Download or read book Combined Heat and Power written by Paul Breeze and published by Academic Press. This book was released on 2017-11-30 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combined Heat and Power Generation is a concise, up-to-date and accessible guide to the combined delivery of heat and power to anything, from a single home to a municipal power plant. Breeze discusses the historical background for CHP and why it is set to be a key emission control strategy for the 21st Century. Various technologies such as piston engines, gas turbines and fuel cells are discussed. Economic and environmental factors also are considered and analyzed, making this a very valuable resource for those involved with the research, design, implementation and management of the provision of heat and power. Discusses the historical background of combined heat and power usage and why CHP is seen as a key emission control strategy for the 21st Century Explores the technological aspects of CHP in a clear and concise style and delves into various key technologies, such as piston engines, steam and gas turbines and fuel cells Evaluates the economic factors of CHP and the installation of generation systems, along with energy conversion efficiencies

Download or read book Small and Micro Combined Heat and Power CHP Systems written by R Beith and published by Elsevier. This book was released on 2011-04-30 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small and micro combined heat and power (CHP) systems are a form of cogeneration technology suitable for domestic and community buildings, commercial establishments and industrial facilities, as well as local heat networks. One of the benefits of using cogeneration plant is a vastly improved energy efficiency: in some cases achieving up to 80–90% systems efficiency, whereas small-scale electricity production is typically at well below 40% efficiency, using the same amount of fuel. This higher efficiency affords users greater energy security and increased long-term sustainability of energy resources, while lower overall emissions levels also contribute to an improved environmental performance. Small and micro combined heat and power (CHP) systems provides a systematic and comprehensive review of the technological and practical developments of small and micro CHP systems. Part one opens with reviews of small and micro CHP systems and their techno-economic and performance assessment, as well as their integration into distributed energy systems and their increasing utilisation of biomass fuels. Part two focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines, gas turbines and microturbines, Stirling engines, organic Rankine cycle process and fuel cell systems. Heat-activated cooling (i.e. trigeneration) technologies and energy storage systems, of importance to the regional/seasonal viability of this technology round out this section. Finally, part three covers the range of applications of small and micro CHP systems, from residential buildings and district heating, to commercial buildings and industrial applications, as well as reviewing the market deployment of this important technology. With its distinguished editor and international team of expert contributors, Small and micro combined heat and power (CHP) systems is an essential reference work for anyone involved or interested in the design, development, installation and optimisation of small and micro CHP systems. Reviews small- and micro-CHP systems and their techno-economic and performance assessment Explores integration into distributed energy systems and their increasing utilisation of biomass fuels Focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines

Download or read book Hydrogen Fuel Cell Technology for Stationary Applications written by Badea, Gheorghe and published by IGI Global. This book was released on 2021-04-30 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unconventional energy sources have gained and will continue to gain an increasing share of energy systems around the world. Today, hydrogen is recognized as a non-polluting energy carrier because it does not contribute to global warming if it is produced from renewable sources. Hydrogen is already part of today's chemical industry, but as an energy source, its rare advantages can only be obtained with the help of technologies. Currently, the fuel cell is considered the cleanest sustainable energy. With the development of fuel cells, hydrogen-based energy generation becomes a reality. Hydrogen Fuel Cell Technology for Stationary Applications is an essential publication that focuses on the advantages of hydrogen as a primary energy center and addresses its use in the sustainable future of stationary applications. While highlighting a broad range of topics including cost expectations, production methods, and social impact, this publication explores all aspects of the implementation and dissemination of fuel cell technology in the hope of establishing a sustainable marketplace for it. This book is ideally designed for fuel cell manufacturers, architects, electrical engineers, civil engineers, environmental engineers, advocates, manufacturers, mechanics, researchers, academicians, and students.

Download or read book Combined Production of Heat and Power written by J. Sirchis and published by Routledge. This book was released on 2003-09-02 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a European seminar organized by the CEC, Directorate-General for Energy and the Instituto para la Diversificacion y Ahorro de la Energia Eua (IDEA) with the cooperation of Gomez Pardo Foundation's Energy Commission, Madrid, Spain, 10-11 October 1989.

Download or read book Cogeneration combined Heat and Power CHP written by J. H. Horlock and published by Krieger Publishing Company. This book was released on 1997-01-01 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides an introduction to all aspects of combined heat and power (CHP) thermodynamics, design, economics and utilization. Emphasis is placed on the performance of CHP plants compared to conventional plants, and the economic considerations in combined heat and power utilization. There are many CHP installations in commission and, where applicable, the text describes practical examples of CHP use.

Download or read book Renewable Energy Systems written by Martin Kaltschmitt and published by Springer. This book was released on 2012-12-06 with total page 1898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humanity is facing a steadily diminishing supply of fossil fuels, causing researchers, policy makers, and the population as a whole to turn increasingly to alternative and especially renewable sources of energy to make up this deficit. Gathering over 80 peer-reviewed entries from the Encyclopedia of Sustainability Science and Technologies, Renewable Energy Systems provides an authoritative introduction to a wide variety of renewable energy sources. State-of-the-art coverage includes geothermal power stations, ocean energy, renewable energy from biomass, waste to energy, and wind power. This comprehensive, two-volume work provides an excellent introduction for those entering these fields, as well as new insights for advanced researchers, industry experts, and decision makers.

Download or read book Combined Heating Cooling Power Handbook written by Neil Petchers and published by The Fairmont Press, Inc.. This book was released on 2003 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the economic road blocks which have previously served to discourage the implementation of alternative power generation technologies can now be readily overcome through effective energy resource optimization. It is now a fact that solid financial returns can be achieved from combined heating, cooling and power generation projects by integrating energy and cost efficiency goals, and seeking a match between power production and heating/cooling requirements. This book is intended to serve as a road map to those seeking to realize optimum economic returns on such projects. The first section provides an introduction to basic heat and power thermodynamics, with an overview of heat and power generation technologies and equipment. The second section explores the infrastructure in which the project must be implemented, including environmental considerations, as well as utility rate structures. The third section provides detailed coverage of a broad range of technology types, and discusses how opportunities for their application can be identified and successfully exploited. The final section takes you through each step of project development, implementation and operation. Numerous examples are provided of actual field applications, with supporting documentation of system layouts and performance. The text is supplemented with more than one thousand graphics, including photos, cutaway drawings, layout schematics, performance curves, and data tables.

Download or read book Cogeneration written by Christos A. Frangopoulos and published by IET. This book was released on 2017-03-10 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive, integrated treatment of cogeneration technologies and systems. Also called combined heat and power (CHP), cogeneration is the use of a power station to deliver two or more useful forms of energy (e.g. generating electricity and heat at the same time). All conventional, fuel-based plants generate heat as by-product, which is often wasted. Cogeneration captures part of this heat for delivery to consumers. The book gives a tour of the available cogeneration technologies and their features. It provides plenty of instructive examples of cogeneration projects to illustrate key concepts, and also covers the relevant regulatory and legal frameworks. It is an ideal text/reference for anyone working in power systems and energy engineering. Topics covered include: * Benefits of cogeneration * Cogeneration technologies * Electrical engineering aspects * Applications of cogeneration * Fuels for cogeneration systems * Thermodynamic analysis * Environmental impacts of cogeneration * Reliability and availability * Economic analysis of cogeneration systems * Regulatory and legal frameworks * Selection, integration and operation of cogeneration systems * Simulation and optimisation * Synthesis, design and operation * Examples of cogeneration projects * Research and development of cogeneration * Summary and conclusions

Download or read book Power Generation Technologies written by Paul Breeze and published by Elsevier. This book was released on 2005-02-04 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book makes intelligible the wide range of electricity generating technologies available today, as well as some closely allied technologies such as energy storage. The book opens by setting the many power generation technologies in the context of global energy consumption, the development of the electricity generation industry and the economics involved in this sector. A series of chapters are each devoted to assessing the environmental and economic impact of a single technology, including conventional technologies, nuclear and renewable (such as solar, wind and hydropower). The technologies are presented in an easily digestible form. Different power generation technologies have different greenhouse gas emissions and the link between greenhouse gases and global warming is a highly topical environmental and political issue. With developed nations worldwide looking to reduce their emissions of carbon dioxide, it is becoming increasingly important to explore the effectiveness of a mix of energy generation technologies. Power Generation Technologies gives a clear, unbiased review and comparison of the different types of power generation technologies available. In the light of the Kyoto protocol and OSPAR updates, Power Generation Technologies will provide an invaluable reference text for power generation planners, facility managers, consultants, policy makers and economists, as well as students and lecturers of related Engineering courses. · Provides a unique comparison of a wide range of power generation technologies - conventional, nuclear and renewable · Describes the workings and environmental impact of each technology · Evaluates the economic viability of each different power generation system

Download or read book Power Generation from Solid Fuels written by Hartmut Spliethoff and published by Springer Science & Business Media. This book was released on 2010-03-18 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Generation from Solid Fuels introduces the different technologies to produce heat and power from solid fossil (hard coal, brown coal) and renewable (biomass, waste) fuels, such as combustion and gasification, steam power plants and combined cycles etc. The book discusses technologies with regard to their efficiency, emissions, operational behavior, residues and costs. Besides proven state of the art processes, the focus is on the potential of new technologies currently under development or demonstration. The main motivation of the book is to explain the technical possibilities for reducing CO2 emissions from solid fuels. The strategies which are treated are: more efficient power and heat generation technologies, processes for the utilisation of renewable solid fuels, such as biomass and waste, and technologies for carbon capture and storage. Power Generation from Solid Fuels provides, both to academia and industry, a concise treatment of industrial combustion of all types of solid, hopefully inspiring the next generation of engineers and scientists.

Download or read book Conversion of Coal Fired Power Plants to Cogeneration and Combined Cycle written by Ryszard Bartnik and published by Springer Science & Business Media. This book was released on 2011-07-28 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conversion of Coal-Fired Power Plant to Cogeneration and Combined-Cycle presents the methodology, calculation procedures and tools used to support enterprise planning for adapting power stations to cogeneration and combined-cycle forms. The authors analyze the optimum selection of the structure of heat exchangers in a 370 MW power block, the structure of heat recovery steam generators and gas turbines. Conversion of Coal-Fired Power Plant to Cogeneration and Combined-Cycle also addresses the problems of converting existing power plants to dual-fuel gas-steam combined-cycle technologies coupled with parallel systems. Conversion of Coal-Fired Power Plant to Cogeneration and Combined-Cycle is an informative monograph written for researchers, postgraduate students and policy makers in power engineering.

Download or read book Electricity Production from Renewables written by Rui Castro and published by Springer Nature. This book was released on 2022-01-01 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is about economically competitive renewable energy sources (RES), including onshore and offshore wind, solar and small-hydro plants, and focusing on the electricity production from these sources. Clearly divided into sections discussing the different RES, the textbook begins with an introduction of AC electrical circuits, aimed at non-electrical engineers. It then offers an economic assessment of renewable energy projects, before discussing photovoltaic technologies and concentrated solar power. It explores the theory of wind to power conversion, electrical generator types and electrical part of offshore systems. Presenting theoretical concepts related to the electrical framework associated with RES, alongside examples and solved problems, this book will clearly introduce the topic of renewable power sources to graduate students, researchers and practitioners alike. After reading the book, readers will be equipped to make a preliminary techno-economic assessment of a RES.

Download or read book Greener Energy Systems written by Eric Jeffs and published by CRC Press. This book was released on 2018-09-03 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have seen acceleration in the development of cleaner energy systems. In Europe and North America, many old coal-fired power plants will be shut down in the next few years and will likely be replaced by combined cycle plants with higher-efficiency gas turbines that can start up and load quickly. With the revival of nuclear energy, designers are creating smaller nuclear reactors of a simpler integrated design that could expand the application of clean, emission-free energy to industry. And a number of manufacturers now offer hybrid cars with an electric motor and a gasoline engine to charge the batteries on the move. This would seem to be the way forward in reducing transport emissions, until countries develop stronger electricity supply systems to cope with millions of electric cars being charged daily. Greener Energy Systems: Energy Production Technologies with Minimum Environmental Impact tackles the question of how to generate enough electricity, efficiently and with minimum environmental impact, to meet future energy needs across the world. Supplemented with extensive figures and color photographs, this book: Traces the development of electricity supply Explains energy production risks and how major accidents have influenced development Discusses the combined cycle, the preferred system for power capacity expansion in much of the world Looks at combined heat and power Addresses whether coal can continue to be a fuel for power generation Examines nuclear power generation Asks why shipping has not followed some of the world's navies into nuclear propulsion Considers how to electrify more transport systems Reviews the current state of renewable systems, particularly hydro and solar The book defines the key elements of greener energy systems, noting that they must be highly efficient, with rapid start up and loading; produce minimum emissions; and use simpler technology. The author has more than forty years of experience as an international journalist reporting on power-generation technologies and energy policies around the world. He concludes that there is no place for coal and that combined cycle, hydro, solar, and biomass must complement nuclear energy, which must serve more applications than just generating electricity.

Download or read book Combined Production of Electric Power and Heat written by Sam Stuart and published by Elsevier. This book was released on 2014-05-20 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combined Production of Electric Power and Heat contains the proceedings of a seminar organized by the Committee on Electric Power of the United Nations Economic Commission for Europe, held in Hamburg, Federal Republic of Germany in November 1978. The book highlights the sharing of information on the economic and social aspects of efficient energy and heat production technologies. Contributors from different countries present papers discussing various topics on electric power and heat production such as energy policies to save energy; combined production of heat and electricity and district heating for energy conservation and oil substitution; technical and economic aspects of the combined production of electric power and heat; and the institutional, financial, and methodical problems of energy production. Policy makers, engineers, politicians, scientists, and political leaders will find the book invaluable.

Download or read book Cogeneration and Polygeneration Systems written by Majid Amidpour and published by Academic Press. This book was released on 2020-11-23 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cogeneration and Polygeneration Systems explores the suite of state-of-the-art modeling, design, analysis and optimization procedures for creating and retooling optimally efficient combined heat and power (CHP) and polygeneration energy systems. The book adopts exergetic and thermoeconomic analysis and related modeling and simulation tools to inform performance and systems design in modern cogeneration plants. Chapters provide a methodical approach to the design, operation and troubleshooting of cogeneration systems when they are integrated with industrial processes. Cogeneration targets, environmental impacts, total site integration, and availability and reliability issues are addressed in-depth. Explores exergetic and exergoeconomic analysis for optimization purposes of CHP systems Addresses availability and reliability issues within cogeneration systems Reviews modern polygeneration systems based on renewable energy resources and fuel cells

Download or read book Thermal Power Plants written by Paweł Madejski and published by BoD – Books on Demand. This book was released on 2018-05-02 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for electricity and heat production is still largely covered by conventional thermal power plants based on fossil fuel combustion. Thermal power stations face a big challenge to meet the environmental requirements constantly keeping high process efficiency and avoiding lifetime shortening of critical components. In recent years, many activities have been observed to reduce pollutant emissions and optimize performance in thermal power plants. Increased share of renewable sources of energy in domestic markets enforces flexible operation and fast adjustment to actual demand. Gas power plants start to play a very important role in this process, allowing for rapid change of load and emission reduction. Operation under changing load together with keeping emissions at the accurate level requires constantly introducing new solutions and technologies as well as carrying out many research and development activities for optimization of the electricity and heat production process. The edited book is aimed to present new technologies, innovative solutions, measurement techniques, tools and computational methods dedicated to thermal power plants in the light of new trends and challenges.

Download or read book Combined Heat and Power Design Guide written by and published by . This book was released on 2015-05-26 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Current, authoritative guide on implementing combined heat and power (CHP) systems that provide electricity and useful thermal energy in a single, integrated system. Covers available technologies, site assessment, system design, installation, operation, and maintenance, with detailed case studies and a glossary. In dual units, Inch-Pound (I-P) and International System (SI)"--