Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Life Prediction Methodology for Mechanical Systems Using Dynamic Simulation Finite Element Analysis and Fatigue Life Prediction Methods written by Woon Kyung Baek and published by . This book was released on 1990 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biaxial Multiaxial Fatigue and Fracture written by Andrea Carpinteri and published by Elsevier. This book was released on 2003-03-19 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Structural Integrity Society (ESIS) Technical Commitee on Fatigue of Engineering Materials and Structures (TC3) decided to compile a Special Technical Publication (ESIS STP) based on the 115 papers presented at the 6th International Conference on Biaxial/Multiaxial Fatigue and Fracture. The 25 papers included in the STP have been extended and revised by the authors. The conference was held in Lisbon, Portugal, on 25-28 June 2001, and was chaired by Manual De Freitas, Instituto Superior Tecnico, Lisbon. The meeting, organised by the Instituto Superior Tecnico and sponsored by the Portuguese Minesterio da Cienca e da Tecnologia and by the European Structural Integrity Society, was attended by 151 delegates from 20 countries. The papers in the present book deal with the theoretical, numerical and experimental aspects of the Multiaxial fatigue and fracture of engineering materials and structures. They are divided in to the following six sections; Multiaxial Fatigue of Welded Structures; High cycle Multiaxial fatigue; Non proportional and Variable-Amplitude loading; Defects, Notches, Crack Growth; Low Cycle Multiaxial Fatigue; Applications and Testing Methods. As is well-known, most engineering components and structures in the mechanical, aerospace, power generation, and other industries are subjected to multiaxial loading during their service life. One of the most difficult tasks in design against fatigue and fracture is to translate the information gathered from uniaxial fatigue and fracture tests on engineering materials into applications involving complex states of cyclic stress-strain conditions. This book is the result of co-operation between many researchers from different laboratories, universities and industries in a number of countries.
Download or read book Concurrent Engineering Tools and Technologies for Mechanical System Design written by Edward J. Haug and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain lectures presented at the NATO Advanced Study Institute on Concurrent Engineering Tools and Technologies for Mechanical System Design held in Iowa City, Iowa, 25 May -5 June, 1992. Lectures were presented by leaders from Europe and North America in disciplines contributing to the emerging international focus on Concurrent Engineering of mechanical systems. Participants in the Institute were specialists from throughout NATO in disciplines constituting Concurrent Engineering, many of whom presented contributed papers during the Institute and all of whom participated actively in discussions on technical aspects of the subject. The proceedings are organized into the following five parts: Part 1 Basic Concepts and Methods Part 2 Application Sectors Part 3 Manufacturing Part 4 Design Sensitivity Analysis and Optimization Part 5 Virtual Prototyping and Human Factors Each of the parts is comprised of papers that present state-of-the-art concepts and methods in fields contributing to Concurrent Engineering of mechanical systems. The lead-off papers in each part are based on invited lectures, followed by papers based on contributed presentations made by participants in the Institute.
Download or read book Advances in Fracture Research written by B.L. Karihaloo and published by Elsevier. This book was released on 2012-12-02 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture is a major cause of failure in metallic and non-metallic materials and structures. An understanding of the micro- and macro- mechanisms of fracture enables materials scientists to develop materials with high fracture resistance, which in turn helps engineers and designers to ensure the soundness and integrity of structures made from these materials. The International Congress on Fracture is held every four years and is an occasion to take stock of the major achievements in the broad field of fracture, to honour those who have made lasting contributions to this field, and to reflect on the future directions. ICF9 is published in six volumes covering the areas of:-- Failure Analysis, Remaining Life Assessment, Life Extension and Repair- Failure of Multiphase and Non-Metallic Materials- Fatigue of Metallic and Non-Metallic Materials and Structures- Theoretical and Computational Fracture Mechanics and New Directions- Testing and Characterization Methods, and Interfacial Fracture Mechanics- High Strain Rate Fracture and Impact Mechanics.
Download or read book Advances in Fatigue Lifetime Predictive Techniques written by Michael R. Mitchell and published by ASTM International. This book was released on 1992 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty-seven papers from fatigue researchers and practitioners review in detail recent progress in the development of methods to predict fatigue performance of materials and structures and to assess the extent to which these new methods are finding their way into practice. The papers, from the ASTM
Download or read book Structural Sensitivity Analysis and Optimization 1 written by Kyung K. Choi and published by Springer Science & Business Media. This book was released on 2006-12-30 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensive numerical methods for computing design sensitivity are included in the text for practical application and software development. The numerical method allows integration of CAD-FEA-DSA software tools, so that design optimization can be carried out using CAD geometric models instead of FEA models. This capability allows integration of CAD-CAE-CAM so that optimized designs can be manufactured effectively.
Download or read book The Shock and Vibration Digest written by and published by . This book was released on 1991 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Structural Optimization written by J. Herskovits and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Structural Optimization presents the techniques for a wide set of applications, ranging from the problems of size and shape optimization (historically the first to be studied) to topology and material optimization. Structural models are considered that use both discrete and finite elements. Structural materials can be classical or new. Emerging methods are also addressed, such as automatic differentiation, intelligent structures optimization, integration of structural optimization in concurrent engineering environments, and multidisciplinary optimization. For researchers and designers in industries such as aerospace, automotive, mechanical, civil, nuclear, naval and offshore. A reference book for advanced undergraduate or graduate courses on structural optimization and optimum design.
Download or read book Design Analysis Robust Methods and Stress Classification written by W. J. Bees and published by . This book was released on 1993 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Web Information Systems and Technologies written by Massimo Marchiori and published by Springer Nature. This book was released on 2023-08-28 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes revised selected papers from the 18th International Conference on Web Information Systems and Technologies, WEBIST 2022, which took place in Valletta, Malta, in October 2022. The 13 full revised papers presented in this book were carefully reviewed and selected from a total of 62 submissions. The selected papers contribute to the understanding of relevant current research trends in Web information systems and technologies, including deep learning, knowledge representation and reasoning, recommender systems, internet of things, Web intelligence and big data.
Download or read book Symmetry in Engineering Sciences II written by Francisco G. Montoya and published by MDPI. This book was released on 2020-12-16 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a sample of theoretical and practical advances in symmetry in multidisciplinary engineering applications. It covers several applications, such as mechanical analysis of tunnel lining, prediction methods for the ring damper used in gears, calibration methods for manipulators, design methods for wheel configurations of mobile robots, analysis of elastic plastic damaged zones, 3D printed corneal models, analysis of multibody system dynamic networks, structural elements in architecture, railway transportation, transportation of hazardous materials, cable-driven mechanisms, and image processing. The contributions included in this book describe the state-of-the-art advances in this field and demonstrate the possibilities of the study of symmetry in multidisciplinary applications in the field of engineering.
Download or read book Emerging Technologies written by Timothy J. Bennett and published by . This book was released on 1995 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers from a symposium at the November 1995 congress on emerging technologies. Topics include the new engineer/manager as a geospatial technologist; potential changes in the traffic system and future powertrain configurations; the role of computational methods in reengineering the design p
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1988 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book e Design written by Kuang-Hua Chang and published by Academic Press. This book was released on 2016-02-23 with total page 1228 pages. Available in PDF, EPUB and Kindle. Book excerpt: e-Design: Computer-Aided Engineering Design, Revised First Edition is the first book to integrate a discussion of computer design tools throughout the design process. Through the use of this book, the reader will understand basic design principles and all-digital design paradigms, the CAD/CAE/CAM tools available for various design related tasks, how to put an integrated system together to conduct All-Digital Design (ADD), industrial practices in employing ADD, and tools for product development. - Comprehensive coverage of essential elements for understanding and practicing the e-Design paradigm in support of product design, including design method and process, and computer based tools and technology - Part I: Product Design Modeling discusses virtual mockup of the product created in the CAD environment, including not only solid modeling and assembly theories, but also the critical design parameterization that converts the product solid model into parametric representation, enabling the search for better design alternatives - Part II: Product Performance Evaluation focuses on applying CAE technologies and software tools to support evaluation of product performance, including structural analysis, fatigue and fracture, rigid body kinematics and dynamics, and failure probability prediction and reliability analysis - Part III: Product Manufacturing and Cost Estimating introduces CAM technology to support manufacturing simulations and process planning, sheet forming simulation, RP technology and computer numerical control (CNC) machining for fast product prototyping, as well as manufacturing cost estimate that can be incorporated into product cost calculations - Part IV: Design Theory and Methods discusses modern decision-making theory and the application of the theory to engineering design, introduces the mainstream design optimization methods for both single and multi-objectives problems through both batch and interactive design modes, and provides a brief discussion on sensitivity analysis, which is essential for designs using gradient-based approaches - Tutorial lessons and case studies are offered for readers to gain hands-on experiences in practicing e-Design paradigm using two suites of engineering software: Pro/ENGINEER-based, including Pro/MECHANICA Structure, Pro/ENGINEER Mechanism Design, and Pro/MFG; and SolidWorks-based, including SolidWorks Simulation, SolidWorks Motion, and CAMWorks. Available on the companion website http://booksite.elsevier.com/9780123820389
Download or read book American Doctoral Dissertations written by and published by . This book was released on 2000 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Progress in the Analysis and Design of Marine Structures written by Carlos Guedes Soares and published by CRC Press. This book was released on 2017-04-28 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in the Analysis and Design of Marine Structures collects the contributions presented at MARSTRUCT 2017, the 6th International Conference on Marine Structures (Lisbon, Portugal, 8-10 May 2017). The MARSTRUCT series of Conferences started in Glasgow, UK in 2007, the second event of the series having taken place in Lisbon, Portugal in March 2009, the third in Hamburg, Germany in March 2011, the fourth in Espoo, Finland in March 2013, and the fifth in Southampton, UK in March 2015. This Conference series deals with Ship and Offshore Structures, addressing topics in the areas of: - Methods and Tools for Loads and Load Effects - Methods and Tools for Strength Assessment - Experimental Analysis of Structures - Materials and Fabrication of Structures - Methods and Tools for Structural Design and Optimisation, and - Structural Reliability, Safety and Environmental Protection Progress in the Analysis and Design of Marine Structures is essential reading for academics, engineers and all professionals involved in the design of marine and offshore structures.
