Download or read book Numerical Methods for Two phase Incompressible Flows written by Sven Gross and published by Springer Science & Business Media. This book was released on 2011-04-26 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first monograph providing an introduction to and an overview of numerical methods for the simulation of two-phase incompressible flows. The Navier-Stokes equations describing the fluid dynamics are examined in combination with models for mass and surfactant transport. The book pursues a comprehensive approach: important modeling issues are treated, appropriate weak formulations are derived, level set and finite element discretization techniques are analyzed, efficient iterative solvers are investigated, implementational aspects are considered and the results of numerical experiments are presented. The book is aimed at M Sc and PhD students and other researchers in the fields of Numerical Analysis and Computational Engineering Science interested in the numerical treatment of two-phase incompressible flows.
Download or read book Computational Methods for Multiphase Flows in Porous Media written by Zhangxin Chen and published by SIAM. This book was released on 2006-04-01 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a fundamental and practical introduction to the use of computational methods. A thorough discussion of practical aspects of the subject is presented in a consistent manner, and the level of treatment is rigorous without being unnecessarily abstract. Each chapter ends with bibliographic information and exercises.
Download or read book Computational Methods For Two phase Flow And Particle Transport With Cd rom written by Wen Ho Lee and published by World Scientific Publishing Company. This book was released on 2013-03-22 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes mathematical formulations and computational methods for solving two-phase flow problems with a computer code that calculates thermal hydraulic problems related to light water and fast breeder reactors. The physical model also handles the particle and gas flow problems that arise from coal gasification and fluidized beds. The second part of this book deals with the computational methods for particle transport.
Download or read book Finite Volumes for Complex Applications IX Methods Theoretical Aspects Examples written by Robert Klöfkorn and published by Springer Nature. This book was released on 2020-06-09 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the 9th conference on "Finite Volumes for Complex Applications" (Bergen, June 2020) are structured in two volumes. The first volume collects the focused invited papers, as well as the reviewed contributions from internationally leading researchers in the field of analysis of finite volume and related methods. Topics covered include convergence and stability analysis, as well as investigations of these methods from the point of view of compatibility with physical principles. Altogether, a rather comprehensive overview is given on the state of the art in the field. The properties of the methods considered in the conference give them distinguished advantages for a number of applications. These include fluid dynamics, magnetohydrodynamics, structural analysis, nuclear physics, semiconductor theory, carbon capture utilization and storage, geothermal energy and further topics. The second volume covers reviewed contributions reporting successful applications of finite volume and related methods in these fields. The finite volume method in its various forms is a space discretization technique for partial differential equations based on the fundamental physical principle of conservation. Many finite volume methods preserve further qualitative or asymptotic properties, including maximum principles, dissipativity, monotone decay of free energy, and asymptotic stability, making the finite volume methods compatible discretization methods, which preserve qualitative properties of continuous problems at the discrete level. This structural approach to the discretization of partial differential equations becomes particularly important for multiphysics and multiscale applications. The book is a valuable resource for researchers, PhD and master’s level students in numerical analysis, scientific computing and related fields such as partial differential equations, as well as engineers working in numerical modeling and simulations.
Download or read book Computational Methods in Multiphase Flow VI written by Andrea Alberto Mammoli and published by WIT Press. This book was released on 2011 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase flows, which can involve compressible or incompressible linear or nonlinear, fluids, Are found in all areas of technology, at all length scales and flow regimes. In spite of their ubiquitousness, however multiphase flow continues to be one of the most challenging areas of computational mechanics and experimental methods, with numerous problems remaining unsolved to date. Because the multiphase flow problems are so complex, advanced computational and experimental methods are often required to solve the equations that describe them. The many hhallenges include modelling nonlinear fluids, modelling and tracking interfaces, dealing with multiple length scales, characterizing phase structures, and treating drop breakup and coalescence. Models must be validated, which requires the use of expensive and difficult experimental techniquess. This book presents contributions on the latest research in these techniques, presented at the sixth in a biennial series of conferences on the subject that begain in 2001. Featured topics include: Bubble and drop dynamics, Flow in porous media, Turbulent flow, Multiphase flow simulation, Image processing, Heat transfer, Interaction of gases, liquids and solids, Interface behaviour, Small scale phenomena, Atomization processes, and Liquid film behaviour.
Download or read book Fundamentals of Numerical Reservoir Simulation written by D.W. Peaceman and published by Elsevier. This book was released on 2000-04-01 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of numerical reservoir simulation with high-speed electronic computers has gained wide acceptance throughout the petroleum industry for making engineering studies of a wide variety of oil and gas reservoirs throughout the world. These reservoir simulators have been designed for use by reservoir engineers who possess little or no background in the numerical mathematics upon which they are based. In spite of the efforts to improve numerical methods to make reservoir simulators as reliable, efficient, and automatic as possible, the user of a simulator is faced with a myriad of decisions that have nothing to do with the problem to be solved. This book combines a review of some basic reservoir mechanics with the derivation of the differential equations that reservoir simulators are designed to solve.
Download or read book Multiphase Microfluidics The Diffuse Interface Model written by Roberto Mauri and published by Springer Science & Business Media. This book was released on 2012-05-31 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diffuse interface (D.I.) model for muliphase flows.- Phase separation of viscous ternary liquid mixtures.- Dewetting and decomposing films of simple and complex liquids.- Phase-field models. Multiphase flows are typically described assuming that the different phases are separated by a sharp interface, with appropriate boundary conditions. This approach breaks down whenever the lengthscale of the phenomenon that is being studied is comparable with the real interface thickness, as it happens, for example, in the coalescence and breakup of bubbles and drops, the wetting and dewetting of solid surfaces and, in general, im micro-devices. The diffuse interface model resolves these problems by assuming that all quantities can vary continuously, so that interfaces have a non-zero thickness, i.e. they are "diffuse". The contributions in this book review the theory and describe some relevant applications of the diffuse interface model for one-component, two-phase fluids and for liquid binary mixtures, to model multiphase flows in confined geometries.
Download or read book Computational Methods in Multiphase Flow VIII written by P. Vorobieff and published by WIT Press. This book was released on 2015-04-20 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest research in one of the most challenging, yet most universally applicable areas of technology. Multiphase flows are found in all areas of technology, at all length scales and flow regimes, involving compressible or incompressible linear or nonlinear fluids. The range of related problems of interest is vast, including astrophysics, biology, geophysics, atmospheric process, and many areas of engineering. The solution of the equations that describe such complex problems often requires a combination of advanced computational and experimental methods. For example, any models developed must be validated through the application of expensive and difficult experimental techniques. Numerous problems in the area thus remain as yet unsolved, including modelling nonlinear fluids, modelling and tracking interfaces, dealing with multiple length scales, characterising phase structures, and treating drop break-up and coalescence. The papers contained in the book were presented at the eighth in a well established series of biennial conferences that began in 2001. They represent close interaction between numerical modellers and other researchers working to gradually resolve the many outstanding issues in understanding of multiphase flow. The papers in the book cover such topics as: Multiphase Flow Simulation; Bubble and Drop Dynamics; Interface Behaviour; Experimental Measurements; Energy Applications; Compressible Flows; Flow in Porous Media; Turbulent Flow; Image Processing; Heat Transfer; Atomization; Hydromagnetics; Plasma; Fluidised Beds; Cavitation.
Download or read book Numerical Methods for Hyperbolic Equations written by Elena Vázquez-Cendón and published by CRC Press. This book was released on 2012-11-05 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods for Hyperbolic Equations is a collection of 49 articles presented at the International Conference on Numerical Methods for Hyperbolic Equations: Theory and Applications (Santiago de Compostela, Spain, 4-8 July 2011). The conference was organized to honour Professor Eleuterio Toro in the month of his 65th birthday. The topics cover
Download or read book Godunov Methods written by E.F. Toro and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited review book on Godunov methods contains 97 articles, all of which were presented at the international conference on Godunov Methods: Theory and Applications, held at Oxford in October 1999, to commemo rate the 70th birthday of the Russian mathematician Sergei K. Godunov. The meeting enjoyed the participation of 140 scientists from 20 countries; one of the participants commented: everyone is here, meaning that virtu ally everybody who had made a significant contribution to the general area of numerical methods for hyperbolic conservation laws, along the lines first proposed by Godunov in the fifties, was present at the meeting. Sadly, there were important absentees, who due to personal circumstance could not at tend this very exciting gathering. The central theme o{ the meeting, and of this book, was numerical methods for hyperbolic conservation laws fol lowing Godunov's key ideas contained in his celebrated paper of 1959. But Godunov's contributions to science are not restricted to Godunov's method.
Download or read book Gasdynamic Aspects of Two Phase Flow written by Herbert Staedtke and published by John Wiley & Sons. This book was released on 2006-10-06 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here, the author, a researcher of outstanding experience in this field, summarizes and combines the recent results and findings on advanced two-phase flow modeling and numerical methods otherwise dispersed in various journals, while also providing explanations for numerical and modeling techniques previously not covered by other books. The resulting systematic and comprehensive monograph is unrivalled in its kind, serving as a reference for both researchers and engineers working in engineering as well as in environmental science.
Download or read book Computational Methods for Polymers written by Masoud Soroush and published by MDPI. This book was released on 2020-12-10 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in computational methods for polymers. It covers multiscale modeling of polymers, polymerization reactions, and polymerization processes as well as control, monitoring, and estimation methods applied to polymerization processes. It presents theoretical insights gained from multiscale modeling validated with exprimental measurements. The book consolidates new computational tools and methods developed by academic researchers in this area and presents them systematically. The book is useful for graduate students, researchers, and process engineers and managers.
Download or read book Computational Methods for Multiphase Flow written by Andrea Prosperetti and published by Cambridge University Press. This book was released on 2009-06-25 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thanks to high-speed computers and advanced algorithms, the important field of modelling multiphase flows is an area of rapid growth. This one-stop account – now in paperback, with corrections from the first printing – is the ideal way to get to grips with this topic, which has significant applications in industry and nature. Each chapter is written by an acknowledged expert and includes extensive references to current research. All of the chapters are essentially independent and so the book can be used for a range of advanced courses and the self-study of specific topics. No other book covers so many topics related to multiphase flow, and it will therefore be warmly welcomed by researchers and graduate students of the subject across engineering, physics, and applied mathematics.
Download or read book Runge Kutta Discontinuous Galerkin Methods for Convection dominated Problems written by Bernardo Cockburn and published by . This book was released on 2000 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling Approaches and Computational Methods for Particle laden Turbulent Flows written by Shankar Subramaniam and published by Academic Press. This book was released on 2022-10-20 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling Approaches and Computational Methods for Particle-laden Turbulent Flows introduces the principal phenomena observed in applications where turbulence in particle-laden flow is encountered while also analyzing the main methods for analyzing numerically. The book takes a practical approach, providing advice on how to select and apply the correct model or tool by drawing on the latest research. Sections provide scales of particle-laden turbulence and the principal analytical frameworks and computational approaches used to simulate particles in turbulent flow. Each chapter opens with a section on fundamental concepts and theory before describing the applications of the modelling approach or numerical method. Featuring explanations of key concepts, definitions, and fundamental physics and equations, as well as recent research advances and detailed simulation methods, this book is the ideal starting point for students new to this subject, as well as an essential reference for experienced researchers. - Provides a comprehensive introduction to the phenomena of particle laden turbulent flow - Explains a wide range of numerical methods, including Eulerian-Eulerian, Eulerian-Lagrange, and volume-filtered computation - Describes a wide range of innovative applications of these models
Download or read book The Finite Volume Method in Computational Fluid Dynamics written by F. Moukalled and published by Springer. This book was released on 2015-08-13 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explores both the theoretical foundation of the Finite Volume Method (FVM) and its applications in Computational Fluid Dynamics (CFD). Readers will discover a thorough explanation of the FVM numerics and algorithms used for the simulation of incompressible and compressible fluid flows, along with a detailed examination of the components needed for the development of a collocated unstructured pressure-based CFD solver. Two particular CFD codes are explored. The first is uFVM, a three-dimensional unstructured pressure-based finite volume academic CFD code, implemented within Matlab. The second is OpenFOAM®, an open source framework used in the development of a range of CFD programs for the simulation of industrial scale flow problems. With over 220 figures, numerous examples and more than one hundred exercise on FVM numerics, programming, and applications, this textbook is suitable for use in an introductory course on the FVM, in an advanced course on numerics, and as a reference for CFD programmers and researchers.
Download or read book Computational Methods for Fluid Dynamics written by Joel H Ferziger and published by . This book was released on 1996-02-14 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
