Download or read book Communications for Manufacturing written by Stephen Withnell and published by Springer. This book was released on 2014-01-13 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of a congress concerning Open Communications, the basis for cost effective Computer Integrated Manufacturing (CIM), are presented. The congress was sponsored by the Commission of the European Communities, DG XIII (Telecommunications, Information Industries and Innovation), at Stuttgart's Annual Machine Tool Fair, 4-7 September 1990. The book provides an overview of international initiatives on implementing open communications in manufacturing/engineering environments, including available communication products on the market. Topics covered encompass industrial needs for open systems for manufacturing, pilot implementations in the USA, Japan and Europe, and introduction to MMS (Manufacturing Message Specification) and NMT (Network Management). Technological solutions that enable the implementation of real multi-vendor environments and allow the full integration from design to manufacture or from order to distribution are also explained. Furthermore, the book highlights the work done in the ESPRIT flagship project, "Communication Network for Manufacturing Applications". During the project's lifetime several experimental and industrial pilot sites were commissioned and these are explained in detail. The book is unique in that it describes both the business strategy and the technological approach. It is aimed at decision makers and people that need to have an up-to-date technical understanding and awareness of future trends in manufacturing systems. Production Engineers, Systems Engineers, Technical Managers, Business Managers, EDP Staff, and Academics will find it useful.
Download or read book Manufacturing Systems written by National Academy of Engineering and published by National Academies Press. This book was released on 1992-02-01 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some 70 percent of U.S. manufacturing output currently faces direct foreign competition. While American firms understand the individual components of their manufacturing processes, they must begin to work with manufacturing systems to develop world-class capabilities. This new book identifies principles-termed foundations-that have proved effective in improving manufacturing systems. Authored by an expert panel, including manufacturing executives, the book provides recommendations for manufacturers, leading to specific action in three areas: Management philosophy and practice. Methods used to measure and predict the performance of systems. Organizational learning and improving system performance through technology. The volume includes in-depth studies of several key issues in manufacturing, including employee involvement and empowerment, using learning curves to improve quality, measuring performance against that of the competition, focusing on customer satisfaction, and factory modernization. It includes a unique paper on jazz music as a metaphor for participative manufacturing management. Executives, managers, engineers, researchers, faculty, and students will find this book an essential tool for guiding this nation's businesses toward developing more competitive manufacturing systems.
Download or read book Globalization of Manufacturing in the Digital Communications Era of the 21st Century written by Gianni Jacucci and published by Springer. This book was released on 2013-11-11 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International PROLAMAT Conference is an internationally well known event for demonstrating and evaluating activities and progress in the field of discrete manufacturing. Sponsored by the International Federation for Information Processing (IFIP), the PROLAMAT is traditionally held every three years and it includes the whole area of advanced software technology for Design and Manufacturing in Discrete Manufacturing. Past editions of the International PROLAMA T Conference have explored: -Manufacturing Technology, -Advances in CAD/CAM, -Software for Discrete Manufacturing, -Software for Manufacturing. The Eight International PROLAMAT held in 1992 (Tokyo), focused on the theme of Man in CIM. The 1995 PROLAMAT (Berlin), featured the theme of Life Cycle Modelling for Innovative Products and Processes. This past emphasis on human aspects and innovation provides a strong foundation for the next PROLAMAT. Under the title: The globalization of manufacturing in the digital communications era of the 21th century: innovation, agility and the virtual enterprise, the 1998 conference expands the PROLAMAT scope to include teams and virtual enterprises which come together across space and time to develop new products and bring them to global markets. Manufacturing issues and information models have long been part of concurrent engineering; they are increasingly important in new product innovation and in the development of manufacturing plans and processes which span multiple companies along with multiple time zones.
Download or read book Data Communications and Networking for Manufacturing Industries written by Dario J. Toncich and published by Dario Toncich. This book was released on 1993 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Software Engineering for Manufacturing Systems written by A. Storr and published by Springer Science & Business Media. This book was released on 1996-09-30 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software has become a decisive cost and time factor in regard to developing and establishing manufacturing systems and setting them into operation. In addition, software determines the availability, reliability as well as functionality of manufacturing units. Software Engineering for Manufacturing Systems considers the methods and procedures required to deal with problems in the software engineering of control technology for manufacturing systems. Significantly, the following topics are addressed: * definitions and requirements of software for control technology * system design, describing forms of control software * CASE tools for the generation of a code * configuration, adaption of standard software variants, and re-usability of software * and man-machine interface. It contains the selected proceedings of the International Conference on Software Engineering and Case Tools for Control Technology of Manufacturing Systems, sponsored by the IFIP and held in Germany, in March 1996.
Download or read book MMS A Communication Language for Manufacturing written by Consortium CCE-CNMA and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's manufacturing environment is characterised by significant change in the way it is able to respond to its business objectives. Companies now face new challenges to meet customer demands including greater flexibility, a wider range of products, higher quality, improved lead time, whilst maintaining _c.ompetitive prices. The changes manifest in each company will differ but, the trend is towards providing a leaner, more responsive organisation. This is reflected in the need for Information Technology (IT) systems to be more integrated across an enterprise and for the systems to be provided on a distributed basis. At the same time it is imperative that the costs associated with these IT systems and the range of skills required by an enterprise to develop and support such systems should be minimal. One way of achieving this objective is to adopt the use of standards. During recent years there has been a lot of activity to standardise the way that manufacturing devices communicate with each other. Considerable progress has been made, thanks not least to the success of the international effort of stand ardisation bodies like ISO, IEEE and IEC, and projects applying standardised protocols like Manufacturing Automation Protocol (MAP), in the USA, Commun ications Network for Manufacturing Applications (CNMA) in Europe and not forgetting Mini-MAP and Fieldbus technology.
Download or read book Unleashing the Power of 5GtoB in Industries written by Pengfei Sun and published by Springer Nature. This book was released on 2021-10-07 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will delve into how new ICTs, represented by 5G, collectively empower industries from the perspective of theories and practices. 5G is integrating with cloud, intelligence, big data, and applications to push the boundaries of industries and diversify industrial services. Starting from the background and value of industry digitalization, Section I introduces the new ICT infrastructure for industry digitalization, as well as a new support system based on this infrastructure to enable 5GtoB to bring new value to industries. Section II summarizes the success factors and four key capabilities for achieving 5GtoB success from methodological perspective. Abundant application cases are provided in Section III to explore the adoption of 5GtoB in key enterprises across industries, as well as the benefits brought to these enterprises. The final section analyzes the future evolution and applications of 5GtoB. 5G enables a plethora of possibilities. We believe that this book will inspire everyone in the 5GtoB industry chain to embrace 5GtoB and take the digital transformation of industries to new heights.
Download or read book Control Through Communication written by JoAnne Yates and published by JHU Press. This book was released on 1993-03 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: A superb historical analysis of the philosophical and technological forces that led to the development of communication genres and processes in the modern American corporation.
Download or read book Manufacturing Government Communication on Covid 19 written by Philippe J. Maarek and published by Springer Nature. This book was released on 2022-09-10 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comparative perspective on different government communication strategies to COVID-19 around the globe. Scholars from twenty parts of the world specialized in political and government communication analyze initiatives and methods of various governments' communicative responses to the pandemic. In their contributions to this volume, they examine a wide range of distinct attitudes and reactions facing the crisis. Today’s omnidirectional contact allowed by social media, with its load of contradictory rumors and fake news, often obliterates the citizens' ability to comprehend reality. The book frames a broad canvas on how government communication may deal with that and manage similar crises — bound to happen as climate changes and war menaces are generating more and more worries about the future of humanity. This makes this volume a must-read for scholars and students of political communication, health policies and communication, crisis marketing and communication. It will also be of utmost interest for practitioners and policy-makers from these fields willing to better understand government communication and its answer to global crises.
Download or read book Manufacturing Consent written by Edward S. Herman and published by Pantheon. This book was released on 2011-07-06 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: A "compelling indictment of the news media's role in covering up errors and deceptions" (The New York Times Book Review) due to the underlying economics of publishing—from famed scholars Edward S. Herman and Noam Chomsky. With a new introduction. In this pathbreaking work, Edward S. Herman and Noam Chomsky show that, contrary to the usual image of the news media as cantankerous, obstinate, and ubiquitous in their search for truth and defense of justice, in their actual practice they defend the economic, social, and political agendas of the privileged groups that dominate domestic society, the state, and the global order. Based on a series of case studies—including the media’s dichotomous treatment of “worthy” versus “unworthy” victims, “legitimizing” and “meaningless” Third World elections, and devastating critiques of media coverage of the U.S. wars against Indochina—Herman and Chomsky draw on decades of criticism and research to propose a Propaganda Model to explain the media’s behavior and performance. Their new introduction updates the Propaganda Model and the earlier case studies, and it discusses several other applications. These include the manner in which the media covered the passage of the North American Free Trade Agreement and subsequent Mexican financial meltdown of 1994-1995, the media’s handling of the protests against the World Trade Organization, World Bank, and International Monetary Fund in 1999 and 2000, and the media’s treatment of the chemical industry and its regulation. What emerges from this work is a powerful assessment of how propagandistic the U.S. mass media are, how they systematically fail to live up to their self-image as providers of the kind of information that people need to make sense of the world, and how we can understand their function in a radically new way.
Download or read book Agile Manufacturing written by A. Gunasekaran and published by Elsevier. This book was released on 2001-01-25 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agile manufacturing is defined as the capability of surviving and prospering in a competitive environment of continuous and unpredictable change by reacting quickly and effectively to changing markets, driven by customer-designed products and services. Critical to successfully accomplishing AM are a few enabling technologies such as the standard for the exchange of products (STEP), concurrent engineering, virtual manufacturing, component-based hierarchical shop floor control system, information and communication infrastructure, etc.The scope of the book is to present the undergraduate and graduate students, senior managers and researchers in manufacturing systems design and management, industrial engineering and information technology with the conceptual and theoretical basis for the design and implementation of AMS. Also, the book focuses on broad policy directives and plans of agile manufacturing that guide the monitoring and evaluating the manufacturing strategies and their performance. A problem solving approach is taken throughout the book, emphasizing the context of agile manufacturing and the complexities to be addressed.
Download or read book Communication Practices in Engineering Manufacturing and Research for Food and Water Safety written by David Wright and published by John Wiley & Sons. This book was released on 2015-09-08 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates some of the ways in which communication and developing technologies can improve global food and water safety by providing a historical background on outbreaks and public resistance, as well as generating interest in youth and potential professionals in the field History of muckraking in the food industry Case study on groundwater regulation Interviews with members of the beef industry and livestock market owners
Download or read book Information Technology for Manufacturing written by National Research Council and published by National Academies Press. This book was released on 1995-02-27 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a vision of manufacturing in the twenty-first century that maximizes efficiencies and improvements by exploiting the full power of information and provides a research agenda for information technology and manufacturing that is necessary for success in achieving such a vision. Research on information technology to support product and process design, shop-floor operations, and flexible manufacturing is described. Roles for virtual manufacturing and the information infrastructure are also addressed. A final chapter is devoted to nontechnical research issues.
Download or read book Essentials of Business Communication written by Mary Ellen Guffey and published by South Western Educational Publishing. This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text-workbook is a streamlined, no-nonsense approach to business communication. It takes a three-in-one approach: (1) text, (2) practical workbook, and (3) self-teaching grammar/mechanics handbook. The chapters reinforce basic writing skills, then apply these skills to a variety of memos, letters, reports, and resumes. This new edition features increased coverage of contemporary business communication issues including oral communication, electronic forms of communication, diversity and ethics.
Download or read book Smart Brevity written by Jim VandeHei and published by Workman Publishing Company. This book was released on 2022-09-20 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brevity is confidence. Length is fear. This is the guiding principle of Smart Brevity, a communication formula built by Axios journalists to prioritize essential news and information, explain its impact and deliver it in a concise and visual format. Now, the co-founders of Axios have created an essential guide for communicating effectively and efficiently using Smart Brevity—think Strunk and White’s Elements of Style for the digital age. In SMART BREVITY: The Power of Saying More with Less, Axios co-founders Jim VandeHei, Mike Allen, and Roy Schwartz teach readers how to say more with less in virtually any format. They also share communications lessons learned from their decades of experience in media, business and communications.
Download or read book Code of Federal Regulations written by and published by . This book was released on 2008 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special edition of the Federal register, containing a codification of documents of general applicability and future effect as of ... with ancillaries.
Download or read book Communication Networks for Manufacturing written by Juan R. Pimentel and published by . This book was released on 1990 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.
