Download or read book Compact Heat Exchangers and Enhancement Technology for the Process Industries 2001 written by Ramesh K. Shah and published by Begell House Publishers. This book was released on 2001 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: With keynote papers by leading international specialists the proceedings cowers the following topics; single-phase flow and heat transfer fundamental studies, single-phase augmentation techniques, single-phase heat transfer design data and methods, single-phase heat enhexchanger development and applications, phase-change heat transfer fundamental studies, vaporization, condensationand absorpion augmentation techniques, vaporization and condensation data and methods, phase-change heat exchanger development and applications, fouling in heat exchangers.
Download or read book Process Heat Transfer written by Sarit K. Das and published by Alpha Science Int'l Ltd.. This book was released on 2005 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present text is aimed at giving the students a substantial feel of the fundamentals of heat transfer applied to process industry. Though the introduction of the material is made at the undergraduate level for a first course in Process Heat Transfer', it includes enough advanced material for postgraduate courses on Process Heat Transfer' or Heat Exchangers'. The text starts with summary of single phase heat transfer. Subsequently classification, selection and basic theory of heat transfer equipment are explained. Based on this, traditional heat exchangers as well as stirred tanks are treated in detail. Special emphasis has been laid on plate type heat exchangers. The second part introduces two-phase heat transfer followed by apparatus dealing with phase change such as condensers, evaporators, reboilers and cooling towers. Finally, recent advances in process optimization through pinch technology and energy analysis along with transient response of heat exchangers are introduced. The textbook stresses on design approach.
Download or read book Compact Heat Exchangers and Enhancement Technology for the Process Industries written by R. K. Shah and published by Begell House Publishers. This book was released on 1999 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The drive to minimize capital investment and improve the energy efficiency of process industry plants has led to a reassessment of the desirability and practicality of incorporating compact heat exchangers (CHEs) and heat transfer enhancement technology into process plants. This volume collects papers presented at the International Conference on Compact Heat Exchangers for the Process Industries, whose objectives were to exploit the existing forms of the CHEs and enhancement technology with their potential use and benefits, to identify new forms of the CHEs and enhancement technology, and to identify and discuss barriers and critical issues preventing the broader use of CHEs and enhancement technology.
Download or read book Compact Heat Exchangers and Enhancement Technology for the Process Industries 2003 written by Ramesh K. Shah and published by . This book was released on 2003 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes a total of 65 papers from 16 countries and is divided into the follwoing sections: Single-Phase Flow and Heat Transfer Fundamental Studies; Single-Phase Augmentation Techniques; Single-Phase Heat Transfer Design Data and Methods; Single-Phase Heat Exchanger Development and Applications; Phase-Change Heat Transfer Fundamental Studies; Condebsation and Vaporization Augmentation Techniques; Vaporization and Condensation Design Data and Methods; Phase-Change Heat Exchanger Developmet and Applications; Fouling in Heat Exchangers. These papers represent a focused attention to the use of CHEs and Enhancement Technology in the process industries and indicateenormous opportunities.
Download or read book Compact Heat Exchangers written by J.E. Hesselgreaves and published by Butterworth-Heinemann. This book was released on 2016-09-26 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Heat Exchangers: Selection, Design, and Operation, Second Edition, is fully revised to present the most recent and fundamental ideas and industrial concepts in compact heat exchanger technology. This complete reference compiles all aspects of theory, design rules, operational issues, and the most recent developments and technological advancements in compact heat exchangers. New to this edition is the inclusion of micro, sintered, and porous passage description and data, electronic cooling, and an introduction to convective heat transfer fundamentals. New revised content provides up-to-date coverage of industrially available exchangers, recent fouling theories, and reactor types, with summaries of off-design performance and system effects and installations issues in, for example, automobiles and aircraft. Hesselgreaves covers previously neglected approaches, such as the Second Law (of Thermodynamics), pioneered by Bejan and co-workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of energy, according to interpretation. Contains revised content, covering industrially available exchangers, recent fouling theories, and reactor types Includes useful comparisons throughout with conventional heat exchangers to emphasize the benefits of CPHE applications Provides a thorough system view from commissioning, operation, maintenance, and design approaches to reduce fouling and fouling factors Compiles all aspects of theory, design rules, operational issues, and the most recent developments and technological advancements in compact heat exchangers
Download or read book Compact Heat Exchangers for the Process Industries written by Kenneth J. Bell and published by Begell House Publishers. This book was released on 1997 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Heat Exchangers (CHEs) are characterized by large heat transfer area per unit volume of exchanger, resulting in reduced space, weight, and usually reduced energy requirements and cost compared to conventional designs. The objectives of this conference were to identify existing forms of CHEs with their potential use and benefits, to identify the new forms of CHEs, and to identify and discuss barriers and critical issues preventing the broader use of CHEs for the process industry applications.
Download or read book Two Phase Heat Transfer Enhancement written by Sujoy Kumar Saha and published by Springer. This book was released on 2019-07-04 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief concerns heat transfer and pressure drop in heat transfer enhancement for boiling and condensation. The authors divide their topic into six areas: abrasive treatment and coatings, combined structured and porous surfaces, basic principles of boiling mechanism, vapor space condensation, convective vaporization, and forced condensation inside tubes. Within this framework, the book examines range of specific phenomena including abrasive treatment, open grooves, 3D cavities, etched surfaces, electroplating, pierced 3D cover sheets, attached wire and screen promoters, non-wetting coatings, oxide and ceramic coatings, porous surfaces, structured surfaces (integral roughness), combined structured and porous surfaces, composite surfaces, single-tube pool boiling tests, theoretical fundamentals like liquid superheat, effect of cavity shape and contact angle on superheat, entrapment of vapor in cavities, nucleation at a surface cavity, effect of dissolved gases, bubble departure diameter, bubble dynamics, boiling hysteresis and orientation effects, basic principles of boiling mechanism, visualization and mechanism of boiling in subsurface tunnels, and Chien and Webb parametric boiling studies.
Download or read book Re Engineering the Chemical Processing Plant written by Andrzej Stankiewicz and published by CRC Press. This book was released on 2018-12-14 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first guide to compile current research and frontline developments in the science of process intensification (PI), Re-Engineering the Chemical Processing Plant illustrates the design, integration, and application of PI principles and structures for the development and optimization of chemical and industrial plants. This volume updates professionals on emerging PI equipment and methodologies to promote technological advances and operational efficacy in chemical, biochemical, and engineering environments and presents clear examples illustrating the implementation and application of specific process-intensifying equipment and methods in various commercial arenas.
Download or read book Compact Heat Exchangers for Energy Transfer Intensification written by Jiri Jaromir Klemes and published by CRC Press. This book was released on 2015-12-16 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Heat Exchangers for Energy Transfer Intensification: Low-Grade Heat and Fouling Mitigation provides theoretical and experimental background on heat transfer intensification in modern heat exchangers. Emphasizing applications in complex heat recovery systems for the process industries, this book:Covers various issues related to low-grade hea
Download or read book Emerging Topics in Heat Transfer written by Qiuwang Wang and published by WIT Press. This book was released on 2013-11-06 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented in ten edited chapters this book encompasses important emerging topics in heat transfer equipment, particularly heat exchangers. The chapters have all been selected by invitation only. Advances in high temperature equipment and small scale devices continue to be important as the involved heat transfer and related phenomena are often complex in nature and different mechanisms like heat conduction, convection, turbulence, thermal radiation and phase change as well as chemical reactions may occur simultaneously. The book treats various operating problems, like fouling, and highlights applications in heat exchangers and gas turbine cooling. In engineering design and development, reliable and accurate computational methods are required to replace or complement expensive and time consuming experimental trial and error work. Tremendous advancements in knowledge and competence have been achieved during recent years due to improved computational solution methods for non-linear partial differential equations, turbulence modelling advancement and developments of computers and computing algorithms to achieve efficient and rapid simulations. The chapters of the book thoroughly present such advancement in a variety of applications.
Download or read book Vapor Liquid Two Phase Flow and Phase Change written by Sarit Kumar Das and published by Springer Nature. This book was released on 2023-01-28 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive textbook highlights features of two phase flows and introduces the readers to flow patterns and flow maps. It covers a wide range of fundamental and complex subjects focusing on phase change processes like boiling, condensation or cavitation, and boiling phenomenon starting from pool boiling curves to heat transfer under nucleate boiling, film, and flow boiling. It also discusses themes such as numerical techniques for solving boiling and condensation as well as equipment used in industry for evaporation, boiling, and condensation. It includes pedagogical aspects such as end-of-chapter problems and worked examples to augment learning and self-testing. This book is a valuable addition for students, researchers, and practicing engineers.
Download or read book Fundamentals of Heat Exchanger Design written by Ramesh K. Shah and published by John Wiley & Sons. This book was released on 2003-08-11 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive and unique source integrates the material usually distributed among a half a dozen sources. * Presents a unified approach to modeling of new designs and develops the skills for complex engineering analysis. * Provides industrial insight to the applications of the basic theory developed.
Download or read book Heat Transfer Enhancement in Externally Finned Tubes and Internally Finned Tubes and Annuli written by Sujoy Kumar Saha and published by Springer. This book was released on 2019-07-26 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief deals with externally finned tubes, their geometric parameters, Reynolds number, dimensionless variables, friction factor, plain plate fins on round tubes, the effect of fin spacing, correlations, pain individually finned tubes, circular fins with staggered tubes, low integral fin tubes, wavy fin, enhanced plate fin geometries with round tubes, Offset Strip Fins, convex louver fins, louvered fin, perforated fin, mesh fin, vortex generator, enhanced circular fin geometries, spine or segmented fin, wire loop fin, flat extruded tubes with internal membranes, plate and fin automotive radiators, performance comparison, numerical simulation, advanced fin geometries, hydrophilic coatings, internally finned tubes and annuli, spirally fluted and indented tube, advanced internal fin geometries, and finned annuli. The book is ideal for professionals and researchers dealing with thermal management in devices.
Download or read book Coulson and Richardson s Chemical Engineering written by R. P. Chhabra and published by Butterworth-Heinemann. This book was released on 2019-04-15 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coulson and Richardson's Chemical Engineering: Volume 2A: Particulate Systems and Particle Technology, Sixth Edition, has been fully revised and updated to provide practitioners with an overview of chemical engineering, including clear explanations of theory and thorough coverage of practical applications, all supported by case studies. A worldwide team of contributors has pooled their experience to revise old content and add new content. The content has been updated to be more useful to practicing engineers. This complete reference to chemical engineering will support you throughout your career, as it covers every key chemical engineering topic. Fluid Flow, Heat Transfer and Mass Transfer has been developed from the series’ volume 1, 6th edition. This volume covers the three main transport process of interest to chemical engineers: momentum transfer (fluid flow), heat transfer and mass transfer and the relationships between them. Particulate Systems and Particle Technology has been developed from the series’ volume 2, 5th edition. This volume covers the properties of particulate systems, including the character of individual particles and their behavior in fluids. Sedimentation of particles, both singly and at high concentrations, flow in packed and fluidized beads and filtration are then examined. Separation Processes has been developed from the series’ volume 2, 5th edition. This volume covers distillation and gas absorption, which illustrate applications of the fundamental principles of mass transfer. Several techniques—adsorption, ion exchange, chromatographic and membrane separations, and process intensification—are described. Chemical and Biochemical Reactors and Reaction Engineering has been developed from the series’ volume 3, 3rd edition. Features fully revised reference material converted from textbooks Covers foundational to technical topics Features emerging applications, numerical methods and computational tools
Download or read book Advancement in Materials Manufacturing and Energy Engineering Vol II written by Puneet Verma and published by Springer Nature. This book was released on 2022-01-18 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book (Vol. II) presents select proceedings of the conference on “Advancement in Materials, Manufacturing, and Energy Engineering (ICAMME 2021).” It discusses the latest materials, manufacturing processes, evaluation of materials properties for the application in automotive, aerospace, marine, locomotive, and energy sectors. The topics covered include advanced metal forming, bending, welding and casting techniques, recycling and re-manufacturing of materials and components, materials processing, characterization and applications, materials, composites and polymer manufacturing, powder metallurgy and ceramic forming, numerical modeling and simulation, advanced machining processes, functionally graded materials, non-destructive examination, optimization techniques, engineering materials, heat treatment, material testing, MEMS integration, energy materials, bio-materials, metamaterials, metallography, nanomaterial, SMART materials, bioenergy, fuel cell, and superalloys. The book will be useful for students, researchers, and professionals interested in interdisciplinary topics in the areas of materials, manufacturing, and energy sectors.
Download or read book Heat Transfer Enhancement in Plate and Fin Extended Surfaces written by Sujoy Kumar Saha and published by Springer. This book was released on 2019-06-24 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief deals with heat transfer and friction in plate and fin extended heat transfer enhancement surfaces. It examines Offset-Strip Fin (OSF), Enhancement Principle, Analytically Based Models for j and f vs. Re, Transition from Laminar to Turbulent Region, Correlations for j and f vs. Re, Use of OSF with Liquids, Effect of Percent Fin Offset, Effect of Burred Edges, Louver fin, heat transfer and friction correlations, flow structure in the louver fin array, analytical model for heat transfer and friction, convex louver fin, wavy fin, 3D corrugated fin, perforated fin, pin fins and wire mesh, types of vortex generators, metal foam fin, plain fin, packings, numerical simulation of various types of fins.
Download or read book Microchemical Engineering in Practice written by Thomas Dietrich and published by John Wiley & Sons. This book was released on 2011-11-18 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microchemical Engineering in Practice provides the information chemists and engineers need to evaluate the use of microreactors, covering the technical, operational, and economic considerations for various applications. It explains the systems needed to use microreactors in production and presents examples of microreactor use in different chemistries, including larger scale production processes. There are guidelines on calculating the costs and the risks of production using continuous flow microreactors. Complete with case studies, this is an essential guide for chemists and engineers interested in investigating the advantages of chemical microreactors.
