Download or read book Composite Species in the Hydrodynamic Theory of Atomic Mixing in Multicomponent Partially Ionized Gases written by J. D. Ramshaw and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A dynamical description of atomic mixing in multicomponent gases and plasmas was summarized in a previous report (UCRL-ID-145502). That description is based on the use of separate continuity and momentum equations for each species present, including neutral atoms, ions, and free electrons. This level of detail is not always feasible in practical problems, where subsets of species (e.g., neutral atoms of a particular element together with their ionization products) must be grouped or lumped together into composite species or materials to make the problem tractable. A simple procedure for constructing such composite species was outlined in UCRL-ID-145502, but not in sufficient detail to enable implementation. In particular, the treatment of the free electrons presents some subtleties, since they cannot be included in the composite species for dynamical purposes, whereas they are ordinarily lumped together with the atoms and ions that produced them for state equation purposes. Our purpose here is to provide a more complete description of the procedure by which composite species and their evolution equations may be defined and derived. Special attention is given to the problem of how to deal with the free electrons in a manner consistent with the different roles they play in the dynamics and thermodynamics. The results are given in a form that should be well suited for implementation in hydrodynamics codes that use conventional material state equations.

Download or read book Multicomponent Flow Modeling written by Vincent Giovangigli and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this is book to give a detailed presentation of multicomponent flow models and to investigate the mathematical structure and properties of the resulting system of partial differential equations. These developments are also illustrated by simulating numerically a typical laminar flame. Our aim in the chapters is to treat the general situation of multicomponent flows, taking into account complex chemistry and detailed transport phe nomena. In this book, we have adopted an interdisciplinary approach that en compasses a physical, mathematical, and numerical point of view. In par ticular, the links between molecular models, macroscopic models, mathe matical structure, and mathematical properties are emphasized. We also often mention flame models since combustion is an excellent prototype of multicomponent flow. This book still does not pretend to be a complete survey of existing models and related mathematical results. In particular, many subjects like multi phase-flows , turbulence modeling, specific applications, porous me dia, biological models, or magneto-hydrodynamics are not covered. We rather emphasize the fundamental modeling of multicomponent gaseous flows and the qualitative properties of the resulting systems of partial dif ferential equations. Part of this book was taught at the post-graduate level at the Uni versity of Paris, the University of Versailles, and at Ecole Poly technique in 1998-1999 to students of applied mathematics.

Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mass Transfer in Multicomponent Mixtures written by J. A. Wesselingh and published by . This book was released on 2000 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Publications of the National Bureau of Standards Catalog written by United States. National Bureau of Standards and published by . This book was released on 1983 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transport Phenomena written by Robert Byron Bird and published by . This book was released on 1960 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Rocket Propulsion written by DP Mishra and published by CRC Press. This book was released on 2017-07-20 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book follows a unified approach to present the basic principles of rocket propulsion in concise and lucid form. This textbook comprises of ten chapters ranging from brief introduction and elements of rocket propulsion, aerothermodynamics to solid, liquid and hybrid propellant rocket engines with chapter on electrical propulsion. Worked out examples are also provided at the end of chapter for understanding uncertainty analysis. This book is designed and developed as an introductory text on the fundamental aspects of rocket propulsion for both undergraduate and graduate students. It is also aimed towards practicing engineers in the field of space engineering. This comprehensive guide also provides adequate problems for audience to understand intricate aspects of rocket propulsion enabling them to design and develop rocket engines for peaceful purposes.

Download or read book Intermolecular and Surface Forces written by Jacob N. Israelachvili and published by Academic Press. This book was released on 2011-07-22 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermolecular and Surface Forces describes the role of various intermolecular and interparticle forces in determining the properties of simple systems such as gases, liquids and solids, with a special focus on more complex colloidal, polymeric and biological systems. The book provides a thorough foundation in theories and concepts of intermolecular forces, allowing researchers and students to recognize which forces are important in any particular system, as well as how to control these forces. This third edition is expanded into three sections and contains five new chapters over the previous edition. Starts from the basics and builds up to more complex systems Covers all aspects of intermolecular and interparticle forces both at the fundamental and applied levels Multidisciplinary approach: bringing together and unifying phenomena from different fields This new edition has an expanded Part III and new chapters on non-equilibrium (dynamic) interactions, and tribology (friction forces)

Download or read book Compendium of Polymer Terminology and Nomenclature written by Richard G Jones and published by Royal Society of Chemistry. This book was released on 2009-01-19 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUPAC system of polymer nomenclature has aided the generation of unambiguous names that re ect the historical development of chemistry. However, the explosion in the circulation of information and the globalization of human activities mean that it is now necessary to have a common language for use in legal situations, patents, export-import regulations, and environmental health and safety information. Rather than recommending a ‘unique name’ for each structure, rules have been developed for assigning ‘preferred IUPAC names’, while continuing to allow alternatives in order to preserve the diversity and adaptability of nomenclature. Compendium of Polymer Terminology and Nomenclature is the only publication to collect the most important work on this subject into a single volume. It serves as a handy compendium for scientists and removes the need for time consuming literature searches. One of a series issued by the International Union of Pure and Applied Chemistry (IUPAC), it covers the terminology used in many and varied aspects of polymer science as well as the nomenclature of several di erent types of polymer including regular and irregular single-strand organic polymers, copolymers and regular double-strand (ladder and spiro) organic polymers.

Download or read book Polymer Physics written by Wenbing Hu and published by Springer Science & Business Media. This book was released on 2012-11-05 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: A molecular view on the fundamental issues in polymer physics is provided with an aim at students in chemistry, chemical engineering, condensed matter physics and material science courses. An updated translation by the author, a renowned Chinese chemist, it has been proven to be an effective source of learning for many years. Up-to-date developments are reflected throughout the work in this concise presentation of the topic. The author aims at presenting the subject in an efficient manner, which makes this particularly suitable for teaching polymer physics in settings where time is limited, without having to sacrifice the extensive scope that this topic demands.

Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.

Download or read book Process Intensification written by David Reay and published by Butterworth-Heinemann. This book was released on 2013-06-05 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Intensification: Engineering for Efficiency, Sustainability and Flexibility is the first book to provide a practical working guide to understanding process intensification (PI) and developing successful PI solutions and applications in chemical process, civil, environmental, energy, pharmaceutical, biological, and biochemical systems. Process intensification is a chemical and process design approach that leads to substantially smaller, cleaner, safer, and more energy efficient process technology. It improves process flexibility, product quality, speed to market and inherent safety, with a reduced environmental footprint. This book represents a valuable resource for engineers working with leading-edge process technologies, and those involved research and development of chemical, process, environmental, pharmaceutical, and bioscience systems. No other reference covers both the technology and application of PI, addressing fundamentals, industry applications, and including a development and implementation guide Covers hot and high growth topics, including emission prevention, sustainable design, and pinch analysis World-class authors: Colin Ramshaw pioneered PI at ICI and is widely credited as the father of the technology

Download or read book Structures and Interactions of Ionic Liquids written by Suojiang Zhang and published by Springer. This book was released on 2013-12-20 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structures, Bonding and Hydrogen Bonds, by Kun Dong, Qian Wang, Xingmei Lu, Suojiang Zhang Aggregation in System of Ionic Liquids, by Jianji Wang, Huiyong Wang Dissolution of Biomass Using Ionic Liquids, by Hui Wang, Gabriela Gurau, Robin D. Rogers Effect of the Structures of Ionic Liquids on Their Physical-Chemical Properties, by Yu-Feng Hu, Xiao-Ming Peng Microstructure study of Ionic liquids by spectroscopy, by Haoran Li Structures and Thermodynamic Properties of Ionic Liquids, by Tiancheng Mu, Buxing Han

Download or read book Coarse Graining of Condensed Phase and Biomolecular Systems written by Gregory A. Voth and published by CRC Press. This book was released on 2008-09-22 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring recent developments in the field, Coarse-Graining of Condensed Phase and Biomolecular Systems examines systematic ways of constructing coarse-grained representations for complex systems. It explains how this approach can be used in the simulation and modeling of condensed phase and biomolecular systems. Assembling some of the most influential, world-renowned researchers in the field, this book covers the latest developments in the coarse-grained molecular dynamics simulation and modeling of condensed phase and biomolecular systems. Each chapter focuses on specific examples of evolving coarse-graining methodologies and presents results for a variety of complex systems. The contributors discuss the minimalist, inversion, and multiscale approaches to coarse-graining, along with the emerging challenges of coarse-graining. They also connect atomic-level information with new coarse-grained representations of complex systems, such as lipid bilayers, proteins, peptides, and DNA.

Download or read book Physics and Chemistry of Interfaces written by Hans-Jürgen Butt and published by John Wiley & Sons. This book was released on 2023-02-07 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics and Chemistry of Interfaces Comprehensive textbook on the interdisciplinary field of interface science, fully updated with new content on wetting, spectroscopy, and coatings Physics and Chemistry of Interfaces provides a comprehensive introduction to the field of surface and interface science, focusing on essential concepts rather than specific details, and on intuitive understanding rather than convoluted math. Numerous high-end applications from surface technology, biotechnology, and microelectronics are included to illustrate and help readers easily comprehend basic concepts. The new edition contains an increased number of problems with detailed, worked solutions, making it ideal as a self-study resource. In topic coverage, the highly qualified authors take a balanced approach, discussing advanced interface phenomena in detail while remaining comprehensible. Chapter summaries with the most important equations, facts, and phenomena are included to aid the reader in information retention. A few of the sample topics included in Physics and Chemistry of Interfaces are as follows: Liquid surfaces, covering microscopic picture of a liquid surface, surface tension, the equation of Young and Laplace, and curved liquid surfaces Thermodynamics of interfaces, covering surface excess, internal energy and Helmholtz energy, equilibrium conditions, and interfacial excess energies Charged interfaces and the electric double layer, covering planar surfaces, the Grahame equation, and limitations of the Poisson-Boltzmann theory Surface forces, covering Van der Waals forces between molecules, macroscopic calculations, the Derjaguin approximation, and disjoining pressure Physics and Chemistry of Interfaces is a complete reference on the subject, aimed at advanced students (and their instructors) in physics, material science, chemistry, and engineering. Researchers requiring background knowledge on surface and interface science will also benefit from the accessible yet in-depth coverage of the text.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1981 with total page 1174 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Diffusion in Condensed Matter written by Paul Heitjans and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 971 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive, handbook-style survey of diffusion in condensed matter gives detailed insight into diffusion as the process of particle transport due to stochastic movement. It is understood and presented as a phenomenon of crucial relevance for a large variety of processes and materials. In this book, all aspects of the theoretical fundamentals, experimental techniques, highlights of current developments and results for solids, liquids and interfaces are presented.