Download or read book Comprehensive Characterization of Al coated Titania Nanoparticles with Electron Microscopy and Surface Chemical Analytics written by Jörg Radnik and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Colloids and Particles written by Kevin J. Wilkinson and published by John Wiley & Sons. This book was released on 2007-01-30 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the current knowledge of environmental colloids and includes reviews of the current understanding of structure, role and behaviour of environmental colloids and particles, whilst focussing directly on aquatic systems and soils. In addition, there is substantial critical assessment of the techniques employed for the sampling, size fractionation and characterisation of colloids and particles. Chemical, physical and biological processes and interactions involving colloids are described, and particular attention is paid to quantitative approaches that take account of particle heterogeneity and polydispersity. Presents critical reviews of the state-of-the-art knowledge of environmental colloids Critical assessment of techniques employed for the sampling, size fractionation and characterisation of colloids and particles are given Theoretical and experimental aspects of the methods as well as the required developments and possible recommendations are discussed Each chapter gives a brief introduction general enough for the non-specialist Written by a internationally recognized group of contributors
Download or read book Hydrothermal Growth and Characterization of Titanium Dioxide Nanostructures for Use in Dye Sensitized Solar Cells written by Judith D. Sorge and published by . This book was released on 2009 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the world's energy needs continue to grow, next generation photovoltaic cells are in high demand because they offer the possibility of an inexpensive alternative to current energy production techniques. Dye sensitized solar cells (DSSC's), utilize common materials and low cost commercialization techniques, which make them a compelling choice for research in this area. This research focuses on the titanium dioxide coating, which transfers electrons from the photoactive dye to the electrode. 3-4% efficient DSSC's using doctor bladed titanium dioxide coatings with a specific surface area of 55-60m2/g have been demonstrated in our laboratory. To enhance the efficiency of these cells, both the surface area and the electron conduction of the titania layer must be optimized. This has been done by utilizing high aspect ratio nanoparticles of titania instead of mesoporous layers formed with spherical particles. Anodization of titanium metal or anodic alumina membrane templating are common ways to produce nanorods, but involve complex processes leading toward expensive commercialization. This research instead focuses on the hydrothermal growth of nanofibrous titania on a titanium metal substrate, removing the need for dispersion and deposition procedures as well as using a low temperature processing method. Depending upon the formulation utilized, a variety of structures can be produced, from thick carpets of nanofiber strands to large platelets. The composition and morphology of the products have been characterized with respect to the growth conditions using electron microscopy, energy dispersive spectroscopy and x-ray diffraction. The compositional analysis is used to investigate the complicated reaction mechanisms in the system. Coatings of titania nanotubes were then tested in the DSSC's, as were those with the titanium metal substrate acting as the photo anode. Modeling the geometric parameters of the different pore structures of the coatings helps us to understand the advantages afforded by these new cells.
Download or read book Nanocolloids written by Margarita Sanchez-Dominguez and published by Elsevier. This book was released on 2016-03-09 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocolloids: A Meeting Point for Scientists and Technologists presents an easy-to-read approach to current trends in nanoscale colloid chemistry, which offers relatively simple and economically feasible ways to produce nanomaterials. Nanocolloids have been the subjects of major development in modern technology, with many current and future applications. The book helps scientists and technologists to understand the different aspects of modern nanocolloid science. It outlines the underlying fundamental principles of nanocolloid science and covers applications ranging from emulsions to dispersions and suspensions. You will find details on experimental techniques and methods for the synthesis and characterization of nanocolloids, including the latest developments in nanoemulsions and nanoparticles. Edited by leading academics with over 10 years’ experience in the field of colloid and surfactant science Each chapter is authored by recognized experts in the field Outlines the underlying fundamental science behind nanocolloids Provides comprehensive coverage of current topics and potential applications in nanocolloid science Presents a multidisciplinary approach to help chemical engineers, chemists, physicists, materials scientists and pharmacologists, form an in-depth understanding of nanocolloid science
Download or read book Nanoporous Materials III written by M. Jaroniec and published by Elsevier. This book was released on 2002-05-15 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoporous Materials III contains the invited lectures and peer-reviewed oral and poster contributions to be presented at the 3rd Conference on Nanoporous Materials, which will be hosted in Ottawa, Canada, June 2002. The work covers complementary approaches to and recent advances in the field of nanostructured materials with pore sizes larger than 1nm, such as periodic mesoporous molecular sieves M41S and FSM16 and related materials including clays, carbon molecular sieves, colloidal crystal templated organic and inorganic materials, porous polymers and sol gels. The broad range of topics covered in relation to the synthesis and characterization of ordered mesoporous materials are of great importance for advanced adsorption, catalytic and separation processes as well as the development of nanotechnology. The contents of this title are based on topics to be discussed by invited lecturers, which deal with periodic mesoporous organosilicas, stability and catalytic activity of aluminosilicate mesostructures, electron microscopy studies of ordered materials, imprinted polymers and highly porous metal-organic frameworks. The other contributions deal with tailoring the surface and structural properties of nanoporous materials, giving a detailed characterization as well as demonstrating their usefulness for advanced adsorption and catalytic applications.
Download or read book Comprehensive Nanoscience and Technology written by and published by Academic Press. This book was released on 2010-10-29 with total page 2785 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Introduction: Nanotechnology and its underpinning sciences are progressing with unprecedented rapidity. With technical advances in a variety of nanoscale fabrication and manipulation technologies, the whole topical area is maturing into a vibrant field that is generating new scientific research and a burgeoning range of commercial applications, with an annual market already at the trillion dollar threshold. The means of fabricating and controlling matter on the nanoscale afford striking and unprecedented opportunities to exploit a variety of exotic phenomena such as quantum, nanophotonic and nanoelectromechanical effects. Moreover, researchers are elucidating new perspectives on the electronic and optical properties of matter because of the way that nanoscale materials bridge the disparate theories describing molecules and bulk matter. Surface phenomena also gain a greatly increased significance; even the well-known link between chemical reactivity and surface-to-volume ratio becomes a major determinant of physical properties, when it operates over nanoscale dimensions. Against this background, this comprehensive work is designed to address the need for a dynamic, authoritative and readily accessible source of information, capturing the full breadth of the subject. Its six volumes, covering a broad spectrum of disciplines including material sciences, chemistry, physics and life sciences, have been written and edited by an outstanding team of international experts. Addressing an extensive, cross-disciplinary audience, each chapter aims to cover key developments in a scholarly, readable and critical style, providing an indispensible first point of entry to the literature for scientists and technologists from interdisciplinary fields. The work focuses on the major classes of nanomaterials in terms of their synthesis, structure and applications, reviewing nanomaterials and their respective technologies in well-structured and comprehensive articles with extensive cross-references. It has been a constant surprise and delight to have found, amongst the rapidly escalating number who work in nanoscience and technology, so many highly esteemed authors willing to contribute. Sharing our anticipation of a major addition to the literature, they have also captured the excitement of the field itself in each carefully crafted chapter. Along with our painstaking and meticulous volume editors, full credit for the success of this enterprise must go to these individuals, together with our thanks for (largely) adhering to the given deadlines. Lastly, we record our sincere thanks and appreciation for the skills and professionalism of the numerous Elsevier staff who have been involved in this project, notably Fiona Geraghty, Megan Palmer and Greg Harris, and especially Donna De Weerd-Wilson who has steered it through from its inception. We have greatly enjoyed working with them all, as we have with each other.
Download or read book Preparation of Thermally Stable Doped Titanias written by Denis Joseph Reidy and published by . This book was released on 2004 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis investigated different aspects of the structural chemistry of titanium oxide powders and in particular how doping effects the anatase to rutile phase transition. Chapter 1 gives a summary of the solid state chemistry of titanium dioxide. It also presents some analysis of the main commercial roles and developing fields where titanium oxide has found a use. It summarises the two main crystalline forms used within industry, i.e. the metastable anatase phase and the more stable rutile phase. A synopsis of sol-gel techniques suitable for titania production is also discussed as well as a brief introduction into the development of mesoporous molecules. Chapter II describes and introduces the various analytical techniques used during this investigation of titanium oxide materials. These included powder x-ray diffraction (PXRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), BET surface analysis via nitrogen adsorption and differential thermal analysis (DTA). Chapter III describes the sol-gel synthesis of titania doped with 0-30% Zr and the effects the dopant levels have on the properties of titania. This involves monitoring the anatase to rutile transformation temperature with respect to additive concentration, measurement of the relative weight fractions of both phases versus temperature, analysis of the crystallite size for both polymorphs of titania at different temperatures, determination of the activation energy for anatase to rutile conversion via the use of Arrhenius plots, DTA analysis and microstructure analysis via scanning electron microscopy. PXRD was also used to investigate the solubility of zirconia in the rutile phase as well as the appearance of any oxide phases involving zirconium, titanium and oxygen at elevated temperatures. Chapter IV details the effects of a 1% dopant level into Ti02 using Al, Si, Mn, Co, and V as additives on the properties of titania. The synthesis of these materials is also described and the properties investigated include:- phase transition temperatures, crystallite sizes, weight fractions, microstructure and activation energies for anatase to rutile conversion. Chapter V discusses the synthesis of mixed oxide doped titania and the influence mixed additives exhibit on the properties of titania when compared to single additives within a temperature range of 200-1100oC. The two mixed oxide dopant systems investigated here were 5%Zr5%Si and 5%Zr5%Al. Chapter VI details the different synthesis techniques attempted, i.e. sol-gel and pseudo sol-gel methods, to produce pure mesoporous undoped titania. A synthesis method for 5%Zr5%Si doped mesoporous titania is aldo described. Characterizatin of these materials via low angle powder x-ray diffraction (PXRD) and BET nitrogen adsorption studies is also discussed.
Download or read book TiO2 Nanoparticles written by Aiguo Wu and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique book that summarizes the properties, toxicology, and biomedical applications of TiO2-based nanoparticles Nanotechnology is becoming increasingly important for products used in our daily lives. Nanometer-sized titanium dioxide (TiO2) are widely used in industry for different purposes, such as painting, sunscreen, printing, cosmetics, biomedicine, and so on. This book summarizes the advances of TiO2 based nanobiotechnology and nanomedicine, covering materials properties, toxicological research, and biomedical application, such as antibacter, biosensing, and cancer theranostics. It uniquely integrates the TiO2 applications from physical properties, toxicology to various biomedical applications, and includes black TiO2 based cancer theranostics. Beginning with a comprehensive introduction to the properties and applications of nanoparticles, TiO2 Nanoparticles: Applications in Nanobiotechnology, Theranostics and Nanomedicine offers chapters on: Toxicity of TiO2 Nanoparticles; Antibacterial Applications of TiO2 Nanoparticles; Surface Enhanced Raman Spectrum of TiO2 Nanoparticle for Biosensing (TiO2 Nanoparticle Served as SERS Sensing Substrate); TiO2 as Inorganic Photosensitizer for Photodynamic Therapy; Cancer Theranostics of Black TiO2 Nanoparticles; and Neurodegenerative Disease Diagnostics and Therapy of TiO2-Based Nanoparticles. This title: -Blends the physical properties, toxicology of TiO2 nanoparticles to the many biomedical applications -Includes black TiO2 based cancer theranostics in its coverage -Appeals to a broad audience of researchers in academia and industry working on nanomaterials-based biosensing, drug delivery, nanomedicine TiO2 Nanoparticles: Applications in Nanobiotechnology, Theranostics and Nanomedicine is an ideal book for medicinal chemists, analytical chemists, biochemists, materials scientists, toxicologists, and those in the pharmaceutical industry.
Download or read book Comprehensive Nanoscience and Nanotechnology written by and published by Academic Press. This book was released on 2019-01-02 with total page 1881 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Nanoscience and Technology, Second Edition, Five Volume Set allows researchers to navigate a very diverse, interdisciplinary and rapidly-changing field with up-to-date, comprehensive and authoritative coverage of every aspect of modern nanoscience and nanotechnology. Presents new chapters on the latest developments in the field Covers topics not discussed to this degree of detail in other works, such as biological devices and applications of nanotechnology Compiled and written by top international authorities in the field
Download or read book Photocatalytic Semiconductors written by Aracely Hernández-Ramírez and published by Springer. This book was released on 2014-11-17 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This critical volume examines the different methods used for the synthesis of a great number of photocatalysts, including TiO2, ZnO and other modified semiconductors, as well as characterization techniques used for determining the optical, structural and morphological properties of the semiconducting materials. Additionally, the authors discuss photoelectrochemical methods for determining the light activity of the photocatalytic semiconductors by means of measurement of properties such as band gap energy, flat band potential and kinetics of hole and electron transfer. Photocatalytic Semiconductors: Synthesis, Characterization and Environmental Applications provide an overview of the semiconductor materials from first- to third-generation photocatalysts and their applications in wastewater treatment and water disinfection. The book further presents economic and toxicological aspects in the production and application of photocatalytic materials.
Download or read book Synthesis and Characterization of Titania based Catalysts for Photocatalytic Applications written by Shawn Kendale Blue and published by . This book was released on 2003 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies the synthesis of two types of titanium-based catalysts, ultrasonically treated titania powder and zeolite-supported TiO2. The synthesized catalysts are characterized utilizing both SEM (Scanning Electron Microscopy) and elemental analysis. The synthesized catalysts are then kinetically characterized in the degradation of direct black 38 azo dye.
Download or read book Application of Titanium Dioxide written by Magdalena Janus and published by BoD – Books on Demand. This book was released on 2017-07-26 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide is mainly used as a pigment and photocatalyst. It is possible to find it in food, cosmetics, building materials, electric devices, and others. This book contains chapters about application of titanium dioxide in different branches of economy such as the agriculture, the food industry, the medicine, the cosmetics, the water treatment technologies, and the semiconductors.
Download or read book Nanowires and Nanobelts written by Zhong Lin Wang and published by Springer Science & Business Media. This book was released on 2005-09-29 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1, Metal and Semiconductor Nanowires covers a wide range of materials systems, from noble metals (such as Au, Ag, Cu), single element semiconductors (such as Si and Ge), compound semiconductors (such as InP, CdS and GaAs as well as heterostructures), nitrides (such as GaN and Si3N4) to carbides (such as SiC). The objective of this volume is to cover the synthesis, properties and device applications of nanowires based on metal and semiconductor materials. The volume starts with a review on novel electronic and optical nanodevices, nanosensors and logic circuits that have been built using individual nanowires as building blocks. Then, the theoretical background for electrical properties and mechanical properties of nanowires is given. The molecular nanowires, their quantized conductance, and metallic nanowires synthesized by chemical technique will be introduced next. Finally, the volume covers the synthesis and properties of semiconductor and nitrides nanowires.
Download or read book Field Emission Scanning Electron Microscopy written by Nicolas Brodusch and published by Springer. This book was released on 2017-09-25 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights what is now achievable in terms of materials characterization with the new generation of cold-field emission scanning electron microscopes applied to real materials at high spatial resolution. It discusses advanced scanning electron microscopes/scanning- transmission electron microscopes (SEM/STEM), simulation and post-processing techniques at high spatial resolution in the fields of nanomaterials, metallurgy, geology, and more. These microscopes now offer improved performance at very low landing voltage and high -beam probe current stability, combined with a routine transmission mode capability that can compete with the (scanning-) transmission electron microscopes (STEM/-TEM) historically run at higher beam accelerating voltage
Download or read book XXX Russian Polish Slovak Seminar Theoretical Foundation of Civil Engineering RSP 2021 written by Pavel Akimov and published by Springer Nature. This book was released on 2021-09-14 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of civil, environmental and construction engineering, as presented by researchers and engineers at the XXX Annual Russian-Polish-Slovak Seminar Theoretical Foundation of Civil Engineering (RSP), held in September 2021. Co-organized by six universities from Russia, Poland and Slovakia, the event covered diverse topics such as structural mechanics; building structures; geodesy and geotechnics; transport and environmental issues in civil engineering. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.
Download or read book Titanium Dioxide written by Dongfang Yang and published by BoD – Books on Demand. This book was released on 2018-06-27 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide is currently being used in many industrial products. It provides unique photocatalytic properties for water splitting and purification, bacterial inactivation, and organics degradation. It has also been widely used as the photoanode for dye-sensitized solar cells and coatings for self-cleaning surfaces, biomedical implants, and nanomedicine. This book covers various aspects of titanium dioxide nanomaterials including their unique one-dimensional, two-dimensional, mesoporous, and hierarchical nanostructures and their synthetic methods such as sol-gel, hydrothermal, anodic oxidation, and electrophoretic deposition, as well as its key applications in environmental and energy sectors. Through these 24 chapters written by experts from the international scientific community, readers will have access to a comprehensive overview of the recent research and development findings on the titanium dioxide nanomaterials.
Download or read book Recent Applications in Sol Gel Synthesis written by Usha Chandra and published by BoD – Books on Demand. This book was released on 2017-07-05 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Versatility, extended compositional ranges, better homogeneity, lesser energy consumption, and requirement of nonexpensive equipments have boosted the use of sol-gel process on top of the popularity in the synthesis of nanosystems. The sol-gel technique has not only revolutionized oxide ceramics industry and/or material science but has also extended widely into multidimensional applications. The book Recent Applications in Sol-Gel Synthesis comprises 14 chapters that deal mainly with the application-oriented aspects of the technique. Sol-gel prepared metal oxide (MO) nanostructures like nanospheres, nanorods, nanoflakes, nanotubes, and nanoribbons have been employed in biomedical applications involving drug deliveries, mimicking of natural bone, and antimicrobial activities. The possibility of controlling grain size in aerogel and preparation of ultrahigh-temperature ceramic (UHTC)-based materials, fluorescent glasses, ultraviolet photosensors, and photocatalysts have been discussed in detail by the experts in the field. The usefulness of sol-gel materials as active GRIN, as textile finisher, and as leather modifier with water-repellent and oil-resistive properties would be an incentive for researchers keen to pursue the field.
