Download or read book Fatigue of Materials written by Subra Suresh and published by Cambridge University Press. This book was released on 1998-10-29 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a leading researcher in the field, this revised and updated second edition of a highly successful book provides an authoritative, comprehensive and unified treatment of the mechanics and micromechanisms of fatigue in metals, non-metals and composites. The author discusses the principles of cyclic deformation, crack initiation and crack growth by fatigue, covering both microscopic and continuum aspects. The book begins with discussions of cyclic deformation and fatigue crack initiation in monocrystalline and polycrystalline ductile alloys as well as in brittle and semi-/non-crystalline solids. Total life and damage-tolerant approaches are then introduced in metals, non-metals and composites followed by more advanced topics. The book includes an extensive bibliography and a problem set for each chapter, together with worked-out example problems and case studies. This will be an important reference for anyone studying fracture and fatigue in materials science and engineering, mechanical, civil, nuclear and aerospace engineering, and biomechanics.
Download or read book Strength Failure and Crack Evolution Behavior of Rock Materials Containing Pre existing Fissures written by Sheng-Qi Yang and published by Springer. This book was released on 2015-06-05 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has following unique features that distinguish it from other works from the same area: 1) Investigates the influence of fissure geometry on strength failure and crack evolution behaviour of real rock material; 2) Analyzes the effect of pre-experiment high-temperature treatment on fracture mechanical behaviour of rock material with a single fissure or two parallel fissures; 3) Compares quantitatively simulated results using discrete element modelling and experimental results of fracture mechanical behaviour of rock material with two fissures; 4) Constructs the relationship between crack evolution processes and acoustic emission distribution of pre-fissured rock material under entire deformation; and 5) Discusses the crack evolution mechanism of pre-fissured rock material with respect to different confining pressures. This book can become the reference for technicians in the field of geotechnical engineering, mining engineering and geology engineering. At the same time, this book can be regarded as a good reference for scientific researchers carrying out fissured rock mechanics and correlated specialties.
Download or read book Self Healing Composites written by Guoqiang Li and published by John Wiley & Sons. This book was released on 2014-09-23 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the self-healing of composite structures with shape memory polymer as either matrix or embedded suture is systematically discussed. Self-healing has been well known in biological systems for many years: a typical example is the self-healing of human skin. Whilst a minor wound can be self-closed by blood clotting, a deep and wide cut needs external help by suturing. Inspired by this observation, this book proposes a two-step close-then-heal (CTH) scheme for healing wide-opened cracks in composite structures–by constrained shape recovery first, followed by molecular healing. It is demonstrated that the CTH scheme can heal wide-opened structural cracks repeatedly, efficiently, timely, and molecularly. It is believed that self-healing represents the next-generation technology and will become an engineering reality in the near future. The book consists of both fundamental background and practical skills for implementing the CTH scheme, with additional focus on understanding strain memory versus stress memory and healing efficiency evaluation under various fracture modes. Potential applications to civil engineering structures, including sealant for bridge decks and concrete pavements, and rutting resistant asphalt pavements, are also explored. This book will help readers to understand this emerging field, and to establish a framework for new innovation in this direction. Key features: explores potential applications of shape memory polymers in civil engineering structures, which is believed to be unique within the literature balanced testing and mathematical modeling, useful for both academic researchers and practitioners the self-healing scheme is based on physical change of polymers and is written in an easy to understand style for engineering professionals without a strong background in chemistry
Download or read book Fatigue and Fracture Mechanics written by Walter G. Reuter and published by ASTM International. This book was released on 2002-12-31 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the whole of Asia and the Pacific region, this text provides both an analytic overview and specific data for each of the 60 countries. Introductory chapters cover regional issues, including: a regional review with the year's trends, developments and key events' analysis of the threat of terrorism in the region; the effects of deflation on the economy; the water crisis and its impact on the poor; and the successes and failures of micro-credit in the region.
Download or read book Fatigue of Materials written by S. Suresh and published by Cambridge University Press. This book was released on 1998-10-29 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a leading researcher in the field, this revised and updated second edition of a highly successful book provides an authoritative, comprehensive and unified treatment of the mechanics and micromechanisms of fatigue in metals, non-metals and composites. The author discusses the principles of cyclic deformation, crack initiation and crack growth by fatigue, covering both microscopic and continuum aspects. The book begins with discussions of cyclic deformation and fatigue crack initiation in monocrystalline and polycrystalline ductile alloys as well as in brittle and semi-/non-crystalline solids. Total life and damage-tolerant approaches are then introduced in metals, non-metals and composites followed by more advanced topics. The book includes an extensive bibliography and a problem set for each chapter, together with worked-out example problems and case studies. This will be an important reference for anyone studying fracture and fatigue in materials science and engineering, mechanical, civil, nuclear and aerospace engineering, and biomechanics.
Download or read book Fatigue Crack Growth Thresholds Endurance Limits and Design written by J. C. Newman and published by ASTM International. This book was released on 2000 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Contains 24 papers from the November, 1998 symposium of the same name, sponsored by the ASTM Committee E8 on Fatigue and Fracture, and presented by Newman and Piascik (both of the NASA Langley Research Center). The papers focus on such areas as fatigue-crack growth threshold mechanisms, loading and specimen-type effects, analyses of fatigue-crack-growth-threshold behavior, and applications of threshold concepts and endurance limits to aerospace and structural materials. Annotation copyrighted by Book News, Inc., Portland, OR.
Download or read book ICAF 2011 Structural Integrity Influence of Efficiency and Green Imperatives written by Jerzy Komorowski and published by Springer Science & Business Media. This book was released on 2011-05-06 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 26th Symposium of the International Committee on Aeronautical Fatigue are a widely referenced summary of advances in aeronautical design against fatigue. This is a bi-annual event and the proceedings have been published in book form for over 35 years.
Download or read book Aircraft Sustainment and Repair written by Rhys Jones and published by Butterworth-Heinemann. This book was released on 2017-12-05 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Sustainment and Repair is a one-stop-shop for practitioners and researchers in the field of aircraft sustainment, adhesively bonded aircraft joints, bonded composites repairs, and the application of cold spray to military and civil aircraft. Outlining the state-of-the-art in aircraft sustainment, this book covers the use of quantitative fractography to determine the in-service crack length versus flight hours curve, the effect of intergranular cracking on structural integrity and the structural significance of corrosion. The book additionally illustrates the potential of composite repairs and SPD applications to metallic airframes. - Covers corrosion damage assessment and management in aircraft structures - Includes a key chapter on U.S. developments in the emerging field of supersonic particle deposition (SPD) - Shows how to design and assess the potential benefits of both bonded composite repairs and SPD repairs to metallic aircraft structures to meet the damage tolerance requirements inherent in FAA ac 20-107b and the U.S. Joint Services
Download or read book Mechanical Fatigue of Metals written by José A.F.O. Correia and published by Springer. This book was released on 2019-05-07 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the XIX International Colloquium on Mechanical Fatigue of Metals, held at the Faculty of Engineering of the University of Porto, Portugal, 5-7 September 2018. This International Colloquium facilitated and encouraged the exchange of knowledge and experiences among the different communities involved in both basic and applied research in the field of the fatigue of metals, looking at the problem of fatigue exploring analytical and numerical simulative approaches. Fatigue damage represents one of the most important types of damage to which structural materials are subjected in normal industrial services that can finally result in a sudden and unexpected abrupt fracture. Since metal alloys are still today the most used materials in designing the majority of components and structures able to carry the highest service loads, the study of the different aspects of metals fatigue attracts permanent attention of scientists, engineers and designers.
Download or read book Advanced High Strength Steel And Press Hardening Proceedings Of The 4th International Conference On Advanced High Strength Steel And Press Hardening Ichsu2018 written by Yisheng Zhang and published by World Scientific. This book was released on 2018-12-18 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry requirements for vehicle weight reduction, weight containment, improved part functionality and passenger safety have resulted in the increased use of steel grades with a fully martensitic microstructure. These steel grades are essential to improve the anti-intrusion resistance of automotive body parts and the related passenger safety during car collisions. Standard advanced high strength steel (AHSS) grades are notoriously difficult to be formed by cold stamping; they are characterized by elastic springback, poor stretch flangeability and low hole expansion ratios. Hot stamping has therefore received much attention recently as an alternative technology to produce AHSS automotive parts.In this book, selected articles from the Fourth International Conference on Advanced High Strength Steel and Press Hardening held on August 20-22th, 2018 in Hefei, China, are compiled. It focuses on AHSS for the development of press hardening of high performance sheet metal for lightweight vehicle, advanced digital manufacturing technology, as well as the physical metallurgy principles of the hot stamping process.Aiming at the process design and industrial application for hot stamping of press hardened steel and high strength aluminium alloy sheet, the effect of temperature and strain rate on the formability and mechanical properties of the products is discussed. In addition, more practical cases are provided concerning accurate modelling and multi-physics coupling simulation of the hot stamping process. Furthermore, the influence of tool design on forming process, more precise process control strategies to increase production efficiency, and the improvement of hot stamping equipment by advanced design methods will also be presented.
Download or read book Civil Engineering and Urban Research Volume 1 written by Hazem Samih Mohamed and published by CRC Press. This book was released on 2023-03-28 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: Civil Engineering and Urban Research collects papers resulting from the conference on Civil, Architecture and Urban Engineering (ICCAUE 2022), Xining, China, 24–26 June 2022. The primary goal is to promote research and developmental activities in civil engineering, architecture and urban research. Moreover, it aims to promote scientific information interchange between scholars from the top universities, business associations, research centers and high-tech enterprises working all around the world. The conference conducts in-depth exchanges and discussions on relevant topics such as civil engineering and architecture, aiming to provide an academic and technical communication platform for scholars and engineers engaged in scientific research and engineering practice in the field of urban engineering, civil engineering and architecture design. By sharing the research status of scientific research achievements and cutting-edge technologies, it helps scholars and engineers all over the world comprehend the academic development trend and broaden research ideas. So as to strengthen international academic research, academic topics exchange and discussion, and promote the industrialization cooperation of academic achievements.
Download or read book Non Linear Fracture written by W.G. Knauss and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: From time to time the International Journal of Fracture has presented special matters thought to be of interest to its readers. In previous issues, for example, Dr. H.W. Liu as Guest Editor assembled a series of review papers dealing with fatigue processes and characteristics in metals and non-metals (December 1980 and April 1981). Five years ago Guest Editor W.G. Knauss collected works dealing with dynamic fracture (March and April 1985). Continuing this policy, Dr. W.G. Knauss and Dr. A.J. Rosakis of the California Institute of Technology as Guest Editors have now organized an extensive set of papers concerning the influence of non-linear effects upon the mechanics of the fracture process. This collection is based upon contributions to a relatively small international Symposium on Non Linear Fracture Mechanics held under the auspices of the International Union of Theoretical and Applied Mechanics (IUTAM) and convened at the California Institute of Technology in March 1988. It should be noted that although the description of non-linear fracture inherently encompasses a strong material science component, this aspect is not heavily emphasized in the ensuing papers due to the intentional focus upon mechanics. Volume 42 of the International Journal of Fracture will therefore, in successive issues, deal respectively with topics in (1) Damage, (2) Interfaces and Creep, (3) Time Dependence, and (4) Continuum Plasticity. On behalf of the editors and publishers, I wish to express our appreciation to Dr. Knauss, Dr. Rosakis, and their colleagues for their collective efforts.
Download or read book Rock Mechanics Tools and Techniques written by Michel Aubertin and published by Taylor & Francis US. This book was released on 1996 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue and Fracture of Non metallic Materials and Structures written by Andrea Spagnoli and published by MDPI. This book was released on 2020-06-23 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanics of fracture and fatigue have produced a huge body of research work in relation to applications to metal materials and structures. However, a variety of non-metallic materials (e.g., concrete and cementitious composites, rocks, glass, ceramics, bituminous mixtures, composites, polymers, rubber and soft matter, bones and biological materials, and advanced and multifunctional materials) have received relatively less attention, despite their attractiveness for a large spectrum of applications related to the components and structures of diverse engineering branches, applied sciences and architecture, and to the load-carrying systems of biological organisms. This book covers the broad topic of structural integrity of non-metallic materials, considering the modelling, assessment, and reliability of structural elements of any scale. Original contributions from engineers, mechanical materials scientists, computer scientists, physicists, chemists, and mathematicians are presented, applying both experimental and theoretical approaches.
Download or read book Advanced Materials and Techniques for Structural Monitoring Analysis and Control written by Chun-Xu Qu and published by Frontiers Media SA. This book was released on 2024-06-18 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assessing the service status and maintaining the safety of existing structures are critical to the sustainable operations of various engineering and cross-industry, including civil infrastructures, railways and machinery. Static and dynamic structural characteristics play a key role in the global deterioration assessment of the structural performance, which has enabled structural monitoring and analysis technology to become an active focus in the engineering area. Meanwhile, structural control has been widely used in modern structural engineering. Structural control devices are implemented to enhance deteriorating structures and mitigate natural disasters. Through advanced structural control technology, the structural responses can be controlled. These structural control techniques include passive, active or semi-active reverse forces, which aim to modify structural stiffness, mass and damping with minimal control force. Structural control, monitoring and analysis complement each other, ensuring the safety of the structure to the greatest extent.
Download or read book Fatigue and Fracture Mechanices written by Steven R. Daniewicz and published by ASTM International. This book was released on 2005-09 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Integrity and Durability of Advanced Composites written by Peter Beaumont and published by Woodhead Publishing. This book was released on 2015-05-19 with total page 873 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Integrity and Durability of Advanced Composites: Innovative Modelling Methods and Intelligent Design presents scientific and technological research from leading composite materials scientists and engineers that showcase the fundamental issues and practical problems that affect the development and exploitation of large composite structures. As predicting precisely where cracks may develop in materials under stress is an age old mystery in the design and building of large-scale engineering structures, the burden of testing to provide "fracture safe design" is imperative. Readers will learn to transfer key ideas from research and development to both the design engineer and end-user of composite materials. This comprehensive text provides the information users need to understand deformation and fracture phenomena resulting from impact, fatigue, creep, and stress corrosion cracking and how these phenomena can affect reliability, life expectancy, and the durability of structures. - Presents scientific and technological research from leading composite materials scientists and engineers that showcase fundamental issues and practical problems - Provides the information users need to understand deformation and fracture phenomena resulting from impact, fatigue, creep, and stress corrosion cracking - Enables readers to transfer key ideas from research and development to both the design engineer and end-user of composite materials
