Download or read book Comparative Assessment of Laser assisted Machining for Various Ceramics written by Patrick A. Rebro and published by . This book was released on 2002 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Machining of Advanced Materials written by Narendra B Dahotre and published by CRC Press. This book was released on 2011-03-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced materials are becoming increasingly important as substitutes for traditional materials and as facilitators for new and unique products. They have had a considerable impact on the development of a wide range of strategic technologies. Structural ceramics, biomaterials, composites and intermetallics fall under this category of advanced mater
Download or read book Properties and Applications of Silicon Carbide written by Rosario Gerhardt and published by BoD – Books on Demand. This book was released on 2011-04-04 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, we explore an eclectic mix of articles that highlight some new potential applications of SiC and different ways to achieve specific properties. Some articles describe well-established processing methods, while others highlight phase equilibria or machining methods. A resurgence of interest in the structural arena is evident, while new ways to utilize the interesting electromagnetic properties of SiC continue to increase.
Download or read book Advanced Machining Processes of Metallic Materials written by Wit Grzesik and published by Elsevier. This book was released on 2008-01-22 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining Processes of Metallic Materials updates our knowledge on the metal cutting processes in relation to theory and industrial practice. In particular, many topics reflect recent developments, e.g. modern tool materials, computational machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, and generation and modelling of surface integrity. This book addresses the present state and future development of machining technologies. It provides a comprehensive description of metal cutting theory, experimental and modelling techniques along with basic machining processes and their effective use in a wide range of manufacturing applications. Topics covered include fundamental physical phenomena and methods for their evaluation, available technology of machining processes for specific classes of materials and surface integrity. The book also provides strategies for optimalization techniques and assessment of machinability. Moreover, it describes topics not currently covered in other sources, such as high performance and multitasking (complete) machining with a high potential for increasing productivity, and virtual and e-machining. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks but also new potential (emerging) applications such as micro- and nanotechnology. - Many practical examples of modern machining technology - Applicable for various technical, engineering and scientific levels - Collects together 20 years of research in the field and related technical information
Download or read book SME Technical Paper written by Society of Manufacturing Engineers and published by . This book was released on 2005 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser assisted Micro end Milling written by Yongho Jeon and published by . This book was released on 2005 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Assisted Machining written by Sandip Kunar and published by John Wiley & Sons. This book was released on 2024-05-07 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: LASER-ASSISTED MACHINING This unique book develops exhaustive engineering perceptions of different laser-assisted techniques, reviews the engineering context of different laser fabrication techniques, and describes the application of laser-assisted fabrication techniques. Lasers are essential in the area of material processing because they can produce coherent beams with little divergence. The fabrication process known as surface cladding includes joining (soldering, welding), material removal (laser-aided drilling, cutting, etc.), deformation (extrusion, bending), and material addition. Some remarkable advantages of laser-assisted material development include faster processing rates and preservation of essential alloying components. However, the lack of widespread understanding of various material phenomena and how laser parameters affect them prevents the technology from being widely accepted on an industrial scale. Among the subjects Laser-Assisted Machining covers include high-powered lasers in material processing applications, laser-based joining of metallic and non-metallic materials, direct laser cladding, laser surface processing, laser micro and nano processing, emerging laser materials processing techniques, solid-state lasers, laser cutting, drilling and piercing, laser welding, laser bending or forming, laser cleaning, laser automation and in-process sensing, femtosecond laser micromachining, laser-assisted micro-milling/grinding, laser-assisted jet electrochemical micro-machining, laser-assisted water jet micro-machining, hybrid laser-electrochemical micromachining process, quill and nonreciprocal ultrafast laser writing, laser surface engineering, ultrashort pulsed laser surface texturing, laser interference patterning systems, laser interference lithography, laser-guided discharge texturing. Audience The book will be used by researchers in the fields of manufacturing technology and materials science as well as engineers and high-level technicians for a better understanding of various innovative and novel techniques to cope with the need of micromachining, as well as microfabrication industries for successful implementation of microproduct manufacturing.
Download or read book Advanced Manufacturing Technologies written by Kapil Gupta and published by Springer. This book was released on 2017-04-29 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides details and collective information on working principle, process mechanism, salient features, and unique applications of various advanced manufacturing techniques and processes belong. The book is divided in three sessions covering modern machining methods, advanced repair and joining techniques and, finally, sustainable manufacturing. The latest trends and research aspects of those fields are highlighted.
Download or read book Numerical Modeling and Experimental Investigation of Laser assisted Machining of Silicon Nitride Ceramics written by Xinwei Shen and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser-assisted machining (LAM) is a promising non-conventional machining technique for advanced ceramics. However, the fundamental machining mechanism which governs the LAM process is not well understood so far. Hence, the main objective of this study is to explore the machining mechanism and provide guidance for future LAM operations. In this study, laser-assisted milling (LAMill) of silicon nitride ceramics is focused. Experimental experience reveals that workpiece temperature in LAM of silicon nitride ceramics determines the surface quality of the machined workpiece. Thus, in order to know the thermal features of the workpiece in LAM, the laser-silicon nitride interaction mechanism is investigated via heating experiments. The trends of temperature affected by the key parameters (laser power, laser beam diameter, feed rate, and preheat time) are obtained through a parametric study. Experimental results show that high operating temperature leads to low cutting force, good surface finish, small edge chipping, and low residual stress. The temperature range for brittle-to-ductile transition should be avoided due to the rapid increase of fracture toughness. In order to know the temperature distribution at the cutting zone in the workpiece, a transient three-dimensional thermal model is developed using finite element analysis (FEA) and validated through experiments. Heat generation associated with machining is considered and demonstrated to have little impact on LAM. The model indicates that laser power is one critical parameter for successful operation of LAM. Feed and cutting speed can indirectly affect the operating temperatures. Furthermore, a machining model is established with the distinct element method (or discrete element method, DEM) to simulate the dynamic process of LAM. In the microstructural modeling of a [Beta]-type silicon nitride ceramic, clusters are used to simulate the rod-like grains of the silicon nitride ceramic and parallel bonds act as the intergranular glass phase between grains. The resulting temperature-dependent synthetic materials for LAM are calibrated through the numerical compression, bending and fracture toughness tests. The machining model is also validated through experiments in terms of cutting forces, chip size and depth of subsurface damage.
Download or read book Manufacturing Engineering and Materials Handling 2005 written by and published by . This book was released on 2005 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Measurements Modeling and Metrology Volume 5 written by Tom Proulx and published by Springer Science & Business Media. This book was released on 2011-05-27 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical Measurements, Modeling, and Metrology represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials; MEMS and Nanotechnology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.
Download or read book Thermal Study of Laser assisted Machining of Silicon Nitride written by Sepehr Omidi and published by . This book was released on 2015 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last decades Laser Assisted Machining (LAM) of hard materials has grown into a viable solution for the manufacturing industry. Interest in the machining of ceramics has grown due to the possibilities of LAM reducing tool wear and increasing productivity. The concept is based on heating the ceramic material into a soft phase that makes it much easier to machine. The other advantage this technology has over traditional grinding is that is possible to make complex shapes and even machine threads. While there has been research in LAM of ceramics such as Silicon Nitride, Zirconia, Alumina it often lacks comprehensive analysis for a particular laser source. In order for industry to adopt such a technology an optimized approach to providing results on ceramics is required. A few years ago as a result of ongoing research at NIU the commercial technology Easy to Machine Hard Materials (EMHM(TM)) was developed to address this issue. While research of Silicon Nitride, Zirconia, Alumina and Cemented Carbide are ongoing via EMHM the thrust of this research will be to provide a comprehensive approach and reduce the time required to optimize parameters for machining ceramics. The main issue to address for productivity in industry (when machining) is how to minimize tool wear (so tools last longer) while removing as much material as quickly as possible. This will obviously vary based on material and energy available. To experimentally carry all this work out would require a vast amount of resources and time. As such this proposal discusses the development of an easy to use ANSYS simulation program that will enable the user to see the surface temperature (which can translate to tool life) based on the feed rate, depth of cut, laser power and spindle speed. There are complex thermo-mechanical forces at play and so an optimized program is required to improve throughput of the analysis. We will develop the first generation ANSYS simulation which will help us verify experimental work we have done with the materials that have been researched via EMHM(TM).
Download or read book Theoretical Study of Laser assisted Machining on Silicon Nitride Hollow Ceramic Cylinder Using Finite Element Method written by Mohammed Mudassar Hussain Ansari and published by . This book was released on 2018 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most commonly used technique for machining ceramics is diamond grinding. It accounts for up to 75% of the manufacturing costs resulting in high cost of the product. An LED bulb offering increased brightness, energy saving and long life by using ceramic integration to LED chips costs around 10 times to a normal LED bulb. Complex geometries used in electronics, medical surgeries, aerospace, and automobile industries require the use of costly molds or powder metallurgy for low batch production which does not justify the cost. Laser Assisted Machining (LAM) is a process that uses a laser to locally heat the surface of a component (made of ceramic), making it more ductile and machinable using conventional machine tools. Recent studies have shown that LAM gives improved material removal rate and surface finishing, and reduces the cost of machining, i.e. around 50% reduction in the manufacturing costs. Physical experiments require the use of advanced instruments and specialized tools making it a difficult and time-consuming process. It is necessary to have a predicting thermal study to help design more efficient physical experiments. In this study, Finite Element Analysis (FEA) has been used to analyze the thermal distribution of a workpiece under rotating and translating moving heat source. In LAM, there are many variables that greatly affect the temperature, such as laser size, laser power, translational velocity, etc. Extensive research has been performed on solid cylinders however many new applications such as thermocouple protection tube, cylinder lining, blasting nozzles, bone fusion in surgeries, etc., require application of hollow cylinders. Therefore, this work intends to perform a thermal study on a ceramic tube when a laser beam moving on its outer surface. As the generated heat due to the machining is insignificant compared to the heat created by the laser heat source, this study doesn't consider the mechanical removal of the material. The ceramic chosen for this study is Silicon Nitride as it is widely used due to its excellent wide range of properties making it suitable for all industries. The FEA method and assumptions that will be used on this research has been verified with previous experimental and numerical research on a solid cylinder.
Download or read book Ceramic Machining written by and published by . This book was released on 1992 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Fabrication and Machining of Materials written by Narendra B. Dahotre and published by Springer Science & Business Media. This book was released on 2008-01-25 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamental principles and physical phenomena behind laser-based fabrication and machining processes. It also gives an overview of their existing and potential applications. With laser machining an emerging area in various applications ranging from bulk machining in metal forming to micromachining and microstructuring, this book provides a link between advanced materials and advanced manufacturing techniques. The interdisciplinary approach of this text will help prepare students and researchers for the next generation of manufacturing.
Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:
