Download or read book Facing the Heat Barrier written by T.A. Heppenheimer and published by Courier Dover Publications. This book was released on 2018-09-12 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume from The NASA History Series presents an overview of the science of hypersonics, the study of flight at speeds at which the physics of flows is dominated by aerodynamic heating. The survey begins during the years immediately following World War II, with the first steps in hypersonic research: the development of missile nose cones and the X-15; the earliest concepts of hypersonic propulsion; and the origin of the scramjet engine. Next, it addresses the re-entry problem, which came to the forefront during the mid-1950s, showing how work in this area supported the manned space program and contributed to the development of the orbital shuttle. Subsequent chapters explore the fading of scramjet studies and the rise of the National Aerospace Plane (NASP) program of 1985–95, which sought to lay groundwork for single-stage vehicles. The program's ultimate shortcomings — in terms of aerodynamics, propulsion, and materials — are discussed, and the book concludes with a look at hypersonics in the post-NASP era, including the development of the X-33 and X-34 launch vehicles, further uses for scramjets, and advances in fluid mechanics. Clearly, ongoing research in hypersonics has yet to reach its full potential, and readers with an interest in aeronautics and astronautics will find this book a fascinating exploration of the field's history and future.

Download or read book Energy Deposition for High Speed Flow Control written by Doyle Knight and published by Cambridge University Press. This book was released on 2019-02-21 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes energy deposition using direct current (DC), microwave and laser discharge for flow control at high speeds.

Download or read book Michigan Manual of Plastic Surgery written by David L. Brown and published by Lippincott Williams & Wilkins. This book was released on 2014-04-09 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first and only pocket-sized, practical manual on plastic surgery, The Michigan Manual of Plastic Surgery is written by residents in the University of Michigan’s renowned plastic surgery training program. This multidisciplinary review features contributions from senior residents in related fields including general surgery, oral and maxillofacial surgery, otolaryngology, orthopaedics, neurosurgery, and urology. Features: Easy-to-follow outline format covers the full range of clinical problems commonly encountered by plastic surgeons. Core content addresses fundamental principles and techniques, skin and soft tissue lesions, head and neck, facial reconstruction, craniofacial, aesthetic surgery, breast, hand and upper extremities, trunk, lower extremities, genitalia, and burns. Interdisciplinary versatility makes the handbook ideal for medical students and surgical residents seeking clinical consultations and pre-, intra-, and postoperative care. Additionally, the review provides a quick consult for practitioners whose work interacts with plastic and reconstructive surgery, as well as for those preparing for the in-service and written board examinations. NEW to the Second Edition... New full-color illustrations improve visual learning and enhance retention of key concepts. Carefully selected topics correspond to topics on plastic surgery in-service and specialty Board examinations. Helpful icons highlight material covered on the In-Service Board Exam.

Download or read book CFL3D User s Manual Version 5 0 written by Sherrie L. Krist and published by . This book was released on 1998 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Investigation of the Flow Over a Spiked nose Hemisphere cylinder at a Mach Number of 6 8 written by Davis H. Crawford and published by . This book was released on 1959 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aerothermodynamic Calculations on X 34 at Mach 6 Wind Tunnel Conditions written by William A. Wood and published by . This book was released on 1999 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hypersonic Flow Theory written by Wallace Hayes and published by Elsevier. This book was released on 2012-12-02 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hypersonic Flow Theory presents the fundamentals of fluid mechanics, focusing on the hypersonic flow theory and approaches in theoretical aerodynamics. This book discusses the assumptions underlying hypersonic flow theory, unified supersonic-hypersonic similitude, two-dimensional and axisymmetric bodies, and circular cylinder. The constant-streamtube-area approximation, streamtube-continuity methods, and tangent-wedge and tangent-cone are also deliberated. This text likewise covers the similar laminar boundary layer solutions, bluntness induced interactions on slender bodies, and free molecule transfer theory. The dynamics of hypersonic flight or hypersonic wing theory, magnetohydrodynamic theory, or any developments involving treatment of the Boltzmann equation are not included. This publication is intended for hypersonic aerodynamicists, students, and researchers conducting work on the hypersonic flow phenomena.

Download or read book Elements of Gas Dynamics written by H. W. Liepmann and published by Courier Corporation. This book was released on 2013-04-09 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing importance of concepts from compressible fluid flow theory for aeronautical applications makes the republication of this first-rate text particularly timely. Intended mainly for aeronautics students, the text will also be helpful to practicing engineers and scientists who work on problems involving the aerodynamics of compressible fluids. Covering the general principles of gas dynamics to provide a working understanding of the essentials of gas flow, the contents of this book form the foundation for a study of the specialized literature and should give the necessary background for reading original papers on the subject. Topics include introductory concepts from thermodynamics, including entropy, reciprocity relations, equilibrium conditions, the law of mass action and condensation; one-dimensional gasdynamics, one-dimensional wave motion, waves in supersonic flow, flow in ducts and wind tunnels, methods of measurement, the equations of frictionless flow, small-perturbation theory, transonic flow, effects of viscosity and conductivity, and much more. The text includes numerous detailed figures and several useful tables, while concluding exercises demonstrate the application of the material in the text and outline additional subjects. Advanced undergraduate or graduate physics and engineering students with at least a working knowledge of calculus and basic physics will profit immensely from studying this outstanding volume.

Download or read book Missile Configuration Design written by S. S. Chin and published by . This book was released on 1961 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beskriver principperne i f.m. konstruktionen af styrede missiler.

Download or read book Supersonic Flow Past a Family of Blunt Axisymmetric Bodies written by Milton Van Dyke and published by . This book was released on 1959 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some 100 numerical computations have been carried out for unyawed bodies of revolution with detached bow waves. The gas is assumed perfect with y=5/3, 7/5, or 1. Free-stream Mach numbers are taken as 1.2, 1.5, 2, 3, 4, 6, 10, and [infinity symbol]. The results are summarized with emphasis on the sphere and paraboloid.

Download or read book Hypersonic Aerothermodynamics written by John J. Bertin and published by AIAA. This book was released on 1994 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern treatment of hypersonic aerothermodynamics for students, engineers, scientists, and program managers involved in the study and application of hypersonic flight. It assumes an understanding of the basic principles of fluid mechanics, thermodynamics, compressible flow, and heat transfer. Ten chapters address: general characterization of hypersonic flows; basic equations of motion; defining the aerothermodynamic environment; experimental measurements of hypersonic flows; stagnation-region flowfield; the pressure distribution; the boundary layer and convective heat transfer; aerodynamic forces and moments; viscous interactions; and aerothermodynamics and design considerations. Includes sample exercises and homework problems. Annotation copyright by Book News, Inc., Portland, OR

Download or read book Heat Transfer written by Konstantin Volkov and published by BoD – Books on Demand. This book was released on 2018-06-27 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on new analytical, experimental, and computational developments in the field of research of heat and mass transfer phenomena. The generation, conversion, use, and exchange of thermal energy between physical systems are considered. Various mechanisms of heat transfer such as thermal conduction, thermal convection, thermal radiation, and transfer of energy by phase changes are presented. Theory and fundamental research in heat and mass transfer, numerical simulations and algorithms, experimental techniques, and measurements as they applied to all kinds of applied and emerging problems are covered.

Download or read book Engineer in Charge written by James R. Hansen and published by . This book was released on 1987 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Light Waves and Their Uses written by Albert Abraham Michelson and published by . This book was released on 1902 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book U S Standard Atmosphere Supplements 1966 written by United States Committee on Extension to the Standard Atmosphere and published by . This book was released on 1967 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hypersonic and High Temperature Gas Dynamics written by John David Anderson and published by AIAA. This book was released on 1989 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a self-contained text for those students and readers interested in learning hypersonic flow and high-temperature gas dynamics. It assumes no prior familiarity with either subject on the part of the reader. If you have never studied hypersonic and/or high-temperature gas dynamics before, and if you have never worked extensively in the area, then this book is for you. On the other hand, if you have worked and/or are working in these areas, and you want a cohesive presentation of the fundamentals, a development of important theory and techniques, a discussion of the salient results with emphasis on the physical aspects, and a presentation of modern thinking in these areas, then this book is also for you. In other words, this book is designed for two roles: 1) as an effective classroom text that can be used with ease by the instructor, and understood with ease by the student; and 2) as a viable, professional working tool for engineers, scientists, and managers who have any contact in their jobs with hypersonic and/or high-temperature flow.

Download or read book Comparison of Effectiveness of Convection Transpiration and Film cooling Methods with Air as Coolant written by Ernst Rudolf Georg Eckert and published by . This book was released on 1953 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various parts of aircraft propulsion engines that are in contact with hot gases often require cooling. Transpiration and film cooling, new methods that supposedly utilize cooling air more effectively than the conventional convection cooling, have already been proposed. The present report presents material necessary for a comparison of the cooling requirements of these two new methods with conventional convection cooling. Correlations that are regarded by the authors as the most reliable today are employed in evaluating each of the cooling processes.