Download or read book Comparative Assessment of Direct Drive High Temperature Superconducting Generators in Multi megawatt Class Wind Turbines written by Ben Maples and published by . This book was released on 2010 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper summarizes the work completed under the CRADA between NREL and American Superconductor (AMSC). The CRADA combined NREL and AMSC resources to benchmark high temperature superconducting direct drive (HTSDD) generator technology by integrating the technologies into a conceptual wind turbine design, and comparing the design to geared drive and permanent magnet direct drive (PMDD) wind turbine configurations. Analysis was accomplished by upgrading the NREL Wind Turbine Design Cost and Scaling Model to represent geared and PMDD turbines at machine ratings up to 10 MW and then comparing cost and mass figures of AMSC's HTSDD wind turbine designs to theoretical geared and PMDD turbine designs at 3.1, 6, and 10 MW sizes. Based on the cost and performance data supplied by AMSC, HTSDD technology has good potential to compete successfully as an alternative technology to PMDD and geared technology turbines in the multi megawatt classes. In addition, data suggests the economics of HTSDD turbines improve with increasing size, although several uncertainties remain for all machines in the 6 to 10 MW class.
Download or read book Electrical Drives for Direct Drive Renewable Energy Systems written by Markus Mueller and published by Elsevier. This book was released on 2013-03-25 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind turbine gearboxes present major reliability issues, leading to great interest in the current development of gearless direct-drive wind energy systems. Offering high reliability, high efficiency and low maintenance, developments in these direct-drive systems point the way to the next generation of wind power, and Electrical drives for direct drive renewable energy systems is an authoritative guide to their design, development and operation.Part one outlines electrical drive technology, beginning with an overview of electrical generators for direct drive systems. Principles of electrical design for permanent magnet generators are discussed, followed by electrical, thermal and structural generator design and systems integration. A review of power electronic converter technology and power electronic converter systems for direct drive renewable energy applications is then conducted. Part two then focuses on wind and marine applications, beginning with a commercial overview of wind turbine drive systems and an introduction to direct drive wave energy conversion systems. The commercial application of these technologies is investigated via case studies on the permanent magnet direct drive generator in the Zephyros wind turbine, and the Archimedes Wave Swing (AWS) direct drive wave energy pilot plant. Finally, the book concludes by exploring the application of high-temperature superconducting machines to direct drive renewable energy systems.With its distinguished editors and international team of expert contributors, Electrical drives for direct drive renewable energy systems provides a comprehensive review of key technologies for anyone involved with or interested in the design, construction, operation, development and optimisation of direct drive wind and marine energy systems. - An authorative guide to the design, development and operation of gearless direct drives - Discusses the principles of electrical design for permanent magnet generators and electrical, thermal and structural generator design and systems integration - Investigates the commercial applications of wind turbine drive systems
Download or read book Design of a superconducting DC wind generator written by Liu, Yingzhen and published by KIT Scientific Publishing. This book was released on 2020-11-18 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The trend towards larger power ratings of wind turbines asks for innovations in power generation, which requires lower weight and cost, smaller size, higher efficiency and reliability. Due to high current-carrying capability and no DC losses of superconductors, a superconducting wind generator can have a superior power to weight/volume ratio with high efficiency. The work in the book mainly focuses on the feasibility study and design of a superconducting DC wind generator.
Download or read book Physics and Technology of Sustainable Energy written by E. L. Wolf and published by Oxford University Press. This book was released on 2018-07-12 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explores the science and tecnologies needed for renewable energy. It examines the properties of the earth's atmosphere for transmitting light in from the sun and mediating outflow of infrared energy from the ground, a role that has an effect on the temperature of the earth. It begins by explaining how the sun works, that is by nuclear fusion, and the basic concepts of quantum tunnelling needed are later expanded to allow a competent treatment of semiconductor physics, the discipline behind solar cells. The book covers wind turbine technology, hydroelectric power and pumped-hydro energy storage. It also talks about the history of the Earth's climate and discusses the effects that the present fossil fuel burning, leading to large emission of greenhouse gas, may have on the future temperature of the earth. The sustainable energy discussed in this book will be available in the long term, past the remaining availability of carbon energy, and is also energy that will not tip the climate into warmer conditions. In connection to this, the action of the atmosphere is analyzed both for its transmission of sunlight to the surface for use in solar power, and in secondary forms such as wind, waves and hydroelectricity. Greenhouse gas impurities, such as carbon dioxide, are also examined for their effects on the atmosphere. Building on this analysis, prospects for sustainable energy and moderate climate are assessed.
Download or read book Synthetics Mineral Oils and Bio Based Lubricants written by Leslie R. Rudnick and published by CRC Press. This book was released on 2020-01-29 with total page 1855 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlighting the major economic and industrial changes in the lubrication industry since the first edition, Synthetics, Mineral Oils, and Bio-Based Lubricants: Chemistry and Technology, Third Edition highlights the major economic and industrial changes in the lubrication industry and outlines the state of the art in each major lubricant application area. Chapters cover the use of lubricant fluids, growth or decline of market areas and applications, potential new applications, production capacities, and regulatory issues, including biodegradability, toxicity, and food production equipment lubrication. The highly-anticipated third edition features new and updated chapters including those on automatic and continuously variable transmission fluids, fluids for food-grade applications, oil-soluble polyalkylene glycols, functional bio-based lubricant base stocks, farnesene-derived polyolefins, estolides, bio-based lubricants from soybean oil, and trends in construction equipment lubrication. Features include: Contains an index of terms, acronyms, and analytical testing methods. Presents the latest conventions for describing upgraded mineral oil base fluids. Considers all the major lubrication areas: engine oils, industrial lubricants, food-grade applications, greases, and space-age applications Includes individual chapters on lubricant applications—such as environmentally friendly, disk drive, and magnetizable fluids—for major market areas around the globe. In a single, unique volume, Synthetics, Mineral Oils, and Bio-Based Lubricants: Chemistry and Technology, Third Edition offers property and performance information of fluids, theoretical and practical background to their current applications, and strong indicators for global market trends that will influence the industry for years to come.
Download or read book Green Energy and Technology written by Hatim Machrafi and published by Bentham Science Publishers. This book was released on 2012 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Energy is indispensable in present society. All depend on a constant and reliable source of energy, whether it be for transport, industrial or home applications. The use of such energy sources can present some inconveniences, such as source depletion, pol"
Download or read book Advances in Wind Power written by Rupp Carriveau and published by BoD – Books on Demand. This book was released on 2012-11-21 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's wind energy industry is at a crossroads. Global economic instability has threatened or eliminated many financial incentives that have been important to the development of specific markets. Now more than ever, this essential element of the world energy mosaic will require innovative research and strategic collaborations to bolster the industry as it moves forward. This text details topics fundamental to the efficient operation of modern commercial farms and highlights advanced research that will enable next-generation wind energy technologies. The book is organized into three sections, Inflow and Wake Influences on Turbine Performance, Turbine Structural Response, and Power Conversion, Control and Integration. In addition to fundamental concepts, the reader will be exposed to comprehensive treatments of topics like wake dynamics, analysis of complex turbine blades, and power electronics in small-scale wind turbine systems.
Download or read book Wind Energy Handbook written by Tony Burton and published by John Wiley & Sons. This book was released on 2001-12-12 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: As environmental concerns have focused attention on the generation of electricity from clean and renewable sources wind energy has become the world's fastest growing energy source. The Wind Energy Handbook draws on the authors' collective industrial and academic experience to highlight the interdisciplinary nature of wind energy research and provide a comprehensive treatment of wind energy for electricity generation. Features include: An authoritative overview of wind turbine technology and wind farm design and development In-depth examination of the aerodynamics and performance of land-based horizontal axis wind turbines A survey of alternative machine architectures and an introduction to the design of the key components Description of the wind resource in terms of wind speed frequency distribution and the structure of turbulence Coverage of site wind speed prediction techniques Discussions of wind farm siting constraints and the assessment of environmental impact The integration of wind farms into the electrical power system, including power quality and system stability Functions of wind turbine controllers and design and analysis techniques With coverage ranging from practical concerns about component design to the economic importance of sustainable power sources, the Wind Energy Handbook will be an asset to engineers, turbine designers, wind energy consultants and graduate engineering students.
Download or read book Critical Materials Strategy written by Steven Chu and published by DIANE Publishing. This book was released on 2011-05 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report examines the role of rare earth metals and other materials in the clean energy economy. It was prepared by the U.S. Department of Energy (DoE) based on data collected and research performed during 2010. In the report, DoE describes plans to: (1) develop its first integrated research agenda addressing critical materials, building on three technical workshops convened by the DoE during November and December 2010; (2) strengthen its capacity for information-gathering on this topic; and (3) work closely with international partners, including Japan and Europe, to reduce vulnerability to supply disruptions and address critical material needs. Charts and tables. This is a print on demand report.
Download or read book Superconducting Technology written by Kristian Fossheim and published by World Scientific. This book was released on 1991 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains an interdisciplinary selection of timely articles which cover a wide range of superconducting technologies ranging from high tech medicine (10-12 Gauss) to multipurpose sensors, microwaves, radio engineering, magnet technology for accelerators, magnetic energy storage, and power transmission on the 109 watt scale. It is aimed primarily at the non-specialist and will be suitable as an introductory course book for those in the relevant fields and related industries. As shown in the title several examples of high-c applications are included. While low-Tc is still the leading technology, for instance, in cables and SQUIDS, case studies in these areas are presented.
Download or read book The Power of Change written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-09-30 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electricity, supplied reliably and affordably, is foundational to the U.S. economy and is utterly indispensable to modern society. However, emissions resulting from many forms of electricity generation create environmental risks that could have significant negative economic, security, and human health consequences. Large-scale installation of cleaner power generation has been generally hampered because greener technologies are more expensive than the technologies that currently produce most of our power. Rather than trade affordability and reliability for low emissions, is there a way to balance all three? The Power of Change: Innovation for Development and Deployment of Increasingly Clean Energy Technologies considers how to speed up innovations that would dramatically improve the performance and lower the cost of currently available technologies while also developing new advanced cleaner energy technologies. According to this report, there is an opportunity for the United States to continue to lead in the pursuit of increasingly clean, more efficient electricity through innovation in advanced technologies. The Power of Change: Innovation for Development and Deployment of Increasingly Clean Energy Technologies makes the case that America's advantagesâ€"world-class universities and national laboratories, a vibrant private sector, and innovative states, cities, and regions that are free to experiment with a variety of public policy approachesâ€"position the United States to create and lead a new clean energy revolution. This study focuses on five paths to accelerate the market adoption of increasing clean energy and efficiency technologies: (1) expanding the portfolio of cleaner energy technology options; (2) leveraging the advantages of energy efficiency; (3) facilitating the development of increasing clean technologies, including renewables, nuclear, and cleaner fossil; (4) improving the existing technologies, systems, and infrastructure; and (5) leveling the playing field for cleaner energy technologies. The Power of Change: Innovation for Development and Deployment of Increasingly Clean Energy Technologies is a call for leadership to transform the United States energy sector in order to both mitigate the risks of greenhouse gas and other pollutants and to spur future economic growth. This study's focus on science, technology, and economic policy makes it a valuable resource to guide support that produces innovation to meet energy challenges now and for the future.
Download or read book Wind Vision written by U. S. Department U.S. Department of Energy and published by CreateSpace. This book was released on 2015-03-18 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed roadmap of technical, economic, and institutional actions by the wind industry, the wind research community, and others to optimize wind's potential contribution to a cleaner, more reliable, low-carbon, domestic energy generation portfolio, utilizing U.S. manu-facturing and a U.S. workforce. The roadmap is intended to be the beginning of an evolving, collaborative, and necessarily dynamic process. It thus suggests an approach of continual updates at least every two years, informed by its analysis activities. Roadmap actions are identified in nine topical areas, introduced below.
Download or read book Advances in Modelling and Control of Wind and Hydrogenerators written by Amir Ebrahimi and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advancements in Electric Machines written by J. F. Gieras and published by Springer Science & Business Media. This book was released on 2008-11-14 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, electrical machines are classi?ed into d. c. commutator (brushed) machines, induction (asynchronous) machines and synchronous machines. These three types of electrical machines are still regarded in many academic curricula as fundamental types, despite that d. c. brushed machines (except small machines) have been gradually abandoned and PM brushless machines (PMBM) and switched reluctance machines (SRM) have been in mass p- duction and use for at least two decades. Recently, new topologies of high torque density motors, high speed motors, integrated motor drives and special motors have been developed. Progress in electric machines technology is stimulated by new materials, new areas of applications, impact of power electronics, need for energy saving and new technological challenges. The development of electric machines in the next few years will mostly be stimulated by computer hardware, residential and public applications and transportation systems (land, sea and air). At many Universities teaching and research strategy oriented towards el- trical machinery is not up to date and has not been changed in some co- tries almost since the end of the WWII. In spite of many excellent academic research achievements, the academia–industry collaboration and technology transfer are underestimated or, quite often, neglected. Underestimation of the role of industry, unfamiliarity with new trends and restraint from technology transfer results, with time, in lack of external ?nancial support and drastic - cline in the number of students interested in Power Electrical Engineering.
Download or read book Development of high temperature superconductor cables for high direct current applications written by Preuß, Alan and published by KIT Scientific Publishing. This book was released on 2021-01-14 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: A design process for HTS DC cables was developed for high current applications. Based on the design process, a 35 kA HTS DC cable demonstrator was developed. The superconducting elements of the demonstrator were manufactured and tested individually at 77 K. Afterwards, the demonstrator cable was assembled and tested at 77 K. The assembled demonstrator successfully reached 35 kA at 77 K and self field conditions.
Download or read book Energy Harvesting written by Alireza Khaligh and published by CRC Press. This book was released on 2017-12-19 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Also called energy scavenging, energy harvesting captures, stores, and uses "clean" energy sources by employing interfaces, storage devices, and other units. Unlike conventional electric power generation systems, renewable energy harvesting does not use fossil fuels and the generation units can be decentralized, thereby significantly reducing transmission and distribution losses. But advanced technical methods must be developed to increase the efficiency of devices in harvesting energy from environmentally friendly, "green" resources and converting them into electrical energy. Recognizing this need, Energy Harvesting: Solar, Wind, and Ocean Energy Conversion Systems describes various energy harvesting technologies, different topologies, and many types of power electronic interfaces for stand-alone utilization or grid connection of energy harvesting applications. Along with providing all the necessary concepts and theoretical background, the authors develop simulation models throughout the text to build a practical understanding of system analysis and modeling. With a focus on solar energy, the first chapter discusses the I−V characteristics of photovoltaic (PV) systems, PV models and equivalent circuits, sun tracking systems, maximum power point tracking systems, shading effects, and power electronic interfaces for grid-connected and stand-alone PV systems. It also presents sizing criteria for applications and modern solar energy applications, including residential, vehicular, naval, and space applications. The next chapter reviews different types of wind turbines and electrical machines as well as various power electronic interfaces. After explaining the energy generation technologies, optimal operation principles, and possible utilization techniques of ocean tidal energy harvesting, the book explores near- and offshore approaches for harvesting the kinetic and potential energy of ocean waves. It also describes the required absorber, turbine, and generator types, along with the power electronic interfaces for grid connection and commercialized ocean wave energy conversion applications. The final chapter deals with closed, open, and hybrid-cycle ocean thermal energy conversion systems.
Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 2304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
