Download or read book Spills of Diluted Bitumen from Pipelines written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-03-22 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diluted bitumen has been transported by pipeline in the United States for more than 40 years, with the amount increasing recently as a result of improved extraction technologies and resulting increases in production and exportation of Canadian diluted bitumen. The increased importation of Canadian diluted bitumen to the United States has strained the existing pipeline capacity and contributed to the expansion of pipeline mileage over the past 5 years. Although rising North American crude oil production has resulted in greater transport of crude oil by rail or tanker, oil pipelines continue to deliver the vast majority of crude oil supplies to U.S. refineries. Spills of Diluted Bitumen from Pipelines examines the current state of knowledge and identifies the relevant properties and characteristics of the transport, fate, and effects of diluted bitumen and commonly transported crude oils when spilled in the environment. This report assesses whether the differences between properties of diluted bitumen and those of other commonly transported crude oils warrant modifications to the regulations governing spill response plans and cleanup. Given the nature of pipeline operations, response planning, and the oil industry, the recommendations outlined in this study are broadly applicable to other modes of transportation as well.

Download or read book Chemistry of Fossil Fuels and Biofuels written by Harold Schobert and published by Cambridge University Press. This book was released on 2013-01-17 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses the formation, composition, properties and processing of the principal fossil and biofuels, ideal for graduate students and professionals.

Download or read book Composition and Properties of Drilling and Completion Fluids written by Ryen Caenn and published by Gulf Professional Publishing. This book was released on 2011-09-29 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: The petroleum industry in general has been dominated by engineers and production specialists. The upstream segment of the industry is dominated by drilling/completion engineers. Usually, neither of those disciplines have a great deal of training in the chemistry aspects of drilling and completing a well prior to its going on production. The chemistry of drilling fluids and completion fluids have a profound effect on the success of a well. For example, historically the drilling fluid costs to drill a well have averaged around 7% of the overall cost of the well, before completion. The successful delivery of up to 100% of that wellbore, in many cases may be attributable to the fluid used. Considered the "bible" of the industry, Composition and Properties of Drilling and Completion Fluids, first written by Walter Rogers in 1948, and updated on a regular basis thereafter, is a key tool to achieving successful delivery of the wellbore. In its Sixth Edition, Composition and Properties of Drilling and Completion Fluids has been updated and revised to incorporate new information on technology, economic, and political issues that have impacted the use of fluids to drill and complete oil and gas wells. With updated content on Completion Fluids and Reservoir Drilling Fluids, Health, Safety & Environment, Drilling Fluid Systems and Products, new fluid systems and additives from both chemical and engineering perspectives, Wellbore Stability, adding the new R&D on water-based muds, and with increased content on Equipment and Procedures for Evaluating Drilling Fluid Performance in light of the advent of digital technology and better manufacturing techniques, Composition and Properties of Drilling and Completion Fluids has been thoroughly updated to meet the drilling and completion engineer's needs. - Explains a myriad of new products and fluid systems - Cover the newest API/SI standards - New R&D on water-based muds - New emphases on Health, Safety & Environment - New Chapter on waste management and disposal

Download or read book Elements of Petroleum Geology written by Richard C. Selley and published by Academic Press. This book was released on 2022-06-11 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elements of Petroleum Geology, Fourth Edition is a useful primer for geophysicists, geologists and petroleum engineers in the oil industry who wish to expand their knowledge beyond their specialized area. It is also an excellent introductory text for a university course in petroleum geoscience. This updated edition includes new case studies on non-conventional exploration, including tight oil and shale gas exploration, as well as coverage of the impacts on petroleum geology on the environment. Sections on shale reservoirs, flow units and containers, IOR and EOR, giant petroleum provinces, halo reservoirs, and resource estimation methods are also expanded. - Written by a preeminent petroleum geologist and sedimentologist with decades of petroleum exploration in remote corners of the world - Covers information pertinent to everyone working in the oil and gas industry, especially geophysicists, geologists and petroleum reservoir engineers - Fully revised with updated references and expanded coverage of topics and new case studies

Download or read book Interfacial Properties of Petroleum Products written by Lilianna Z. Pillon and published by CRC Press. This book was released on 2007-11-28 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: With mounting pressure to extract petroleum from oil sands and other unconventional sources, oil refineries must adapt their processing methods to handle increasingly heavy crude oils. Unlike traditional crude oils, the properties of heavier crude oils include higher viscosity, metal, salt, and acid content. This causes their interfacial properties

Download or read book The Properties of Petroleum Fluids written by William D. McCain and published by Pennwell Books. This book was released on 1990 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition expands its scope as a conveniently arranged petroleum fluids reference book for the practicing petroleum engineer and an authoritative college text.

Download or read book Characterization and Properties of Petroleum Fractions written by M. R. Riazi and published by ASTM International. This book was released on 2005 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last three chapters of this book deal with application of methods presented in previous chapters to estimate various thermodynamic, physical, and transport properties of petroleum fractions. In this chapter, various methods for prediction of physical and thermodynamic properties of pure hydrocarbons and their mixtures, petroleum fractions, crude oils, natural gases, and reservoir fluids are presented. As it was discussed in Chapters 5 and 6, properties of gases may be estimated more accurately than properties of liquids. Theoretical methods of Chapters 5 and 6 for estimation of thermophysical properties generally can be applied to both liquids and gases; however, more accurate properties can be predicted through empirical correlations particularly developed for liquids. When these correlations are developed with some theoretical basis, they are more accurate and have wider range of applications. In this chapter some of these semitheoretical correlations are presented. Methods presented in Chapters 5 and 6 can be used to estimate properties such as density, enthalpy, heat capacity, heat of vaporization, and vapor pressure. Characterization methods of Chapters 2-4 are used to determine the input parameters needed for various predictive methods. One important part of this chapter is prediction of vapor pressure that is needed for vapor-liquid equilibrium calculations of Chapter 9.

Download or read book Oil in the Sea III written by National Research Council and published by National Academies Press. This book was released on 2003-03-14 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the early 1970s, experts have recognized that petroleum pollutants were being discharged in marine waters worldwide, from oil spills, vessel operations, and land-based sources. Public attention to oil spills has forced improvements. Still, a considerable amount of oil is discharged yearly into sensitive coastal environments. Oil in the Sea provides the best available estimate of oil pollutant discharge into marine waters, including an evaluation of the methods for assessing petroleum load and a discussion about the concerns these loads represent. Featuring close-up looks at the Exxon Valdez spill and other notable events, the book identifies important research questions and makes recommendations for better analysis ofâ€"and more effective measures againstâ€"pollutant discharge. The book discusses: Inputâ€"where the discharges come from, including the role of two-stroke engines used on recreational craft. Behavior or fateâ€"how oil is affected by processes such as evaporation as it moves through the marine environment. Effectsâ€"what we know about the effects of petroleum hydrocarbons on marine organisms and ecosystems. Providing a needed update on a problem of international importance, this book will be of interest to energy policy makers, industry officials and managers, engineers and researchers, and advocates for the marine environment.

Download or read book Introduction to Petroleum Biotechnology written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2017-12-11 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Petroleum Biotechnology introduces the petroleum engineer to biotechnology, bringing together the various biotechnology methods that are applied to recovery, refining and remediation in the uses of petroleum and petroleum products. A significant amount of petroleum is undiscoverable in reservoirs today using conventional and secondary methods. This reference explains how microbial enhanced oil recovery is aiding to produce more economical and environmentally-friendly metabolic events that lead to improved oil recovery. Meanwhile, in the downstream side of the industry, petroleum refining operators are facing the highest levels of environmental regulations while struggling to process more of the heavier crude oils since conventional physical and chemical refining techniques may not be applicable to heavier crudes. This reference proposes to the engineer and refining manager the concepts of bio-refining applications to not only render heavier crudes as lighter crudes through microbial degradation, but also through biodenitrogenation, biodemetallization and biodesulfurization, making more petroleum derivatives purified and upgraded without the release of more pollutants. Equipped for both upstream and downstream to learn the basics, this book is a necessary primer for today's petroleum engineer. - Presents the fundamentals behind petroleum biotechnology for both upstream and downstream oil and gas operations - Provides the latest technology in reservoir recovery using microbial enhanced oil recovery methods - Helps readers gain insight into the current and future application of using biotechnology as a refining and fuel blending method for heavy oil and tar sands

Download or read book Petroleum Chemistry And Refining written by James G. Speight and published by CRC Press. This book was released on 1997-09-01 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supported by numerous illustrations and references, this book describes the chemistry and physics that occur during the refinery operations, and how the properties of petroleum can be translated into predictability in refinery scenarios. The chapters discuss such topics as: the composition of petroleum, petroleum analysis and evaluation; metals and heteroatoms in petroleum; asphaltenes and the structure of petroleum, thermal chemistry of petroleum constituents; heavy oil upgrading processes; hydrocracking reactions, catalysts, and processes; and instability and incompatibility of petroleum products.

Download or read book Petroleum Reservoir Rock and Fluid Properties written by Abhijit Y. Dandekar and published by CRC Press. This book was released on 2006-02-23 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: A strong foundation in reservoir rock and fluid properties is the backbone of almost all the activities in the petroleum industry. Petroleum Reservoir Rock and Fluid Properties offers a reliable representation of fundamental concepts and practical aspects that encompass this vast subject area. The book provides up-to-date coverage of vari

Download or read book Handbook of Petroleum Product Analysis written by James G. Speight and published by John Wiley & Sons. This book was released on 2015-02-02 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces the reader to the production of the products in a refinery • Introduces the reader to the types of test methods applied to petroleum products, including the need for specifications • Provides detailed explanations for accurately analyzing and characterizing modern petroleum products • Rewritten to include new and evolving test methods • Updates on the evolving test methods and new test methods as well as the various environmental regulations are presented

Download or read book The Chemistry and Technology of Petroleum written by James G. Speight and published by CRC Press. This book was released on 2006-10-31 with total page 982 pages. Available in PDF, EPUB and Kindle. Book excerpt: Refineries must not only adapt to evolving environmental regulations for cleaner product specifications and processing, but also find ways to meet the increasing demand for petroleum products,particularly for liquid fuels and petrochemical feedstocks. The Chemistry and Technology of Petroleum, Fourth Edition offers a 21st century perspective

Download or read book Fundamentals of Petroleum Refining written by Mohamed A. Fahim and published by Elsevier. This book was released on 2009-11-19 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Petroleum Refining presents the fundamentals of thermodynamics and kinetics, and it explains the scientific background essential for understanding refinery operations. The text also provides a detailed introduction to refinery engineering topics, ranging from the basic principles and unit operations to overall refinery economics. The book covers important topics, such as clean fuels, gasification, biofuels, and environmental impact of refining, which are not commonly discussed in most refinery textbooks. Throughout the source, problem sets and examples are given to help the reader practice and apply the fundamental principles of refining. Chapters 1-10 can be used as core materials for teaching undergraduate courses. The first two chapters present an introduction to the petroleum refining industry and then focus on feedstocks and products. Thermophysical properties of crude oils and petroleum fractions, including processes of atmospheric and vacuum distillations, are discussed in Chapters 3 and 4. Conversion processes, product blending, and alkylation are covered in chapters 5-10. The remaining chapters discuss hydrogen production, clean fuel production, refining economics and safety, acid gas treatment and removal, and methods for environmental and effluent treatments. This source can serve both professionals and students (on undergraduate and graduate levels) of Chemical and Petroleum Engineering, Chemistry, and Chemical Technology. Beginners in the engineering field, specifically in the oil and gas industry, may also find this book invaluable. - Provides balanced coverage of fundamental and operational topics - Includes spreadsheets and process simulators for showing trends and simulation case studies - Relates processing to planning and management to give an integrated picture of refining

Download or read book The Chemistry of Hydrocarbon Fuels written by Harold H. Schobert and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Chemistry of Hydrocarbon Fuels is concerned with the chemical aspects of hydrofuels such as coal, petroleum, and natural gas. Topics covered include diagenesis and catagenesis, processing of natural gas and petroleum fractions, coal combustion, and chemicals that can be obtained from fuels. This book is comprised of 14 chapters and begins with a comprehensive treatment of the formation of fuels from accumulated organic matter, along with the organic geochemistry of coal, oil, and gas. The following chapters focus on the composition of hydrocarbon fuels and some of their important physical properties. Production and use of synthesis gas, alternate fuels from coal, and oxygenated fuels are considered. The remaining chapters deal with some of the chemistry of separation, refining, and use of hydrocarbon fuels. This monograph is written primarily for practicing scientists and engineers, fuel scientists, petroleum chemists, and those who are new to the field of fuel science and seek an introduction to fuel chemistry.

Download or read book Deep Oil Spills written by Steven A. Murawski and published by Springer. This book was released on 2019-07-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for oil and gas has brought exploration and production to unprecedented depths of the world’s oceans. Currently, over 50% of the oil from the Gulf of Mexico now comes from waters in excess of 1,500 meters (one mile) deep, where no oil was produced just 20 years ago. The Deepwater Horizon oil spill blowout did much to change the perception of oil spills as coming just from tanker accidents, train derailments, and pipeline ruptures. In fact, beginning with the Ixtoc 1 spill off Campeche, Mexico in 1979-1980, there have been a series of large spill events originating at the sea bottom and creating a myriad of new environmental and well control challenges. This volume explores the physics, chemistry, sub-surface oil deposition and environmental impacts of deep oil spills. Key lessons learned from the responses to previous deep spills, as well as unresolved scientific questions for additional research are highlighted, all of which are appropriate for governmental regulators, politicians, industry decision-makers, first responders, researchers and students wanting an incisive overview of issues surrounding deep-water oil and gas production.

Download or read book Petroleum Refining Design and Applications Handbook Volume 1 written by A. Kayode Coker and published by John Wiley & Sons. This book was released on 2018-08-09 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a renaissance that is occurring in chemical and process engineering, and it is crucial for today's scientists, engineers, technicians, and operators to stay current. With so many changes over the last few decades in equipment and processes, petroleum refining is almost a living document, constantly needing updating. With no new refineries being built, companies are spending their capital re-tooling and adding on to existing plants. Refineries are like small cities, today, as they grow bigger and bigger and more and more complex. A huge percentage of a refinery can be changed, literally, from year to year, to account for the type of crude being refined or to integrate new equipment or processes. This book is the most up-to-date and comprehensive coverage of the most significant and recent changes to petroleum refining, presenting the state-of-the-art to the engineer, scientist, or student. Useful as a textbook, this is also an excellent, handy go-to reference for the veteran engineer, a volume no chemical or process engineering library should be without. Written by one of the world's foremost authorities, this book sets the standard for the industry and is an integral part of the petroleum refining renaissance. It is truly a must-have for any practicing engineer or student in this area.