Download or read book Gas Turbine Combustion written by Arthur H. Lefebvre and published by CRC Press. This book was released on 2010-04-26 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the developments in gas turbine combustion technology that have occurred in the last decade, Gas Turbine Combustion: Alternative Fuels and Emissions, Third Edition provides an up-to-date design manual and research reference on the design, manufacture, and operation of gas turbine combustors in applications ranging from aeronautical to po
Download or read book Gas Turbine Combustion written by Arthur H. Lefebvre and published by CRC Press. This book was released on 2010-04-26 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the developments in gas turbine combustion technology that have occurred in the last decade, Gas Turbine Combustion: Alternative Fuels and Emissions, Third Edition provides an up-to-date design manual and research reference on the design, manufacture, and operation of gas turbine combustors in applications ranging from aeronautical to power generation. Essentially self-contained, the book only requires a moderate amount of prior knowledge of physics and chemistry. In response to the fluctuating cost and environmental effects of petroleum fuel, this third edition includes a new chapter on alternative fuels. This chapter presents the physical and chemical properties of conventional (petroleum-based) liquid and gaseous fuels for gas turbines; reviews the properties of alternative (synthetic) fuels and conventional-alternative fuel blends; and describes the influence of these different fuels and their blends on combustor performance, design, and emissions. It also discusses the special requirements of aircraft fuels and the problems encountered with fuels for industrial gas turbines. In the updated chapter on emissions, the authors highlight the quest for higher fuel efficiency and reducing carbon dioxide emissions as well as the regulations involved. Continuing to offer detailed coverage of multifuel capabilities, flame flashback, high off-design combustion efficiency, and liner failure studies, this best-selling book is the premier guide to gas turbine combustion technology. This edition retains the style that made its predecessors so popular while updating the material to reflect the technology of the twenty-first century.
Download or read book Gas Turbine Emissions written by Timothy C. Lieuwen and published by Cambridge University Press. This book was released on 2013-07-08 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of clean, sustainable energy systems is a preeminent issue in our time. Gas turbines will continue to be important combustion-based energy conversion devices for many decades to come, used for aircraft propulsion, ground-based power generation, and mechanical-drive applications. This book compiles the key scientific and technological knowledge associated with gas turbine emissions into a single authoritative source.
Download or read book Combustion Fuels and Emissions written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Low Emission Flameless Combustion and Its Applications written by Seyed Ehsan Hosseini and published by Academic Press. This book was released on 2022-07-30 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Low Emission Flameless Combustion and Its Applications is a comprehensive reference on the flameless combustion mode and its industrial applications, considering various types of fossil and alternative fuel. Several experimental and numerical accomplishments on the fundamentals of state-of-the-art flameless combustion is presented, working to clarify the environmentally friendly aspects of this combustion mode. Author Dr. Hosseini presents the latest progresses in the field and highlights the most important achievements since invention, including the fundamentals of thermodynamics, heat transfer and chemical kinetics. Also analyzed is fuel consumption reduction and the efficiency of the system, emissions formation and the effect of the flameless mode on emission reduction.This book provides a solid foundation for those in industry employing flameless combustion for energy conservation and the mitigation of pollutant emissions. It will provide engineers and researchers in energy system engineering, chemical engineering, industrial engineers and environmental engineering with a reliable resource on flameless combustion and may also serve as a textbook for senior graduate students. Presents the fundamentals of flameless combustion and covers advances since its invention Includes experimental and numerical investigations of flameless combustion Analyzes emission formation and highlights the effects of the flameless mode on emission reduction
Download or read book Internal Combustion Engines written by Institution of Mechanical Engineers and published by Elsevier. This book was released on 2011-11-10 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers of the Internal Combustion Engines: Performance fuel economy and emissions conference, in the IMechE bi-annual series, held on the 29th and 30th November 2011. The internal combustion engine is produced in tens of millions per year for applications as the power unit of choice in transport and other sectors. It continues to meet both needs and challenges through improvements and innovations in technology and advances from the latest research. These papers set out to meet the challenges of internal combustion engines, which are greater than ever. How can engineers reduce both CO2 emissions and the dependence on oil-derivate fossil fuels? How will they meet the future, more stringent constraints on gaseous and particulate material emissions as set by EU, North American and Japanese regulations? How will technology developments enhance performance and shape the next generation of designs? This conference looks closely at developments for personal transport applications, though many of the drivers of change apply to light and heavy duty, on and off highway, transport and other sectors. Aimed at anyone with interests in the internal combustion engine and its challenges The papers consider key questions relating to the internal combustion engine
Download or read book Internal Combustion Engines written by Institution of Mechanical Engineers and published by Woodhead Publishing. This book was released on 2013-11-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the papers from the Internal Combustion Engines: Performance, fuel economy and emissions held in London, UK. This popular international conference from the Institution of Mechanical Engineers provides a forum for IC engine experts looking closely at developments for personal transport applications, though many of the drivers of change apply to light and heavy duty, on and off highway, transport and other sectors. These are exciting times to be working in the IC engine field. With the move towards downsizing, advances in FIE and alternative fuels, new engine architectures and the introduction of Euro 6 in 2014, there are plenty of challenges. The aim remains to reduce both CO2 emissions and the dependence on oil-derivate fossil fuels whilst meeting the future, more stringent constraints on gaseous and particulate material emissions as set by EU, North American and Japanese regulations. How will technology developments enhance performance and shape the next generation of designs? The book introduces compression and internal combustion engines' applications, followed by chapters on the challenges faced by alternative fuels and fuel delivery. The remaining chapters explore current improvements in combustion, pollution prevention strategies and data comparisons.
Download or read book Alternative Fuels written by Timothy J Maxwell and published by SAE International. This book was released on 1994-12-01 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written primarily for fleet management personnel with purchasing, maintenance, or operations responsibilities, Alternative Fuels: Emissions, Economics, and Performance provides essential information for those who are considering adding alternatively-fueled vehicles to their fleets. Readers will gain a solid understanding of the fundamentals of alternative fuels and the factors that need to be considered when evaluating their use. No prior knowledge of alternative fuels is necessary. Basic information on the various alternative fuels and objective data on the costs of converting, fueling, and operating alternatively-fueled vehicles is covered in this book. Fuel cost, performance, reliability, and availability are addressed. The book also discusses the 1990 amendments to the Clean Air Act and the 1992 Comprehensive National Energy Policy Act. A summary of Texas' state law, considered to be representative of state legislation on alternative fuels and a glossary of key terms, are also included. Eight chapters cover: Review of Engine Technology; Characteristics of Alternative Fuels; Conversion of Spark Ignition Engines; Conversion of Compression Ignition Engines; Refueling Facilities; Legislation and Policies; and Cost Considerations. The book is also an ideal introduction to the topic for legislators, administrators, educators, and anyone interested in learning more about alternate fuels.
Download or read book Engine Emission Control Technologies written by G. Amba Prasad Rao and published by CRC Press. This book was released on 2020-06-09 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume covers the important issues related to environmental emissions from SI and CI engines as well as their formation and various pollution mitigation techniques. The book addresses aspects of improvements in engine modification, such as design modifications for enhanced performance, both with conventional fuels as well as with new and alternative fuels. It also explores some new combustion concepts that will help to pave the way for complying with new emission concepts. Alternative fuels are addressed in this volume to help mitigate harmful emissions, and alternative power sources for automobiles are also discussed briefly to cover the switch over from fueled engines to electrics, including battery-powered electric vehicles and fuel cells. The authors explain the different technologies available to date to overcome the limitations of conventional prime movers (fueled by both fossil fuels and alternative fuels). Topics examined include: • Engine modifications needed to limit harmful emissions • The use of engine after-treatment devices to contain emissions • The development of new combustion concepts • Adoption of alternative fuels in existing engines • Switching over to electrics—advantages and limitations • Specifications of highly marketed automobiles • Emission measurement methods
Download or read book Emissions from Continuous Combustion Systems written by W. Cornelius and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the Symposium on Emissions from Continuous Combustion Systems that was held at the General Motors Research Laboratories, Warren, Michigan on September 27 and 28, 1971. This symposium was the fifteenth in an annual series presented by the Research Laboratories. Each symposium has covered a different technical discipline. To be selected as the theme of a symposium, the subject must be timely and of vital interest to General Motors as well as to the technical community at large. For each symposium, the practice is to solicit papers at the forefront of research from recognized authorities in the technical discipline of interest. Approximately sixty scientists and engineers from academic, government and industrial circles in this country and abroad are then invited to join about an equal number of General Motors technical personnel to discuss freely the commissioned papers. The technical portion of the meeting is supplemented by social functions at which ample time is afforded for informal exchanges of ideas amongst the participants. By such a direct interaction of a small and select group of informed participants, it is hoped to extend the boundaries of research in the selected technical field.
Download or read book Combustion and Emissions Control II written by Institute of Energy and published by Pergamon. This book was released on 1996-04-09 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion and Emissions Control II contains 37 papers presented at the Institute of Energy Second International Conference on Combustion and Emissions Control held in London, UK, 4-5 December 1995. Combustion and Emissions Control II features contributions on both fundamental and applied aspects of the science and technology of combustion and emissions control. Topics covered include emissions control and clean-up, energy from waste and biofuels, modelling for industry, plant performance, industrial burners and furnaces, advanced power generation, internal combustion engines. Presenting some of the latest developments in the field, Combustion and Emissions Control II is an invaluable reference tool on a subject of great environmental concern. Published by The Institute of Energy and distributed by Elsevier Science.
Download or read book Fossil Fuel Emissions Control Technologies written by Bruce G. Miller and published by Butterworth-Heinemann. This book was released on 2015-05-15 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: An expert guide to emission control technologies and applications, Fossil Fuels Emissions Control Technologies provides engineers with a guide to link emission control strategies to available technologies, allowing them to choose the technology that best suits their individual need. This includes reduction technologies for Nitrogen Oxides, Sulfur Oxides, Mercury and Acid Gases. In this reference, the author explains the most critical control technologies and their application to real-world regulatory compliance issues. Numerous diagrams and examples emphasizing pollution formation mechanisms, key points in pollutant control, and design techniques are also included. Provides numerous diagrams and examples to emphasize pollution formation mechanisms Coverage of critical control technologies and their application to real-world solutions Explains Sulfur Oxides, Acid Gases, Nitrogen Oxides Formation and Organic HAPs, Control and Reduction Technologies Covers Particulate Matter and Mercury Emissions Formation and Reduction Technologies
Download or read book Application of Clean Fuels in Combustion Engines written by Gabriele Di Blasio and published by Springer Nature. This book was released on 2022-01-04 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the impact of fuels characteristics and their effects on the combustion processes in internal combustion engines. It includes the analysis of a variety of biofuels (alcohol fuels and biodiesel) and biogases (natural gas, hydrogen, etc.), providing valuable information related to consequent effects on performance and emissions. The contents focus on recent results and current trends of fuel utilization in the transport sector. State-of-the-art of clean fuels application are also discussed. Thighs book will be of interest to those in academia and industry involved in fuels, IC engines, engine instrumentation, and environmental research.
Download or read book Propulsion Combustion written by Gabriel D. Roy and published by CRC Press. This book was released on 1998-02-01 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique volume that presents the fundamentals, the mechanisms involved, and the control and prediction of the processes, that will help in the design and development of modern future combustion systems applied to propulsion. The text examines research that has been conducted on a range of topics from the characterization of a new class of advanced energetic hydrocarbon fuels to the control of emissions. Also, relevant intermediate phenomena are covered.
Download or read book Combustion Technologies for a Clean Environment written by Maria G. da Graca Carvalho and published by CRC Press. This book was released on 2022-03-23 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected Papers from the Proceedings of the First International Conference Vilamoura, Portugal, September 3-6, 1991. The 54 papers in this volume establish the first in a series of biannual benchmarks for technologies that maximize energy conversion while minimizing undesirable emissions. Covering the entire range of industrial and transport combustion as well as strategies for energy R&D, these contributions will be useful to mechanical and chemical engineers in academia and industry, and technical personnel in military, energy and environmental agencies of government. Among topics covered in the book are: strategies: now and in the future; pulverised coal combustion; oil combustion; gas combustion; gas fired systems, biomass combustion; fluidized bed combustion; incinerators; internal combustion; engines and reaction kinetics.
Download or read book High Temperature Air Combustion written by Hiroshi Tsuji and published by CRC Press. This book was released on 2002-12-03 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maximize efficiency and minimize pollution: the breakthrough technology of high temperature air combustion (HiTAC) holds the potential to overcome the limitations of conventional combustion and allow engineers to finally meet this long-standing imperative. Research has shown that HiTAC technology can provide simultaneous reduction of CO2 and nitric
Download or read book Emissions from Continuous Combustion Systems written by General Motors Corporation. Research Laboratories and published by . This book was released on 1972 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt:
