Download or read book L talonnage des robots manipulateurs industriels written by MAURINE Patrick and published by Lavoisier. This book was released on 2013-03-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fruit d’une étroite collaboration entre la recherche universitaire et le monde de l’industrie, cet ouvrage traite de la robotique industrielle, et tout particulièrement de l’étalonnage des robots manipulateurs. Il développe les aspects suivants : la représentation des structures des robots manipulateurs sériels et parallèles ; les principes généraux de l’étalonnage ; les méthodes d’étalonnage spécifiques aux robots sériels et parallèles ; l’innovation en robotique, ses réussites et ses échecs. Théorique et pragmatique, il s’adresse aux étudiants et aux chercheurs, aux techniciens et aux ingénieurs et à tous ceux qui désirent appréhender la robotique industrielle. Patrick Maurine est maître de conférences à l’INSA de Rennes. Ses travaux portent sur la précision et l’étalonnage des robots manipulateurs industriels. Jean-François Quinet est consultant en robotique appliquée à l’ensemble de l’industrie internationale depuis 1973. Ses activités portent aussi sur la mesure tridimensionnelle statique et dynamique.
Download or read book Robot Manipulators written by Etienne Dombre and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent research results on modeling and control of robot manipulators. Chapter 1 gives unified tools to derive direct and inverse geometric, kinematic and dynamic models of serial robots and addresses the issue of identification of the geometric and dynamic parameters of these models. Chapter 2 describes the main features of serial robots, the different architectures and the methods used to obtain direct and inverse geometric, kinematic and dynamic models, paying special attention to singularity analysis. Chapter 3 introduces global and local tools for performance analysis of serial robots. Chapter 4 presents an original optimization technique for point-to-point trajectory generation accounting for robot dynamics. Chapter 5 presents standard control techniques in the joint space and task space for free motion (PID, computed torque, adaptive dynamic control and variable structure control) and constrained motion (compliant force-position control). In Chapter 6, the concept of vision-based control is developed and Chapter 7 is devoted to specific issue of robots with flexible links. Efficient recursive Newton-Euler algorithms for both inverse and direct modeling are presented, as well as control methods ensuring position setting and vibration damping.
Download or read book Modeling Identification and Control of Robots written by W. Khalil and published by Butterworth-Heinemann. This book was released on 2004-07-01 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by two of Europe's leading robotics experts, this book provides the tools for a unified approach to the modelling of robotic manipulators, whatever their mechanical structure. No other publication covers the three fundamental issues of robotics: modelling, identification and control. It covers the development of various mathematical models required for the control and simulation of robots.·World class authority·Unique range of coverage not available in any other book·Provides a complete course on robotic control at an undergraduate and graduate level
Download or read book Robotique flexible Manipulation multi chelle written by GROSSARD Mathieu and published by Lavoisier. This book was released on 2013-07-01 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Qu’il s’agisse de tâches de préhension versatile aux échelles du micromonde ou bien de tâches de manipulation fine ou dextre à une échelle dimensionnelle supérieure, la fonction de manipulation robotique nécessite l’utilisation de systèmes mécatroniques performants et précis. Dans la majorité des cas, ceux-ci mettent en jeu des mécanismes qui sont caractérisés par des phénomènes mécaniques de flexibilité. Ces phénomènes sont induits naturellement par l’emploi de certains composants technologiques constitutifs du système ou par la géométrie de certaines structures élancées. Il peut alors s’agir de micromanipulateurs à base de matériaux actifs, de bras manipulateurs légers, d’organes terminaux de préhension très intégrés sur le plan fonctionnel, voire de manipulateurs d’inspiration anthropomorphe. Aperçu des dernières avancées scientifiques et technologiques en la matière, cet ouvrage est destiné à toute personne intéressée par le champ de la robotique flexible et plus particulièrement par la manipulation.
Download or read book Modeling Identification and Control of Robots written by Wisama Khalil and published by CRC Press. This book was released on 2002 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory and Practice of Robots and Manipulators written by A. Morecki and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: The RO MAN SY Symposia have played an important role in the development of the theory and, to a lesser extent, the practice of manipulators, walking machines and robots. Based on past experience of previous symposia, which have been held over the last 10 years, the problem arose as to what to do in the future. In other words, in what direction should further symposia be organized? A panel discussion called 'Role of RO MAN SY Symposia' was held on 29 June 1984 during the final plenary session at CISM, Udine, Italy. The Members of the Organizing Committee, Professors Konstantinov, Morecki, Roth, Vukobratovic and Vertut, and other participants were asked to give their opinions on the follow ing important questions: • should we organize future symposia? if we continue, which form should we choose?: small (60-70 participants, • 35-40 invited papers); big (100-150 participants, 60-80 papers) • what kind of topics should be included?: the more theoretical-oriented; more practical-oriented; both (what proportion?) • how frequently should RO MAN SY Symposia be organized?: every other year; every third year is working well and what should be maintained? • what • what is not working well and what should be changed to increase the impact of the symposia? would like to underline that most of the participants agree that we should con tinue to hold our symposia every other year, but to limit their small form, with invited papers at high theoretical level only in mechanics, control of motion,
Download or read book Expert Systems and Robotics written by Timothy Jordanides and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: The areas of intelligent machines or robotic systems is of enormous technological and economic interest as competition in productivity intensifies. This volume gives the proceedings of the 1990 Advanced Study Institute on Expert Systems and Robotics. It presents research work already accomplished in the analytical theory of intelligent machines, work in progress and of current interest and some specific examples for further research. The papers in the volume range from the most theoretical to some descriptions of very practical working robots. The papers are organized into sections on vision and image analysis, robotic sensory systems, software/hardware and system simulation, robot control, applications, and reports of group meetings.
Download or read book Microrobotics for Micromanipulation written by Nicolas Chaillet and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microrobotics is an emerging and booming area with many and various applications, including in fields such as industrial/manufacturing robotics, medical robotics, and laboratory instrumentation. Microrobotics for Micromanipulation presents for the first time, in detail, a treatment of the field of robotics dedicated to handling objects of micrometer dimensions. At these dimensions, the behavior of objects is significantly different from the better known, larger scales, which leads to implementation techniques that can be radically different from the more commonly used solutions. This book details the behaviors of objects at the micrometer scale and provides robotics solutions that are suitable, in terms of actuators, grippers, manipulators, environmental perception, and microtechnology. Worked examples are included in the book - enabling engineers, students and researchers to familiarize themselves with this emerging area and to contribute to its development.
Download or read book Recent Advances in Robot Kinematics written by Jadran Lenarčič and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: The articles of this book were reported and discussed at the fifth international symposium on Advances in Robot Kinematics. As is known, the first symposium of this series was organised in 1988 in Ljubljana. The following meetings took place every other year in Austria, Italy, and Slovenia (Linz, Ferrara, Ljubljana, Portoroz Bernardin). It must be emphasised that the symposia run under the patronage of the International Federation for the Theory of Machinesand Mechanisms, IFToMM. In this period, Advances in Robot Kinematics has been able to attract the most outstanding authors in the area and also to create an optimum combination of a scientific pragmatism and a friendly atmosphere. Hence, it has managed to survive in a strong competition of many international conferences and meetings. In the most ancient way, robot kinematics is regarded as an application of the kinematics of rigid hodies. However, there are topics and problems that are typical for robot kinematics that cannot easily be found in any other scientific field. It is our belief that the initiative of Advances in Robot Kinematics has contributed to develop a remarkable scientific community. The present book is of interest to researchers, doctoral students and teachers, engineers and mathematicians specialising in kinematics of robots and mechanisms, mathematical modelling, simulation, design, and control of robots.
Download or read book Kinematic and Dynamic Issues in Sensor Based Control written by Gaynor E. Taylor and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a series of papers originally presented at a NATO Advanced Research Workshop (ARW) entitled Kinematic and Dynamic Issues in Sensor Based Control. The workshop, one of a series concerned with topics in sensory robotics, took place at II Ciocco, Castelvecchio di Pascoli, Italy in October 1987. Attendance was by invitation only and the majority of participants are recognised leaders in their field- some from the robotics community, others with a more general control background. The main topics of interest were grouped into eight sessions represented by the eight main sections of the book: 1: Modelling Techniques: General Kinematic and Dynamic Issues 2: Sensor Signal Processing 3: Force Control 4: Further Control Topics 5: Vision Based Control 6: Further Kinematic and Dynamic Issues 7: Computational Issues 8: Learning from Sensor Input Also included are brief reports of the roundtable discussions which sought to determine important future directions of research in this area. My thanks to all those who made the workshop possible: The NATO Scientific Affairs Division and the panel on Sensory Systems for Robotic Control who provided most of the financial support; the workshop committee, Dr. B. Espiau, Dr. P. Coiffet, Dr. P.
Download or read book Geometric Reasoning for Perception and Action written by Christian Laugier and published by Springer Science & Business Media. This book was released on 1993-08-30 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geometry is a powerful tool to solve a great number of problems in robotics and computer vision. Impressive results have been obtained in these fields in the last decade. It is a new challenge to solve problems of the actual world which require the ability to reason about uncertainty and complex motion constraints by combining geometric, kinematic, and dynamic characteristics. A necessary step is to develop appropriate geometric reasoning techniques with reasonable computational complexity. This volume is based on a workshop held in Grenoble, France,in September 1991. It contains selected contributions on several important areas in the field of robotics and computer vision. The four chapters cover the following areas: - motion planning with kinematic and dynamic constraints, - motion planning and control in the presence of uncertainty, - geometric problems related to visual perception, -numerical problems linked to the implementation of practical algorithms for visual perception.
Download or read book Design and Control Advances in Robotics written by Mellal, Mohamed Arezk and published by IGI Global. This book was released on 2022-09-16 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robotics plays a pivotal role in many domains such as industry and medicine. Robots allow for increased safety, production rates, accuracy, and quality; however, robots must be well designed and controlled to achieve the required performance. The design and control of robotics involve many varying disciplines, such as mechanical engineering, electronics, and automation, and must be further studied to ensure the technology is utilized appropriately. Design and Control Advances in Robotics considers the most recent applications and design advances in robotics and highlights the latest developments and applications within the field of robotics. Covering key topics such as deep learning, machine learning, programming, automation, and control advances, this reference work is ideal for engineers, computer scientists, industry professionals, academicians, practitioners, scholars, researchers, instructors, and students.
Download or read book Modelling and Control in Biomedical Systems 2006 written by David Dagan Feng and published by Elsevier. This book was released on 2006-09-19 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling and Control in Biomedical Systems (including Biological Systems) was held in Reims, France, 20-22 August 2006. This Symposium was organised by the University of Reims Champagne Ardenne and the Société de l’Electricité, de l’Electronique et des TIC (SEE). The Symposium attracted practitioners in engineering, information technology, mathematics, medicine and biology, and other related disciplines, with authors from 24 countries. Besides the abstracts of the four plenary lectures, this volume contains the 92 papers that were presented by their authors at the Symposium. The papers included two invited keynote presentations given by internationally prominent and well-recognised research leaders: Claudio Cobelli, whose talk is titled "Dynamic modelling in diabetes: from whole body to genes"; and Irving J. Bigio, whose talk is titled "Elastic scattering spectroscopy for non-invasive detection of cancer". Two prestigious industrial speakers were also invited to give keynote presentations: Terry O'Brien from LIDCO, whose talk is titled "LIDCO: From the laboratory to protocolized goal directed therapy"; and Lorenzo Quinzio of Philips, whose talk is titled "Clinical decision support in monitoring and information systems". A valuable source of information on the state-of- the-art in Modelling and Control in Biomedical Systems Including abstracts of four plenary lectures, and 92 papers presented by their authors
Download or read book Computing Techniques for Robots written by Igor Aleksander and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: I. ALEKSANDER Kobler Unit for Information Technology Management, Imperial College of Science and Technology, London, England It is now over half a decade since Joseph Engelberger wrote: 'Given a six-articulation arm of any configuration, software can be powerful enough to think only in tool coordinates. That is, a programmer concerns himself only with the tool on the end of the robot arm. He can think of the tool's frame of reference and com puter subroutines automatically make the various articulations move so as to accomplish the desired tool manipulation. ' As is often the case with statements of this kind, they are appealing and generally well-founded in technological feasibility. But in order to turn the prediction into reality it requires the dedication and in ventiveness of an international community of researchers. The object of this book is to provide a window on to some of the advances made by this community which go towards the fulfilment of Engelberger's predictions. A significant factor in the framework within which this work is being pursued is the phenomenal advance in the availability of inex pensive and highly compact computing power. It becomes increas ingly possible to imagine powerful microprocessors providing local intelligence at key points in a robot arm Uoints, gripper, etc) by being connected through a communications network and controlled by some specially designated supervisory microchip.
Download or read book Applied Dynamics of Manipulation Robots written by Miomir Vukobratovic and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the period 1982-1985, six books of the series: Scientific Fun damentals of Robotics were published by Springer-Verlag. In chronolo gical order these were: Dynamics of Manipulation Robots: Theory and Application, by M. Vukobra tovic and V. Potkonjak, Control of Manipulation Robots: Theory and Ap plication, by M. vukobratovic and D. Stokic, Kinematics and Trajectory Synthesis of Manipulation Robots, by M. Vukobratovic and H. Kircanski, Real-Time Dynamics of Hanipulation Robots by M. Vukobratovic and N. Kircanski, Non-Adaptive and Adaptive Control of Manipulation Robots, by M. Vukobratovic, D. Stokic and N. Kircanski and Computer-Aided De sign and Applied Dynamics of Manipulation Robots, by M. Vukobratovic and V. Potkonjak. Within the series, during 1989, two monographs dealing with new sub jects will be published. So far, amongst the published monographs, Vol. 1 has been translated into Japanese, Volumes 2 and 5 into Russian, and Volumes 1-6 will appear in Chinese and Hungarian. In the author's opinion, the afore mentioned monographs, in principle, cover with sufficient breadth, the topics devoted to the design of ro bots and their control systems, at the level of post-graduate study in robotics. However, if this material was also to apply to the study of robotics at under-graduate level, it would have to be modified so as to obtain the character of a textbook. With this in mind, it must be noted that the subject matter contained in the text cannot be simpli fied but can only be elaborated in more detail.
Download or read book Proceedings of the International Symposium on Industrial Robots written by and published by . This book was released on 1989 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis and Design of Biological Materials and Structures written by Andreas Öchsner and published by Springer Science & Business Media. This book was released on 2012-01-04 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection provides researchers and scientists with advanced analyses and materials design techniques in Biomaterials and presents mechanical studies of biological structures. In 16 contributions well known experts present their research on Stress and Strain Analysis, Material Properties, Fluid and Gas mechanics and they show related problems.
