Download or read book Vector Control of Induction Machines written by Benoît Robyns and published by Springer Science & Business Media. This book was released on 2012-02-04 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a brief introduction to the main law of physics and fundamental concepts inherent in electromechanical conversion, Vector Control of Induction Machines introduces the standard mathematical models for induction machines – whichever rotor technology is used – as well as several squirrel-cage induction machine vector-control strategies. The use of causal ordering graphs allows systematization of the design stage, as well as standardization of the structure of control devices. Vector Control of Induction Machines suggests a unique approach aimed at reducing parameter sensitivity for vector controls based on a theoretical analysis of this sensitivity. This analysis naturally leads to the introduction of control strategies that are based on the combination of different controls with different robustness properties, through the use of fuzzy logic supervisors. Numerous applications and experiments confirm the validity of this simple solution, which is both reproducible and applicable to other complex systems. Vector Control of Induction Machines is written for researchers and postgraduate students in electrical engineering and motor drive design.

Download or read book Induction Motors Recent Advances New Perspectives and Applications written by Adel El-Shahat and published by BoD – Books on Demand. This book was released on 2023-09-13 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The induction motor is one of the most significant innovations in contemporary history and it officially kicked off the Second Industrial Revolution by significantly enhancing energy generation efficiency. Induction motors are utilized in a wide variety of applications in the modern industrial world. Motivated by the importance of recent advances, new perspectives, and applications of induction motors, this book presents research from distinguished experts in the field. It addresses recent advances in induction motors, optimal solutions in field-oriented control, the association of converters to induction motors, dynamic analysis, optimized design of synergetic control, fault-tolerant control, mathematical modeling, an adaptive system scheme for a sensorless drive, modeling, and simulation of a system with inter-turn faults, sensorless speed observer for industrial drives, and induction motor applications in electric vehicles. This book is useful for undergraduates, graduate students, researchers, professors, and field engineers due to its combination of both theoretical coverage and real-world application concepts.

Download or read book Power Electronic Converters written by Eric Monmasson and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: A voltage converter changes the voltage of an electrical power source and is usually combined with other components to create a power supply. This title is devoted to the control of static converters, which deals with pulse-width modulation (PWM) techniques, and also discusses methods for current control. Various application cases are treated. The book is ideal for professionals in power engineering, power electronics, and electric drives industries, as well as practicing engineers, university professors, postdoctoral fellows, and graduate students.

Download or read book Electrical Machines Diagnosis written by Jean-Claude Trigeassou and published by John Wiley & Sons. This book was released on 2013-02-07 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monitoring and diagnosis of electrical machine faults is a scientific and economic issue which is motivated by objectives for reliability and serviceability in electrical drives. This book provides a survey of the techniques used to detect the faults occurring in electrical drives: electrical, thermal and mechanical faults of the electrical machine, faults of the static converter and faults of the energy storage unit. Diagnosis of faults occurring in electrical drives is an essential part of a global monitoring system used to improve reliability and serviceability. This diagnosis is performed with a large variety of techniques: parameter estimation, state observation, Kalman filtering, spectral analysis, neural networks, fuzzy logic, artificial intelligence, etc. Particular emphasis in this book is put on the modeling of the electrical machine in faulty situations. Electrical Machines Diagnosis presents original results obtained mainly by French researchers in different domains. It will be useful as a guideline for the conception of more robust electrical machines and indeed for engineers who have to monitor and maintain electrical drives. As the monitoring and diagnosis of electrical machines is still an open domain, this book will also be very useful to researchers.

Download or read book Direct Eigen Control for Induction Machines and Synchronous Motors written by Jean Claude Alacoque and published by John Wiley & Sons. This book was released on 2012-10-09 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clear presentation of a new control process applied to induction machine (IM), surface mounted permanent magnet synchronous motor (SMPM-SM) and interior permanent magnet synchronous motor (IPM-SM) Direct Eigen Control for Induction Machines and Synchronous Motors provides a clear and consise explanation of a new method in alternating current (AC) motor control. Unlike similar books on the market, it does not present various control algorithms for each type of AC motor but explains one method designed to control all AC motor types: Induction Machine (IM), Surface Mounted Permanent Magnet Synchronous Motor (SMPM-SM) (i.e. Brushless) and Interior Permanent Magnet Synchronous Motor (IPM-SM). This totally new control method can be used not only for AC motor control but also to control input filter current and voltage of an inverter feeding an AC motor. Accessible and clear, describes a new fast type of motor control applied to induction machine (IM), surface mounted permanent magnet synchronous motor (SM-PMSM) and interior permanent magnet synchronous motor (I-PMSM) with various examples Summarizes a method that supersedes the two known direct control solutions – Direct Self Control and Direct Torque Control – to be used for AC motor control and to control input filter current and voltage of an inverter feeding an AC motor Presents comprehensive simulations that are easy for the reader to reproduce on a computer. A control program is hosted on a companion website This book is straight-forward with clear mathematical description. It presents simulations in a way that is easy to understand and to reproduce on a computer, whilst omitting details of practical hardware implementation of control, in order for the main theory to take focus. The book remains concise by leaving out description of sensorless controls for all motor types. The sections on “Control Process”, “Real Time Implementation” and “Kalman Filter Observer and Prediction” in the introductory chapters explain how to practically implement, in real time, the discretized control with all three types of AC motors. In order, this book describes induction machine, SMPM-SM, IPM-SM, and, application to LC filter limitations. The appendixes present: PWM vector calculations; transfer matrix calculation; transfer matrix inversion; Eigen state space vector calculation; and, transition and command matrix calculation. Essential reading for Researchers in the field of drive control; graduate and post-graduate students studying electric machines; electric engineers in the field of railways, electric cars, plane surface control, military applications. The approach is also valuable for Engineers in the field of machine tools, robots and rolling mills.

Download or read book Electrical Actuators written by Bernard de Fornel and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The different chapters of this book cover a large range of information regarding electrical actuators, including: synchronous and asynchronous machine modeling in order to measure and identify offline and online parameters using modern optimization methods; identification in real time of parameters with Luenberger filter and the extended Kalman filter; estimation of non-measurable variables, first by linear estimates and observers, then by lower observers. Robustness is a very problematic issue, as well, which is fully explored in a chapter dedicated to the subject. Finally, the estimate of non-measurable mechanical variables is particularly dealt with: estimate of load moment, then observation of the positioning of a command without mechanical sensor. The conditions to measure variables and real implementation of numerical algorithms are also examined with particular attention.

Download or read book Control of Non conventional Synchronous Motors written by Jean-Paul Louis and published by John Wiley & Sons. This book was released on 2013-02-04 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classical synchronous motors are the most effective device to drive industrial production systems and robots with precision and rapidity. However, numerous applications require efficient controls in non-conventional situations. Firstly, this is the case with synchronous motors supplied by thyristor line-commutated inverters, or with synchronous motors with faults on one or several phases. Secondly, many drive systems use non-conventional motors such as polyphase (more than three phases) synchronous motors, synchronous motors with double excitation, permanent magnet linear synchronous motors, synchronous and switched reluctance motors, stepping motors and piezoelectric motors. This book presents efficient controls to improve the use of these non-conventional motors. Contents 1. Self-controlled Synchronous Motor: Principles of Function and Simplified Control Model, Francis Labrique and François Baudart. 2. Self-controlled Synchronous Motor: Dynamic Model Including the Behavior of Damper Windings and Commutation Overlap, Ernest Matagne. 3. Synchronous Machines in Degraded Mode, Damien Flieller, Ngac Ky Nguyen, Hervé Schwab and Guy Sturtzer. 4. Control of the Double-star Synchronous Machine Supplied by PWM Inverters, Mohamed Fouad Benkhoris. 5. Vectorial Modeling and Control of Multiphase Machines with Non-salient Poles Supplied by an Inverter, Xavier Kestelyn and Éric Semail. 6. Hybrid Excitation Synchronous Machines, Nicolas Patin and Lionel Vido. 7. Advanced Control of the Linear Synchronous Motor, Ghislain Remy and Pierre-Jean Barre. 8. Variable Reluctance Machines: Modeling and Control, Mickael Hilairet, Thierry Lubin and Abdelmounaïm Tounzi. 9. Control of the Stepping Motor, Bruno Robert and Moez Feki . 10. Control of Piezoelectric Actuators, Frédéric Giraud and Betty Lemaire-Semail.

Download or read book Control of Synchronous Motors written by Jean-Paul Louis and published by John Wiley & Sons. This book was released on 2013-02-07 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synchronous motors are indubitably the most effective device to drive industrial production systems and robots with precision and rapidity. Their control law is thus critical for combining at the same time high productivity to reduced energy consummation. As far as possible, the control algorithms must exploit the properties of these actuators. Therefore, this work draws on well adapted models resulting from the Park’s transformation, for both the most traditional machines with sinusoidal field distribution and for machines with non-sinusoidal field distribution which are more and more used in industry. Both, conventional control strategies like vector control (either in the synchronous reference frame or in the rotor frame) and advanced control theories like direct control and predictive control are thoroughly presented. In this context, a significant place is reserved to sensorless control which is an important and critical issue in tomorrow’s motors.

Download or read book Handbook of Asynchronous Machines with Variable Speed written by Hubert Razik and published by John Wiley & Sons. This book was released on 2013-01-24 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook deals with the asynchronous machine in its close environment. It was born from a reflection on this electromagnetic converter whose integration in industrial environments takes a wide part. Previously this type of motor operated at fixed speed, from now on it has been integrated more and more in processes at variable speed. For this reason it seemed useful, or necessary, to write a handbook on the various aspects from the motor in itself, via the control and while finishing by the diagnosis aspect. Indeed, an asynchronous motor is used nowadays in industry where variation speed and reliability are necessary. We must know permanently for the sensitive systems, the state of process and to inform the operator of the appearance of any anomaly and its severity.

Download or read book Control Methods for Electrical Machines written by Rene Husson and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: The type of control system used for electrical machines depends on the use (nature of the load, operating states, etc.) to which the machine will be put. The precise type of use determines the control laws which apply. Mechanics are also very important, because they affect performance. Another factor of essential importance in industrial applications is operating safety. Finally, the problem of how to control a number of different machines, whose interactions and outputs must be coordinated, is addressed and solutions are presented. These and other issues are addressed here by a range of expert contributors, each of whom are specialists in their particular field. This book is primarily aimed at those involved in complex systems design, but engineers in a range of related fields such as electrical engineering, instrumentation and control, and industrial engineering, will also find this a useful source of information.

Download or read book Conception syst mique pour la conversion d nergie lectrique 1 gestion analyse et synth se written by ROBOAM Xavier and published by Lavoisier. This book was released on 2012-11-06 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Le contexte actuel mène les concepteurs vers des systèmes toujours plus complexes et performants, intégrant un grand nombre d’éléments souvent fortement couplés et appartenant à divers champs de la physique énergétique. Après une présentation de l’approche systémique de conception, ce premier volume rassemble les points-clés permettant de modéliser et de caractériser efficacement des systèmes multiphysiques (formalismes graphiques, Bond Graphs, GIC/REM), d’analyser la qualité et la stabilité des réseaux et de contribuer à la robustesse en conception intégrée. La gestion de l’énergie des systèmes énergétiques hybrides incluant du stockage est également largement détaillée et différentes méthodes statistiques permettant de dimensionner les réseaux ou de caractériser leur sûreté de fonctionnement sont proposées (par exemple, la méthode de Monte-Carlo). Les techniques d’analyse, de synthèse et de gestion présentées dans cet ouvrage participent à l’optimisation des systèmes énergétiques. Elles sont complétées par des approches spécifiquement orientées vers la conception par optimisation, objets du second volume.

Download or read book European Control Conference 1991 written by and published by European Control Association. This book was released on 1991-07-02 with total page 1012 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the European Control Conference 1991, July 2-5, 1991, Grenoble, France

Download or read book Proceedings of the 1st International Conference on Smart Innovation Ergonomics and Applied Human Factors SEAHF written by César Benavente-Peces and published by Springer. This book was released on 2019-06-20 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses a range of real-world issues including industrial activity, energy management, education, business and health. Today, technology is a part of virtually every human activity, and is used to support, monitor and manage equipment, facilities, commodities, industry, business, and individuals’ health, among others. As technology evolves, new applications, methods and techniques arise, while at the same time citizens’ expectations from technology continue to grow. In order to meet the nearly insatiable demand for new applications, better performance and higher reliability, trustworthiness, security, and power consumption efficiency, engineers must deliver smart innovations, i.e., must develop the best techniques, technologies and services in a way that respects human beings and the environment. With that goal in mind, the key topics addressed in this book are: smart technologies and artificial intelligence, green energy systems, aerospace engineering/robotics and IT, information security and mobile engineering, IT in bio-medical engineering and smart agronomy, smart marketing, management and tourism policy, technology and education, and hydrogen and fuel-cell energy technologies.

Download or read book Systemic Design Methodologies for Electrical Energy Systems written by Xavier Roboam and published by John Wiley & Sons. This book was released on 2012-12-17 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes systemic design methodologies applied to electrical energy systems, in particular analysis and system management, modeling and sizing tools. It includes 8 chapters: after an introduction to the systemic approach (history, basics & fundamental issues, index terms) for designing energy systems, this book presents two different graphical formalisms especially dedicated to multidisciplinary devices modeling, synthesis and analysis: Bond Graph and COG/EMR. Other systemic analysis approaches for quality and stability of systems, as well as for safety and robustness analysis tools are also proposed. One chapter is dedicated to energy management and another is focused on Monte Carlo algorithms for electrical systems and networks sizing. The aim of this book is to summarize design methodologies based in particular on a systemic viewpoint, by considering the system as a whole. These methods and tools are proposed by the most important French research laboratories, which have many scientific partnerships with other European and international research institutions. Scientists and engineers in the field of electrical engineering, especially teachers/researchers because of the focus on methodological issues, will find this book extremely useful, as will PhD and Masters students in this field.

Download or read book Advances in Green Energies and Materials Technology written by Younes Chiba and published by Springer Nature. This book was released on 2021-06-09 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected articles from the Algerian Symposium on Renewable Energy and Materials (ASREM-2020) held at Médéa, Algeria. It highlights the latest advances in the field of green energies and material technology with specific accentuation on numerical plans and recent methodologies designed to solve engineering problems. It includes mathematical models and experimental measurements to study different problems in renewable energy and materials characterization, with contributions from experts in both academia and industry, and presents a platform to further collaborations in this important area.

Download or read book Modeling of Turbomachines for Control and Diagnostic Applications written by Igor Loboda and published by BoD – Books on Demand. This book was released on 2020-05-27 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new studies in the area of turbomachine mathematical modeling with a focus on models applied to developing engine control and diagnostic systems. The book contains one introductory and four main chapters. The introductory chapter describes the area of modeling of gas and wind turbines and shows the demand for further improvement of the models. The first three main chapters offer particular improvements in gas turbine modeling. First, a novel methodology for the modeling of engine starting is presented. Second, a thorough theoretical comparative analysis is performed for the models of engine internal gas capacities, and practical recommendations are given on model applications, in particular for engine control purposes. Third, multiple algorithms for calculating important unmeasured parameters for engine diagnostics are proposed and compared. It is proven that the best algorithms allow accurate prognosis of engine remaining lifetime.The field of wind turbine modeling is presented in the last main chapter. It introduces a general-purpose model that describes both aerodynamic and electric parts of a wind power plant. Such a detailed physics-based model will help with the development of more accurate control and diagnostic systems.In this way, this book includes four new studies in the area of gas and wind turbine modeling. These studies will be interesting and useful for specialists in turbine engine control and diagnostics.

Download or read book Control in Power Electronics and Electrical Drives written by R. Zwicky and published by Elsevier. This book was released on 2014-06-28 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains 97 papers which provide a valuable overview of the latest technical innovations in this rapidly expanding field. Areas of development which receive particular attention include the emergence of power switching transistors, the application of microprocessors to regulation and control of static converters and electrical drives, the use of more sophisticated control strategies and the utilization of power electronics in new application fields.