Download or read book Combining Stabilized Finite Element Methods written by Frederic G. C. Valentin and published by . This book was released on 1995 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mathematical and Computational Methods for Compressible Flow written by Miloslav Feistauer and published by Oxford University Press, USA. This book was released on 2003 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with mathematical and numerical methods for compressible flow. It aims to provide the reader with a sufficiently detailed and extensive, mathematically precise, but comprehensible guide, through a wide spectrum of mathematical and computational methods used in Computational Fluid Dynamics (CFD) for the numerical simulation of compressible flow. Up-to-date techniques applied in the numerical solution of inviscid as well as viscous compressible flow on unstructured meshes are explained, thus allowing the simulation of complex three-dimensional technically relevant problems. Among some of the methods addressed are finite volume methods using approximate Riemann solvers, finite element techniques, such as the streamline diffusion and the discontinuous Galerkin methods, and combined finite volume - finite element schemes. The book gives a complex insight into the numerics of compressible flow, covering the development of numerical schemes and their theoretical mathematical analysis, their verification on test problems and use in solving practical engineering problems. The book will be helpful to specialists coming into contact with CFD - pure and applied mathematicians, aerodynamists, engineers, physicists and natural scientists. It will also be suitable for advanced undergraduate, graduate and postgraduate students of mathematics and technical sciences.
Download or read book Finite Element Methods for Fluids written by Olivier Pironneau and published by . This book was released on 1989 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces the formulation of problems in fuild mechanics and dynamics, and shows how they can be analyzed and resolved using finite element methods. This practical book also discusses the equations of fluid mechanics and investigates the problems to which these equations can be applied, as well as how they can be analyzed and solved. Contains illustrations of computer simulations using the methods described in the book and features numerous illustrations.
Download or read book Advanced Finite Element Methods with Applications written by Thomas Apel and published by Springer. This book was released on 2019-06-28 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite element methods are the most popular methods for solving partial differential equations numerically, and despite having a history of more than 50 years, there is still active research on their analysis, application and extension. This book features overview papers and original research articles from participants of the 30th Chemnitz Finite Element Symposium, which itself has a 40-year history. Covering topics including numerical methods for equations with fractional partial derivatives; isogeometric analysis and other novel discretization methods, like space-time finite elements and boundary elements; analysis of a posteriori error estimates and adaptive methods; enhancement of efficient solvers of the resulting systems of equations, discretization methods for partial differential equations on surfaces; and methods adapted to applications in solid and fluid mechanics, it offers readers insights into the latest results.
Download or read book Discontinuous Galerkin Method in Time Combined with an Stabilized Finite Element Method in Space for Linear First order PDEs written by Friedhelm Schieweck and published by . This book was released on 2014 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Element Methods for Flow Problems written by Jean Donea and published by John Wiley & Sons. This book was released on 2003-06-02 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die Finite-Elemente-Methode, eines der wichtigsten in der Technik verwendeten numerischen Näherungsverfahren, wird hier gründlich und gut verständlich, aber ohne ein Zuviel an mathematischem Formalismus abgehandelt. Insbesondere geht es um die Anwendung der Methode auf Strömungsprobleme. Alle wesentlichen aktuellen Forschungsergebnisse wurden in den Band aufgenommen; viele davon sind bisher nur verstreut in der Originalliteratur zu finden.
Download or read book Navier Stokes Equations written by Roger Temam and published by American Mathematical Soc.. This book was released on 2001-04-10 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1977, the book is devoted to the theory and numerical analysis of the Navier-Stokes equations for viscous incompressible fluid. On the theoretical side, results related to the existence, the uniqueness, and, in some cases, the regularity of solutions are presented. On the numerical side, various approaches to the approximation of Navier-Stokes problems by discretization are considered, such as the finite dereference method, the finite element method, and the fractional steps method. The problems of stability and convergence for numerical methods are treated as completely as possible. The new material in the present book (as compared to the preceding 1984 edition) is an appendix reproducing a survey article written in 1998. This appendix touches upon a few aspects not addressed in the earlier editions, in particular a short derivation of the Navier-Stokes equations from the basic conservation principles in continuum mechanics, further historical perspectives, and indications on new developments in the area. The appendix also surveys some aspects of the related Euler equations and the compressible Navier-Stokes equations. The book is written in the style of a textbook and the author has attempted to make the treatment self-contained. It can be used as a textbook or a reference book for researchers. Prerequisites for reading the book include some familiarity with the Navier-Stokes equations and some knowledge of functional analysis and Sololev spaces.
Download or read book Computational Mechanics written by Zhenhan Yao and published by 清华大学出版社有限公司. This book was released on 2004 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Mathematics and Advanced Applications written by Alfredo Bermúdez de Castro and published by Springer Science & Business Media. This book was released on 2007-10-08 with total page 1202 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings collect lectures given at ENUMATH 2005, the 6th European Conference on Numerical Mathematics and Advanced Applications held in Santiago de Compostela, Spain in July, 2005. Topics include applications such as fluid dynamics, electromagnetism, structural mechanics, interface problems, waves, finance, heat transfer, unbounded domains, numerical linear algebra, convection-diffusion, as well as methodologies such as a posteriori error estimates, discontinuous Galerkin methods, multiscale methods, optimization, and more.
Download or read book Stabilized Finite Element Methods for Incompressible Flows with Emphasis on Moving Boundaries and Interfaces written by Marek Antoni Behr and published by . This book was released on 1992 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stabilized Finite Element Methods written by L. P. Franca and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computation and Applied Mathematics written by and published by . This book was released on 1995 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Element Modeling of Multiscale Transport Phenomena written by Vahid Nassehi and published by World Scientific. This book was released on 2011 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex multiscale systems such as combined free or porous flow regimes and transport processes governed by combined diffusion, convection and reaction mechanisms, which cannot be readily modeled using traditional methods, can be solved by multiscale or stabilized finite element schemes. Due to the importance of the described multiscale processes in applications such as separation processes, reaction engineering and environmental systems analysis, a sound knowledge of such methods is essential for many researchers and design engineers who wish to develop reliable solutions for industrially relevant problems. The main scope of this book is to provide an authoritative description of recent developments in the field of finite element analysis, with a particular emphasis on the multiscale finite element modeling of transport phenomena and flow problem.
Download or read book Geometrically Unfitted Finite Element Methods and Applications written by Stéphane P. A. Bordas and published by Springer. This book was released on 2018-03-13 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a snapshot of the state of the art of the rapidly evolving field of integration of geometric data in finite element computations. The contributions to this volume, based on research presented at the UCL workshop on the topic in January 2016, include three review papers on core topics such as fictitious domain methods for elasticity, trace finite element methods for partial differential equations defined on surfaces, and Nitsche’s method for contact problems. Five chapters present original research articles on related theoretical topics, including Lagrange multiplier methods, interface problems, bulk-surface coupling, and approximation of partial differential equations on moving domains. Finally, two chapters discuss advanced applications such as crack propagation or flow in fractured poroelastic media. This is the first volume that provides a comprehensive overview of the field of unfitted finite element methods, including recent techniques such as cutFEM, traceFEM, ghost penalty, and augmented Lagrangian techniques. It is aimed at researchers in applied mathematics, scientific computing or computational engineering.
Download or read book Finite Elements III written by Alexandre Ern and published by Springer Nature. This book was released on 2021-03-29 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the third volume of a three-part textbook suitable for graduate coursework, professional engineering and academic research. It is also appropriate for graduate flipped classes. Each volume is divided into short chapters. Each chapter can be covered in one teaching unit and includes exercises as well as solutions available from a dedicated website. The salient ideas can be addressed during lecture, with the rest of the content assigned as reading material. To engage the reader, the text combines examples, basic ideas, rigorous proofs, and pointers to the literature to enhance scientific literacy. Volume III is divided into 28 chapters. The first eight chapters focus on the symmetric positive systems of first-order PDEs called Friedrichs' systems. This part of the book presents a comprehensive and unified treatment of various stabilization techniques from the existing literature. It discusses applications to advection and advection-diffusion equations and various PDEs written in mixed form such as Darcy and Stokes flows and Maxwell's equations. The remainder of Volume III addresses time-dependent problems: parabolic equations (such as the heat equation), evolution equations without coercivity (Stokes flows, Friedrichs' systems), and nonlinear hyperbolic equations (scalar conservation equations, hyperbolic systems). It offers a fresh perspective on the analysis of well-known time-stepping methods. The last five chapters discuss the approximation of hyperbolic equations with finite elements. Here again a new perspective is proposed. These chapters should convince the reader that finite elements offer a good alternative to finite volumes to solve nonlinear conservation equations.
Download or read book Recent Advances in Parallel Virtual Machine and Message Passing Interface written by Jack Dongarra and published by Springer. This book was released on 2003-07-31 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel Virtual Machine (PVM) and Message Passing Interface (MPI) are the most frequently used tools for programming according to the message passing paradigm, which is considered one of the best ways to develop parallel applications. This volume comprises 67 revised contributions presented at the Sixth European PVM/MPI Users' Group Meeting, which was held in Barcelona, Spain, 26-29 September 1999. The conference was organized by the Computer Science Department of the Universitat Autònoma de Barcelona. This conference has been previously held in Liverpool, UK (1998) and Cracow, Poland (1997). The first three conferences were devoted to PVM and were held at the TU Munich, Germany (1996), ENS Lyon, France (1995), and University of Rome (1994). This conference has become a forum for users and developers of PVM, MPI, and other message passing environments. Interaction between those groups has proved to be very useful for developing new ideas in parallel computing and for applying some of those already existent to new practical fields.
Download or read book Finite Element Methods for Incompressible Flow Problems written by Volker John and published by Springer. This book was released on 2016-10-27 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores finite element methods for incompressible flow problems: Stokes equations, stationary Navier-Stokes equations and time-dependent Navier-Stokes equations. It focuses on numerical analysis, but also discusses the practical use of these methods and includes numerical illustrations. It also provides a comprehensive overview of analytical results for turbulence models. The proofs are presented step by step, allowing readers to more easily understand the analytical techniques.
