Download or read book Comparison of Advanced Cooling Technologies Efficiency Depending on Outside Temperature written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In some areas, water availability is a serious problem during the summer and could disrupt the normal operation of thermal power plants which needs large amount of water to operate. Moreover, when water quantities are sufficient, there can still be problem created by the waste heat rejected into the water which is regulated in order to limit the impact of thermal pollution on the environment. All these factors can lead to a decrease of electricity production during the summer and during peak hours, when electricity is the most needed. In order to deal with these problems, advanced cooling technologies have been developed and implemented to reduce water consumption and withdrawals but with an effect in the plant efficiency. This report aims at analyzing the efficiency of several cooling technologies with a fixed power plant design and so to produce a reference to be able to compare them.
Download or read book Advanced Cooling Technologies and Applications written by S. M. Sohel Murshed and published by BoD – Books on Demand. This book was released on 2019-01-30 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since conventional cooling techniques are increasing falling short of meeting the ever-growing cooling demands of high heat generating devices, thermal systems, and processes, advanced and innovative cooling technologies are of immense importance to deal with such high thermal management. Hence, this book covers a number of key topics related to advanced cooling approaches, their performance, and applications, including: Evaporative air cooling; Spray impingement cooling; Heat pump-based cooling; Modular cooling for photovoltaic plant; Nucleate pool boiling of refrigerants; Transient flashing spray cooling and application; Compressor cooling systems for industry. The book is aimed at a wide variety of people from graduate students and researchers to manufacturers who are involved or interested in the areas of thermal management systems, cooling technologies, and their applications.
Download or read book Technical Assessment of Advanced Cooling Technologies in the Current Market written by and published by DIANE Publishing. This book was released on with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Role of Exergy in Energy and the Environment written by Sandro Nižetić and published by Springer. This book was released on 2018-07-30 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the analysis and applications of energy, exergy, and environmental issues in all sectors of the economy, including industrial processes, transportation, buildings, and services. Energy sources and technologies considered are hydrocarbons, wind and solar energy, fuel cells, as well as thermal and electrical storage. This book provides theoretical insights, along with state-of-the-art case studies and examples and will appeal to the academic community, but also to energy and environmental professionals and decision makers.
Download or read book Advanced Energy Efficiency Technologies for Solar Heating Cooling and Power Generation written by Xudong Zhao and published by Springer. This book was released on 2019-07-08 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, based on the research experience and outcomes of a group of international contributors, addresses a range of advanced energy efficiency technologies and their applications in solar heating, cooling and power generation, while also providing solutions for tackling recurring low efficiency problems in today’s systems. It highlights the latest technologies and methods, which can significantly improve the performance of solar systems, enabling readers to design, construct and apply high-performance solar systems in or for their own projects. The contributors provide a systematic introduction to state-of-the-art energy efficiency technologies that demonstrates how to implement innovative solar systems. These technologies include: • heat pipes and loop heat pipes; • phase change materials (PCMs) and PCM slurries; • micro-channel panels; • desiccant/adsorption cycling; • ejector cooling and heat pumps; and • solar concentration and thermoelectric units. The book shows how innovative solar systems applicable to rural and urban buildings can be analysed and demonstrates the successful implementation of these advanced technologies. It delivers the design principles and associated energy performance assessment methods for a range of selected solar heating, cooling and power generation projects. This book offers a valuable source of information for final-year undergraduate students, as well as graduate students and academic lecturers, as it promotes the widespread deployment of advanced solar heating, cooling and power generation technologies applicable for buildings across the globe. The book is also a good point of reference for design engineers and energy consultants who wish to extend their knowledge of advanced technologies used to achieve energy efficiency.
Download or read book Technical and Cost Comparison of Absorption and Vapor Compression Cooling Systems with Review of Advanced Cooling Technologies written by Timothy Alan Bauch and published by . This book was released on 1997 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Concepts for Renewable Energy Supply of Data Centres written by Jaume Salom and published by CRC Press. This book was released on 2022-09-01 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid increase of cloud computing, high performance computing (HPC) and the vast growth in Internet and Social Media use have aroused the interest in energy consumption and the carbon footprint of Data Centres. Data Centres primarily contain electronic equipment used for data processing (servers), data storage (storage equipment), and communications (network equipment). Collectively, this equipment processes, stores, and transmits digital information and is known as information technology (IT) equipment. Advanced Concepts for Renewable Energy Supply of Data Centres introduces a number of technical solutions for the supply of power and cooling energy into Data Centres with enhanced utilisation of renewable energy sources in order to achieve low energy Data Centres. Because of the high energy density nature of these unique infrastructures, it is essential to implement energy efficiency measures and reduce consumption before introducing any renewable energy source. A holistic approach is used with the objective of integrating many technical solutions such as management of the IT (Information Technology) load, efficient electrical supply to the IT systems, Low-Ex air-conditioning systems, interaction with district heating and cooling networks, re-use of heat, free cooling (air, seawater, groundwater), optimal use of heat and cold storage, electrical storage and integration in smart grids. This book is therefore a catalogue of advanced technical concepts that could be integrated into Data Centres portfolio in order to increase the overall efficiency and the share of renewable energies in power and cooling supply. Based on dynamic energy models implemented in TRNSYS some concepts are deeply evaluated through yearly simulations. The results of the simulation are illustrated with Sankey charts, where the energy flows per year within the subsystems of each concept for a selected scenario are shown, and graphs showing the results of parametric analysis. A set of environmental metrics (as the non-renewable primary energy) and financial metrics (CAPEX and OPEX) as well of energy efficiency metrics like the well-known PUE, are described and used to evaluate the different technical concepts.
Download or read book Advanced Cooling Technologies and Applications written by S. M. Sohel Murshed and published by . This book was released on 2019 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since conventional cooling techniques are increasing falling short of meeting the ever-growing cooling demands of high heat generating devices, thermal systems, and processes, advanced and innovative cooling technologies are of immense importance to deal with such high thermal management. Hence, this book covers a number of key topics related to advanced cooling approaches, their performance, and applications, including: Evaporative air cooling; Spray impingement cooling; Heat pump-based cooling; Modular cooling for photovoltaic plant; Nucleate pool boiling of refrigerants; Transient flashing spray cooling and application; Compressor cooling systems for industry. The book is aimed at a wide variety of people from graduate students and researchers to manufacturers who are involved or interested in the areas of thermal management systems, cooling technologies, and their applications.
Download or read book Mechanical Design and Manufacturing of Electric Motors written by Wei Tong and published by CRC Press. This book was released on 2022-05-19 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. Focuses on practical design and manufacturing process 2. Contains Industrial working experiences 3. Includes innovations in development of electric machines 4. Includes read-to-implement solutions in electric machine design 5. Discusses state-of-the-art technology in modern electric machine design
Download or read book Advanced Engineering and Technology written by Liquan Xie and published by CRC Press. This book was released on 2014-03-18 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Engineering and Technology contains 110 technical papers from the 2014 Annual Congress on Advanced Engineering and Technology (CAET 2014, Hong Kong, 19-20 April 2014, including the 4th Workshop on Applied Mechanics and Civil Engineering, AMCE 2014). The contributions focus on advanced theories and technologies related to building engineeri
Download or read book Mechanical Design of Electric Motors written by Wei Tong and published by CRC Press. This book was released on 2014-04-28 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid increases in energy consumption and emphasis on environmental protection have posed challenges for the motor industry, as has the design and manufacture of highly efficient, reliable, cost-effective, energy-saving, quiet, precisely controlled, and long-lasting electric motors.Suitable for motor designers, engineers, and manufacturers, as well
Download or read book Heating and Cooling with a Heat Pump written by Canada. Office of Energy Efficiency and published by . This book was released on 2004 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: Begins with a general description of heat pumps and how they work, their terminology, and their standards. This is followed by details on air- and ground-source heat pumps, including their operation, components, energy efficiency considerations, sizing and design considerations, installation, benefits, maintenance, operating costs, and life expectancy. Heating energy costs are then compared for heat pump and electric heating systems at various locations in Canada. Related equipment such as supplementary heating systems, thermostats, and heat distribution systems is also reviewed. Finally, answers are provided to some commonly asked questions about heat pumps.
Download or read book Methods for Phase Diagram Determination written by Ji-Cheng Zhao and published by Elsevier. This book was released on 2011-05-05 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase diagrams are "maps" materials scientists often use to design new materials. They define what compounds and solutions are formed and their respective compositions and amounts when several elements are mixed together under a certain temperature and pressure. This monograph is the most comprehensive reference book on experimental methods for phase diagram determination. It covers a wide range of methods that have been used to determine phase diagrams of metals, ceramics, slags, and hydrides.* Extensive discussion on methodologies of experimental measurements and data assessments * Written by experts around the world, covering both traditional and combinatorial methodologies* A must-read for experimental measurements of phase diagrams
Download or read book CRC Handbook of Thermal Engineering written by Raj P. Chhabra and published by CRC Press. This book was released on 2017-11-08 with total page 1801 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CRC Handbook of Thermal Engineering, Second Edition, is a fully updated version of this respected reference work, with chapters written by leading experts. Its first part covers basic concepts, equations and principles of thermodynamics, heat transfer, and fluid dynamics. Following that is detailed coverage of major application areas, such as bioengineering, energy-efficient building systems, traditional and renewable energy sources, food processing, and aerospace heat transfer topics. The latest numerical and computational tools, microscale and nanoscale engineering, and new complex-structured materials are also presented. Designed for easy reference, this new edition is a must-have volume for engineers and researchers around the globe.
Download or read book A Survey of Alternate Methods for Cooling Condenser Discharge Water written by N. Smith and published by . This book was released on 1971 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nbs Nrc Steam Tables written by Lester Haar and published by CRC Press. This book was released on 1984-01-01 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Energy Efficiency and Flexibility in Smart Buildings written by Alessia Arteconi and published by MDPI. This book was released on 2021-01-21 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue “Evaluation of Energy Efficiency and Flexibility in Smart Buildings” addresses the relevant role of buildings as strategic instruments to improve the efficiency and flexibility of the overall energy system. This role of the built environment is not yet fully developed and exploited and the book content contributes to increasing the general awareness of achievable benefits. In particular, different topics are discussed, such as optimal control, innovative efficient technologies, methodological approaches, and country analysis about energy efficiency and energy flexibility potential of the built environment. The Special Issue offers valuable insights into the most recent research developments worldwide.
