complex problems. An Invaluable reference book that discusses and Illustrates practical numerical problem solving in the core subject areas of Chemical Engineering. Problem Solving in Chemical Engineering with Numerical Methods provides an extensive selection of problems that require numerical solutions from throughout the core subject areas of chemical engineering. Many are completely solved or partially solved using POLYMATH as the representative mathematical problem-solving software, Ten representative problems are also solved by Excel, Maple, Mathcad, MATLAB, and Mathematica. All problems are clearly organized and all necessary data are provided. Key equations are presented or derived. Practical aspects of efficient and effective numerical problem solving are emphasized. Many complete solutions are provided within the text and on the CD-ROM for use in problem-solving exercises."--BOOK JACKET.Title Summary field provided by Blackwell North America, Inc. All Rights Reserved

Download or read book Numerical Techniques for Chemical and Biological Engineers Using MATLAB written by Said S.E.H. Elnashaie and published by Springer Science & Business Media. This book was released on 2007-03-12 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: This interdisciplinary book presents numerical techniques needed for chemical and biological engineers using Matlab. The book begins by exploring general cases, and moves on to specific ones. The text includes a large number of detailed illustrations, exercises and industrial examples. The book provides detailed mathematics and engineering background in the appendixes, including an introduction to Matlab. The text will be useful to undergraduate students in chemical/biological engineering, and in applied mathematics and numerical analysis.

Download or read book Computational Engineering Introduction to Numerical Methods written by Michael Schäfer and published by Springer Nature. This book was released on 2021-07-19 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical simulation methods in all engineering disciplines gains more and more importance. The successful and efficient application of such tools requires certain basic knowledge about the underlying numerical techniques. The text gives a practice-oriented introduction in modern numerical methods as they typically are applied in mechanical, chemical, or civil engineering. Problems from heat transfer, structural mechanics, and fluid mechanics constitute a thematical focus of the text. For the basic understanding of the topic aspects of numerical mathematics, natural sciences, computer science, and the corresponding engineering area are simultaneously important. Usually, the necessary information is distributed in different textbooks from the individual disciplines. In the present text the subject matter is presented in a comprehensive multidisciplinary way, where aspects from the different fields are treated insofar as it is necessary for general understanding. Overarching aspects and important questions related to accuracy, efficiency, and cost effectiveness are discussed. The topics are presented in an introductory manner, such that besides basic mathematical standard knowledge in analysis and linear algebra no further prerequisites are necessary. The book is suitable either for self-study or as an accompanying textbook for corresponding lectures. It can be useful for students of engineering disciplines as well as for computational engineers in industrial practice.

Download or read book Numerical Methods for Chemical Engineers Using Excel VBA and MATLAB written by Victor J. Law and published by CRC Press. This book was released on 2013-04-08 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: While teaching the Numerical Methods for Engineers course over the last 15 years, the author found a need for a new textbook, one that was less elementary, provided applications and problems better suited for chemical engineers, and contained instruction in Visual Basic® for Applications (VBA). This led to six years of developing teaching notes that have been enhanced to create the current textbook, Numerical Methods for Chemical Engineers Using Excel®, VBA, and MATLAB®. Focusing on Excel gives the advantage of it being generally available, since it is present on every computer—PC and Mac—that has Microsoft Office installed. The VBA programming environment comes with Excel and greatly enhances the capabilities of Excel spreadsheets. While there is no perfect programming system, teaching this combination offers knowledge in a widely available program that is commonly used (Excel) as well as a popular academic software package (MATLAB). Chapters cover nonlinear equations, Visual Basic, linear algebra, ordinary differential equations, regression analysis, partial differential equations, and mathematical programming methods. Each chapter contains examples that show in detail how a particular numerical method or programming methodology can be implemented in Excel and/or VBA (or MATLAB in chapter 10). Most of the examples and problems presented in the text are related to chemical and biomolecular engineering and cover a broad range of application areas including thermodynamics, fluid flow, heat transfer, mass transfer, reaction kinetics, reactor design, process design, and process control. The chapters feature "Did You Know" boxes, used to remind readers of Excel features. They also contain end-of-chapter exercises, with solutions provided.

Download or read book Chemical Engineering Computation with MATLAB written by Yeong Koo Yeo and published by CRC Press. This book was released on 2020-12-15 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Computation with MATLAB®, Second Edition continues to present basic to advanced levels of problem-solving techniques using MATLAB as the computation environment. The Second Edition provides even more examples and problems extracted from core chemical engineering subject areas and all code is updated to MATLAB version 2020. It also includes a new chapter on computational intelligence and: Offers exercises and extensive problem-solving instruction and solutions for various problems Features solutions developed using fundamental principles to construct mathematical models and an equation-oriented approach to generate numerical results Delivers a wealth of examples to demonstrate the implementation of various problem-solving approaches and methodologies for problem formulation, problem solving, analysis, and presentation, as well as visualization and documentation of results Includes an appendix offering an introduction to MATLAB for readers unfamiliar with the program, which will allow them to write their own MATLAB programs and follow the examples in the book Provides aid with advanced problems that are often encountered in graduate research and industrial operations, such as nonlinear regression, parameter estimation in differential systems, two-point boundary value problems and partial differential equations and optimization This essential textbook readies engineering students, researchers, and professionals to be proficient in the use of MATLAB to solve sophisticated real-world problems within the interdisciplinary field of chemical engineering. The text features a solutions manual, lecture slides, and MATLAB program files._

Download or read book Computational Techniques for Chemical Engineers written by C. Storey and published by Elsevier. This book was released on 2013-10-22 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Techniques for Chemical Engineers offers a practical guide to the chemical engineer faced with a problem of computing. The computer is a servant not a master, its value depends on the instructions it is given. This book aims to help the chemical engineer in the right choice of these instructions. The text begins by outlining the principles of operation of digital and analogue computers and then discussing the difficulties which arise in formulating a problem for solution on such a machine. This is followed by separate chapters on digital computers and their programming; the use of digital computers in chemical engineering design work; optimization techniques and their application in the selection of optimum designs; the solution of sets of non-linear algebraic equations via hill-climbing; and determination of equilibrium compositions by minimization of Gibbs free energy. Subsequent chapters discuss the solution of partial or simultaneous differential equations; parameter estimation in differential equations; continuous systems; and analogue computers.

Download or read book Introduction to Chemical Engineering Computing written by Bruce A. Finlayson and published by John Wiley & Sons. This book was released on 2014-03-05 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Step-by-step instructions enable chemical engineers to master key software programs and solve complex problems Today, both students and professionals in chemical engineering must solve increasingly complex problems dealing with refineries, fuel cells, microreactors, and pharmaceutical plants, to name a few. With this book as their guide, readers learn to solve these problems using their computers and Excel, MATLAB, Aspen Plus, and COMSOL Multiphysics. Moreover, they learn how to check their solutions and validate their results to make sure they have solved the problems correctly. Now in its Second Edition, Introduction to Chemical Engineering Computing is based on the author’s firsthand teaching experience. As a result, the emphasis is on problem solving. Simple introductions help readers become conversant with each program and then tackle a broad range of problems in chemical engineering, including: Equations of state Chemical reaction equilibria Mass balances with recycle streams Thermodynamics and simulation of mass transfer equipment Process simulation Fluid flow in two and three dimensions All the chapters contain clear instructions, figures, and examples to guide readers through all the programs and types of chemical engineering problems. Problems at the end of each chapter, ranging from simple to difficult, allow readers to gradually build their skills, whether they solve the problems themselves or in teams. In addition, the book’s accompanying website lists the core principles learned from each problem, both from a chemical engineering and a computational perspective. Covering a broad range of disciplines and problems within chemical engineering, Introduction to Chemical Engineering Computing is recommended for both undergraduate and graduate students as well as practicing engineers who want to know how to choose the right computer software program and tackle almost any chemical engineering problem.

Download or read book Advanced Data Analysis and Modelling in Chemical Engineering written by Denis Constales and published by Elsevier. This book was released on 2016-08-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Data Analysis and Modeling in Chemical Engineering provides the mathematical foundations of different areas of chemical engineering and describes typical applications. The book presents the key areas of chemical engineering, their mathematical foundations, and corresponding modeling techniques. Modern industrial production is based on solid scientific methods, many of which are part of chemical engineering. To produce new substances or materials, engineers must devise special reactors and procedures, while also observing stringent safety requirements and striving to optimize the efficiency jointly in economic and ecological terms. In chemical engineering, mathematical methods are considered to be driving forces of many innovations in material design and process development. Presents the main mathematical problems and models of chemical engineering and provides the reader with contemporary methods and tools to solve them Summarizes in a clear and straightforward way, the contemporary trends in the interaction between mathematics and chemical engineering vital to chemical engineers in their daily work Includes classical analytical methods, computational methods, and methods of symbolic computation Covers the latest cutting edge computational methods, like symbolic computational methods

Download or read book Numerical Methods and Modeling for Chemical Engineers written by Mark E. Davis and published by Courier Corporation. This book was released on 2013-11-19 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text introduces the quantitative treatment of differential equations arising from modeling physical phenomena in chemical engineering. Coverage includes recent topics such as ODE-IVPs, emphasizing numerical methods and modeling of 1984-era commercial mathematical software.

Download or read book Immersed Boundary Method written by Somnath Roy and published by Springer Nature. This book was released on 2020-05-15 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the emerging applications of immersed boundary (IB) methods in computational mechanics and complex CFD calculations. It discusses formulations of different IB implementations and also demonstrates applications of these methods in a wide range of problems. It will be of special value to researchers and engineers as well as graduate students working on immersed boundary methods, specifically on recent developments and applications. The book can also be used as a supplementary textbook in advanced courses in computational fluid dynamics.