Download or read book Complementary Tuning Semiconductor NCs Properties Using Precursor Reactivity Doping and Post synthetic Modification written by Mohammad Sadegh Yadanparast and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantum dots are nanocrystalline semiconductors in which the size is so small that optoelectronic properties are size dependent. QDs have a lot of applications in displays, solar cells, lasers, light emitting diodes, etc. The optoelectronic properties of QDs depend on their size, composition, the shape of the particles and also the surface chemistry of the QDs. Phosphine based precursors have been mostly used in the synthesis of QDs. Due to the lack of tunable reactivity, this class of precursors, QDs with different shape are obtained by under different reaction conditions. With that, branched QDs are less likely to be obtained in one step reaction using phosphine based precursors. To synthesis QDs with a branched structure, in a single step synthesis, mixtures of precursors with different reactivity were used. Using dichalcogenides mixture, CdSe1-xSx hyperbranched supra-quantum dots (HSQDs) where synthesized in a one-step microwave-assisted synthesis and shape evolution mechanism of formation of NCs studied. It is shown that the NCs formed in three steps of nucleation, aggregation, and growth. By controlling the reaction conditions, simple branched tetrapod NCs are prepared, but the obtained NCs have no emission due to unpassivated surface and defects which work as trap. To obtain luminescent NCs obtained through doping. Hyperbranched Mn2+:ZnSe1-xSx NCs also prepared using a mixture of Ph2Se2 and Me2S2. The shape evolution mechanism of the formation of NCs was studied and it is shown that the NCs are formed via oriented attachment of initially formed nanoparticles. The NCs used for thiol sensing, and it observed that they have a better sensitivity and detection limit than spherical QDs. Although hyperbranched NCs have higher sensitivities over nonbranched NCs but, the spherical NCs have better detection limit and can dispersed in aqueous medium by ZnS shell growth followed by silica shell formation. To study the effect of ZnS shell thickness on sensing property of NCs, a set of spherical Mn:ZnSe@ZnS with different ZnS shell thickness were prepared and used for thiol sensing. It observed that in organic medium, thinner ZnS layer gives the highest sensitivity and QDs with thick ZnS shell layer have less sensitivity. For measurement in aqueous medium, QDs transferred to PBS buffer after formation of silica shell over QDs. It observed that NCs with a thin ZnS shell layer lose their emission and sensing completely. Thick ZnS shell protects NCs in the silica shell formation step but they show very low sensitivity to thiol compounds as well. ZnS shell with medium thickness gives the best sensitivity in an aqueous medium. The emission of Mn:ZnSe@ZnS QDs originated from d-d electron transition of Mn(II) ions and is independent to the size of QDs. To extend our study to QDs with band edge emission, preparation of luminescent InP QDs by post-synthetic modification is studied. InP NCs were synthesized using heat up method and successive injection of precursors. Narrow size distribution NCs obtained after size selection precipitation. Emissive NCs obtained after etching using InCl3 and fluoride containing salts. The study showed that more InCl3 case more etching and presence of fluoride-containing salt is necessary for band edge emission of the NCs.

Download or read book Mixed Matrix Membranes written by Clara Casado-Coterillo and published by MDPI. This book was released on 2019-12-16 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed matrix membranes (MMMs) have attracted a large amount of interest in research laboratories worldwide in recent decades, motivated by the gap between a growing interest in developing novel mixed matrix membranes by various research groups and the lack of large-scale implementation. This Special Issue contains six publications dealing with the current opportunities and challenges of mixed matrix membranes development and applications to solve environmental and health challenges of the society of 21st century.

Download or read book Silicon Nanocrystals written by Lorenzo Pavesi and published by John Wiley & Sons. This book was released on 2010-02-02 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique collection of knowledge represents a comprehensive treatment of the fundamental and practical consequences of size reduction in silicon crystals. This clearly structured reference introduces readers to the optical, electrical and thermal properties of silicon nanocrystals that arise from their greatly reduced dimensions. It covers their synthesis and characterization from both chemical and physical viewpoints, including ion implantation, colloidal synthesis and vapor deposition methods. A major part of the text is devoted to applications in microelectronics as well as photonics and nanobiotechnology, making this of great interest to the high-tech industry.

Download or read book Nanocrystal Quantum Dots written by Victor I. Klimov and published by CRC Press. This book was released on 2017-12-19 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: A review of recent advancements in colloidal nanocrystals and quantum-confined nanostructures, Nanocrystal Quantum Dots is the second edition of Semiconductor and Metal Nanocrystals: Synthesis and Electronic and Optical Properties, originally published in 2003. This new title reflects the book’s altered focus on semiconductor nanocrystals. Gathering contributions from leading researchers, this book contains new chapters on carrier multiplication (generation of multiexcitons by single photons), doping of semiconductor nanocrystals, and applications of nanocrystals in biology. Other updates include: New insights regarding the underlying mechanisms supporting colloidal nanocrystal growth A revised general overview of multiexciton phenomena, including spectral and dynamical signatures of multiexcitons in transient absorption and photoluminescence Analysis of nanocrystal-specific features of multiexciton recombination A review of the status of new field of carrier multiplication Expanded coverage of theory, covering the regime of high-charge densities New results on quantum dots of lead chalcogenides, with a focus studies of carrier multiplication and the latest results regarding Schottky junction solar cells Presents useful examples to illustrate applications of nanocrystals in biological labeling, imaging, and diagnostics The book also includes a review of recent progress made in biological applications of colloidal nanocrystals, as well as a comparative analysis of the advantages and limitations of techniques for preparing biocompatible quantum dots. The authors summarize the latest developments in the synthesis and understanding of magnetically doped semiconductor nanocrystals, and they present a detailed discussion of issues related to the synthesis, magneto-optics, and photoluminescence of doped colloidal nanocrystals as well. A valuable addition to the pantheon of literature in the field of nanoscience, this book presents pioneering research from experts whose work has led to the numerous advances of the past several years.

Download or read book Quantum Dot Molecules written by Jiang Wu and published by Springer Science & Business Media. This book was released on 2013-10-28 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: A quantum dot molecule (QDM) is composed of two or more closely spaced quantum dots or “artificial atoms.” In recent years, QDMs have received much attention as an emerging new artificial quantum system. The interesting and unique coupling and energy transfer processes between the “artificial atoms” could substantially extend the range of possible applications of quantum nanostructures. This book reviews recent advances in the exciting and rapidly growing field of QDMs via contributions from some of the most prominent researchers in this scientific community. The book explores many interesting topics such as the epitaxial growth of QDMs, spectroscopic characterization, and QDM transistors, and bridges between the fundamental physics of novel materials and device applications for future information technology. Both theoretical and experimental approaches are considered. Quantum Dot Molecules can be recommended for electrical engineering and materials science department courses on the science and design of advanced and future electronic and optoelectronic devices.

Download or read book Halide Perovskites written by Tze-Chien Sum and published by John Wiley & Sons. This book was released on 2019-03-25 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real insight from leading experts in the field into the causes of the unique photovoltaic performance of perovskite solar cells, describing the fundamentals of perovskite materials and device architectures. The authors cover materials research and development, device fabrication and engineering methodologies, as well as current knowledge extending beyond perovskite photovoltaics, such as the novel spin physics and multiferroic properties of this family of materials. Aimed at a better and clearer understanding of the latest developments in the hybrid perovskite field, this is a must-have for material scientists, chemists, physicists and engineers entering or already working in this booming field.

Download or read book Metal Oxide Nanoparticles in Organic Solvents written by Markus Niederberger and published by Springer Science & Business Media. This book was released on 2009-09-17 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles in Organic Solvents discusses recent advances in the chemistry involved for the controlled synthesis and assembly of metal oxide nanoparticles, the characterizations required by such nanoobjects, and their size and shape depending properties. In the last few years, a valuable alternative to the well-known aqueous sol-gel processes was developed in the form of nonaqueous solution routes. Metal Oxide Nanoparticles in Organic Solvents reviews and compares surfactant- and solvent-controlled routes, as well as providing an overview of techniques for the characterization of metal oxide nanoparticles, crystallization pathways, the physical properties of metal oxide nanoparticles, their applications in diverse fields of technology, and their assembly into larger nano- and mesostructures. Researchers and postgraduates in the fields of nanomaterials and sol-gel chemistry will appreciate this book’s informative approach to chemical formation mechanisms in relation to metal oxides.

Download or read book Inorganic Nanoparticles written by Claudia Altavilla and published by CRC Press. This book was released on 2017-12-19 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the various nanomaterials, inorganic nanoparticles are extremely important in modern technologies. They can be easily and cheaply synthesized and mass produced, and for this reason, they can also be more readily integrated into applications. Inorganic Nanoparticles: Synthesis, Applications, and Perspectives presents an overview of these special materials and explores the myriad ways in which they are used. It addresses a wide range of topics, including: Application of nanoparticles in magnetic storage media Use of metal and oxide nanoparticles to improve performance of oxide thin films as conducting media in commercial gas and vapor sensors Advances in semiconductors for light-emitting devices and other areas related to the energy sector, such as solar energy and energy storage devices (fuel cells, rechargeable batteries, etc.) The expanding role of nanosized particles in the field of catalysis, art conservation, and biomedicine The book’s contributors address the growing global interest in the application of inorganic nanoparticles in various technological sectors. Discussing advances in materials, device fabrication, and large-scale production—all of which are urgently required to reduce global energy demands—they cover innovations in areas such as solid-state lighting, detailing how it still offers higher efficiency but higher costs, compared to conventional lighting. They also address the impact of nanotechnology in the biomedical field, focusing on topics such as quantum dots for bioimaging, nanoparticle-based cancer therapy, drug delivery, antibacterial agents, and more. Fills the informational gap on the wide range of applications for inorganic nanoparticles in areas including biomedicine, electronics, storage media, conservation of cultural heritage, optics, textiles, and cosmetics Assembling work from an array of experts at the top of their respective fields, this book delivers a useful analysis of the vast scope of existing and potential applications for inorganic nanoparticles. Versatile as either a professional research resource or textbook, this effective tool elucidates fundamentals and current advances associated with design, characterization, and application development of this promising and ever-evolving device.

Download or read book Colloidal Semiconductor Nanocrystals Synthesis Properties and Applications written by Vladimir Lesnyak and published by Frontiers Media SA. This book was released on 2020-01-06 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sol Gel Technologies for Glass Producers and Users written by Michel Andre Aegerter and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel Techniques for Glass Producers and Users provides technological information, descriptions and characterizations of prototypes, or products already on the market, and illustrates advantages and disadvantages of the sol-gel process in comparison to other methods. The first chapter entitled "Wet Chemical Technology" gives a summary of the basic principles of the sol-gel chemistry. The most promising applications are related to coatings. Chapter 2 describes the various "Wet Chemical Coating Technologies" from glass cleaning to many deposition and post-coating treatment techniques. These include patterning of coatings through direct or indirect techniques which have became very important and for which the sol-gel processing is particularly well adapted. Chapter 3 entitled "Bulk Glass Technologies" reports on the preparation of special glasses for different applications. Chapter 4 entitled "Coatings and Materials Properties" describes the properties of the different coatings and the sol-gel materials, fibers and powders. The chapter also includes a section dedicated to the characterization techniques especially applied to sol-gel coatings and products.

Download or read book Nanoparticulate Materials written by Kathy Lu and published by John Wiley & Sons. This book was released on 2012-09-25 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as the only systematic and comprehensive treatment on the topic of nanoparticle-based materials, this book covers synthesis, characterization, assembly, shaping and sintering of all types of nanoparticles including metals, ceramics, and semiconductors. A single-authored work, it is suitable as a graduate-level text in nanomaterials courses.

Download or read book Cadmium Telluride Quantum Dots written by John Donegan and published by CRC Press. This book was released on 2013-12-03 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last two decades, semiconductor quantum dots—small colloidal nanoparticles—have garnered a great deal of scientific interest because of their unique properties. Among nanomaterials, CdTe holds special technological importance as the only known II–VI material that can form conventional p–n junctions. This makes CdTe very important for the development of novel optoelectronic devices such as light-emitting diodes, solar cells, and lasers. Moreover, the demand for water-compatible light emitters and the most common biological buffers give CdTe quantum dots fields a veritable edge in biolabeling and bioimaging. Cadmium Telluride Quantum Dots: Advances and Applications focuses on CdTe quantum dots and addresses their synthesis, assembly, optical properties, and applications in biology and medicine. It makes for a very informative reading for anyone involved in nanotechnology and will also benefit those scientists who are looking for a comprehensive account on the current state of quantum dot–related research.

Download or read book Nanostructures written by Christophe Jean Delerue and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the theoretical background needed by physicists, engineers and students to simulate nano-devices, semiconductor quantum dots and molecular devices. It presents in a unified way the theoretical concepts, the more recent semi-empirical and ab initio methods, and their application to experiments. The topics include quantum confinement, dielectric and optical properties, non-radiative processes, defects and impurities, and quantum transport. This guidebook not only provides newcomers with an accessible overview (requiring only basic knowledge of quantum mechanics and solid-state physics) but also provides active researchers with practical simulation tools.

Download or read book Carbon Quantum Dots written by Raz Jelinek and published by Springer. This book was released on 2016-09-14 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the various aspects of the emerging field of carbon dots. Their structural and physico-chemical properties as well as their current and future potential applications are covered. A special chapter on graphene quantum dots is provided. The reader will also find different synthesis routes for carbon quantum dots.

Download or read book Applied Cross Coupling Reactions written by Yasushi Nishihara and published by Springer Science & Business Media. This book was released on 2012-12-14 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Applied Cross-Coupling Reactions” provides students and teachers of advanced organic chemistry with an overview of the history, mechanisms and applications of cross-coupling reactions. Since the discovery of the transition-metal-catalyzed cross-coupling reactions in 1972, numerous synthetic uses and industrial applications have been developed. The mechanistic studies of the cross-coupling reactions have disclosed that three fundamental reactions: oxidative addition, transmetalation, and reductive elimination, are involved in a catalytic cycle. Cross-coupling reactions have allowed us to produce a variety of compounds for industrial purposes, such as natural products, pharmaceuticals, liquid crystals and conjugate polymers for use in electronic devices. Indeed, the Nobel Prize for Chemistry in 2010 was awarded for work on cross-coupling reactions. In this book, the recent trends in cross-coupling reactions are also introduced from the point of view of synthesis design and catalytic activities of transition-metal catalysts.

Download or read book Chemistry of Aluminium Gallium Indium and Thallium written by A.J. Downs and published by Springer Science & Business Media. This book was released on 1993-05-31 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Boron has all the best tunes. That may well be the first impression of the Group 13 elements. The chemical literature fosters the impression not only in the primary journals, but also in asteady outflowofbooks focussing more or less closely on boron and its compounds. The same preoccupation with boron is apparent in the coverage received by the Group 13 elements in the comprehensive and regularly updated volume of the Gmelin Handbook. Yet such an imbalance cannot be explained by any inherent lack ofvariety, interest or consequence in the 'heavier elements. Aluminium is the most abundant metal in the earth's crust; in the industrialised world the metal is second only to iron in its usage, and its compounds can justifiably be said to touch our lives daily - to the potential detriment of those and other lives, some would argue. From being chemical curios, gallium and indium have now gained considerably prominence as sources of compound semiconductors like gallium arsenide and indium antimonide. Nor is there any want ofincident in the chemistriesofthe heavier Group 13 elements. In their redox, coordination and structural properties, there is to be found music indeed, notable not always for its harmony but invariably for its richness and variety. Thisbook seeks to redress the balance with a definitive, wide-rangingand up-to-date review of the chemistry of the Group 13 metals aluminium, gallium, indium and thallium.

Download or read book Semiconductor Nanomaterials written by Challa S. S. R. Kumar and published by John Wiley & Sons. This book was released on 2010-04-05 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book series Nanomaterials for the Life Sciences, provides an in-depth overview of all nanomaterial types and their uses in the life sciences. Each volume is dedicated to a specific material class and covers fundamentals, synthesis and characterization strategies, structure-property relationships and biomedical applications. The series brings nanomaterials to the Life Scientists and life science to the Materials Scientists so that synergies are seen and developed to the fullest. Written by international experts of various facets of this exciting field of research, the series is aimed at scientists of the following disciplines: biology, chemistry, materials science, physics, bioengineering, and medicine, together with cell biology, biomedical engineering, pharmaceutical chemistry, and toxicology, both in academia and fundamental research as well as in pharmaceutical companies. VOLUME 6 - Semiconductor Nanomaterials