Download or read book Laser Diagnostics for Combustion Temperature and Species written by Alan C. Eckbreth and published by CRC Press. This book was released on 1996-10-10 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on spectroscopically-based, spatially-precise, laser techniques for temperature and chemical composition measurements in reacting and non-reacting flows, this book makes these powerful and important new tools in combustion research
Download or read book Laser Diagnostics and Optical Measurement Techniques in Internal Combustion Engines written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing concern about CO2 emissions and energy prices has led to new CO2 emission and fuel economy legislation being introduced in world regions served by the automotive industry. In response, automotive manufacturers and Tier-1 suppliers are developing a new generation of internal combustion (IC) engines with ultra-low emissions and high fuel efficiency. To further this development, a better understanding is needed of the combustion and pollutant formation processes in IC engines. As efficiency and emission abatement processes have reached points of diminishing returns, there is more o.
Download or read book Applied Combustion Diagnostics written by Katharina Kohse-Hoinghaus and published by CRC Press. This book was released on 2002-04-26 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: The editors have assembled a world-class group of contributors who address the questions the combustion diagnostic community faces. They are chemists who identify the species to be measured and the interfering substances that may be present; physicists, who push the limits of laser spectroscopy and laser devices and who conceive suitable measuremen
Download or read book Unsteady Combustion written by F. Culick and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected papers prepared for the NATO Advanced Study Institute on "Unsteady Combustion", which was held in Praia da Granja, Portugal, 6-17 September 1993. Approximately 100 delegates from 14 countries attended. The Institute was the most recent in a series beginning with "Instrumentation for Combustion and Flow in Engines", held in Vimeiro, Portugal 1987 and followed by "Combusting Flow Diagnostics" conducted in Montechoro, Portugal in 1990. Together, these three Institutes have covered a wide range of experimental and theoretical topics arising in the research and development of combustion systems with particular emphasis on gas-turbine combustors and internal combustion engines. The emphasis has evolved roughly from instrumentation and experimental techniques to the mixture of experiment, theory and computational work covered in the present volume. As the title of this book implies, the chief aim of this Institute was to provide a broad sampling of problems arising with time-dependent behaviour in combustors. In fact, of course, that intention encompasses practically all possibilities, for "steady" combustion hardly exists if one looks sufficiently closely at the processes in a combustion chamber. The point really is that, apart from the excellent paper by Bahr (Chapter 10) discussing the technology of combustors for aircraft gas turbines, little attention is directed to matters of steady performance. The volume is divided into three parts devoted to the subjects of combustion-induced oscillations; combustion in internal combustion engines; and experimental techniques and modelling.
Download or read book Spectroscopy and Optical Diagnostics for Gases written by Ronald K. Hanson and published by Springer. This book was released on 2015-10-26 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides an introduction to the science that governs the interaction of light and matter (in the gas phase). It provides readers with the basic knowledge to exploit the light-matter interaction to develop quantitative tools for gas analysis (i.e. optical diagnostics) and understand and interpret the results of spectroscopic measurements. The authors pair the basics of gas‐phase spectroscopy with coverage of key optical diagnostic techniques utilized by practicing engineers and scientists to measure fundamental flow‐field properties. The text is organized to cover three sub‐topics of gas‐phase spectroscopy: (1) spectral line positions, (2) spectral line strengths, and (3) spectral lineshapes by way of absorption, emission, and scattering interactions. The latter part of the book describes optical measurement techniques and equipment. Key subspecialties include laser induced fluorescence, tunable laser absorption spectroscopy, and wavelength modulation spectroscopy. It is ideal for students and practitioners across a range of applied sciences including mechanical, aerospace, chemical, and materials engineering.
Download or read book Applied Combustion Diagnostics written by KoHse-HoingHaus and published by Taylor & Francis US. This book was released on 2002-04-26 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: The editors have assembled a world-class group of contributors who address the questions the combustion diagnostic community faces. They are chemists who identify the species to be measured and the interfering substances that may be present; physicists, who push the limits of laser spectroscopy and laser devices and who conceive suitable measurement schemes; and engineers, who know combustion systems and processes. This book assists in providing guidance for the planning of combustion experiments, in judging research strategies and in conceiving new ideas for combustion research. It provides a snapshot of the available diagnostic methods and thier typical applications from the perspective of leading experts in the field.
Download or read book Laser Induced Breakdown Spectroscopy written by Jagdish P. Singh and published by Elsevier. This book was released on 2020-06-02 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser-Induced Breakdown Spectroscopy, Second Edition, covers the basic principles and latest developments in instrumentation and applications of Laser Induced Breakdown Spectroscopy (LIBS). Written by active experts in the field, it serves as a useful resource for analytical chemists and spectroscopists, as well as graduate students and researchers engaged in the fields of combustion, environmental science, and planetary and space exploration. This fully revised second edition includes several new chapters on new LIBS techniques as well as several new applications, including flame and off-gas measurement, pharmaceutical samples, defense applications, carbon sequestration and site monitoring, handheld instruments, and more. LIBS has rapidly developed into a major analytical technology with the capability of detecting all chemical elements in a sample, of real- time response, and of close-contact or stand-off analysis of targets. It does not require any sample preparation, unlike conventional spectroscopic analytical techniques. Samples in the form of solids, liquids, gels, gases, plasmas, and biological materials (like teeth, leaves, or blood) can be studied with almost equal ease. This comprehensive reference introduces the topic to readers in a simple, direct, and accessible manner for easy comprehension and maximum utility. - Covers even more applications of LIBS beyond the first edition, including combustion, soil physics, environment, and life sciences - Includes new chapters on LIBS techniques that have emerged in the last several years, including Femtosecond LIBS and Molecular LIBS - Provides inspiration for future developments in this rapidly growing field in the concluding chapter
Download or read book Novel Internal Combustion Engine Technologies for Performance Improvement and Emission Reduction written by Akhilendra Pratap Singh and published by Springer Nature. This book was released on 2021-06-14 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph covers different aspects of internal combustion engines including engine performance and emissions and presents various solutions to resolve these issues. The contents provide examples of utilization of methanol as a fuel for CI engines in different modes of transportation, such as railroad, personal vehicles or heavy duty road transportation. The volume provides information about the current methanol utilization and its potential, its effect on the engine in terms of efficiency, combustion, performance, pollutants formation and prediction. The contents are also based on review of technologies present, the status of different combustion and emission control technologies and their suitability for different types of IC engines. Few novel technologies for spark ignition (SI) engines have been also included in this book, which makes this book a complete solution for both kind of engines. This book will be useful for engine researchers, energy experts and students involved in fuels, IC engines, engine instrumentation and environmental research.
Download or read book Experimental Combustion written by D. P. Mishra and published by CRC Press. This book was released on 2014-05-12 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fulfilling the need for a classical approach, Experimental Combustion: An Introduction begins with an overview of the key aspects of combustion-including chemical kinetics, premixed flame, diffusion flame, and liquid droplet combustion-followed by a discussion of the general elements of measurement systems and data acquisition and analysis. In addi
Download or read book State of the art Laser Gas Sensing Technologies written by Yufei Ma and published by MDPI. This book was released on 2020-03-05 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trace gas sensing technologies are widely used in many applications, such as environmental monitoring, life science, medical diagnostics, and planetary exploration. On the one hand, laser sources have developed greatly due to the rapid development of laser media and laser techniques in recent years. Some novel lasers such as solid-state, diode, and quantum cascade lasers have experienced significant progress. At present, laser wavelengths can cover the range from ultraviolet to terahertz, which could promote the development of laser gas sensing technologies significantly. On the other hand, some new gas sensing methods have appeared, such as photothermal spectroscopy and photoacoustic spectroscopy. Laser spectroscopy-based gas sensing techniques have the advantages of high sensitivity, non-invasiveness, and allowing in situ, real-time observation. Due to the rapid and recent developments in laser source as well as the great merits of laser spectroscopy-based gas sensing techniques, this book aims to provide an updated overview of the state-of-the-art laser gas sensing technologies.
Download or read book Gas Lasers written by Masamori Endo and published by CRC Press. This book was released on 2018-10-03 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lasers with a gaseous active medium offer high flexibility, wide tunability, and advantages in cost, beam quality, and power scalability. Gas lasers have tended to become overshadowed by the recent popularity and proliferation of semiconductor lasers. As a result of this shift in focus, details on modern developments in gas lasers are difficult to find. In addition, different types of gas lasers have unique properties that are not well-described in other references. Collecting expert contributions from authorities dealing with specific types of lasers, Gas Lasers examines the fundamentals, current research, and applications of this important class of laser. It is important to understand all types of lasers, from solid-state to gaseous, before making a decision for any application. This book fills in the gaps by discussing the definition and properties of gaseous media along with its fluid dynamics, electric excitation circuits, and optical resonators. From this foundation, the discussion launches into the basic physics, characteristics, applications, and current research efforts for specific types of gas lasers: CO lasers, CO2 lasers, HF/DF lasers, excimer lasers, iodine lasers, and metal vapor lasers. The final chapter discusses miscellaneous lasers not covered in the previous chapters. Collecting hard-to-find material into a single, convenient source, Gas Lasers offers an encyclopedic survey that helps you approach new applications with a more complete inventory of laser options.
Download or read book Microgravity Combustion Diagnostics Workshop written by Gilbert J. Santoro and published by . This book was released on 1988 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion Measurements written by Norman Chigier and published by CRC Press. This book was released on 2024-11-01 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book begins with an introduction to the general problems of making measurements in high temperature and a presentation of chemically reacting flow systems. It describes each instrument with the various diagnostic techniques and discusses measurements that have been made in furnaces, flames, and rocket engines. The detailed measurement techniques described in this book cover a wide spectrum of applications in combustion systems, including gas turbine, rocket measurement techniques that were developed in laboratories. Information obtained on detailed temperature, velocity, particle size, and gas concentration distribution is leading to improve understanding of the chemical combustion process and to design imporvements in combustors.
Download or read book Laser Techniques in Luminescence Spectroscopy written by Tuan Vo-Dinh and published by ASTM International. This book was released on 1990 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Measurements written by Franz Mayinger and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing possibilities of computer-aided data processing have caused a new revival of optical techniques in many areas of mechanical and chemical en gineering. Optical methods have a long tradition in heat and mass transfer and in fluid dynamics. Global experimental information is not sufficient for developing constitution equations to describe complicated phenomena in fluid dynamics or in transfer processes by a computer program . Furthermore, a detailed insight with high local and temporal resolution into the thermo-and fluiddynamic situations is necessary. Sets of equations for computer program in thermo dynamics and fluid dynamics usually consist of two types of formulations: a first one derived from the conservation laws for mass, energy and momentum, and a second one mathematically modelling transport processes like laminar or turbulent diffusion. For reliably predicting the heat transfer, for example, the velocity and temperature field in the boundary layer must be known, or a physically realistic and widely valid correlation describing the turbulence must be avail able. For a better understanding of combustion processes it is necessary to know the local concentration and temperature just ahead of the flame and in the ignition zone.
Download or read book IC Engines written by B. P. Pundir and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the reader to fundamentals of engine combustion processes and pollutant formation combustion thermodynamics, conceptual and thermodynamic engine combustion models, fluid motion in the cylinder, the conventional and advanced combustion systems such as for DISC, CAI, and HCCI engines are discussed. For a wider coverage on the subject, emission measurement alternative propulsion systems are included in this text. Laser based and other combustion diagnostic techniques are outlined to introduce readers to modern combustion research methods. The book attempts to present theoretical aspects and the practices including the latest developments in engine and emission control technology.
Download or read book Advanced Diagnostics in Combustion Science written by Zhen-Yu Tian and published by Springer Nature. This book was released on 2023-07-12 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook, supported by the Textbook Publishing Center of University of Chinese Academy of Sciences, provides a fundamental introduction to advanced diagnostics techniques for graduate students majoring in combustion science, chemistry, and chemical engineering-related subjects. The textbook provides an overview with respect to the spectroscopic methods in advanced diagnostics techniques such as gas chromatography/mass spectrometry, thermochemical analysis, Raman scattering, and nuclear magnetic resonance. It then describes the comprehensive basic theory, equipment structure, and testing methods of diagnostic techniques and summarizes the analysis methods commonly used in combustion chemical reaction processes. This can provide graduate students with important guidance and comprehensive understanding of diagnostics techniques before performing physics and chemistry experiments. In addition, it provides an introduction into using common mathematical and graphics packages for students to acquire and practice the tools to comply with international standards. The textbook is concise and illustrative and includes hot issues and current progress of diagnostics. In addition, exercises and questions are included at the end of each chapter for students to practice and gain hands-on experience. Given its scope, the textbook is of great benefit to graduate students in combustion chemistry and engineering and other related areas such as environmental science, optical engineering, and thermal science and is also beneficial for researchers with interdisciplinary backgrounds.
