Download or read book Proceedings of the 17th International Conference on the Physics of Semiconductors written by J.D. Chadi and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 1580 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Proceedings of the 17th International Conference on the Physics of Semiconductors are contained in this volume. A record 1050 scientists from 40 countries participated in the Conference which was held in San Francisco August 6·1 0, 1984. The Conference was organized by the ICPS Committee and sponsored by the International Union of Pure and Applied Physics and other professional, government, and industrial organizations listed on the following pages. Papers representing progress in all aspects of semiconductor physics were presented. Far more abstracts (765) than could be presented in a five-day meeting were considered by the International Program Committee. A total of 350 papers, consisting of 5 plenary, 35 invited, and 310 contributed, were presented at the Conference in either oral or poster sessions. All but a few of the papers were submitted and have been included in these Proceedings. An interesting shift in subject matter, in comparison with earlier Conferences, is manifested by the large number of papers on surfaces, interfaces, and quantum wells. To facilitate the use of the Proceedings in finding closely related papers among the sometimes relatively large number of contributions within a main subject area, we chose not to arrange the papers strictly according to the Conference schedule. We have organized the book, as can be seen from the Contents, into specific subcategories and subdivisions within each major category. Plenary and invited papers have been placed together with the appropriate contributed papers.
Download or read book Proceedings of the Symposium on Electrochemistry and Solid State Science Education at the Graduate and Undergraduate Level written by W. H. Smyrl and published by . This book was released on 1987 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Ceramic Interfaces written by M. Rühle and published by Elsevier. This book was released on 2013-10-22 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: As engineering materials and structures often contain a metal or metallic alloy bonded to a ceramic, the resultant interface must be able to sustain mechanical forces without failure. They also play an important role in oxidation or reduction of materials. The workshop on 'Bonding, Structure and Mechanical Properties of Metal/Ceramic Interfaces' was held in January 1989 within the Acta/Scripta Metallurgica conference series. It drew together an international collection of 70 scientists who discussed a wide range of issues related to metal-ceramic interfaces. The sessions were divided into 7 categories: structure and bonding, chemistry at interfaces, formation of interfaces, structure of interfaces, thermodynamics/atomistics of interface fracture, mechanics of interface cracks, and fracture resistance of bimaterial interfaces. Within these headings attention was paid to grain boundaries, the influence of chemical processes on the behaviour of interfaces, diffusion bonding, characterization of fracture, and crack propagation by fatigue and by stress corrosion. The book presents a useful reference source for materials scientists, physicists, chemists, and mechanical engineers who are concerned with the roles and properties of interfaces.
Download or read book Fourth E C Photovoltaic Solar Energy Conference written by W.H. Bloss and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper is written in the belief that people are important and that equipment is to serve the needs of the people and therefore should be designed to meet their specific needs and environment. This is particularly important in the case of a developing country when a professional engineer accepts the responsibility to formulate policies evaluate equipment imple ment projects and train national people. 1. Government, geography and climate Papua New Guinea, an independent and self governing state since 1975, is located directly North of Australia above the North Eastern State of Queensland. The country extends from 141° east longitude, at the border with Indonesia (Irian Jaya) to 160° east longitude and between latitudes 1° and 12° south (see figure 1). Papua New Guinea is a parliamentary democracy, with a single legis lature known as the National Parliament (1). The State is divided into 19 provinces plus the National Capital District (Port Moresby) with de centralized Government established in each province. Before independence the country comprised the Australian territory of Papua in the southern regions and the United Nations Trust Territory of New Guinea in the North (1). Land area is 462,840 square kilometres This inclUdes the mainland, the three large islands of New Britain, ~ew Ireland and fiougainville plus 600 small islands and archipelagos. Approximate direct distances from the capital city of Port Moresby to some of the other centres are : Vanimo 990 km, Rabaul SOO km, Arawa 990 km and Lorengau S25 km.
Download or read book Proceedings of the Ninth International Conference on Amorphous and Liquid Semiconductors Grenoble France July 2nd 8th 1981 written by B. K. Chakraverty and published by . This book was released on 1981 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Thermal Analysis and Calorimetry written by Michael E. Brown and published by Elsevier. This book was released on 2003-12-08 with total page 943 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of a four volume set intended to describe the techniques and applications of thermoanalytical and calorimetric methods. The general techniques and methodology are covered extensively in Volume 1, along with the fundamental physicochemical background needed. Consequently the subsequent volumes dwell on the applications of these powerful and versatile methods, while assuming a familiarity with the techniques.Volume 2 covers major areas of inorganic materials and some related general topics, e.g., catalysis, geochemistry, and the preservation of art. The chapters are written by established practitioners in the field with the intent of presenting a sampling of the how thermoanalytical and calorimetric methods have contributed to progress in their respective areas. The chapters are not intended as exhaustive reviews of the topics, but rather, to illustrate to the readers what has been achieved and to encourage them to consider extending these applications further into their domains of interest. - Provides an appreciation for how thermal methods can be applied to inorganic materials and processes.- Provides an insight into the versatility of thermal methods.- Shares the experiences of experts in a variety of different fields.- A valuable reference source covering a huge area of materials coverage.
Download or read book IUTAM Symposium on Mechanics of Martensitic Phase Transformation in Solids written by Qing-Ping Sun and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase transition phenomena in solids are of vital interest to physicists, materials scientists, and engineers who need to understand and model the mechanical behavior of solids during various kinds of phase transformations. This volume is a collection of 29 written contributions by distinguished invited speakers from 14 countries to the IUTAM Symposium on Mechanics of Martensitic Phase Transformation in Solids, the first IUTAM Symposium focusing on this topic. It contains basic theoretical and experimental aspects of the recent advances in the mechanics research of martensitic phase transformations. The main topics include microstructure and interfaces, material instability and its propagation, micromechanics approaches, interaction between plasticity and phase transformation, phase transformation in thin films, single and polycrystalline shape memory alloys, shape memory polymers, TRIP steels, etc. Due to the multidisciplinary nature of the research covered, this volume will be of interest to researchers, graduate students and engineers in the field of theoretical and applied mechanics as well as materials science and technology.
Download or read book Metal Support and Metal Additive Effects in Catalysis written by B. Imelik and published by Elsevier. This book was released on 2000-04-01 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal-Support and Metal-Additive Effects in Catalysis, Volume 11, documents the proceedings of an international symposium organized by the Institut de Recherches sur la Catalyse - CNRS – Villeurbanne and sponsored by the Centre National de la Recherche Scientifique, Ecully (Lyon), September 14-16, 1982. This volume contains 40 manuscripts that cover a wide range of topics. Among these are studies of metal-support interactions involving Pt/Al2O3, Pt/TiO2,Fe/TiO2, Pt/MgO, Rh /Al2O3, and Pt/CeO2 catalysts. There are also separate chapters dealing with ethane, n-butane, and cyclohexane hydrogenolysis; skeletal isomerization of methylpentanes; the catalytic activity and selectivity of noble metals; CO hydrogenation over supported on SiO2, Al2O3, Ti O2,and Zr O2 nickel catalysts; and the role of promoters in Pd catalysts for methanol synthesis. Subsequent chapters cover the poisoning of platinum and nickel by sulfur; C6H6 and CO chemisorption on Pt78Ni22 (111) single crystal alloy; the surface composition of industrial ammonia synthesis catalysts; and the role of alkalis and electronegative promoters on Fe and Ni catalysts.
Download or read book Progress in Atomic Spectroscopy written by W. Hanle and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: W. HANLE and H. KLEINPOPPEN In 1919, in the first edition of Atombau and Spektrallinien, Sommerfeld referred to the immense amount of information which had been accumu lated during the first period of 60 years of spectroscopic practice. Sommer feld emphasized that the names of Planck and Bohr would be connected forever with the efforts that had been made to understand the physics and the theory of spectral lines. Another period of almost 60 years has elapsed since the first edition of Sommerfeld's famous monograph. As the editors of this monograph, Progress in Atomic Spectroscopy, we feel that the present period is best characterized by the large variety of new spec troscopic methods that have been invented in the last decades. Spectroscopy has always been involved in the field of research on atomic structure and the interaction of light and atoms. The development of new spectroscopic methods (i.e., new as compared to the traditional optical methods) has led to many outstanding achievements, which, together with the increase of activity over the last decades, appear as a kind of renaissance of atomic spectroscopy.
Download or read book Proceedings of the Symposium on Thin Film Phenomena Interfaces and Interactions written by John E. E. Baglin and published by . This book was released on 1978 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Third Symposium on Materials and New Processing Technologies for Photovoltaics written by and published by . This book was released on 1982 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stability of Materials written by A. Gonis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering materials with desirable physical and technological properties requires understanding and predictive capability of materials behavior under varying external conditions, such as temperature and pressure. This immediately brings one face to face with the fundamental difficulty of establishing a connection between materials behavior at a microscopic level, where understanding is to be sought, and macroscopic behavior which needs to be predicted. Bridging the corresponding gap in length scales that separates the ends of this spectrum has been a goal intensely pursued by theoretical physicists, experimentalists, and metallurgists alike. Traditionally, the search for methods to bridge the length scale gap and to gain the needed predictive capability of materials properties has been conducted largely on a trial and error basis, guided by the skill of the metallurgist, large volumes of experimental data, and often ad hoc semi phenomenological models. This situation has persisted almost to this day, and it is only recently that significant changes have begun to take place. These changes have been brought about by a number of developments, some of long standing, others of more recent vintage.
Download or read book Low Temperature Electronics written by Edmundo A. Gutierrez-D. and published by Academic Press. This book was released on 2001 with total page 985 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes the advances in cryoelectronics starting from the fundamentals in physics and semiconductor devices to electronic systems, hybrid superconductor-semiconductor technologies, photonic devices, cryocoolers and thermal management. This book provides an exploration of the theory, research, and technologies related to cryoelectronics.
Download or read book Nuclear and Atomic Physics at One Gigaflop written by C. Bottcher and published by CRC Press. This book was released on 1989 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a workshop held at Oak Ridge, Tennessee, April 1988, deal with problems in atomic and nuclear physics that require access to supercomputing at effective rates of one gigaflop or more. Topics include strong fields, quarks, the few body problem, heavy-ion collisions, nuclear hydrodynamics, Monte Carlo techniques, and more. No subject index. Acidic paper. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Science And Technology Of An American Genius The Stanford R Ovshinsky written by Brian Schwartz and published by World Scientific. This book was released on 2008-10-09 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the achievements of the self-taught inventor, scientist, manufacturer and entrepreneur, Stanford R Ovshinsky. This remarkable individual could, without special training, compete with the well-funded establishments of learning and industry in the second half of the last century and leave us an incredible legacy of brilliant innovations with a lasting impact on our lives. His achievements extend over amazingly diverse fields and have or are prone to create new industries of great societal value.The phase change memories of commonly used rewritable CDs and DVDs as well as of new flash memories are his invention; so are the Ni Metal hydride batteries which are the enabling batteries for electric and hybrid/electric vehicles. The future hydrogen economy will utilize his efficient and safe hydrogen storage alloys. He has developed light and ultralight photovoltaic solar panels for converting sunlight into electricity and built the largest manufacturing facility for thin film flexible solar roofing materials. A common theme of his inventions is the synthesis of new materials utilizing novel aspects of structural and compositional disorder.The book explains for each of Ovshinsky's innovations the essence of his pioneering ideas and inventions. These introductions are followed by a selection of Ovshinsky's seminal publications and, for each subject category, a list of his patents which reveal the inventive mind of this unusually creative person. Ovshinsky's example of gaining a deep understanding of the science underlying his inventions, his perseverance as well as his ability to attract and inspire talented collaborators will be a role model for entrepreneurs of this century.
Download or read book Physical Properties of Amorphous Materials written by David Adler and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Institute for Amorphous Studies was founded in 1982 as the international center for the investigation of amorphous mate rials. It has since played an important role in promoting the und er standing of disordered matter in general. An Institute lecture series on "Fundamentals of Amorphous Materials and Devices" was held during 1982-83 with distinguished speakers from universities and industry. These events were free and open to the public ,and were attended by many representatives of the scientific community. The lectures themselves were highly successful inasmuch as they provided not only formal instruction but also an opportunity for vigorous and stimulating debate. That last element could not be captured within the pages of a book I but the lectures concentrated on the latest advances in the field I which is why their essential contents are he re reproduced in collective form. Together they constitute an interdisciplinary status report of the field. The speakers brought many different viewpoints and a variety of back ground experiences io bear on the problems involved I but though language and conventions vary I the essential unity of the concerns is very clear I as indeed are the ultimate benefits of the many-sided approach.
Download or read book Applied Quantum Chemistry written by Vedene H. Smith Jr. and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the proceedings of the Nobel Laureate Symposium on Applied Quantum Chemistry held during the International Chemical Congress of Pacific Basin Societies, 16-21 December 1984, in Honolulu, Hawaii. The Symposium was held in honour of the five Nobel Laureates who have contributed so extensively to the development of Applied Quantum Chemistry. K. Fukui, G. Herzberg, R. Hoffmann, W.N. Lipscomb and R.S. Mulliken. Professors Fukui, Hoffmann and Lipscomb attended and presented plenary lectures to the Symposium. Their lectures and the other invited papers and invited poster presentations brought into focus the current state of Applied Quantum Chemistry and showed the importance of the interaction between quantum theory and experiment. We are indebted to the Subdivision of Theoretical Chemistry and the Division of Physical Chemistry of the American Chemical Society, the Division of Physical Chemistry of the Chemical Institute of Canada, Energy Conversion Devices, Inc., the IBM Corporation, and the Congress for their financial support which helped to make the Symposium possible. We would like to thank Dr. Philip Payne for making some of the local arrangements, and Mrs. Betty McIntosh for her assistance in arranging the Symposium and in the preparation of these proceedings for publication.
