Download or read book Compilers and Operating Systems for Low Power written by Luca Benini and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compilers and Operating Systems for Low Power focuses on both application-level compiler directed energy optimization and low-power operating systems. Chapters have been written exclusively for this volume by several of the leading researchers and application developers active in the field. The first six chapters focus on low energy operating systems, or more in general, energy-aware middleware services. The next five chapters are centered on compilation and code optimization. Finally, the last chapter takes a more general viewpoint on mobile computing. The material demonstrates the state-of-the-art work and proves that to obtain the best energy/performance characteristics, compilers, system software, and architecture must work together. The relationship between energy-aware middleware and wireless microsensors, mobile computing and other wireless applications are covered. This work will be of interest to researchers in the areas of low-power computing, embedded systems, compiler optimizations, and operating systems.
Download or read book Languages and Compilers for Parallel Computing written by Lawrence Rauchwerger and published by Springer Science & Business Media. This book was released on 2004-02-25 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-proceedings of the 16th International Workshop on Languages and Compilers for Parallel Computing, LCPC 2003, held in College Station, Texas, USA, in October 2003. The 35 revised full papers presented were selected from 48 submissions during two rounds of reviewing and improvement upon presentation at the workshop. The papers are organized in topical sections on adaptive optimization, data locality, parallel languages, high-level transformations, embedded systems, distributed systems software, low-level transformations, compiling for novel architectures, and optimization infrastructure.
Download or read book Embedded and Networking Systems written by Gul N. Khan and published by CRC Press. This book was released on 2017-07-12 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded and Networking Systems: Design, Software, and Implementation explores issues related to the design and synthesis of high-performance embedded computer systems and networks. The emphasis is on the fundamental concepts and analytical techniques that are applicable to a range of embedded and networking applications, rather than on specific embedded architectures, software development, or system-level integration. This system point of view guides designers in dealing with the trade-offs to optimize performance, power, cost, and other system-level non-functional requirements. The book brings together contributions by researchers and experts from around the world, offering a global view of the latest research and development in embedded and networking systems. Chapters highlight the evolution and trends in the field and supply a fundamental and analytical understanding of some underlying technologies. Topics include the co-design of embedded systems, code optimization for a variety of applications, power and performance trade-offs, benchmarks for evaluating embedded systems and their components, and mobile sensor network systems. The book also looks at novel applications such as mobile sensor systems and video networks. A comprehensive review of groundbreaking technology and applications, this book is a timely resource for system designers, researchers, and students interested in the possibilities of embedded and networking systems. It gives readers a better understanding of an emerging technology evolution that is helping drive telecommunications into the next decade.
Download or read book Engineering a Compiler written by Keith D. Cooper and published by Elsevier. This book was released on 2011-01-18 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: This entirely revised second edition of Engineering a Compiler is full of technical updates and new material covering the latest developments in compiler technology. In this comprehensive text you will learn important techniques for constructing a modern compiler. Leading educators and researchers Keith Cooper and Linda Torczon combine basic principles with pragmatic insights from their experience building state-of-the-art compilers. They will help you fully understand important techniques such as compilation of imperative and object-oriented languages, construction of static single assignment forms, instruction scheduling, and graph-coloring register allocation. In-depth treatment of algorithms and techniques used in the front end of a modern compiler Focus on code optimization and code generation, the primary areas of recent research and development Improvements in presentation including conceptual overviews for each chapter, summaries and review questions for sections, and prominent placement of definitions for new terms Examples drawn from several different programming languages
Download or read book Power efficient System Design written by Preeti Ranjan Panda and published by Springer Science & Business Media. This book was released on 2010-07-23 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Information and communication technology (ICT) industry is said to account for 2% of the worldwide carbon emissions – a fraction that continues to grow with the relentless push for more and more sophisticated computing equipment, c- munications infrastructure, and mobile devices. While computers evolved in the directionofhigherandhigherperformanceformostofthelatterhalfofthe20thc- tury, the late 1990’s and early 2000’ssaw a new emergingfundamentalconcern that has begun to shape our day-to-day thinking in system design – power dissipation. As we elaborate in Chapter 1, a variety of factors colluded to raise power-ef?ciency as a ?rst class design concern in the designer’s mind, with profound consequences all over the ?eld: semiconductor process design, circuit design, design automation tools, system and application software, all the way to large data centers. Power-ef?cient System Design originated from a desire to capture and highlight the exciting developments in the rapidly evolving ?eld of power and energy op- mization in electronic and computer based systems. Tremendous progress has been made in the last two decades, and the topic continues to be a fascinating research area. To develop a clearer focus, we have concentrated on the relatively higher level of design abstraction that is loosely called the system level. In addition to the ext- sive coverage of traditional power reduction targets such as CPU and memory, the book is distinguished by detailed coverage of relatively modern power optimization ideas focussing on components such as compilers, operating systems, servers, data centers, and graphics processors.
Download or read book Languages and Compilers for Parallel Computing written by Henry Gordon Dietz and published by Springer Science & Business Media. This book was released on 2003-05-20 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-proceedings of the 14th International Workshop on Languages and Compilers for Parallel Computing, LCPC 2001, held in Lexington, KY, USA, in August 1-3, 2001. The 28 revised full papers presented were carefully selected during two rounds of reviewing and improvement. All current issues in parallel processing are addressed, in particular compiler optimization, HP Java programming, power-aware parallel architectures, high performance applications, power management of mobile computers, data distribution, shared memory systems, load balancing, garbage collection, parallel components, job scheduling, dynamic parallelization, cache optimization, specification, and dataflow analysis.
Download or read book Compiler Construction written by Shriram Krishnamurthi and published by Springer. This book was released on 2007-07-02 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 16th International Conference on Compiler Construction, CC 2007, held in Braga, Portugal, in March 2007 as part of ETAPS 2007, the European Joint Conferences on Theory and Practice of Software. The 15 revised full are organized in topical sections on architecture, garbage collection and program analysis, register allocation, and program analysis.
Download or read book Embedded Software written by Alberto Sangiovanni-Vincentelli and published by Springer Science & Business Media. This book was released on 2002-09-25 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Second International Conference on Embedded Software, EMSOFT 2002, held in Grenoble, France in October 2002. The book presents 13 invited papers by leading researchers and 17 revised full papers selected during a competitive round of reviewing. The book spans the whole range of embedded software, including operating systems and middleware, programming languages and compilers, modeling and validation, software engineering and programming methodologies, scheduling and execution-time analysis, formal methods, and communication protocols and fault-tolerance
Download or read book Low Power Processors and Systems on Chips written by Christian Piguet and published by CRC Press. This book was released on 2018-10-03 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: The power consumption of microprocessors is one of the most important challenges of high-performance chips and portable devices. In chapters drawn from Piguet's recently published Low-Power Electronics Design, this volume addresses the design of low-power microprocessors in deep submicron technologies. It provides a focused reference for specialists involved in systems-on-chips, from low-power microprocessors to DSP cores, reconfigurable processors, memories, ad-hoc networks, and embedded software. Low-Power Processors and Systems on Chips is organized into three broad sections for convenient access. The first section examines the design of digital signal processors for embedded applications and techniques for reducing dynamic and static power at the electrical and system levels. The second part describes several aspects of low-power systems on chips, including hardware and embedded software aspects, efficient data storage, networks-on-chips, and applications such as routing strategies in wireless RF sensing and actuating devices. The final section discusses embedded software issues, including details on compilers, retargetable compilers, and coverification tools. Providing detailed examinations contributed by leading experts, Low-Power Processors and Systems on Chips supplies authoritative information on how to maintain high performance while lowering power consumption in modern processors and SoCs. It is a must-read for anyone designing modern computers or embedded systems.
Download or read book Handbook of Parallel Computing written by Sanguthevar Rajasekaran and published by CRC Press. This book was released on 2007-12-20 with total page 1224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability of parallel computing to process large data sets and handle time-consuming operations has resulted in unprecedented advances in biological and scientific computing, modeling, and simulations. Exploring these recent developments, the Handbook of Parallel Computing: Models, Algorithms, and Applications provides comprehensive coverage on a
Download or read book Data Access and Storage Management for Embedded Programmable Processors written by Francky Catthoor and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data Access and Storage Management for Embedded Programmable Processors gives an overview of the state-of-the-art in system-level data access and storage management for embedded programmable processors. The targeted application domain covers complex embedded real-time multi-media and communication applications. Many of these applications are data-dominated in the sense that their cost related aspects, namely power consumption and footprint are heavily influenced (if not dominated) by the data access and storage aspects. The material is mainly based on research at IMEC in this area in the period 1996-2001. In order to deal with the stringent timing requirements and the data dominated characteristics of this domain, we have adopted a target architecture style that is compatible with modern embedded processors, and we have developed a systematic step-wise methodology to make the exploration and optimization of such applications feasible in a source-to-source precompilation approach.
Download or read book Power Aware Computer Systems written by Babak Falsafi and published by Springer. This book was released on 2004-12-07 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welcome to the proceedings of the 3rd Power-Aware Computer Systems (PACS 2003) Workshop held in conjunction with the 36th Annual International Symposium on Microarchitecture (MICRO-36). The increase in power and - ergy dissipation in computer systems has begun to limit performance and has also resulted in higher cost and lower reliability. The increase also implies - ducedbatterylifeinportablesystems.Becauseofthemagnitudeoftheproblem, alllevelsofcomputersystems,includingcircuits,architectures,andsoftware,are being employed to address power and energy issues. PACS 2003 was the third workshop in its series to explore power- and energy-awareness at all levels of computer systems and brought together experts from academia and industry. These proceedings include 14 research papers, selected from 43 submissions, spanningawidespectrumofareasinpower-awaresystems.Wehavegrouped the papers into the following categories: (1) compilers, (2) embedded systems, (3) microarchitectures, and (4) cache and memory systems. The ?rst paper on compiler techniques proposes pointer reuse analysis that is biased by runtime information (i.e., the targets of pointers are determined based on the likelihood of their occurrence at runtime) to map accesses to ener- e?cient memory access paths (e.g., avoid tag match). Another paper proposes compiling multiple programs together so that disk accesses across the programs can be synchronized to achieve longer sleep times in disks than if the programs are optimized separately.
Download or read book Proceedings written by and published by . This book was released on 2005 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Efficient Distributed Computing Systems written by Albert Y. Zomaya and published by John Wiley & Sons. This book was released on 2012-07-26 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: The energy consumption issue in distributed computing systems raises various monetary, environmental and system performance concerns. Electricity consumption in the US doubled from 2000 to 2005. From a financial and environmental standpoint, reducing the consumption of electricity is important, yet these reforms must not lead to performance degradation of the computing systems. These contradicting constraints create a suite of complex problems that need to be resolved in order to lead to 'greener' distributed computing systems. This book brings together a group of outstanding researchers that investigate the different facets of green and energy efficient distributed computing. Key features: One of the first books of its kind Features latest research findings on emerging topics by well-known scientists Valuable research for grad students, postdocs, and researchers Research will greatly feed into other technologies and application domains
Download or read book Power aware Computer Systems written by and published by . This book was released on 2004 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Programming from the Ground Up written by Jonathan Bartlett and published by Orange Grove Texts Plus. This book was released on 2009-09-24 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Programming from the Ground Up uses Linux assembly language to teach new programmers the most important concepts in programming. It takes you a step at a time through these concepts: * How the processor views memory * How the processor operates * How programs interact with the operating system * How computers represent data internally * How to do low-level and high-level optimization Most beginning-level programming books attempt to shield the reader from how their computer really works. Programming from the Ground Up starts by teaching how the computer works under the hood, so that the programmer will have a sufficient background to be successful in all areas of programming. This book is being used by Princeton University in their COS 217 "Introduction to Programming Systems" course.
Download or read book Designing Embedded Processors written by Jörg Henkel and published by Springer Science & Business Media. This book was released on 2007-07-27 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: To the hard-pressed systems designer this book will come as a godsend. It is a hands-on guide to the many ways in which processor-based systems are designed to allow low power devices. Covering a huge range of topics, and co-authored by some of the field’s top practitioners, the book provides a good starting point for engineers in the area, and to research students embarking upon work on embedded systems and architectures.