Download or read book Compressive Strength of Concrete written by Pavel Krivenko and published by BoD – Books on Demand. This book was released on 2020-03-11 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete made using mineral cements, the raw materials which on earth are practically endless, is known as one of the oldest building materials and during the last decades of the twentieth century has become a dominant building material for general use. At the same time, the requirements of the quality of concrete and its performance properties, in particular compressive strength, durability, economical efficiency, and low negative impact of its manufacture on the environment have not yet been completely met. Bearing these requirements in mind, researchers and engineers worldwide are working on how to satisfy these requirements. This book has been written by researchers and experts in the field and provides the state of the art on recent progress achieved on the properties of concrete, including concrete in which industrial by-products are utilized. The book is dedicated to graduate students, researchers, and practicing engineers in related fields.

Download or read book Compressive Strength of Concrete written by Pavlo Kryvenko and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Creep and Shrinkage written by Hubert Rüsch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on Reinforced Concrete-Prestressed Concrete, Volume 2, Accounting for the Effects of Creep and Shrinkage on the Behavior of Structural Systems by Hubert Rusch and Dieter Jungwirth, which appeared in German in 1976. Even then, it was Hubert Rusch's fervent wish to have his thoughts on the deformations of concrete translated into English in order to reach a wider audience. His earlier efforts to contribute a study to the Series of Monographs of the Ameri can Institute had unfortunately not succeeded. Despite a serious illness, Hubert Rusch undertook, with his characteristic prudence and thoroughness, the preparatory work for the translation and related revision of his book. Unfortunately fate did not grant him the satisfaction of seeing his work completed. Hubert Rusch died on October 17, 1979. In writing this book, Hubert Rusch drew on his many years of devoted study of the creep problem. These investigations go back to 1934. His awareness of the plastic deformation of concrete under sustained load, which had been reported to him on the occasion of an American sojourn, led him to discover the causes of a major building collapse. At his urging, Professor A. Hummel published, in 1935, a critical survey of the test results then available on concrete creep.

Download or read book Effects of Testing Variables on the Measured Compressive Strength of High strength 90 MPa Concrete written by Nicholas J. Carino and published by . This book was released on 1994 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nano and Microstructural Design of Advanced Materials written by M. A. Meyers and published by Elsevier. This book was released on 2003-12-05 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of the nanoscale effects has been recognized in materials research for over fifty years, but it is only recently that advanced characterization and fabrication methods are enabling scientists to build structures atom-by-atom or molecule-by molecule. The understanding and control of the nanostructure has been, to a large extent, made possible by new atomistic analysis and characterization methods pioneered by transmission electron microscopy. Nano and Microstructural Design of Advanced Materials focuses on the effective use of such advanced analysis and characterization techniques in the design of materials. - Teaches effective use of advanced analysis and characterization methods at an atomistic level - Contains many supporting examples of materials in which such design concepts have been successfully applied

Download or read book Design and Control of Concrete Mixtures written by Steven H. Kosmatka and published by . This book was released on 1988 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Portland Cement Association reference, dealing with fundamentals, cold weather concreting, curing, admixtures, aggregates, mixing, and much more.

Download or read book Cement Industry written by Hosam Saleh and published by BoD – Books on Demand. This book was released on 2021-06-09 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cement is the basis of the building and construction industry and of fundamental importance for many civil engineering applications. As such, the cement industry is one of the key industries worldwide necessary for the current and future sustainable development of society. Despite its undisputed importance, the cement industry is one of those industrial branches predominately responsible for high energy consumption and excessive generation of large amounts of carbon dioxide and other contaminants that significantly endanger human health and the environment and contributes to global warming.In this context, nanomaterials, polymeric materials, and natural additives are being used for cement enhancement in various applications. This book examines these novel materials and their optimization, characterization, and sustainable application in the building industry and for stabilizing hazardous waste.

Download or read book Sandy Materials in Civil Engineering written by Saeed Nemati and published by BoD – Books on Demand. This book was released on 2020-07-22 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the world moves further into urbanization, there is a greater need for construction materials to meet society’s needs. As natural resources become scarce, the use of recycled materials for construction purposes has become increasingly common. Over the past decade, there has been a significant increase in the utilization of recycled materials in the construction industry. This will result in substantial advantages in structure and infrastructure construction coupled with a reduction in the construction cost, as well as improving sustainability. However, significant development limitations and many relevant considerations must be addressed when using recycled materials in construction. This book introduces innovative and alternative construction materials used in civil engineering.

Download or read book Regeneration of the Built Environment from a Circular Economy Perspective written by Stefano Della Torre and published by Springer Nature. This book was released on 2019-01-01 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book explores the strategic importance and advantages of adopting multidisciplinary and multiscalar approaches of inquiry and intervention with respect to the built environment, based on principles of sustainability and circular economy strategies. A series of key challenges are considered in depth from a multidisciplinary perspective, spanning engineering, architecture, and regional and urban economics. These challenges include strategies to relaunch socioeconomic development through regenerative processes, the regeneration of urban spaces from the perspective of resilience, the development and deployment of innovative products and processes in the construction sector in order to comply more fully with the principles of sustainability and circularity, and the development of multiscale approaches to enhance the performance of both the existing building stock and new buildings. The book offers a rich selection of conceptual, empirical, methodological, technical, and case study/project-based research. It will be of value for all who have an interest in regeneration of the built environment from a circular economy perspective.

Download or read book Effect of Tannic Acid on the Strength of Concrete written by Duff Andrew Abrams and published by . This book was released on 1920 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Building Construction written by B. C. Punmia and published by . This book was released on 2008-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Spectral Analysis in Engineering written by Grant Hearn and published by Butterworth-Heinemann. This book was released on 1995-08-17 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides a thorough explanation of the underlying principles of spectral analysis and the full range of estimation techniques used in engineering. The applications of these techniques are demonstrated in numerous case studies, illustrating the approach required and the compromises to be made when solving real engineering problems. The principles outlined in these case studies are applicable over the full range of engineering disciplines and all the reader requires is an understanding of elementary calculus and basic statistics. The realistic approach and comprehensive nature of this text will provide undergraduate engineers and physicists of all disciplines with an invaluable introduction to the subject and the detailed case studies will interest the experienced professional. - No more than a knowledge of elementary calculus, and basic statistics and probability is needed - Accessible to undergraduates at any stage of their courses - Easy and clear to follow

Download or read book Strength and Related Properties of Concrete written by Sándor Popovics and published by John Wiley & Sons. This book was released on 1998-03-23 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work discusses the variations that occur in the strength of concrete and presents numerical methods useful in interpreting these variations. Individual chapters include the relationship between composition and strength of concrete.

Download or read book Smart Cement written by Cumaraswamy Vipulanandan and published by CRC Press. This book was released on 2021-07-29 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over three billion metric tons of cement are produced annually worldwide, making concrete the most extensively used construction material. Self-sensing, or smart, cement allows real-time monitoring of performance through the entire service life of a concrete structure, for the detection of changing stresses, contamination, excessive temperature, gas leaks and pre-seismic activity. This is achieved by adding a very small proportion of conductive or semi-conductive fibers, such as carbon fibers to the bulk cement, making it piezoresistive, and enabling changes in the concrete’s electrical resistivity in response to shear stress and strain to be monitored. This state-of-the-art reference work presents experimental results with a realistic theoretical framework, for cement manufactures, concrete technologists and contractors as well as researchers.

Download or read book Metal and Ceramic Based Composites written by S.T. Mileiko and published by Elsevier. This book was released on 1997-12-12 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern scientific and technological fields are frequently of an interdisciplinary nature, and the field of fibrous composites is no exception. Unlike fibre-reinforced plastics, the family of metal- and ceramic-based composites is still quite a new group of materials with a large variety of mechanical and physical properties. Up until now it has been difficult to produce these materials as the necessary technical information has not been well documented.The main purpose of this book is to link together fabrication, structure and properties chains, so as to clarify which structure provides the necessary properties, and how one can attain the correct composite structure. To this end, the book not only contains topics of a purely technical nature, but also a description of the failure mechanics of metal- and ceramic-matrix composites, as this is the key to understanding the structure-properties segment of the chain mentioned.The book is divided into three parts. Part I presents a general view of composites with the accent on metal- and ceramic-matrix composites. It also contains a brief description of modern fibres and composites and can be considered, at least for beginners, as a starting point for further study. Part II looks at the composite microstructures considered to be either optimal or reasonable in resisting a particular loading. Finally Part II describes a variety of mechanical, physical, and chemical potential for organizing these microstructures. Experimental data on technologies, material structures, and material properties are used throughout the book to support theoretical conclusions or to obtain important physical parameters.

Download or read book High Performance Concretes written by Paul Zia and published by . This book was released on 1991 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This state-of-the-art report summarizes the results of an extensive search and review of available literature on the mechanical properties of concrete, with particular reference to high performance concrete for highway applications. Included in the review and discussion are the behavior of plastic concrete as well as the strength and deformation characteristics of hardened concrete. Both short-term and long-term effects are considered. Based on the review of the available information, research needs are identified. It is concluded that much research is needed to develop data on the strength and durability properties of concrete which develops high strength, particularly very early strength.

Download or read book Recent Advances in Multidisciplinary Applied Physics written by Antonio Mendez-Vilas and published by Elsevier. This book was released on 2005-09-28 with total page 999 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1st International Meeting on Applied Physics (APHYS-2003) succeeded in creating a new international forum for applied physics in Europe, with specific interest in the application of techniques, training, and culture of physics to research areas usually associated with other scientific and engineering disciplines.This book contains a selection of peer-reviewed papers presented at APHYS-2003, held in Badajoz (Spain), from 15th to 18th October 2003, which included the following Plenary Lectures:* Nanobiotechnology - Interactions of Cells with Nanofeatured Surfaces and with Nanoparticles* Radiation Protection of Nuclear Workers - Ethical Issues* Chaotic Data Encryption for Optical Communications