Download or read book Computational Methods for Predicting Material Processing Defects written by M. Predeleanu and published by . This book was released on 1987 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational methods for predicting material processing defects written by and published by . This book was released on 1987 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Methods for Predicting Material Processing Defects written by M. Predeleanu and published by Elsevier. This book was released on 2014-06-28 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this book deal with computational methods for predicting material processing defects. Using recent advances in finite strain plasticity and viscoplasticity, damage modelling, bifurcation and instability theory, fracture mechanics and computer numerical techniques, new approaches to mechanical defect analysis are proposed. Appropriate methods for explaining and avoiding the defects leading to fracture, high porosity, strain localization or undesirable geometrical imperfections are presented. In addition, some papers are devoted to new formulations and new calculation algorithms to be used for solving the forming problems. Finally, two papers deal with physical description of defects occurring in forming and cutting operations, focusing on the academic and practical interest of these topics.This is the first book to deal with the prediction of defects occurring in material forming processes; it contains much of interest from both a theoretical and a practical viewpoint.
Download or read book Computational methods for predicting material processing defects written by Mircea Predeleanu and published by . This book was released on 1987 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Processing Defects written by M. Predeleanu and published by Elsevier. This book was released on 1995-02-24 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technological field of defects, and more appropriately, avoidance of them, is very current in perhaps all sectors of the manufacturing industry. This is particularly important to reduce/minimize waste everywhere to address lean production procedures. The recent advances in finite plasticity and visioplasticity, damage modelling, instability theories, fracture modelling, computer numerical techniques and process simulation etc. offer new approaches and tools for defect prediction, analyses and guidelines for designing components to be manufactured by traditional and emerging process technologies. This volume contains contributions from well known researchers and experts in the field presenting an up-to-date overview of advances in this area. Subjects covered include: micro- and macro-scale observation of defects; localization and instability analysis; damage modelling and fracture criteria; defect prediction methods; design considerations to avoid defects.
Download or read book Advanced Methods in Materials Processing Defects written by M. Predeleanu and published by Elsevier. This book was released on 1997-06-18 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers focus on advanced methods for predicting and avoiding the occurrence of defects in manufactured products. A new feature is included, namely, the influence of the processing-induced defects on the integrity of structures. The following topics are developed: damage modeling; damage evaluation and rupture; strain localization and instability analysis; formability characterization; prediction of shape inaccuracies; influence of defects on structural integrity. The main manufacturing operations are covered and various materials are examined, such as new and conventional metal alloys, ceramics, polymers and composites.
Download or read book Numerical Methods for Problems in Infinite Domains written by D. Givoli and published by Elsevier. This book was released on 2013-10-22 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume reviews and discusses the main numerical methods used today for solving problems in infinite domains. It also presents in detail one very effective method in this class, namely the Dirichlet-to-Neumann (DtN) finite element method. The book is intended to provide the researcher or engineer with the state-of-the-art in numerical solution methods for infinite domain problems, such as the problems encountered in acoustics and structural acoustics, fluid dynamics, meteorology, and many other fields of application. The emphasis is on the fundamentals of the various methods, and on reporting recent progress and forecasting future directions. An appendix at the end of the book provides an introduction to the essentials of the finite element method, and suggests a short list of texts on the subject which are categorized by their level of mathematics.
Download or read book Deformation Based Processing of Materials written by Heng Li and published by Elsevier. This book was released on 2019-02-15 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deformation Based Processing of Materials: Behavior, Performance, Modeling and Control focuses on deformation based process behaviors and process performance in terms of the quality of the needed shape, geometries, and the requested properties of the deformed products. In addition, modelling and simulation is covered to create an in-depth and epistemological understanding of the process. Other topics discussed include ways to efficiently reduce or avoid defects and effectively improve the quality of deformed parts. The book is ideal as a technical document, but also serves as scientific literature for engineers, scientists, academics, research students and management professionals involved in deformation based materials processing. Covers process behaviors, such as non-uniform deformation, unstable deformation, material flow phenomena, and process performance Includes modelling and simulation of the entire deformation process Looks at control of the preferred deformation, undesirable material flow, avoidance and reduction of defects, and improving the dimensional accuracy, surface quality and microstructure construction of the produced products
Download or read book Nonlinear Computational Structural Mechanics written by Pierre Ladeveze and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book treats computational modeling of structures in which strong nonlinearities are present. It is therefore a work in mechanics and engineering, although the discussion centers on methods that are considered parts of applied mathematics. The task is to simulate numerically the behavior of a structure under various imposed excitations, forces, and displacements, and then to determine the resulting damage to the structure, and ultimately to optimize it so as to minimize the damage, subject to various constraints. The method used is iterative: at each stage an approximation to the displacements, strains, and stresses throughout the structure is computated and over all times in the interval of interest. This method leads to a general approach for understanding structural models and the necessary approximations.
Download or read book Problems of Technological Plasticity written by B. Druyanov and published by Elsevier. This book was released on 2013-10-22 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the classical rigid-plastic model of deformed workpiece and the characteristic (slipline) method of analysis is assumed. The rigid-plastic solid assumption is deemed reasonable for the problems of technological plasticity with large scale plastic flow, where small elastic stains are negligible. Along with classical results of the theory of plasticity the book includes many original analytical and numerical solutions of the problems of technological plasticity obtained by the authors in Russia and unknown for most western readers. The results of the analyses are given by analytical formulae and many graphs and tables, so the book will be useful for the practical and research engineers. It may also be used as a textbook by graduate students and engineers.
Download or read book Stability of Structures by Finite Element Methods written by Z. Waszczyszyn and published by Elsevier. This book was released on 2013-10-22 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the consequence of research undertaken by the authors in the field of advanced problems of structural mechanics. Stability analysis of structures comes under this area because of the complex models and computational methods needed for analysis. In the mid seventies, a joint effort began between a group of researchers and teachers of the Department of Civil Engineering and Computer Center of the Cracow University of Technology. One of the important results of the collaboration has been this publication.
Download or read book Mechanics of Materials and Structures written by George Z. Voyiadjis and published by Elsevier. This book was released on 2013-10-22 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide range of topics in the area of mechanics of materials and structures are covered in this volume, ranging from analysis to design. There is no special emphasis on a specific area of research. The first section of the book deals with topics on the mechanics and damage of concrete. It also includes two papers on granular packing structure changes and cumulative damage in polymers. In the second part more theoretical topics in mechanics are discussed, such as shell theory and nonlinear elasticity. The following section dicusses areas dealing primarily with plasticity, viscoelasticity, and viscoplasticity. These include such topics as dynamic and cyclic plasticity. In the final section the subject is structural dynamics, including seismic analysis, composite frames and nonlinear analysis of bridges. The volume is compiled in honor of Professor Maciej P. Bieniek who has served as a teacher and researcher at several universities, and who has made many significant contributions in the evaluation, rehabilitation, and design of infrastructures.
Download or read book Constitutive Equations for Engineering Materials written by Wai-Fah Chen and published by Elsevier. This book was released on 2013-10-22 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Constitutive Equations for Engineering Materials, Volume 1: Elasticity and Modeling, Revised Edition focuses on theories on elasticity and plasticity of engineering materials. The book first discusses vectors and tensors. Coordinate systems, vector algebra, scalar products, vector products, transformation of coordinates, indicial notation and summation convention, and triple products are then discussed. The text also ponders on analysis of stress and strain and presents numerical analysis. The book then discusses elastic stress-strain relations. Basic assumptions; need for elastic models; isotropic linear stress-strain relations; principle of virtual work; strain energy and complementary energy density in elastic solids; and incremental relations grounded on secant moduli are described. The text also explains linear elasticity and failure criteria for concrete and non-linear elasticity and hypoelastic models for concrete. The selection further tackles soil elasticity and failure criteria. Mechanical behavior of soils; failure criteria of soils; and incremental stress-strain models based on modification of the isotropic linear elastic formulation are considered. The text is a good source of data for readers interested in studying the elasticity and plasticity of engineering materials.
Download or read book Ductile Fracture in Metal Forming written by Kazutake Komori and published by Academic Press. This book was released on 2019-10-11 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ductile Fracture in Metal Forming: Modeling and Simulation examines the current understanding of the mechanics and physics of ductile fracture in metal forming processes while also providing an approach to micromechanical ductile fracture prediction that can be applied to all metal forming processes. Starting with an overview of different ductile fracture scenarios, the book then goes on to explain modeling techniques that predict a range of mechanical phenomena that can lead to ductile fracture. The challenges in creating micromechanical models are addressed alongside methods of applying these models to several common metal forming processes. This book is suitable for researchers working in mechanics of materials, metal forming, mechanical metallurgy, and plasticity. Engineers in R&D industries involved in metal forming such as manufacturing, aerospace, and automation will also find the book very useful. Explains innovative micromechanical modeling techniques for a variety of material behaviors Examines how these models can be applied to metal forming processes in practice, including blanking, arrowed cracks in drawing, and surface cracks in upset forging Provides a thorough examination of both macroscopic and microscopic ductile fracture theory
Download or read book Inelasticity and Micromechanics of Metal Matrix Composites written by George Z. Voyiadjis and published by Elsevier. This book was released on 2013-10-22 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains fifteen papers based on the presentations made at the symposium on "Inelasticity and Micromechanics of Metal Matrix Composites" held at the University of Washington, USA, in mid-1994. The papers represent the most recent work conducted on inelasticity and micromechanics of metal matrix composites. The book is divided into two parts: Part I deals with the study of inelastic deformation in metal matrix composites, while Part II tackles the micromechanical aspects of metal matrix composites. The articles discuss different aspects of these two topics ranging from purely theoretical treatments to extensive experimental investigations. Many of the papers are by prominent researchers working in this area.
Download or read book Advanced Manufacturing Systems and Technology written by E. Kuljanic and published by Springer. This book was released on 2014-05-04 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, based on the Fourth International Conference on Advanced Manufacturing Systems and Technology - AMST '96 aims at presenting trend and up-to-date information on the latest developments - research results and industrial experience in the field of machining processes, optimization and process planning, forming, flexible machining systems, non conventional machining, robotics and control, measuring and quality, thus providing an international forum for a beneficial exchange of ideas, and furthering a favourable cooperation between research and industry.
Download or read book Mechanics of Geomaterial Interfaces written by A.P.S. Selvadurai and published by Elsevier. This book was released on 1995-01-30 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of geomaterial interfaces recognizes the important influences of the interface behaviour on the performance of interfaces involving cementaceous materials such as concrete and steel, ice-structure interfaces, concrete-rock interfaces and interfaces encountered in soil reinforcement. During the past two decades, the subject of geomaterial interfaces has attracted the concerted attention of scientists and engineers both in geomechanics and applied mechanics. These efforts have been largely due to the observation that the conventional idealizations of the behaviour of interfaces between materials by frictionless contact, bonded contact, Coulomb friction or finite friction tend to omit many interesting and important influences of special relevance to geomaterials. The significant manner in which non-linear effects, dilatancy, contact degradation, hardening and softening, etc., can influence the behaviour of the interface is borne out by experimental evidence. As a result, in many instances, the response of the interface can be the governing criterion in the performance of a geomechanics problem. The primary objective of this volume is to provide a documentation of recent advances in the area of geomaterial interfaces. The volume consists of subject groupings which cover ice-structure, soil-structure and steel-concrete interfaces, mechanics of rock and concrete joints and interfaces in discrete systems.
