Download or read book Analysis and Design Methods written by Catherine Fairhurst and published by Elsevier. This book was released on 2014-06-28 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Design Methods
Download or read book Comprehensive Rock Engineering Analysis and design methods written by John A. Hudson and published by . This book was released on 1993 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rock Mechanics and Engineering Volume 3 written by Xia-Ting Feng and published by CRC Press. This book was released on 2017-04-21 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis, Modeling & Design is the third volume of the five-volume set Rock Mechanics and Engineering and contains twenty-eight chapters from key experts in the following fields: - Numerical Modeling Methods; - Back Analysis; - Risk Analysis; - Design and Stability Analysis: Overviews; - Design and Stability Analysis: Coupling Process Analysis; - Design and Stability Analysis: Blast Analysis and Design; - Rock Slope Stability Analysis and Design; - Analysis and Design of Tunnels, Caverns and Stopes. The five-volume set “Comprehensive Rock Engineering”, which was published in 1993, has had an important influence on the development of rock mechanics and rock engineering. Significant and extensive advances and achievements in these fields over the last 20 years now justify the publishing of a comparable, new compilation. Rock Mechanics and Engineering represents a highly prestigious, multi-volume work edited by Professor Xia-Ting Feng, with the editorial advice of Professor John A. Hudson. This new compilation offers an extremely wideranging and comprehensive overview of the state-of-the-art in rock mechanics and rock engineering and is composed of peer-reviewed, dedicated contributions by all the key experts worldwide. Key features of this set are that it provides a systematic, global summary of new developments in rock mechanics and rock engineering practices as well as looking ahead to future developments in the fields. Contributors are worldrenowned experts in the fields of rock mechanics and rock engineering, though younger, talented researchers have also been included. The individual volumes cover an extremely wide array of topics grouped under five overarching themes: Principles (Vol. 1), Laboratory and Field Testing (Vol. 2), Analysis, Modelling and Design (Vol. 3), Excavation, Support and Monitoring (Vol. 4) and Surface and Underground Projects (Vol. 5). This multi-volume work sets a new standard for rock mechanics and engineering compendia and will be the go-to resource for all engineering professionals and academics involved in rock mechanics and engineering for years to come.
Download or read book Comprehensive Rock Engineering written by John A. Hudson and published by Pergamon. This book was released on 1993 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers wishing to build structures on or in rock use the relatively new discipline known as rock mechanics. Comprehensive Rock Engineering is an up-to-date comprehensive work of reference containing a compilation of knowledge in one coherent publication. Clearly illustrated throughout, this multi-volume publication covers every aspect of rock mechanics and rock engineering. The work is arranged in five volumes under the themes: Fundamentals; Analysis and Design Methods; Rock Testing and Site Characterization; Excavation, Support and Monitoring; and Surface and Underground Project Case Histories, providing information for rock engineering application.
Download or read book Design Analysis in Rock Mechanics Second Edition written by William G. Pariseau and published by CRC Press. This book was released on 2011-09-29 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive introduction to rock mechanics treats the basics of rock mechanics in a clear and straightforward manner and discusses important design problems in terms of the mechanics of materials. This extended second edition includes an additional chapter on rock bursts and bumps, a part on basic dynamics, and numerous additional examples and exercises throughout the chapters. Developed for a complete class in rock engineering, Design Analysis in Rock Mechanics, Second Edition uniquely combines the design of surface and underground rock excavations and addresses: Rock slope stability in surface excavations, from planar block and wedge slides to rotational and toppling failures Shaft and tunnel stability, ranging from naturally supported openings to analysis and design of artificial support and reinforcement systems Entries and pillars in stratified ground Three-dimensional caverns, with an emphasis on cable bolting and backfill Geometry and forces of chimney caving, combination support, and trough subsidence Rock bursts and bumps in underground excavations, with a focus on dynamic phenomena and on fast and sometimes catastrophic failures The numerous exercises and examples familiarize the reader with solving basic practical problems in rock mechanics through various design analysis techniques and their applications. Supporting the main text, appendices provide supplementary information about rock, joint, and composite properties, rock mass classification schemes, useful formulas, and an extensive literature list. The large selection of problems at the end of each chapter can be used for homework assignments. Explanatory and illustrative in character, this volume is suited for courses in rock mechanics, rock engineering and geological engineering design for undergraduate and first-year graduate students in mining, civil engineering, and applied earth sciences. Moreover, it will form a good introduction to the subject of rock mechanics for earth scientists and engineers from other disciplines.
Download or read book Design Methodology in Rock Engineering written by Z.T. Bieniawski and published by CRC Press. This book was released on 2020-08-13 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive treatment of the subject of design methodology in rock engineering, this book emphasizes that a good designer needs not only knowledge for designing (technical knowledge) but also must have knowledge about designing (an appropriate process to follow). Design methodology is today recognized in most fields as crucial to the success of a new product, process, or construction project. This unique book starts with an appraisal of current trends concerning global design activities and competitiveness and gives an insight into how designers design. The state of the art in engineering design is given with a detailed exposé of all significant design theories and methodologies. It then presents a design methodology specifically for rock engineering and demonstrates its practical use on the basis of important case histories. To preserve the momentum of the design message, design education is also discussed. A separate chapter is devoted to skills development, presenting the designer with an extensive repertoire of widely available tools and concepts. The Appendix lists a compendium of useful design charts for rock engineering, traced after a thorough literature search. A Bibliography concludes the book with an up-to-date list of references.
Download or read book Rock Mechanics and Engineering written by Xia-Ting Feng and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Back Analysis in Rock Engineering written by Shunsuke Sakurai and published by CRC Press. This book was released on 2017-09-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practicing engineers working in the field of design, construction and monitoring of rock structures such as tunnels and slopes with technical information on how to design, how to excavate and how to monitor the structures during their construction. Based on the long-term engineering experiences of the author, field measurements together with back analyses are presented as the most powerful tools in rock engineering practice. One of the purposes of field measurements is to assess the stability of the rock structures during their construction. However, field measurement results are only numbers unless they are quantitatively interpreted, a process in which back analyses play an important role. The author has developed both the concepts of “critical strain” and of the “anisotropic parameter” of rocks, which can make it possible not only to assess the stability of the structures during their construction, but also to verify the validity of design parameters by the back analysis of field measurement results during the constructions. Based on the back analysis results, the design parameters used at a design stage could be modified if necessary. This procedure is called an “Observational method”, a concept that is entirely different from that of other structures such as bridges and buildings. It is noted that in general, technical books written for practicing engineers mainly focus on empirical approaches which are based on engineers’ experiences. In this book, however, no empirical approaches will be described, instead, all the approaches are based on simple rock mechanics theory. This book is the first to describe an observational method in rock engineering practice, which implies that the potential readers of this book must be practicing engineers working on rock engineering projects.
Download or read book Rock Engineering Design written by Xia-Ting Feng and published by CRC Press. This book was released on 2011-07-27 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the recent advances in site investigation techniques, computing, access to information and monitoring, plus the current emphasis on safety, accountability and sustainability, this book introduces an up-to-date methodology for the design of all types of rock engineering projects, whether surface or underground. Guidance is provided on the nature of the modeling to support design and the information required for design; also included is a procedure for technical auditing of the modeling and design together with the related protocol sheets. Written by two eminent authors, clearly structured and containing many illustrations, this volume is intended for consulting engineers, contractors, researchers, lecturers and students working on rock engineering projects.
Download or read book Design Analysis in Rock Mechanics written by William G. Pariseau and published by CRC Press. This book was released on 2006-10-26 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a straightforward manner and with plenty of illustrations, this textbook approaches important design issues in rock mechanics from a mechanics of materials foundation. It addresses rock slope stability in surface excavations, shaft and tunnel stability, and entries and pillars. The book also covers three-dimensional caverns with an emphasis of b
Download or read book Rock Mechanics and Engineering written by Xia-Ting Feng and published by . This book was released on 2017 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rock Characterisation Modelling and Engineering Design Methods written by Xia-Ting Feng and published by CRC Press. This book was released on 2013-05-17 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Characterisation, Modelling and Engineering Design Methods contains the contributions presented at the 3rd ISRM SINOROCK Symposium (Shanghai, China, 1820 June 2013). The papers contribute to the further development of the overall rock engineering design process through the sequential linkage of the three themes of rock characterisation, model
Download or read book Rock Mechanics and Engineering Volume 4 written by Xia-Ting Feng and published by CRC Press. This book was released on 2017-05-18 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excavation, Support and Monitoring is the fourth volume of the five-volume set Rock Mechanics and Engineering and contains twenty-three chapters from key experts in the following fields - Excavation Methods; - Support Technology; - Monitoring Technology; - Integrated Engineering Monitoring and Analysis. The five-volume set “Comprehensive Rock Engineering”, which was published in 1993, has had an important influence on the development of rock mechanics and rock engineering. Significant and extensive advances and achievements in these fields over the last 20 years now justify the publishing of a comparable, new compilation. Rock Mechanics and Engineering represents a highly prestigious, multi-volume work edited by Professor Xia-Ting Feng, with the editorial advice of Professor John A. Hudson. This new compilation offers an extremely wide-ranging and comprehensive overview of the state-of-the-art in rock mechanics and rock engineering and is composed of peer-reviewed, dedicated contributions by all the key experts worldwide. Key features of this set are that it provides a systematic, global summary of new developments in rock mechanics and rock engineering practices as well as looking ahead to future developments in the fields. Contributors are world-renowned experts in the fields of rock mechanics and rock engineering, though younger, talented researchers have also been included. The individual volumes cover an extremely wide array of topics grouped under five overarching themes: Principles (Vol. 1), Laboratory and Field Testing (Vol. 2), Analysis, Modelling and Design (Vol. 3), Excavation, Support and Monitoring (Vol. 4) and Surface and Underground Projects (Vol. 5). This multi-volume work sets a new standard for rock mechanics and engineering compendia and will be the go-to resource for all engineering professionals and academics involved in rock mechanics and engineering for years to come.
Download or read book Design Analysis in Rock Mechanics written by William G. Pariseau and published by CRC Press. This book was released on 2017-07-14 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive introduction to rock mechanics treats the basics of rock mechanics in a clear and straightforward manner and discusses important design problems in terms of the mechanics of materials. This extended third edition includes an additional chapter on Foundations on Jointed Rock. Developed for a complete class in rock engineering, this volume uniquely combines the design of surface and underground rock excavations and addresses: • rock slope stability in surface excavations, from planar block and wedge slides to rotational and toppling failures • shaft and tunnel stability, ranging from naturally-supported openings to analysis and design of artificial support and reinforcement systems • entries and pillars in stratified ground • three-dimensional caverns, with emphasis on cable bolting and backfill • geometry and forces of chimney caving, combination support and trough subsidence • rock bursts and bumps in underground excavations, with focus on dynamic phenomena and on fast and sometimes catastrophic failures. The numerous exercises and examples familiarize the reader with solving basic practical problems in rock mechanics through various design analysis techniques and their applications. Supporting the main text, appendices provide supplementary information about rock, joint, and composite properties, rock mass classification schemes, useful formulas, and an extensive literature list. The large selection of problems at the end of each chapter can be used for home assignment. A solutions manual is available to course instructors. Explanatory and illustrative in character, this volume is suited for courses in rock mechanics, rock engineering and geological engineering design for undergraduate and first year graduate students in mining, civil engineering and applied earth sciences. Moreover, it will form a good introduction to the subject of rock mechanics for earth scientists and engineers from other disciplines.
Download or read book Rock Mechanics and Engineering Volume 1 written by Xia-Ting Feng and published by CRC Press. This book was released on 2017-03-16 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles is the first volume of the five-volume set Rock Mechanics and Engineering and contains twenty-four chapters from key experts in the following fields: - Discontinuities; - Anisotropy; - Rock Stress; - Geophysics; - Strength Criteria; - Modeling Rock Deformation and Failure. The five-volume set “Comprehensive Rock Engineering”, which was published in 1993, has had an important influence on the development of rock mechanics and rock engineering. Significant and extensive advances and achievements in these fields over the last 20 years now justify the publishing of a comparable, new compilation. Rock Mechanics and Engineering represents a highly prestigious, multi-volume work edited by Professor Xia-Ting Feng, with the editorial advice of Professor John A. Hudson. This new compilation offers an extremely wideranging and comprehensive overview of the state-of-the-art in rock mechanics and rock engineering and is composed of peer-reviewed, dedicated contributions by all the key experts worldwide. Key features of this set are that it provides a systematic, global summary of new developments in rock mechanics and rock engineering practices as well as looking ahead to future developments in the fields. Contributors are worldrenowned experts in the fields of rock mechanics and rock engineering, though younger, talented researchers have also been included. The individual volumes cover an extremely wide array of topics grouped under five overarching themes: Principles (Vol. 1), Laboratory and Field Testing (Vol. 2), Analysis, Modelling and Design (Vol. 3), Excavation, Support and Monitoring (Vol. 4) and Surface and Underground Projects (Vol. 5). This multi-volume work sets a new standard for rock mechanics and engineering compendia and will be the go-to resource for all engineering professionals and academics involved in rock mechanics and engineering for years to come.
Download or read book Rock Engineering written by John A. Franklin and published by McGraw-Hill Companies. This book was released on 1989 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rock Mechanics and Rock Engineering From the Past to the Future written by Reşat Ulusay and published by CRC Press. This book was released on 2016-11-18 with total page 1371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Mechanics and Rock Engineering: From the Past to the Future contains the contributions presented at EUROCK2016, the 2016 International Symposium of the International Society for Rock Mechanics (ISRM 2016, Ürgüp, Cappadocia Region, Turkey, 29-31 August 2016). The contributions cover almost all aspects of rock mechanics and rock engineering from theories to engineering practices, emphasizing the future direction of rock engineering technologies. The 204 accepted papers and eight keynote papers, are grouped into several main sections: - Fundamental rock mechanics - Rock properties and experimental rock mechanics - Analytical and numerical methods in rock engineering - Stability of slopes in civil and mining engineering - Design methodologies and analysis - Rock dynamics, rock mechanics and rock engineering at historical sites and monuments - Underground excavations in civil and mining engineering - Coupled processes in rock mass for underground storage and waste disposal - Rock mass characterization - Petroleum geomechanics - Carbon dioxide sequestration - Instrumentation-monitoring in rock engineering and back analysis - Risk management, and - the 2016 Rocha Medal Lecture and the 2016 Franklin Lecture Rock Mechanics and Rock Engineering: From the Past to the Future will be of interest to researchers and professionals involved in the various branches of rock mechanics and rock engineering. EUROCK 2016, organized by the Turkish National Society for Rock Mechanics, is a continuation of the successful series of ISRM symposia in Europe, which began in 1992 in Chester, UK.