Download or read book Combustion Engine Diagnosis written by Rolf Isermann and published by Springer. This book was released on 2017-05-04 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers first a short introduction to advanced supervision, fault detection and diagnosis methods. It then describes model-based methods of fault detection and diagnosis for the main components of gasoline and diesel engines, such as the intake system, fuel supply, fuel injection, combustion process, turbocharger, exhaust system and exhaust gas aftertreatment. Additionally, model-based fault diagnosis of electrical motors, electric, pneumatic and hydraulic actuators and fault-tolerant systems is treated. In general series production sensors are used. It includes abundant experimental results showing the detection and diagnosis quality of implemented faults. Written for automotive engineers in practice, it is also of interest to graduate students of mechanical and electrical engineering and computer science.
Download or read book Advanced Engine Diagnostics written by Avinash Kumar Agarwal and published by Springer. This book was released on 2018-11-07 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the discusses advanced fuels and combustion, emission control techniques, after-treatment systems, simulations and fault diagnostics, including discussions on different engine diagnostic techniques such as particle image velocimetry (PIV), phase Doppler interferometry (PDI), laser ignition. This volume bridges the gap between basic concepts and advanced research in internal combustion engine diagnostics, making it a useful reference for both students and researchers whose work focuses on achieving higher fuel efficiency and lowering emissions.
Download or read book Engine Combustion Instrumentation and Diagnostics written by Hua Zhao and published by SAE International. This book was released on 2001-01-30 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete description of instrumentation and in-cylinder measurement techniques for internal combustion engines. Written primarily for researchers and engineers involved in advanced research and development of internal combustion engines, the book provides an introduction to the instrumentation and experimental techniques, with particular emphasis on diagnostic techniques for in-cylinder measurements.
Download or read book Simulations and Optical Diagnostics for Internal Combustion Engines written by Akhilendra Pratap Singh and published by Springer Nature. This book was released on 2019-10-11 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on combustion simulations and optical diagnostics techniques, which are currently used in internal combustion engines. The book covers a variety of simulation techniques, including in-cylinder combustion, numerical investigations of fuel spray, and effects of different fuels and engine technologies. The book includes chapters focused on alternative fuels such as DEE, biomass, alcohols, etc. It provides valuable information about alternative fuel utilization in IC engines. Use of combustion simulations and optical techniques in advanced techniques such as microwave-assisted plasma ignition, laser ignition, etc. are few other important aspects of this book. The book will serve as a valuable resource for academic researchers and professional automotive engineers alike.
Download or read book Reciprocating Engine Combustion Diagnostics written by Rakesh Kumar Maurya and published by Springer. This book was released on 2019-03-19 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with in-cylinder pressure measurement and its post-processing for combustion quality analysis of conventional and advanced reciprocating engines. It offers insight into knocking and combustion stability analysis techniques and algorithms in SI, CI, and LTC engines, and places special emphasis on the digital signal processing of in-cylinder pressure signal for online and offline applications. The text gives a detailed description on sensors for combustion measurement, data acquisition, and methods for estimation of performance and combustion parameters. The information provided in this book enhances readers’ basic knowledge of engine combustion diagnostics and serves as a comprehensive, ready reference for a broad audience including graduate students, course instructors, researchers, and practicing engineers in the automotive, oil and other industries concerned with internal combustion engines.
Download or read book Combustion in Piston Engines written by A. K. Oppenheim and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion in Piston Engines presents the technique of pressure diagnostics to measure the fuel consumption in an engine cylinder and to monitor the operation of micro-electronic systems for its control. It provides a recipe for bridging the gap between the hydrocarbon-fed combustion technology of automotive powerplants of today and electro-magnetic technologies of the future. The author proposes and introduces a model for the design of a MECC (micro-electronically controlled combustion) systems to modulate combustion in engine cylinders. This system yields significant reduction in the formation of pollutants and the consumption of fuel, so that, eventually, emissions using any clean hydrocarbon fuel will be acceptable and gas mileage could be doubled.
Download or read book An Introduction to Engine Testing and Development written by Richard Atkins and published by SAE International. This book was released on 2009-04-01 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basic principles required for the testing and development of internal combustion engine powertrain systems, providing the new automotive engineer with the basic tools required to effectively carry out meaningful tests. With useful information for graduate students, new test technicians, and established engineers, this book explains the test process - from setting up a dynamometer test facility to testing for performance and durability. Combustion analysis and emissions, and new test trends are also covered.
Download or read book Diagnostics and modelling of combustion in internal combustion engines written by and published by . This book was released on 1994 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis of Combustion and Flow Diagnostics written by and published by SAE International. This book was released on 1998 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reciprocating Engine Combustion Diagnostics written by Rakesh Kumar Maurya and published by . This book was released on 2019 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with in-cylinder pressure measurement and its post-processing for combustion quality analysis of conventional and advanced reciprocating engines. It offers insight into knocking and combustion stability analysis techniques and algorithms in SI, CI, and LTC engines, and places special emphasis on the digital signal processing of in-cylinder pressure signal for online and offline applications. The text gives a detailed description on sensors for combustion measurement, data acquisition, and methods for estimation of performance and combustion parameters. The information provided in this book enhances readers' basic knowledge of engine combustion diagnostics and serves as a comprehensive, ready reference for a broad audience including graduate students, course instructors, researchers, and practicing engineers in the automotive, oil and other industries concerned with internal combustion engines. Maximizes readers' understanding of the construction, working principles, installation, signal processing and limitations of the transducers used for combustion analysis; Provides a range of different models for estimating heat release and heat transfer for combustion quality analysis; Describes statistical and chaotic methods used for combustion stability analysis and the different knock indices and combustion noise metrics evaluated from cylinder pressure signal; Reinforces concepts presented with end of chapter summary discussions and questions; Explains methods used for estimation of engine parameters such as TDC, compression ratio, air-fuel ratio, residual gas fraction and wall temperature using in-cylinder pressure measurement;.
Download or read book Internal Combustion Engine Fundamentals written by John B. Heywood and published by McGraw-Hill Education. This book was released on 1988 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text, by a leading authority in the field, presents a fundamental and factual development of the science and engineering underlying the design of combustion engines and turbines. An extensive illustration program supports the concepts and theories discussed.
Download or read book Diagnostics and Modeling in SI Engines written by Society of Automotive Engineers and published by SAE International. This book was released on 1996 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Internal Combustion Engine Cold Testing written by Rauf Tailony and published by . This book was released on 2019-11-10 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The internal combustion engine cold test is becoming one of the main tests performed during the late stage of the product development and production quality inspection. Analyzing the status of the engine is required before releasing it to the consumers market. The cold test is a station with a highly optimized design, where it is capable of inspecting the functionality of various components and properties of the engine in a relatively short period of time during the production process. The studies included in the coming sections are trying to achieve an accurate engine testing data which leads to a reliable decision regarding the engine health and efficiency. The cold testing stand is a vibratory source with a high complexity, for the fact of having many parameters and assemblies that play a role in forming the noise, vibration, and harshness (NVH) of the testing stand. A better understanding of the machine dynamics behavior can be achieved by creating a torsional vibratory model and calculating the driveline natural frequencies. Calculating the natural frequencies of the system is crucial for avoiding resonance excitations during the testing phase. Eigenvalue problem solution was constructed; the natural frequencies and the mode shapes were obtained. The calculated natural frequencies are showed a deviation of less than 5% of the measured values.Engine cold testing process depends mainly on the feedback of the mounted sensors on the driveline and the engine itself. Feedback signals carry information about the rotating speed, the engine noise and vibration, the manifold pressures and the torque values. The clarity of these signals affects the accuracy and the utility of the cold test during the engine development. The engine, the driveline, and the electric motor system operate at high speeds that generate axial and lateral vibrations. The failure of any part of the assembly distorts the signals and induces backlash or harmonic amplification. A backlash study is conducted by analyzing the harmonic distortions and a methodology to locate and eliminate the mechanical interruption source is explained. The elastic properties of the cold test driveline are essential in predicting the torsional dynamic behavior of the system. The occurrence of torsional vibrations compels designers to apply several approaches to shift the critical speeds away from the engine operating range. Existing conventional methods for reducing the torsions deformation caused by the compliance backlash were reviewed. A systematic approach is proposed for the backlash calculation through the torque signatures differentiation, and for designing an external collar damper to suppress the backlash periodic impact.The cold test stands accommodate different bearing supported areas, wherever needed to ensure the structural durability of the design. These bearings vary in type and functionality. Some bearings are located along the driveline, while others are embedded in the variable frequency drive (VFD) driving the rotating machinery of the cold test stand, up to the engine crankshaft bearings. The presence of several bearings along the power line makes it a challenge to determine the defect source when it occurs. If the cause of the malfunction is due to failure of one of the supporting bearings, then a downtime is needed for the engine maintenance and diagnostics. The following pages include methods for analyzing the data feedback of the cold test sensory and propose a new approach that can be conveniently applied to eliminate the bearing related harmonic distortions in the powertrain. Novel mathematical methods, graphical procedures, and innovative designs are included to enhance the cold testing performance and efficiency.
Download or read book Combustion and flow diagnostics written by SAE. and published by . This book was released on 2006 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Combustion Diagnostics written by Katharina Kohse-Hoinghaus and published by CRC Press. This book was released on 2002-04-26 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: The editors have assembled a world-class group of contributors who address the questions the combustion diagnostic community faces. They are chemists who identify the species to be measured and the interfering substances that may be present; physicists, who push the limits of laser spectroscopy and laser devices and who conceive suitable measuremen
Download or read book Engine Testing written by Michael Alexander Plint and published by Butterworth-Heinemann. This book was released on 1995 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current concern with environmental matters has given a fresh impetus to the development of the internal combustion engine. Test procedures are becoming ever more complex and demanding. This presents a challenge to the test and development engineer, since while mastering these new techniques they must still have at their finger tips all the traditional skills associated with engine testing.
Download or read book Progress in Combustion Diagnostics Science and Technology written by Paul Medwell and published by MDPI. This book was released on 2020-03-25 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The role that combustion plays in the world’s energy systems will continue to evolve with the changes in technological demands. For example, the challenges that we face today are more focused on the conservation of energy and addressing environmental concerns, which together necessitate cleaner and more efficient combustion processes using a range of fuel sources. This book includes contributions to highlight the recent progress in theory and experiments, development, and demonstration of technologies and systems involving combustion processes, for the production, storage, use, and conservation of energy.
