Download or read book Column Flotation written by Julius B. Rubinstein and published by CRC Press. This book was released on 1995-07-15 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Column Flotation written by Jim A. Finch and published by Elsevier Science & Technology. This book was released on 1990 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. Column flotation is one of the most important new developments to emerge in mineral processing technology in the last 50 years. Currently there is much research and development interest worldwide, and Professors Finch and Dobby are among the leading practitioners in the field. Column Flotation covers both fundamental and applied aspects. Following an examination of the properties of the collection and froth zones, there is detailed treatment of cleaning and selectivity, focussing on their dependence on operating variables. It concludes with an examination of the practical questions of column simulation, scale-up and control. The book is profusely illustrated throughout, with comprehensive glossary and nomenclature sections to assist newcomers to the field. Invaluable reading for mineral processing and chemical engineers, both practising and students, it provides a solid foundation to this rapidly emerging technique.
Download or read book Froth Flotation written by Maurice C. Fuerstenau and published by SME. This book was released on 2007 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;Froth Flotation: A Century of Innovation comprehensively describes state-of-the-art research and practice in mineral froth flotation a century after its introduction. Recognized experts from around the world provide in-depth coverage on many facets of flotation, including the historical aspects; fundamentals; chemistry; flotation cells, modeling, and simulation; and flotation plant practice. This commemorative volume is an invaluable reference for industry professionals, researchers, and graduate students."--BOOK JACKET.
Download or read book The Use of Column Flotation in the Downstream Processing of Fermentation Products written by Everson Alves Miranda and published by . This book was released on 1993 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Column Flotation 88 written by and published by . This book was released on 1988 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Designing the Coal Preparation Plant of the Future written by Barbara J. Arnold and published by SME. This book was released on 2007 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most books on coal preparation focus on theory or day-to-day issues and operations. Designing the Coal Preparation Plant of the Future provides a unique, thought-provoking look at the industry from a different point of view--that of the preparation plant designer or engineer. How can we design more efficient plants, and what will plants look like in the future? What are the new techniques for designing plant layouts, monitoring performance, and building in preventive maintenance? What challenges face the industry and how can operators capitalize on opportunities to maximize yield, reduce costs, and improve efficiency? The 15 informative, meticulously researched chapters provide a compelling road map of where we've been and where we need to go, what we're doing today, and, most importantly, how we can do it better. Internationally respected experts address these and other issues, offering cutting-edge insights and compelling case histories from industry leaders throughout the world. Generously illustrated with photos and diagrams, Designing the Coal Preparation Plant of the Future is a big-picture, yet practical, how-to resource for practitioners, students, and faculty. Designing the Coal Preparation Plant of the Future is truly groundbreaking work for an industry where groundbreaking is a long-standing, proud tradition.
Download or read book Extractive Metallurgy of Molybdenum written by C.K. Gupta and published by Routledge. This book was released on 2017-11-13 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extractive Metallurgy of Molybdenum provides an up-to-date, comprehensive account of the extraction and process metallurgy fields of molybdenum. The book covers the history of metallurgy of molybdenum from its beginnings to the present day. Topics discussed include molybdenum properties and applications, pyrometallurgy of molybdenum, hydrometallurgy of molybdenum, electrometallurgy of molybdenum, and a survey of molybdenum resources and processing. The book will be a useful reference for metallurgists, materials scientists, researchers, and students. It will also be an indispensable guide for world producers, processors, and traders of molybdenum.
Download or read book National Workshop and Seminar on Sustainable Development of Coastal Placer Minerals written by and published by Allied Publishers. This book was released on 2004 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the conference organized by Central Mining Research Institute, Dhanbad; with reference to India.
Download or read book Mathematical Modeling of Spontaneous Heating of a Coalbed written by John C. Edwards and published by . This book was released on 1990 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Processing of Complex Ores written by G. S. Dobby and published by Elsevier. This book was released on 2017-05-17 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: A broad spectrum of the subject from basic research to plant applications has been covered. Flotation and hydrometallurgy have attracted a good deal of interest in view of their growing importance in the processing of complex ores. Physical methods including magnetic and gravity separation techniques have received attention in the processing of tantalum, niobium and tungsten. In addition, a set of papers is devoted to expert systems and their applications in mineral processing plants.
Download or read book Mineral Exploration written by Swapan Kumar Haldar and published by Elsevier. This book was released on 2018-07-14 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mineral Exploration: Principles and Applications, Second Edition, presents an interdisciplinary approach on the full scope of mineral exploration. Everything from grass root discovery, objective base sequential exploration, mining, beneficiation, extraction, economic evaluation, policies and acts, rules and regulations, sustainability, and environmental impacts is covered. Each topic is presented using theoretical approaches that are followed by specific applications that can be used in the field. This new edition features updated references, changes to rules and regulations, and new sections on oil and gas exploration and classification, air-core drilling, and smelting and refining techniques. This book is a key resource for both academics and professionals, offering both practical and applied knowledge in mineral exploration. Offers important updates to the previous edition, including sections on the cyclical nature of mineral industry, exploration for oil and gas, CHIM-electro-geochemical survey, air-core drilling, classification of oil and gas resources, smelting, and refining technologies Presents global case studies that allow readers to quickly apply exploration concepts to real-world scenarios Includes 385 illustrations and photographs to aid the reader in understanding key procedures and applications
Download or read book Production and Processing of Fine Particles written by A. J. Plumpton and published by Elsevier. This book was released on 2017-05-04 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of an international symposium organised by the Metallurgical Society of the Canadian Institute of Mining and Metallurgy. The aims of the symposium were to discuss fundamental and practical aspects of the technology for the production of fine inorganic particles for the metals, industrial minerals and advanced ceramics sectors, to highlight particle characterization methods and developments, and to review major advances in the processing and extractive metallurgy of finely-sized minerals. 96 conference papers by authors from 19 countries addressed such topics as particle morphology and size analysis, physical and chemical methods for producing fine particles, processing of minerals using gravity, magnetic and electrostatic separation, flotation and flocculation, phase separation involving fine particles, and the hydrometallurgy and pyroprocessing of fine particles. This book will be of interest to mineral processing scientists and engineers, ceramicists, extractive metallurgists and chemical engineers, who are faced with the increasing significance of inorganic fine particles either as valuable products or as materials to be treated in mineral processing systems.
Download or read book SME Mineral Processing and Extractive Metallurgy Handbook written by Courtney A. Young and published by Society for Mining, Metallurgy & Exploration. This book was released on 2019-02-01 with total page 2258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This landmark publication distills the body of knowledge that characterizes mineral processing and extractive metallurgy as disciplinary fields. It will inspire and inform current and future generations of minerals and metallurgy professionals. Mineral processing and extractive metallurgy are atypical disciplines, requiring a combination of knowledge, experience, and art. Investing in this trove of valuable information is a must for all those involved in the industry—students, engineers, mill managers, and operators. More than 192 internationally recognized experts have contributed to the handbook’s 128 thought-provoking chapters that examine nearly every aspect of mineral processing and extractive metallurgy. This inclusive reference addresses the magnitude of traditional industry topics and also addresses the new technologies and important cultural and social issues that are important today. Contents Mineral Characterization and AnalysisManagement and ReportingComminutionClassification and WashingTransport and StoragePhysical SeparationsFlotationSolid and Liquid SeparationDisposalHydrometallurgyPyrometallurgyProcessing of Selected Metals, Minerals, and Materials
Download or read book International Coal Preparation Congress 2010 Conference Proceedings written by Rick Q. Honaker and published by SME. This book was released on 2010 with total page 993 pages. Available in PDF, EPUB and Kindle. Book excerpt: The challenges facing the coal preparation industry have never been more complex or daunting: China, India, and South Africa are experiencing unprecedented growth in the use of coal. India is expected to be the world's largest importer of coal through 2030. New environmental regulations in the United States and elsewhere are forcing operators to be even more innovative and resourceful. How will the burgeoning demand affect global pricing? How can coal preparation companies employ more effective cleaning processes and technologies to reduce the environmental footprint of their mining facilities and waste storage areas? You'll find answers to these and hundreds of other critical questions in International Coal Preparation Congress: 2010 Conference Proceedings. This 992-page book is a compilation of 118 state-of-the-art technical papers presented at the industry's most prestigious gathering. A CD containing the full text is included. Read what coal preparation experts from 20 countries have to share on a variety of current issues.
Download or read book Hydrometallurgy written by Suresh Bhargava and published by MDPI. This book was released on 2018-07-02 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Hydrometallurgy" that was published in Metals
Download or read book Mineral Processing on the Verge of the 21st Century written by C. Hicyilmaz and published by Routledge. This book was released on 2017-10-06 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers covers many topics in the area of mineral processing, such as: physical enrichment processing; fine particle processing; flotation fundamentals and technology; industrial minerals processing; and waste treatment and utilization.
Download or read book New Trends in Coal Preparation Technologies and Equipment written by Wieslaw S. Blaschke and published by Taylor & Francis. This book was released on 1995-09 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 2004. Routledge is an imprint of Taylor & Francis, an informa company.
