Download or read book Colour Formation in Pulp and Paper Wastewaters During Biological Treatment written by Craig Brennan Milestone and published by . This book was released on 2007 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater colour is of concern in the pulp and paper industry as regulations place strict limits on wastewater quality and aesthetic appeal. In some treatment systems increases in colour occur, meaning that maximum daily limits are exceeded and mills may fail discharge standards. This study specifically addressed the colour formation issue for the first time. A multi-site industrial survey confirmed previous anecdotal evidence that colour formation of up to 40% occurs in whole mill effluents treated using aerated stabilisation basins. In-depth field studies of a specific treatment system showed that colour formation was initiated in low dissolved oxygen zones. The importance of biological anaerobic activity was confirmed using continuous and batch reactors, where colour formation was shown to be correlated to oxygen availability. Batch studies showed that in-mill wastewaters high in lignin-derived material, such as bleaching or thermomechanical pulping effluents had greater colour forming potential. Wastewaters low in lignin, such as papermachine effluents, showed less colour forming potential. Combinations of effluents with high and low colour forming potential led to greater colour increases than predicted from the individual effluents alone. Fractionation of pulp bleaching wastewaters based on molecular weight showed that colour formation occurs in high molecular mass (HMM) material. Absence of HMM material effectively removed the potential for colour increases during biological treatment. Previously reported mechanisms ascribing colour formation to reactions between anaerobically produced monomers were not supported experimentally. Reactions between such monomers and HMM also did not produce colour increases. Overall, this study of colour behaviour in these complex systems has presented complex challenges. Combining fundamental studies on colour function and behaviour with laboratory assay-directed studies and in-mill assessments will assist the industry in identifying realistic colour management strategies that provide overall environmental benefits to the sector. Studies on fractionated bleaching wastewaters showed HMM acted as an electron acceptor for bacterial growth and could increase its colour through structural changes, such as the formation of quinonoid chromophores. Increases in colour were inhibited when electron acceptors of greater energy than HMM were present. Colour increases also correlated well with the availability and removal of suitable electron donor material.
Download or read book The Behaviour of Colour During Biological Treatment of Pulp and Paper Wastewater written by Craig Brennan Milestone and published by . This book was released on 2002 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Review of Colour Removal Technology in the Pulp and Paper Industry written by R. J. Rush and published by Water Pollution Control Directorate : Supply and Services Canada. This book was released on 1976 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The pulp and paper industry produces large volumes of effluent containing, among other things, dark brown lignin and lignin degradation products. The exact nature of the chromophoric (colour causing) groups in the wastes and the effects of these colour bodies on the aquatic environment are not known. However, developmental work on several processes for colour reduction has reached full scale application and colour removal is now required in many local areas for various reasons. Colour reduction can be achieved by either technical changes within the mill or by effluent treatment systems. In-plant modification can range from simple, inexpensive measures such as pulp washing and better "housekeeping" practices, to complex technological changes such as implementation of oxygen bleaching. While in-plant changes should be considered and implemented as a first preference, external treatment may often still be required. There are a large number of external treatment methods which are known to be technically feasible for colour removal from pulp and paper mill effluents.
Download or read book Biological Wastewater Treatment and Resource Recovery written by Robina Farooq and published by BoD – Books on Demand. This book was released on 2017-03-29 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biological treatment of wastewater is a low-cost solution for remediation of wastewater. This book focuses on the bioremediation of wastewater, its management, monitoring, role of biofilms on wastewater treatment and energy recovery. It emphasizes on organic, inorganic and micropollutants entering into the environment after conventional wastewater treatment facilities of industrial, agricultural and domestic wastewaters. The occurrence of persistent pollutants poses deleterious effects on human and environmental health. Simple solution for recovery of energy as well as water during biological treatment of wastewater is a viable option. This book provides necessary knowledge and experimental studies on emerging bioremediation processes for reducing water, air and soil pollution.
Download or read book Pulp and Paper Wastewater Color Removal written by Parsa Pezeshk and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulp and paper industries generate highly-colored wastewaters, the color of which is not removed by conventional biological treatment. As a result, the persistent color of the wastewater can potentially disrupt the aesthetic appearance of the recieving stream as well as releasing potentially toxic compounds to the environment. Coagulation and flocculation is a chemical treatment practiced to remove color from pulp and paper mill wastewaters. The main focus of this work was to study the color removal efficiency of coagulation/flocculation treatment on a specialty pulp and paper mill wastewater located in the State of Tennessee. In this regard, the effect of coagulant, coagulant aid, and flocculent dosages as well as the wastewater pH and temperature on color removal process were examined. Furtheremore, bentonite clay and powdered activated carbon (PAC) effectiveness for color removal were tested.
Download or read book Biological Treatment of Industrial Wastewater written by Maulin P Shah and published by Royal Society of Chemistry. This book was released on 2021-11-18 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many industrial processes use water as a solvent and therefore produce wastewater containing chemicals from that process. The amounts of these chemicals and the types will vary hugely depending on the industry and the processes running and may include things that are hazardous to health or the environment. This makes the treatment of industrial wastewater both extremely important and highly complex. One route for industrial wastewater treatment is the use of bioreactors. Biological Treatment of Industrial Wastewater presents a comprehensive overview of the latest advances and trends in the use of bioreactors for treating industrial wastewater. Several different types of bioreactor and their applications are discussed, alongside trends and considerations important in designing bioreactors. Bringing together a wealth of different approaches and voices this book will be a useful resource for anyone working in water treatment or looking at how industrial processes can be made more environmentally friendly.
Download or read book Advances in Biological Treatment of Industrial Waste Water and their Recycling for a Sustainable Future written by Ram Lakhan Singh and published by Springer. This book was released on 2018-10-12 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: With rampant industrialization, the management of waste generated by various industries is becoming a mammoth problem. Wastewater discharges from industrial and commercial sources may contain pollutants at levels that could affect the quality of receiving waters or interfere with potable water supplies. Thousands of small and large-scale industrial units dump their waste, which is often toxic and hazardous, in open spaces and nearby water sources. Over the last three decades, many cases of serious and permanent damage to the environment and human health on the part of these industries have come to the fore. This book mainly focuses on the biological treatment of wastewater from various industries, and provides detailed information on the sources and characteristics of this wastewater, followed by descriptions of the biological methods used to treat them. Individual chapters address the treatment of wastewater from pulp and paper mills; tanneries; distilleries, sugar mills; the dairy industry; wine industry; textile industry; pharmaceutical industry; food processing industry; oil refinery/petroleum industry; fertilizer industry and beverage/ soft drink bottling industry; and include the characteristics of wastewater, evaluation of biological treatment methods, and recycling of wastewater. Easy to follow, with simple explanations and a good framework for understanding the complex nature of biological wastewater treatment processes, the book will be instrumental to quickly understanding various aspects of the biological treatment of industrial wastewater. It will serve as a valuable reference book for scientists, researchers, educators, and engineers alike.
Download or read book Anaerobic Technology in Pulp and Paper Industry written by Pratima Bajpai and published by Springer. This book was released on 2017-03-14 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a state-of-the-art report on the treatment of pulp and paper industry effluents using anaerobic technology. It covers a comprehensive range of topics, including the basic reasons for anaerobic treatment, comparison between anaerobic and aerobic treatment, effluent types suitable for anaerobic treatment, design considerations for anaerobic treatment, anaerobic reactor configurations applied for treatment of pulp and paper industry effluents, present status of anaerobic treatment in pulp and paper industry, economic aspects, examples of full scale installations and future trends.
Download or read book Handbook on Pulp and Paper Processing written by NPCS Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2008-10-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: The pulp and paper industry comprises companies that use wood as raw material and produce pulp, paper, board and other cellulose based products. The pulp and paper sector presents one of the energy intensive and highly polluting sectors within the Indian economy and is therefore of particular interest in the context of both local and global environmental discussions. Increases in productivity through the adoption of more efficient and cleaner technologies in the manufacturing sector will be most effective in merging economic, environmental, and social development objectives. Papers are mostly used product starting from writing to packaging. It plays an important role in commercial field as well as in academic field also. Without paper nothing is expressible and reliable, so paper is part and parcel of our life. Adequate amount of raw materials for processing paper and pulp is available. Bamboo is the main raw material for Indian paper industry. New bamboo areas even at high cost are being trapped. Some of the examples of high yield pulping process are mechanical process, semi chemical process, alkaline chemical process, sulfite process, etc. Physical strength properties of paper depend on the quality of raw material, its pulping, bleaching and subsequent paper making processes. Technology has made it easy to process these raw materials in an economic and lucrative way to meet the global demand. Raw materials like, straw, bagasse, wood, bamboo is almost available in most of the places. So it is great opportunity for the entrepreneurs to start up such kind of industry. Paper Industry has tremendously increased in India in the last 20 to 30 yrs. The Paper industry is a priority sector for foreign collaboration and foreign equity participation up to 100% receives automatic approval by Reserve Bank of India. Several fiscal incentives have also been provided to the paper industry, particularly to those mills which are based on non conventional raw material. Some of the fundamentals of the book are bleaching of bamboo cold, high yield semi chemical pulping of mixture of bamboo and mixed hardwoods, sulphate semi chemical process, kraft green liquor semi chemical process, neutral sulphite semi chemical process, thermo mechanical pulps for newsprint, zeta potential concept in paper sizing, sodium carbonate in alkali extraction during bleaching bamboo , maintenance engineering in pulp and paper industry, design and application of refiners in stock preparation, paper machine effluent etc. This book explains about the various raw material, their processing and utilizations and also the possible waste treatment of such paper and pulp making industry. To draw attention for manufacturing quality product with all possible latest technologies is the main purpose of this book. The book is very resourceful for new entrepreneurs, technocrats, existing units and research scholars.
Download or read book Bleach Plant Effluents from the Pulp and Paper Industry written by Pratima Bajpai and published by Springer Science & Business Media. This book was released on 2013-06-22 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers bleach plant effluents, that most polluting effluent from the pulp and paper industry. Disappearance of benthic invertebrates, a high incidence of fish diseases, and mutagenic effects on the aquatic fauna are some of the consequences of the disposal of bleach effluents into surface waters. This book describes environmental impact of bleach plant effluents, environmental regulations, and measures to reduce the pollution load by internal process modification and external treatment of bleach plant effluents.
Download or read book biochecmical sciences health and environmental aspects written by and published by Allied Publishers. This book was released on with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2008 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Review of Color Color Measurement and Color Formation in Pulp and Paper Mill Sewers and Wastewater Treatment Plants written by Jeffrey Louch and published by . This book was released on 2011 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Environmental Materials Management written by Chaudhery Mustansar Hussain and published by Springer. This book was released on 2019-06-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference work analyzes and assesses global environmental management techniques for environmental materials with a focus on their performance and economic benefits, proposing eco-friendly solutions and designating policies that will sustain the environment for future generations. It addresses management of environmental materials as not only a complex anthropogenic problem, but also as an expensive problem that needs to be managed sustainably. Simultaneously, it considers the environmental and economic benefits involved in the high levels of investment and operation costs required to develop effective materials collection and management systems in modern society.
Download or read book Biological Approaches in Dye Containing Wastewater written by Ali Khadir and published by Springer Nature. This book was released on 2022-03-30 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: The textile industry segment has been continuously expanding and it is reported that the global market was US$1000 billion in 2020. Aside from the fact that textile industry could be profitable and offers several advantages for human life, this industry produces wastewater containing many harmful substances in the form of organic and inorganic moieties. Textile wastewater can lead to serious environmental problems if discharged without treatment. In this first volume of the application of biological mechanisms, processes and units are reviewed in terms of dye degradation and removal. The role of biodegradation, bioaccumulation and biosorption in bio-decolorization are discussed. The book starts with highlighting the fundamentals of aerobic and anaerobic mechanisms having different configurations. The moving bed bioreactor (MBBR), up-flow anaerobic sludge blanket reactors, sequential aerobic/anaerobic batch reactors, membrane bioreactor, etc are also covered in this edition.
Download or read book Biological Treatment of Industrial Wastewater written by Maulin P. Shah and published by Royal Society of Chemistry. This book was released on 2021-12-03 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biological Treatment of Industrial Wastewater presents a comprehensive overview of the latest advances and trends in the use of bioreactors for treating industrial wastewater.
Download or read book INDUSTRIAL WASTE WATER TREATMENT written by A. D. PATWARDHAN and published by PHI Learning Pvt. Ltd.. This book was released on 2008-05-07 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: All industrial production processes generate waste waters, which can pollute water bodies into which they are discharged without adequate treatment. It is, therefore, essential to treat such wastes and eliminate their harmful effects on the environment. This book discusses sources, characteristics and treatment of waste waters produced in industries such as textiles, dairy, tanneries, pulp and paper, fertilizer, pesticide, organic and inorganic chemicals, engineering and fermentation. Many flow diagrams have been included to illustrate industrial processes and to indicate the sources of waste water in such processes. After describing treatment for individual factories, the author discusses the more advanced and economical common effluent plants. The text uses simple and straightforward language and makes the presentation attractive. This book should prove extremely useful to undergraduate students of civil and chemical engineering and postgraduate students of environmental science and engineering. Industrial design consultants will also find the book very handy. To the Greens, it may offer some of the solutions to their concerns.
