Download or read book Computational Methods and Experiments in Materials Characterization III written by C. A. Brebbia and published by WIT Press. This book was released on 2007 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently, engineering materials could be characterized successfully using relatively simple testing procedures. As materials technology advances, interest is growing in materials possessing complex meso-, micro- and nano-structures, which to a large extent determine their physical properties and behaviour. The purposes of materials modelling are many: optimization, investigation of failure, simulation of production processes, to name but a few. Modelling and characterisation are closely intertwined, increasingly so as the complexity of the material increases. Characterisation, in essence, is the connection between the abstract material model and the real-world behaviour of the material in question. Characterisation of complex materials therefore may require a combination of experimental techniques and computation. This book publishes papers presented at the Third International Conference on Computational Methods and Experiments in Material Characterisation.Topics covered include: Composites; Ceramics; Alloys; Cements and Cement Based Materials; Biomaterials; Thin Films and Coatings; Advanced Materials; Imaging Analysis; Thermal Analysis; New Methods; Surface Chemistry, Nano Indentation; Continuum Methods; Particle Models; Damage Mechanics; Innovative Techniques; Stochastic Methods.

Download or read book Computational Methods and Experiments in Materials Characterization II written by C. A. Brebbia and published by WIT Press. This book was released on 2005 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the work of practitioners in many fields of engineering, materials and computational science, this book includes most of the papers presented at the Second International Conference on Material Characterisation. Compiled with the central aim of encouraging interaction between experimentalists and modelers, the contributions featured are divided under the following sections: MICROSTRUCTURES ? Composites; Alloys; Ceramics; Cements; Foams; Suspensions; Biomaterials; Thin Films; Coatings. EXPERIMENTAL METHODS - Optical Imaging; SEM, TEM; X-Ray Microtomography; Ultrasonic Techniques; NMR/MRI; Micro/Nano Indentation; Thermal Analysis; Surface Chemistry. COMPUTATIONAL METHODS - Continuum Methods (FEM, FV, BEM); Particle Models (MD, DPD, Lattice-Boltzmann); Montecarlo Methods; Cellular Automata; Hybrid Multiscale Methods; and Damage Mechanics.

Download or read book Computational Methods and Experiments in Materials Characterization II written by C. A. Brebbia and published by WIT Press. This book was released on 2005 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the work of practitioners in many fields of engineering, materials and computational science, this book includes most of the papers presented at the Second International Conference on Material Characterisation. Compiled with the central aim of encouraging interaction between experimentalists and modelers, the contributions featured are divided under the following sections: MICROSTRUCTURES ? Composites; Alloys; Ceramics; Cements; Foams; Suspensions; Biomaterials; Thin Films; Coatings. EXPERIMENTAL METHODS - Optical Imaging; SEM, TEM; X-Ray Microtomography; Ultrasonic Techniques; NMR/MRI; Micro/Nano Indentation; Thermal Analysis; Surface Chemistry. COMPUTATIONAL METHODS - Continuum Methods (FEM, FV, BEM); Particle Models (MD, DPD, Lattice-Boltzmann); Montecarlo Methods; Cellular Automata; Hybrid Multiscale Methods; and Damage Mechanics.

Download or read book Materials Characterisation VI written by C. A. Brebbia and published by WIT Press. This book was released on 2013 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers to be presented at the Sixth International Conference on the topic. Materials modelling and characterisation have become ever more closely intertwined. Characterisation, in essence, connects the abstract material model with the real-world behaviour of the material in question. Characterisation of complex materials often requires a combination of experimental and computational techniques. The conference is convened biennially to facilitate the sharing of recent work between researchers who use computational methods, those who perform experiments, and those who do both, in all areas of materials characterisation.The papers cover such topics as: Computational models and experiments; Mechanical characterisation and testing; Micro and macro materials characterisation; Corrosion problems; Innovative experimental technologies; Recycled materials; Thermal analysis; Advances in composites; Cementitious materials; Structural health monitoring; Energy materials.

Download or read book Materials Characterisation VI written by Andrea Alberto Mammoli and published by . This book was released on 2013-06-01 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers to be presented at the Sixth International Conference on the topic. Materials modelling and characterisation have become ever more closely intertwined. Characterisation, in essence, connects the abstract material model with the real-world behaviour of the material in question. Characterisation of complex materials often requires a combination of experimental and computational techniques. The conference is convened biennially to facilitate the sharing of recent work between researchers who use computational methods, those who perform experiments, and those who do both, in all areas of materials characterisation.

Download or read book Materials Characterisation Five written by Andrea Alberto Mammoli and published by WIT Press. This book was released on 2011 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently, engineering materials could be characterized successfully using relatively simple testing procedures. However, advanced materials technology has led to the development of materials with complex meso-, micro- and nano-structures that can no longer be characterised with simple testing procedures. Materials modelling and characterisation have become ever more closely intertwined. Characterisation, in essence, connects the abstract material model with the real-world behaviour of the material in question. Characterisation of complex materials often requires a combination of experimental and computational techniques. This book contains papers to be presented at the Fifth International Conference, convened to facilitate the sharing of recent work between researchers who use computational methods, those who perform experiments, and those who do both, in all areas of materials characterisation. The papers cover such topics as: Advances in composites; Thermal analysis; Nano-materials; Damage mechanics; Computational models and experiments; Mechanical characterisation and testing; Nano-composites; Energy materials; Chemo-mechanical problems; Innovative experiments; Recycled materials; and Corrosion problems.

Download or read book Materials Characterisation IV written by Andrea Alberto Mammoli and published by WIT Press. This book was released on 2009 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently, engineering materials could be characterised successfully using relatively simple testing procedures. As materials technology advances, interest is growing in materials possessing complex meso-, micro- and nano-structures, which to a large extent determine their physical properties and behaviour. The purposes of materials modelling are many - optimisation, investigation of failure, simulation of production processes, to name a few. Modelling and characterisation are closely intertwined, increasingly so as the complexity of the material increases. Characterisation, in essence, is the connection between the abstract material model and the real-world behaviour of the material in question. Characterisation of complex materials therefore may require a combination of experimental techniques and computation. This book contains papers from the Fourth International Conference on Computational Methods and Experiments in Materials Characterisation which brought researchers who use computational methods, those who perform experiments, and of course those who do both, in all areas of materials characterisation, to discuss their recent results and ideas, in order to foster the multidisciplinary approach that has become necessary for the study of complex phenomena.

Download or read book Computational Methods in Materials Characterisation written by Andrea Alberto Mammoli and published by Witpress. This book was released on 2004 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conference held 5-7 Nov. 2003; organized by Wessex Institute of Technology, UK and University of New Mexico, USA.

Download or read book Computational Methods and Experimental Measurements XX written by S. Hernández and published by WIT Press. This book was released on 2021-07-26 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Formed of papers presented at the 20th International Conference on Computational Methods and Experimental Measurements, this volume provides a view of the latest work on the interaction between computational methods and experiments. The continuous improvement in computer efficiency, coupled with diminishing costs and the rapid development of numerical procedures have generated an ever-increasing expansion of computational simulations that permeate all fields of science and technology. As these procedures continue to grow in magnitude and complexity, it is essential to validate their results to be certain of their reliability. This can be achieved by performing dedicated and accurate experiments, which have undergone constant and enormous development. At the same time, current experimental techniques have become more complex and sophisticated so that they require the intensive use of computers, both for running experiments as well as acquiring and processing the resulting data. Some of the subject areas covered are Fluid flow studies and experiments; Structural and stress analysis; Materials characterization; Electromagnetic problems; Structural integrity; Destructive and non-destructive testing; Heat transfer and thermal processes; Advances in computational methods; Automotive applications; Aerospace applications; Ocean engineering and marine structures; Fluid-structure interaction; Bio-electromagnetics; Process simulations; Environmental monitoring, modelling and applications; Validation of computer modelling; Data and signal processing; Virtual testing and verification; Electromagnetic compatibility; Life cycle assessment.

Download or read book Computational Methods and Experimental Measurements XVI written by G. M. Carlomagno and published by WIT Press. This book was released on 2013-07-02 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the results of the sixteenth in a biennial series of meetings organised by the Wessex Institute of Technology to facilitate that communication between scientists who perform experiments, researchers who develop computer codes, and those who carry out measurements on prototypes. The conference was first held in 1984. While computer models are now more reliable and better able to represent more realistic problems, experimental measurements need to be conditioned to the requirements of the computational models. Progress of engineering sciences depends on the orderly and progressive concurrent development of all three fields.The papers contained in the book cover such topics as: Computational and experimental methods; Computer interaction and control of experiments; Fluid flow; Structural and stress analysis; Computer methods; Materials characterization; Heat transfer and thermal processes; Data acquisition and signal processing; Advances in measurements and data acquisition; Multiscale modelling; Industrial applications.

Download or read book Computational Methods and Experimental Measurements XVII written by G.M. Carlomagno and published by WIT Press. This book was released on 2015-05-05 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing papers presented at the seventeenth in a series of biennial meetings organised by the Wessex Institute and first held in 1984, this book includes the latest research from scientists who perform experiments, researchers who develop computer codes, and those who carry out measurements on prototypes and whose work may interact. Progress in the engineering sciences is dependent on the orderly and concurrent development of all three fields. Continuous improvement in computer efficiency, coupled with diminishing costs and rapid development of numerical procedures have generated an ever-increasing expansion of computational simulations that permeate all fields of science and technology. As these procedures continue to grow in magnitude and complexity, it is essential to be certain of their reliability, i.e. to validate their results. This can be achieved by performing dedicated and accurate experiments. At the same time, current experimental techniques have become more complex and sophisticated so that they require the exploitation of computers, both for running experiments as well as acquiring and processing the resulting data. The papers contained in the book address advances in the interaction between these three areas. They cover such topics as: Computational and Experimental Methods; Fluid Flow; Structural and Stress Analysis; Materials Characterisation; Heat Transfer and Thermal Processes; Advances in Computational Methods; Automotive Applications; Applications in Industry; Process Simulations; Environmental Modelling and Applications; Computer Modelling; Validation of Computer Modelling; Computation in Measurements; Data Processing of Experiments; Virtual Testing and Verification; Simulation and Forecasting; Measurements in Engineering.

Download or read book Computational Methods for Microstructure Property Relationships written by Somnath Ghosh and published by Springer Science & Business Media. This book was released on 2010-11-17 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Methods for Microstructure-Property Relationships introduces state-of-the-art advances in computational modeling approaches for materials structure-property relations. Written with an approach that recognizes the necessity of the engineering computational mechanics framework, this volume provides balanced treatment of heterogeneous materials structures within the microstructural and component scales. Encompassing both computational mechanics and computational materials science disciplines, this volume offers an analysis of the current techniques and selected topics important to industry researchers, such as deformation, creep and fatigue of primarily metallic materials. Researchers, engineers and professionals involved with predicting performance and failure of materials will find Computational Methods for Microstructure-Property Relationships a valuable reference.

Download or read book Materials and Contact Characterisation X written by S. Hernández and published by WIT Press. This book was released on 2021-09-01 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the aim to facilitate the dissemination of research from both academia and the industrial community, presented works from the 10th International Conference on Computational Methods and Experiments in Material and Contact Characterisation are included in this book. These papers discuss the latest developments in this rapidly advancing field. The demand for high-quality production for both industry and consumers has led to rapid developments in materials science and engineering. This requires the characterisation of the properties of the materials. Of particular interest to industry and society are the knowledge of the surface treatment and contact mechanics of these materials to determine the in-service behaviour of components subject to contact conditions. Modern society requires systems that operate at conditions that use resources effectively. In terms of components durability, the understanding of surface engineering wear frictional and lubrication dynamics has never been so important. Current research is focused on modifications technologies that can increase the surface durability of materials. The characteristics of the system reveal which surface engineering methods should be chosen and as a consequence, it is essential to study the combination of surface treatment and contact mechanics. Combinations of different experimental techniques as well as computer simulation methods are essential to achieve a proper analysis. A very wide range of materials, starting with metals through polymers and semiconductors to composites, necessitates a whole spectrum of characteristic experimental techniques and research methods. Topics covered include: Experimental and measurement techniques; Mechanical testing and characterisation; Composites; Characterisation at multiple scales; Corrosion and erosion; Damage, fatigue and fracture; Recycled and reclaimed materials; Emerging materials and processing technology; Materials for energy systems; Contact mechanics; Coatings and surface treatments; Tribology and design; Biomechanical characterisation and applications; Residual stresses; Polymers and plastics; Computational methods and simulation; Biological materials; Evaluation and material processing.

Download or read book Computational and Experimental Analysis of Functional Materials written by Oleksandr V. Reshetnyak and published by CRC Press. This book was released on 2017-03-27 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book looks at the synthesis of polyaniline by different methods, under different conditions, for various applications, and presents studies of its properties by a wide range of the modern physic-chemical methods. The book provides a comprehensive analysis of experimental results from the point of view of the correlations in the triad synthesis conditions–structurephysico–chemical properties. It combines the results of experimental investigations and original methodology of the description of physical–chemical and electrochemical phenomena at interface surfaces, showing an influence of such phenomena on the applied aspects of the polyaniline and nanocomposites on its basis applications.

Download or read book Materials Characterisation written by D.O. Northwood and published by WIT Press. This book was released on 2018-03-27 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing selected papers on Materials Characterisation this volume presents the latest research in the field. Material and contact characterisation is a rapidly advancing field that requires the application of a combination of numerical and experimental methods. Contributions come from both industry and research communities using computational methods and performing experiments. Demand for high quality production from both industry and consumers has led to rapid developments in materials science and engineering. Current research is focussed on modification technologies that can increase the surface durability of materials. The characteristics of the system reveal which surface engineering methods should be chosen and as a consequence it is essential to study the combination of surface treatment and contact mechanics. The accurate characterisation of the physical and chemical properties of materials requires the application of both experimental techniques and computer simulation methods in order to gain a correct analysis. A very wide range of materials, starting with metals through polymers and semiconductors to composites, necessitates a whole spectrum of characteristic experimental techniques and research methods. The papers in this book examine various combinations of techniques across various topics.

Download or read book Synthesis Modelling and Characterization of 2D Materials and their Heterostructures written by Eui-Hyeok Yang and published by Elsevier. This book was released on 2020-06-19 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis, Modelling and Characterization of 2D Materials and Their Heterostructures provides a detailed discussion on the multiscale computational approach surrounding atomic, molecular and atomic-informed continuum models. In addition to a detailed theoretical description, this book provides example problems, sample code/script, and a discussion on how theoretical analysis provides insight into optimal experimental design. Furthermore, the book addresses the growth mechanism of these 2D materials, the formation of defects, and different lattice mismatch and interlayer interactions. Sections cover direct band gap, Raman scattering, extraordinary strong light matter interaction, layer dependent photoluminescence, and other physical properties. Explains multiscale computational techniques, from atomic to continuum scale, covering different time and length scales Provides fundamental theoretical insights, example problems, sample code and exercise problems Outlines major characterization and synthesis methods for different types of 2D materials

Download or read book Processing and Characterization of Materials written by Snehanshu Pal and published by Springer Nature. This book was released on 2021-09-01 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes selected conference proceedings of Conference on Processing and Characterization of Materials (CPCM-2020). The content of the book includes processing of and characterization of materials, sustainable energy materials, defense materials, functionally graded materials, and composites which has significant impact on cutting-edge applications. The book also includes surface engineering, computational methods and materials, waste utilization, and corrosion and environmental degradation of materials. Design, research, and development studies, experimental investigations, theoretical analysis, and fabrication techniques relevant to the application of materials in various assemblies, ranging from individual components to complete structure are presented in the book. The book is useful for graduate students, researchers, and industry professionals alike.