Download or read book Coloring of Plastics written by Robert A. Charvat and published by John Wiley & Sons. This book was released on 2005-02-25 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This latest edition of Coloring of Plastics: Fundamentals offers an updated introduction to color as a science while also providing the foundation for many additional technological subjects. The basic families of colorants are described, along with their properties. The material examines how statistical analysis can improve the consistency of colored polymer production runs as well as the colorants used to match the color. Other important topics covered in Coloring of Plastics: Fundamentals, Second Edition include: * Environmental issues and the reuse of discarded material * Potential problems with the interaction between colorants and other additives * Measurement information and matching, visually and instrumentally * Techniques for incorporating colorants into polymers as compounds or concentrates * Special effect colorants Polymer and colorant manufacturers, plastics compounders, and coating and synthetic fiber industries will acquire an enhanced appreciation of the complex technological issues a colorist must consider if a plastics coloring project is to succeed.
Download or read book Coloring of Plastics written by Robert A. Charvat and published by John Wiley & Sons. This book was released on 2003-11-24 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This latest edition of Coloring of Plastics: Fundamentals offers an updated introduction to color as a science while also providing the foundation for many additional technological subjects. The basic families of colorants are described, along with their properties. The material examines how statistical analysis can improve the consistency of colored polymer production runs as well as the colorants used to match the color. Other important topics covered in Coloring of Plastics: Fundamentals, Second Edition include: * Environmental issues and the reuse of discarded material * Potential problems with the interaction between colorants and other additives * Measurement information and matching, visually and instrumentally * Techniques for incorporating colorants into polymers as compounds or concentrates * Special effect colorants Polymer and colorant manufacturers, plastics compounders, and coating and synthetic fiber industries will acquire an enhanced appreciation of the complex technological issues a colorist must consider if a plastics coloring project is to succeed.
Download or read book Coloring Technology for Plastics written by Ronald M. Harris and published by William Andrew. This book was released on 1999-12-31 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this anthology were presented during seven ANTEC and RETEC symposia between 1995 and 1998, and chronicle many of the advances in the plastics coloring technology field during that time span. The unifying theme of the papers is ""creating more value."" The interactivity of the package design process has continued to demand advances in coloring technology, and the value of being able to exploit product appearance is glaringly apparent. Another way to create value is by being responsive through ""Speed to Market."" Manufacturers and suppliers have to respond to the demand of their consumers, yet fabricators cannot be ignored in their desire for first run acceptance of color. All these issues and many others are discussed within this authoritative overview of coloring technology.
Download or read book Coloring of Plastics written by Albrecht Müller and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2012-11-12 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The successful coloring of plastic parts, beginning with the formulation of the color preparation and ending with the manufacture of the final product, is the result of the interaction of chemical, physical, and technological factors. In-depth knowledge of these factors and their interrelation and the consideration of national and international regulations are prerequisite for anyone working in this field. This book describes the various aspects of coloring plastics. The reader is enabled to identify the color preparation that meets given product requirements. Only if color preparation, polymer material, and final product design and requirements are well coordinated will the customer be pleased with the colored plastic product. Contents: - Methods for Coloring of Plastics - Requirements for Color Preparations - Composition of Color Preparations - Colorants and Additives - Processing Errors and Troubleshooting - Quality Assurance - National/International Regulations
Download or read book Polymer Modifiers and Additives written by Richard F. Grossman and published by CRC Press. This book was released on 2000-11-08 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Outlines the benefits of using additives-individually or in combination-to modify the properties and processability of pure polymers, and discusses easy-to-understand theory and practical applications for immediate economic and performance improvements."
Download or read book Developments in Colorants for Plastics written by Ian Christensen and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: At a time when it is critical to many plastics processors to add value to products, colorants are an essential part of the additives repertoire. Plastics are often processed at very high temperatures and shear, and products are exposed to heat and light. Colorants must tolerate these conditions to function adequately. This Rapra Review Report provides practical information for plastics processors with regard to colorant selection and the range of products and effects available. The review is accompanied by around 400 abstracts from the Rapra Polymer Library database, to facilitate further reading on this subject.
Download or read book Kirk Othmer Concise Encyclopedia of Chemical Technology 2 Volume Set written by Kirk-Othmer and published by John Wiley & Sons. This book was released on 2007-07-16 with total page 2762 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an easily-accessible two-volume encyclopedia summarizing all the articles in the main volumes Kirk-Othmer Encyclopedia of Chemical Technology, Fifth Edition organized alphabetically. Written by prominent scholars from industry, academia, and research institutions, the Encyclopedia presents a wide scope of articles on chemical substances, properties, manufacturing, and uses; on industrial processes, unit operations in chemical engineering; and on fundamentals and scientific subjects related to the field.
Download or read book Additives For Plastics written by Raymond Seymour and published by Elsevier. This book was released on 2012-12-02 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additives for Plastics: Volume 1, State of the Art summarizes the state of the art about additives for plastics, including coupling agents for fillers and plasticizers, as well as colorants, silicas, cellulose fiber, whiskers, and microfibers. Stabilizers for weather, fungal, and heat resistance and resistance to ultraviolet radiation are also considered. This volume is comprised of 13 chapters; the first of which introduces the reader to nonreinforcing fillers such as carbon black, wood flour, alpha cellulose, calcium carbonate, and natural and synthetic silicates. The discussion then turns to synthetic and naturally occurring silicas, short cellulose fibers for reinforcing polymers, and asbestiform fillers. Whiskers and microfibers are the subject of the subsequent chapter, with emphasis on their differences and similarities, application in various plastics, and prospects. Silane and nonsilane coupling agents, nonfiller additives, plasticizers, biocides, and heat stabilizers are also examined. This volume also evaluates rutile titanium dioxide and other white pigments with regard to the opacification and coloring of plastics. This book will be of vital interest to those who are closely associated with the plastics industry as well as those who are concerned with the design, fabrication, and use of plastics.
Download or read book Extruding Plastics written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: Worldwide, extrusion lines successfully process more plastics into prod ucts than other processes by consuming at least 36 wt% of all plastics. They continue to find practical solutions for new products and/ or prob lems to meet new product performances. This book, with its practical industry reviews, is a unique handbook (the first of its kind) that covers over a thousand of the potential combina tions of basic variables or problems with solutions that can occur from up-stream to down-stream equipment. Guidelines are provided for maxi mizing processing efficiency and operating at the lowest possible cost. It has been prepared with an awareness that its usefulness will depend greatly upon its simplicity and provision of essential information. It should be useful to: 0) those already extruding and desiring to obtain additional information for their line and/ or prOVide a means of reviewing other lines that can provide their line with operating improvements; (2) those processing or extruding plastics for the first time; (3) those consider ing going into another extrusion process; (4) those desiring additional information about employing the design of various products more effi ciently, with respect to both performance and cost; (5) those contemplat ing entering the business of extrusion; (6) those in new venture groups, materials development, and/ or market development; (7) those in disci plines such as nonplastics manufacturers, engineers, designers, quality control, financial, and management; and (8) those requiring a textbook on extrusion in trade schools and high schools or colleges.
Download or read book Plastics Materials and Processes written by Charles A. Harper and published by John Wiley & Sons. This book was released on 2003-10-10 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics Materials and Processes: A Concise Encyclopedia is a resource for anyone with an interest in plastic materials and processes, from seasoned professionals to laypeople. Arranged in alphabetical order, it clearly explains all of the materials and processes as well as their major application areas and usages. Plastics Materials and Processes: A Concise Encyclopedia: Discusses and describes applications and practical uses of the materials and processes. Clear definitions and sufficient depth to satisfy the information seekers needs
Download or read book Service Life Prediction of Exterior Plastics written by Christopher C. White and published by Springer. This book was released on 2014-09-04 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book defines the current state-of-the-art for predicting the lifetime of plastics exposed to weather and outlines the future research needed to advance this important field of study. Coverage includes progress in developing new science and test methods to determine how materials respond to weather exposure. This book is ideal for researchers and professionals working in the field of service life prediction. This book also: Examines numerous consensus standards that affect commercial products allowing readers to see the future of standards related to service life prediction Provides scientific foundation for latest commercially viable instruments Presents groundbreaking research including the blueprint of a new test method that will significantly shorten the service life prediction process time Covers two of the latest verified predictive models, which demonstrate realized-potential to transform the field
Download or read book Plastics and Molded Products written by and published by . This book was released on 1928 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tool and Manufacturing Engineers Handbook Plastic Part Manufacturing written by Philip Mitchell and published by Society of Manufacturing Engineers. This book was released on 1996-12-09 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the practical application of processes for manufacturing plastic products. It includes information on design for manufacturability (DFM), material selection, process selection, dies, molds, and tooling, extrusion, injection molding, blow molding, thermoforming, lamination, rotational molding, casting, foam processing, compression and transfer molding, fiber reinforced processing, assembly and fabrication, quality, plant engineering and maintenance, management.
Download or read book Proceedings of the Second International Conference on Marine Debris written by and published by . This book was released on 1990 with total page 1314 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Color for Science Art and Technology written by Kurt Nassau and published by Elsevier. This book was released on 1997-12-18 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to assemble a series of chapters, written by experts in their fields, covering the basics of color - and then some more. In this way, readers are supplied with almost anything they want to know about color outside their own area of expertise. Thus, the color measurement expert, as well as the general reader, can find here information on the perception, causes, and uses of color. For the artist there are details on the causes, measurement, perception, and reproduction of color. Within each chapter, authors were requested to indicate directions of future efforts, where applicable. One might reasonably expect that all would have been learned about color in the more than three hundred years since Newton established the fundamentals of color science. This is not true because:• the measurement of color still has unresolved complexities (Chapter 2)• many of the fine details of color vision remain unknown (Chapter 3)• every few decades a new movement in art discovers original ways to use new pigments, and dyes continue to be discovered (Chapter 5)• the philosophical approach to color has not yet crystallized (Chapter 7)• new pigments and dyes continue to be discovered (Chapters 10 and 11)• the study of the biological and therapeutic effects of color is still in its infancy (Chapter 2).Color continues to develop towards maturity and the editor believes that there is much common ground between the sciences and the arts and that color is a major connecting bridge.
Download or read book Modern Technology of Textile Dyes Pigments 2nd Revised Edition written by H. Panda and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2016-05-01 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dyestuff sector is one of the core chemical industries in India. There are two types of colorants dyes and pigments. Dyes are soluble substances used to pass color to the substrate and find applications primarily in textiles and leather. Pigments are coloring materials, which are water insoluble. Key end-user industries of pigments include wood-coloring, stone, textiles, paints & coatings, food and metals. Pigment are usually manufactured as dry colorants and grounded into fine powder. The dyes market, meanwhile, largely depends upon the fortunes of its principal end-user, textiles, which account for about 70 percent of the total demand. Their importance has grown in almost every area of an economic activity. In the colorants market, Asia-Pacific accounts for the largest share. This region is one of the key markets for dyes and pigments production. In the Asia-Pacific, India and China are the important countries contributing towards the growth of colorants market. Rising consumer spending will drive increased demand for colorants in textiles. Increases in value demand will reflect the growing importance of expensive, higher value dyes and pigments that meet increasingly stringent performance standards. Growing demand for high-quality value-added pigments is one of the key factors expected to result in a spurt in growth. This book describes the various formulae, manufacturing processes and photographs of plant & machinery with supplier’s contact details. The major contents of the book are metal pigments, black pigments, inorganic colour pigments, organic colour pigments, extender pigments, white pigments, photocatalytic activity of titanium dioxide pigment, azo pigments, bisazo pyridine pigments, high grade organic pigments, high temperature stable inorganic pigments, anti corrosive pigments, metals and metal ions in pigmentary systems, control of organic pigment dispersion properties, pigments for plastics, rubber & cosmetics, pigments for printing inks, vat dyes, reactive dyes, disperse dyes, direct dyes and sulphur dyes etc. It will be a standard reference book for professionals, entrepreneurs, those studying and researching in this important area and others interested in the field of textile dyes & pigments.
Download or read book Injection Molding Handbook written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition has been written to thoroughly update the coverage of injection molding in the World of Plastics. There have been changes, including extensive additions, to over 50% of the content of the second edition. Many examples are provided of processing different plastics and relating the results to critiCal factors, which range from product design to meeting performance requirements to reducing costs to zero-defect targets. Changes have not been made that concern what is basic to injection molding. However, more basic information has been added concerning present and future developments, resulting in the book being more useful for a long time to come. Detailed explanations and interpretation of individual subjects (more than 1500) are provided, using a total of 914 figures and 209 tables. Throughout the book there is extensive information on problems and solutions as well as extensive cross referencing on its many different subjects. This book represents the ENCYCLOPEDIA on IM, as is evident from its extensive and detailed text that follows from its lengthy Table of CONTENTS and INDEX with over 5200 entries. The worldwide industry encompasses many hundreds of useful plastic-related computer programs. This book lists these programs (ranging from operational training to product design to molding to marketing) and explains them briefly, but no program or series of programs can provide the details obtained and the extent of information contained in this single sourcebook.
