Download or read book Computational Methods for Microstructure Property Relationships written by Somnath Ghosh and published by Springer Science & Business Media. This book was released on 2010-11-17 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Methods for Microstructure-Property Relationships introduces state-of-the-art advances in computational modeling approaches for materials structure-property relations. Written with an approach that recognizes the necessity of the engineering computational mechanics framework, this volume provides balanced treatment of heterogeneous materials structures within the microstructural and component scales. Encompassing both computational mechanics and computational materials science disciplines, this volume offers an analysis of the current techniques and selected topics important to industry researchers, such as deformation, creep and fatigue of primarily metallic materials. Researchers, engineers and professionals involved with predicting performance and failure of materials will find Computational Methods for Microstructure-Property Relationships a valuable reference.

Download or read book Microstructure Property Optimization in Metallic Glasses written by Baran Sarac and published by Springer. This book was released on 2015-03-12 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis consists of an in-depth study of investigating microstructure-property relationships in bulk metallic glasses using a novel quantitative approach by which influence of the second phase features on mechanical properties can be independently and systematically analyzed. The author evaluates and optimizes the elastic and plastic deformation, as well as the overall toughness of cellular honeycombs under in-plane compression and porous heterostructures under uniaxial tension. The study reveals three major deformation zones in cellular metallic glass structures, where deformation changes from collective buckling showing non-linear elasticity to localized failure exhibiting a brittle-like deformation, and finally to global sudden failure with negligible plasticity as the length to thickness ratio of the ligaments increases. The author found that spacing and size of the pores, the pore configuration within the matrix, and the overall width of the sample determines the extent of deformation, where the optimized values are attained for pore diameter to spacing ratio of one with AB type pore stacking.

Download or read book Computational Materials System Design written by Dongwon Shin and published by Springer. This book was released on 2017-11-10 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state-of-the-art computational approaches for accelerating materials discovery, synthesis, and processing using thermodynamics and kinetics. The authors deliver an overview of current practical computational tools for materials design in the field. They describe ways to integrate thermodynamics and kinetics and how the two can supplement each other.

Download or read book Materials with Internal Structure written by Patrizia Trovalusci and published by Springer. This book was released on 2015-10-17 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a series of concise papers by researchers specialized in various fields of continuum and computational mechanics and of material science. The focus is on principles and strategies for multiscale modeling and simulation of complex heterogeneous materials, with periodic or random microstructure, subjected to various types of mechanical, thermal, chemical loadings and environmental effects. A wide overview of complex behavior of materials (plasticity, damage, fracture, growth, etc.) is provided. Among various approaches, attention is given to advanced non-classical continua modeling which, provided by constitutive characterization for the internal and external actions (in particular boundary conditions), is a very powerful frame for the gross mechanical description of complex material behaviors, able to circumvent the restrictions of classical coarse–graining multiscale approaches.

Download or read book Integrated Computational Materials Engineering ICME written by Somnath Ghosh and published by Springer Nature. This book was released on 2020-03-20 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​This book introduces research advances in Integrated Computational Materials Engineering (ICME) that have taken place under the aegis of the AFOSR/AFRL sponsored Center of Excellence on Integrated Materials Modeling (CEIMM) at Johns Hopkins University. Its author team consists of leading researchers in ICME from prominent academic institutions and the Air Force Research Laboratory. The book examines state-of-the-art advances in physics-based, multi-scale, computational-experimental methods and models for structural materials like polymer-matrix composites and metallic alloys. The book emphasizes Ni-based superalloys and epoxy matrix carbon-fiber composites and encompasses atomistic scales, meso-scales of coarse-grained models and discrete dislocations, and micro-scales of poly-phase and polycrystalline microstructures. Other critical phenomena investigated include the relationship between microstructural morphology, crystallography, and mechanisms to the material response at different scales; methods of identifying representative volume elements using microstructure and material characterization, and robust deterministic and probabilistic modeling of deformation and damage. Encompassing a slate of topics that enable readers to comprehend and approach ICME-related issues involved in predicting material performance and failure, the book is ideal for mechanical, civil, and aerospace engineers, and materials scientists, in in academic, government, and industrial laboratories.

Download or read book Proceedings of the 1st World Congress on Integrated Computational Materials Engineering ICME written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2011-06-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: In its most advanced form, Integrated Computational Materials Engineering (ICME) holistically integrates manufacturing simulation, advanced materials models and component performance analysis. This volume contains thirty-five papers presented at the 1st World Congress on Integrated Computational Materials Engineering. Modeling processing-microstructure relationships, modeling microstructure-property relationships, and the role of ICME in graduate and undergraduate education are discussed. Ideal as a primary text for engineering students, this book motivates a wider understanding of the advantages and limitations offered by the various computational (and coordinated experimental) tools of this field.

Download or read book Statistical Methods for Materials Science written by Jeffrey P. Simmons and published by CRC Press. This book was released on 2019-02-13 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data analytics has become an integral part of materials science. This book provides the practical tools and fundamentals needed for researchers in materials science to understand how to analyze large datasets using statistical methods, especially inverse methods applied to microstructure characterization. It contains valuable guidance on essential topics such as denoising and data modeling. Additionally, the analysis and applications section addresses compressed sensing methods, stochastic models, extreme estimation, and approaches to pattern detection.

Download or read book Homogenization of the Linear and Non linear Mechanical Behavior of Polycrystals written by Katja Jöchen and published by KIT Scientific Publishing. This book was released on 2014-05-13 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is dedicated to the numerically efficient simulation of the material response of polycrystalline aggregates. Therefore, crystal plasticity is combined with a new non-linear homogenization scheme, which is based on piecewise constant stress polarizations with respect to a homogeneous reference medium and corresponds to a generalization of the Hashin-Shtrikman scheme. This mean field approach accounts for the one- and two-point statistics of the microstructure.

Download or read book Additive Manufacturing of High Performance Metallic Materials written by Robert Pederson and published by Elsevier. This book was released on 2023-09-19 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of High-Performance Metallic Materials outlines the state-of-the-art on AM in high performance materials utilizing the two most industrially interesting routes of powder bed fusion (PBF) and directed energy deposition (DED). The book delves into Feedstock, Processing, Monitoring and control, Modeling and simulation, and Surface and thermal post-treatments. It specifically addresses materials and the most relevant and high performance applications, namely Ni-based alloys and Titanium alloys, and also provides insights into potential applications through illustrative case studies. With each chapter contributed by experts in the field, this work will serve as a comprehensive resource for graduate students and practitioners alike. - Covers the entire value chain relevant to additive manufacturing spanning feedstock, processing, monitoring, post-treatment, testing and applications - Includes the fundamental understanding of varied associated aspects derived from both extensive experimental knowledge and theoretical investigations - Addresses key materials relevant to varied high performance applications, namely Superalloys and Ni-based alloys

Download or read book Continuum Micromechanics written by Dazhi Jiang and published by Springer Nature. This book was released on 2023-03-11 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book integrates theory, numerical methods, and practical applications seamlessly. MATLAB and MathCad programs are provided for readers to master the theory, understand the approach, and to further develop and apply the methods to geological problems. Multiscale and multi-physics investigations of Earth and planetary processes have been an active trend of research in Earth Sciences, thanks to the development of scientific computation and computer software and hardware. Based on the author's research and teaching over the past 15 years, the book stands alone as the first comprehensive text in unifying fundamental continuum micromechanics theory, geometric/kinematic analysis, and applications. The book should appeal to a broad audience of students and researchers, particularly those in the fields of structural geology, tectonics, (natural and experimental) rock deformation, mineral physics and rheology, and numerical modeling of multiscale and coupling processes.

Download or read book Models Databases and Simulation Tools Needed for Realization of Integrated Computational Mat Eng ICME 2010 written by Steven M. Arnold and Terry T. Wong, Editors and published by ASM International. This book was released on 2011 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling and Simulation of Functionalized Materials for Additive Manufacturing and 3D Printing Continuous and Discrete Media written by Tarek I. Zohdi and published by Springer. This book was released on 2017-12-22 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the last decade, several industrialized countries have stressed the importance of advanced manufacturing to their economies. Many of these plans have highlighted the development of additive manufacturing techniques, such as 3D printing which, as of 2018, are still in their infancy. The objective is to develop superior products, produced at lower overall operational costs. For these goals to be realized, a deep understanding of the essential ingredients comprising the materials involved in additive manufacturing is needed. The combination of rigorous material modeling theories, coupled with the dramatic increase of computational power can potentially play a significant role in the analysis, control, and design of many emerging additive manufacturing processes. Specialized materials and the precise design of their properties are key factors in the processes. Specifically, particle-functionalized materials play a central role in this field, in three main regimes: (1) to enhance overall filament-based material properties, by embedding particles within a binder, which is then passed through a heating element and the deposited onto a surface, (2) to “functionalize” inks by adding particles to freely flowing solvents forming a mixture, which is then deposited onto a surface and (3) to directly deposit particles, as dry powders, onto surfaces and then to heat them with a laser, e-beam or other external source, in order to fuse them into place. The goal of these processes is primarily to build surface structures which are extremely difficult to construct using classical manufacturing methods. The objective of this monograph is introduce the readers to basic techniques which can allow them to rapidly develop and analyze particulate-based materials needed in such additive manufacturing processes. This monograph is broken into two main parts: “Continuum Method” (CM) approaches and “Discrete Element Method” (DEM) approaches. The materials associated with methods (1) and (2) are closely related types of continua (particles embedded in a continuous binder) and are treated using continuum approaches. The materials in method (3), which are of a discrete particulate character, are analyzed using discrete element methods.

Download or read book Handbook of Research on Recent Developments in Materials Science and Corrosion Engineering Education written by Lim, Hwee Ling and published by IGI Global. This book was released on 2015-02-28 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest research innovations and enhanced technologies have altered the discipline of materials science and engineering. As a direct result of these developments, new trends in Materials Science and Engineering (MSE) pedagogy have emerged that require attention. The Handbook of Research on Recent Developments in Materials Science and Corrosion Engineering Education brings together innovative and current advances in the curriculum design and course content of MSE education programs. Focusing on the application of instructional strategies, pedagogical frameworks, and career preparation techniques, this book is an essential reference source for academicians, engineering practitioners, researchers, and industry professionals interested in emerging and future trends in MSE training and education.

Download or read book Multiscale Modeling of Heterogeneous Structures written by Jurica Sorić and published by Springer. This book was released on 2017-11-30 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of multiscale approaches and homogenization procedures as well as damage evaluation and crack initiation, and addresses recent advances in the analysis and discretization of heterogeneous materials. It also highlights the state of the art in this research area with respect to different computational methods, software development and applications to engineering structures. The first part focuses on defects in composite materials including their numerical and experimental investigations; elastic as well as elastoplastic constitutive models are considered, where the modeling has been performed at macro- and micro levels. The second part is devoted to novel computational schemes applied on different scales and discusses the validation of numerical results. The third part discusses gradient enhanced modeling, in particular quasi-brittle and ductile damage, using the gradient enhanced approach. The final part addresses thermoplasticity, solid-liquid mixtures and ferroelectric models. The contents are based on the international workshop “Multiscale Modeling of Heterogeneous Structures” (MUMO 2016), held in Dubrovnik, Croatia in September 2016.

Download or read book Challenges in Mechanics of Time Dependent Materials Volume 2 written by Alex Arzoumanidis and published by Springer. This book was released on 2017-10-17 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​Challenges in Mechanics of Time-Dependent Materials, Volume 2 of the Proceedings of the 2017 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the second volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Characterization Across Length ScalesExtreme Environments & Environmental EffectsViscoelasticityStructure Function PerformancePolymer ViscoplasticityMetallic MaterialsFracture/Fatigue/DamageCompositesSoft Materials

Download or read book 1st International Conference on 3D Materials Science 2012 written by Marc De Graef and published by Springer. This book was released on 2016-12-02 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing a critical growth area in materials science, this volume features papers presented at the 2012 International Conference on 3D Materials Science, organized by The Minerals, Metals & Materials Society (TMS). With the top researchers in the world assessing the state-of-the-art within the various elements of three-dimensional materials science, this collection provides the premier forum for authoritative presentations on all aspects of the science, including characterization, visualization, quantitative analysis, modeling, and investigation of structure-property relationships of materials.

Download or read book Towards Efficient Designing of Safe Nanomaterials written by Tomasz Puzyn and published by Royal Society of Chemistry. This book was released on 2012 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first to provide a comprehensive review of recent progress and challenges in the risk assessment of nanomaterials by empirical and computational techniques.