Download or read book Composition of Herbaceous Biomass Feedstocks written by and published by . This book was released on 2007 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Compositional Analysis of Herbaceous Feedstocks A Portfolio of Methods for Total Mass Closure Analysis written by and published by . This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The efficient use of herbaceous biomass feedstocks, like corn stover, sorghum or alfalfa will require a strategy for efficiently processing a complex polymeric biomass matrix. Understanding and optimizing biomass fractionation in an enzymatic biomass conversion process may require measuring and tracking 12-15 constituents in the starting feedstock through pretreatment, sacharrification andfermentation. This paper presents a portfolio of wet chemical analysis methods that, when used together, allow for total mass closure analysis of herbaceous feedstocks and tracking of all major biomass constituents through a typical biorefinery process. Methods discussed will include sample preparation, extractions to remove non-structural materials, fractionation of structural constituents forquantitative measurement, options for protein tracking, appropriate QA/QC and translation of measured values into a consistent format for reporting sample composition with high mass closure (>98% analyzed and identified). Constituents measured and reported include moisture, non-structural inorganics (soil), structural inorganics (silica), protein, chlorophyll, sucrose, lignin, cellulose, andhemicellulose (as xylan, arabinan, mannan, galactan, uronic acids, and acetyl groups). Modifications of the feedstock methods for the accurate analysis of liquids and solid process streams will also be presented. The need for high mass closure analysis methods for the calibration of rapid biomass analysis methods will be discussed.

Download or read book Biomass Now written by Miodrag Darko Matovic and published by BoD – Books on Demand. This book was released on 2013-04-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume book on biomass is a reflection of the increase in biomass related research and applications, driven by overall higher interest in sustainable energy and food sources, by increased awareness of potentials and pitfalls of using biomass for energy, by the concerns for food supply and by multitude of potential biomass uses as a source material in organic chemistry, bringing in the concept of bio-refinery. It reflects the trend in broadening of biomass related research and an increased focus on second-generation bio-fuels. Its total of 40 chapters spans over diverse areas of biomass research, grouped into 9 themes.

Download or read book Solid Biofuels for Energy written by Panagiotis Grammelis and published by Springer Science & Business Media. This book was released on 2010-10-22 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fossil fuels are widely used for electricity generation and heating, creating greenhouse gas emissions and other toxic pollutants, which should be minimised according to the most recent environmental legislation. The utilisation of solid fuels with biogenic origin could contribute to the minimisation of these emissions. Solid Biofuels for Energy presents the current status of the engineering disciplines in this specific area, providing an improved background on the energy exploitation options of solid biomass. Within this framework, all thematic priorities related to the solid bioenergy potential and standardisation, commercialised and emerging energy technologies, and quality of solid residues are presented. Special attention has been given to biomass co-firing with coal, since it has the highest potential for commercial application, while combustion and gasification are more promising for units of medium to small scale. This strong practical focus is evident throughout the book, particularly in discussions of: • international standards for solid biofuel specifications; • supply, cost and sustainability of solid biofuels; • technical issues and non-technical barriers in biomass/coal co-firing; and • biomass combustion and gasification characteristics. Solid Biofuels for Energy is an informative reference, written for researchers and postgraduate students working in the field of biomass. It can also be a useful guide for chemical and mechanical engineers, involved in the environment and energy production sectors.

Download or read book Biomass combustion science technology and engineering written by L.S. Nikolaisen and published by Elsevier Inc. Chapters. This book was released on 2013-04-04 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter addresses the categorisation of biomass followed by the preparation and conditioning of biomass before combustion and gasification, which are the main technologies for heat and electricity generation. The physical and chemical characteristics are described for a range of types of biomass, together with selected examples of the common European standards for measuring biomass. The chapter addresses the problems and limitations of selected fuels and considers future trends for fuels such as mixed biopellets and the potential use of marine biomass.

Download or read book Biomass Volume Estimation and Valorization for Energy written by Jaya Shankar Tumuluru and published by BoD – Books on Demand. This book was released on 2017-02-22 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the outcome of contributions by many experts in the field from different disciplines, various backgrounds, and diverse expertise. This book provides information on biomass volume calculation methods and biomass valorization for energy production. The chapters presented in this book include original research and review articles. I hope the research presented in this book will help to advance the use of biomass for bioenergy production and valorization. The key features of the book are: Providing information on biomass volume estimation using direct, nondestructive and remote sensing methods Biomass valorization for energy using thermochemical (gasification and pyrolysis) and biochemical (fermentation) conversion processes.

Download or read book Char and Carbon Materials Derived from Biomass written by Mejdi Jeguirim and published by Elsevier. This book was released on 2019-03-29 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Char and Carbon Materials Derived from Biomass: Production, Characterization and Applications provides an overview of biomass char production methods (pyrolysis, hydrothermal carbonization, etc.), along with the characterization techniques typically used (Scanning Electronic Microscopy, X-Ray Fluorescence, Nitrogen adsorption, etc.) In addition, the book includes a discussion of the various properties of biomass chars and their suitable recovery processes, concluding with a demonstration of applications. As biomass can be converted to energy, biofuels and bioproducts via thermochemical conversion processes, such as combustion, pyrolysis and gasification, this book is ideal for professionals in energy production and storage fields, as well as professionals in waste treatment, gas treatment, and more. Provides a discussion of sources of biomass feedstocks, such as agricultural, woody plants and food processing residue Discusses the various production processes of biomass chars, including pyrolysis and hydrothermal carbonization Explores various applications of biomass chars within different industries, including energy and agronomy

Download or read book Biomass Supply Chains for Bioenergy and Biorefining written by Jens Bo Holm-Nielsen and published by Woodhead Publishing. This book was released on 2016-02-23 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass Supply Chains for Bioenergy and Biorefining highlights the emergence of energy generation through the use of biomass and the ways it is becoming more widely used. The supply chains that produce the feedstocks, harvest, transport, store, and prepare them for combustion or refinement into other forms of fuel are long and complex, often differing from feedstock to feedstock. Biomass Supply Chains for Bioenergy and Biorefining considers every aspect of these supply chains, including their design, management, socioeconomic, and environmental impacts. The first part of the book introduces supply chains, biomass feedstocks, and their analysis, while the second part looks at the harvesting, handling, storage, and transportation of biomass. The third part studies the modeling of supply chains and their management, with the final section discussing, in minute detail, the supply chains involved in the production and usage of individual feedstocks, such as wood and sugar starches, oil crops, industrial biomass wastes, and municipal sewage stocks. Focuses on the complex supply chains of the various potential feedstocks for biomass energy generation Studies a wide range of biomass feedstocks, including woody energy crops, sugar and starch crops, lignocellulosic crops, oil crops, grass crops, algae, and biomass waste Reviews the modeling and optimization, standards, quality control and traceability, socioeconomic, and environmental impacts of supply chains

Download or read book Advancements in Biomass Feedstock Preprocessing Conversion Ready Feedstocks written by J. Richard Hess and published by Frontiers Media SA. This book was released on 2020-03-12 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: The success of lignocellulosic biofuels and biochemical industries depends upon an economic and reliable supply of quality biomass. However, research and development efforts have historically focused on the utilization of agriculturally-derived, cellulosic feedstocks without consideration of their low energy density, high variations in physical and chemical characteristics and potential supply risks in terms of availability and affordability. This Research Topic will explore strategies that enable supply chain improvements in biomass quality and consistency through blending, preprocessing, diversity and landscape design for development of conversion-ready, lignocellulosic feedstocks for production of biofuels and bio-products. Biomass variability has proven a formidable challenge to the emerging biorefining industry, impeding continuous operation and reducing yields required for economical production of lignocellulosic biofuels at scale. Conventional supply systems lack the preprocessing capabilities necessary to ensure consistent biomass feedstocks with physical and chemical properties that are compatible with supply chain operations and conversion processes. Direct coupling of conventional feedstock supply systems with sophisticated conversion systems has reduced the operability of biorefining processes to less than 50%. As the bioeconomy grows, the inherent variability of biomass resources cannot be managed by passive means alone. As such, there is a need to fully recognize the magnitude of biomass variability and uncertainty, as well as the cost of failing to design feedstock supply systems that can mitigate biomass variability and uncertainty. A paradigm shift is needed, from biorefinery designs using raw, single-resource biomass, to advanced feedstock supply systems that harness diverse biomass resources to enable supply chain resilience and development of conversion-ready feedstocks. Blending and preprocessing (e.g., drying, sorting, sizing, fractionation, leaching, densification, etc.) can mitigate variable quality and performance in diverse resources when integrated with downstream conversion systems. Decoupling feedstock supply from biorefining provides an opportunity to manage supply risks and incorporate value-added upgrading to develop feedstocks with improved convertibility and/ or market fungibility. Conversion-ready feedstocks have undergone the required preprocessing to ensure compatibility with conversion and utilization prior to delivery at the biorefinery and represent lignocellulosic biomass with physical and chemical properties that are tailored to meet the requirements of industrially-relevant handling and conversion systems.

Download or read book Sources of Biomass Feedstock Variability and the Potential Impact on Biofuels Production written by and published by . This book was released on 2015 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this study, terrestrial lignocellulosic biomass has the potential to be a carbon neutral and domestic source of fuels and chemicals. However, the innate variability of biomass resources, such as herbaceous and woody materials, and the inconsistency within a single resource due to disparate growth and harvesting conditions, presents challenges for downstream processes which often require materials that are physically and chemically consistent. Intrinsic biomass characteristics, including moisture content, carbohydrate and ash compositions, bulk density, and particle size/shape distributions are highly variable and can impact the economics of transforming biomass into value-added products. For instance, ash content increases by an order of magnitude between woody and herbaceous feedstocks (from ~0.5 to 5 %, respectively) while lignin content drops by a factor of two (from ~30 to 15 %, respectively). This increase in ash and reduction in lignin leads to biofuel conversion consequences, such as reduced pyrolysis oil yields for herbaceous products as compared to woody material. In this review, the sources of variability for key biomass characteristics are presented for multiple types of biomass. Additionally, this review investigates the major impacts of the variability in biomass composition on four conversion processes: fermentation, hydrothermal liquefaction, pyrolysis, and direct combustion. Finally, future research processes aimed at reducing the detrimental impacts of biomass variability on conversion to fuels and chemicals are proposed.

Download or read book Handbook of Bioenergy Crop Plants written by Chittaranjan Kole and published by CRC Press. This book was released on 2012-03-22 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the world’s population is projected to reach 10 billion or more by 2100, devastating fossil fuel shortages loom in the future unless more renewable alternatives to energy are developed. Bioenergy, in the form of cellulosic biomass, starch, sugar, and oils from crop plants, has emerged as one of the cheaper, cleaner, and environmentally sustainable alternatives to traditional forms of energy. Handbook of Bioenergy Crop Plants brings together the work of a panel of global experts who survey the possibilities and challenges involved in biofuel production in the twenty-first century. Section One explores the genetic improvement of bioenergy crops, ecological issues and biodiversity, feedstock logistics and enzymatic cell wall degradation to produce biofuels, and process technologies of liquid transportation fuels production. It also reviews international standards for fuel quality, unique issues of biofuel-powered engines, life-cycle environmental impacts of biofuels compared with fossil fuels, and social concerns. Section Two examines commercialized bioenergy crops, including cassava, Jatropha, forest trees, maize, oil palm, oilseed Brassicas, sorghum, soybean, sugarcane, and switchgrass. Section Three profiles emerging crops such as Brachypodium, diesel trees, minor oilseeds, lower plants, Paulownia, shrub willow, sugarbeet, sunflower, and sweet potato. It also discusses unconventional biomass resources such as vegetable oils, organic waste, and municipal sludge. Highlighting the special requirements, major achievements, and unresolved concerns in bioenergy production from crop plants, the book is destined to lead to future discoveries related to the use of plants for bioenergy production. It will assist in developing innovative ways of ameliorating energy problems on the horizon.

Download or read book Near Infrared Reflectance Spectroscopy NIRS written by F. E. Barton and published by . This book was released on 1989 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Equipment; Analysis procedures; Understanding Nirs; Calibration; Nirs technology transfer; Future applications of nirs; Certification procedures.

Download or read book Lignocellulose Biorefinery Engineering written by Hongzhang Chen and published by Woodhead Publishing. This book was released on 2015-03-03 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass resources and their refining are key research topics internationally as alternatives to fossil fuel resources and oil refining. This book explores the heterogeneous nature of lignocellulosic biomass, which restricts its use as a raw material, and describes the theoretical basis of the lignocellulose refinery. It puts forward the theory of the integrated biomass refinery system, which produces multiple products, including biofuels, biomaterials, biochemicals, food and feed based on careful fractionation of the raw material. Chapter 1 introduces the significance and development of lignocellulose biorefining. Chapter 2 gives the theoretical basis of lignocellulose biorefinery engineering. Chapters 3 to 6 describe in detail biomass refinery engineering from the perspectives of feedstocks, conversions, products and processes respectively. Models of integrated industrial biomass refinery chains are presented in Chapter 7. Finally, Chapter 8 considers future trends in lignocellulose biorefining. Explores mechanisms of selective fractionation of biomass based on biomass structural characteristics and product requirements Addresses biological, physical and chemical conversion technologies, as well as combinations of different methods based on the biomass material characteristics This thorough exploration of lignocellulose biorefining is written by an expert from a key research institute in this field

Download or read book Biomass Densification written by Jaya Shankar Tumuluru and published by Springer Nature. This book was released on 2021-01-26 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph discusses the various biomass feedstocks currently available for biofuels production, and mechanical preprocessing technologies to reduce the feedstock variability for biofuels applications. Variability in the properties of biomass—in terms of moisture, particle size distribution, and low-density—results in storage, transportation, handling, and feeding issues. Currently, biorefineries face serious particle bridging issues, uneven discharge, jamming of equipment, and transportation problems. These issues must be solved in order for smooth operations to be possible. Mechanical preprocessing technologies, such as size reduction, densification, and moisture management using drying and dewatering, can help to overcome these issues. Many densification systems exist that will assist in converting low-density biomass to a high-density commodity type feedstock. In 6 chapters, the impact of densification process variables, such as temperature, pressure, moisture, etc., on biomass particle agglomeration, the quality of the densified products, and the overall energy consumption of the process are discussed, as are the various compression models for powders that can be used for biomass particles agglomeration behavior and optimization of the densification process using statistical and evolutionary methods. The suitability of these densified products for biochemical and thermochemical conversion pathways is also discussed, as well as the various international standards (CEN and ISO) they must adhere to. The author has worked on biomass preprocessing at Idaho National Laboratory for the last ten years. He is the principal investigator for the U.S. Department of Energy Bioenergy Technologies Office-funded “Biomass Size Reduction and Densification” project. He has developed preprocessing technologies to reduce cost and improve quality. The author has published many papers and books focused on biomass preprocessing and pretreatments. Biomass process engineers and biorefinery managers can benefit from this book. Students in chemical, mechanical, biological, and environmental engineering can also use the book to understand preprocessing technologies, which greatly assist in improving the biomass critical material attributes. The book can help policymakers and energy systems planners to understand the biomass properties limitations and technologies to overcome the same.

Download or read book Bioenergy Feedstocks written by Malay C. Saha and published by Wiley-Blackwell. This book was released on 2013-06-24 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioenergy and biofuels are generated from a wide variety of feedstock. Fuels have been converted from a wide range of sources from vegetable oils to grains and sugarcane. Second generation biofuels are being developed around dedicated, non-food energy crops, such as switchgrass and Miscanthus, with an eye toward bioenergy sustainability. Bioenergy Feedstocks: Breeding and Genetics looks at advances in our understanding of the genetics and breeding practices across this diverse range of crops and provides readers with a valuable tool to improve cultivars and increase energy crop yields. Bioenergy Feedstocks: Breeding and Genetics opens with chapters focusing primarily on advances in the genetics and molecular biology of dedicated energy crops. These chapters provide in-depth coverage of new, high-potential feedstocks. The remaining chapters provide valuable overview of breeding efforts of current feedstocks with specific attention paid to the development of bioenergy traits. Coverage in these chapters includes crops such as sorghum, energy canes, corn, and other grasses and forages. The final chapters explore the role of transgenics in bioenergy feedstock production and the development of low-input strategies for producing bioenergy crops. A timely collection of work from a global team of bioenergy researchers and crop scientists, Bioenergy Feedstocks: Breeding and Genetics is an essential reference on cultivar improvement of biomass feedstock crops.

Download or read book Aqueous Pretreatment of Plant Biomass for Biological and Chemical Conversion to Fuels and Chemicals written by Charles E. Wyman and published by John Wiley & Sons. This book was released on 2013-03-27 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant biomass is attracting increasing attention as a sustainable resource for large-scale production of renewable fuels and chemicals. However, in order to successfully compete with petroleum, it is vital that biomass conversion processes are designed to minimize costs and maximize yields. Advances in pretreatment technology are critical in order to develop high-yielding, cost-competitive routes to renewable fuels and chemicals. Aqueous Pretreatment of Plant Biomass for Biological and Chemical Conversion to Fuels and Chemicals presents a comprehensive overview of the currently available aqueous pretreatment technologies for cellulosic biomass, highlighting the fundamental chemistry and biology of each method, key attributes and limitations, and opportunities for future advances. Topics covered include: • The importance of biomass conversion to fuels • The role of pretreatment in biological and chemical conversion of biomass • Composition and structure of biomass, and recalcitrance to conversion • Fundamentals of biomass pretreatment at low, neutral and high pH • Ionic liquid and organosolv pretreatments to fractionate biomass • Comparative data for application of leading pretreatments and effect of enzyme formulations • Physical and chemical features of pretreated biomass • Economics of pretreatment for biological processing • Methods of analysis and enzymatic conversion of biomass streams • Experimental pretreatment systems from multiwell plates to pilot plant operations This comprehensive reference book provides an authoritative source of information on the pretreatment of cellulosic biomass to aid those experienced in the field to access the most current information on the topic. It will also be invaluable to those entering the growing field of biomass conversion.

Download or read book Biomass Preprocessing and Pretreatments for Production of Biofuels written by Jaya Shankar Tumuluru and published by CRC Press. This book was released on 2018-07-26 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering the physical, chemical, and energy properties of lignocellulosic biomass is important to produce high-quality consistent feedstocks with reduced variability for biofuels production. The emphasis of this book will be the beneficial impacts that mechanical, chemical, and thermal preprocessing methods can have on lignocellulosic biomass quality attributes or specifications for solid and liquid biofuels and biopower production technologies. "Preprocessing" refers to treatments that can occur at a distance from conversion and result in an intermediate with added value, with improved conversion performance and efficiency. This book explores the effects of mechanical, chemical, and thermal preprocessing methods on lignocellulosic biomass physical properties and chemical composition and their suitability for biofuels production. For example, biomass mechanical preprocessing methods like size reduction (which impacts the particle size and distribution) and densification (density and size and shape) are important for feedstocks to meet the quality requirements for both biochemical and thermochemical conversion methods like enzymatic conversion, gasification, and pyrolysis process. Thermal preprocessing methods like drying, deep drying, torrefaction, steam explosion, hydrothermal carbonization, and hydrothermal liquefaction effect feedstock's proximate, ultimate and energy property, making biomass suitable for both solid and liquid fuel production. Chemical preprocessing which includes washing, leaching, acid, alkali, and ammonia fiber explosion that can enable biochemical composition, such as modification of lignin and hemicellulose, and impacts the enzymatic conversion application for liquid fuels production. This book also explores the integration of these preprocessing technologies to achieve desired lignocellulosic biomass quality attributes for biofuels production.