Download or read book Polymer Colloids written by Robert M. Fitch and published by Academic Press. This book was released on 1997-05-02 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text introduces the beginner to the field with a solid development of the fundamentals, without getting bogged down in details. It provides an insight that can only be found from the author's 40+ years of experience
Download or read book Colloidal Polymers written by Abdelhamid Elaissari and published by CRC Press. This book was released on 2003-08-06 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amidst developments in nanotechnology and successes in catalytic emulsion polymerization of olefins, polymerization in dispersed media is arousing an increasing interest from both practical and fundamental points of view. This text describes ultramodern approaches to synthesis, preparation, characterization, and functionalization of latexes, nanoparticles, and numerous additional colloidal polymer systems. In chapters contributed by leading international researchers, it communicates critical parameters for method selection, presents guidelines for controlling structural and colloid properties, presents recent results and information on polymer colloids, and describes other tools to assist in the production of desirable outcomes.
Download or read book An Introduction to Polymer Colloids written by Françoise Candau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth of interest in the subject of Polymer Colloids over the last twenty five years or so has been very large resulting now in major international conferences on an annual basis and many national ones as well. The interest stems not only from the wide range of applications of these materials but also from a curiosity as to the mechanism of formation and their growing use as model particles to investigate fundamental aspects of physics and chemistry. In July 1988 a NATO Advanced Study Institute was held in Strasbourg, France, at the Centre St. Thomas. As an educational introduction to this I nstitute a series of eight lectures was given to cover the fundamental aspects of the subject. These eight lectures have now been compiled into an Introductory Text covering, emulsion poly merization, dispersion polymerization, inverse emulsion polymerization, the morphology of copolymer latices, the colloidal properties of latices, characterization methods and rheology. It is hoped that these will serve a wide audience, undergraduates, graduate-students and research workers, both in industry and academe. The chapters all contain review material up to date at the time of publication. fhe 1988 NATO Advanced Study I nstitute was made possible by a grant from the NATO-AS I programme and the following companies: BASF, Ludwigshafen, West Germany The Dow Chemical Company, Michigan, USA Dow Chemical Rheinwerk GmbH, Rheinmunster, West Germany ICI PLC, Runcorn, England S. C. Johnson and Son Inc., Racine, USA NORSOLOR, Verneuil en Halatte, France Rhone Poulenc, Aubervilliers, France.
Download or read book Science and Technology of Polymer Colloids written by Gary W. Poehlein and published by Springer. This book was released on 2013-12-01 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science and Technology of Polymer Colloids G. W. Poehlein, R. H. Ottewill, J. W. Goodwin (editors) Polymer colloids, more commonly known as latexes, are important in the manufacture of synthetic elastomers, commodity polymers, surface coatings, adhesive and numerous specialty products. The significant growth of the commercial production of polymer latexes during the past decade has been due to a number of factors. First, water-based systems, especially paints and coatings, avoid many of the environ mental problems associated with the solvent-based systems. Second, polymer colloid products can be custom designed to meet a wide range of application requirements. Third, large scale emulsion polymeri zation proceeds smoothly and controllably with a wide range of monomers to produce stable polymer colloids of high molecular weight Polymer colloids are also important in functional scientific studies This importance arises from the spherical shape of the particles, range of attainable particle diameters and the uniformity of their size distribution, and the possibility of controlling and character izing the particle surface. Polymer colloids are useful as size standards in microscopy and in instrument calibration, and as carriers in antibody-enzyme diagnosti, tests. As suspensions of uniform spherical particles, they are idea. experimental systems to test the series of colloidal phenomena as stability and coagulation, electric kinetic or rheological proper ties, and light scattering. In recent years, polymer colloids have received attention as models for many-body molecular phenomena, including the order-disorder transitions and the mechanics of crystalline phases.
Download or read book Colloidal Polymers written by Abdelhamid Elaissari and published by CRC Press. This book was released on 2003-08-06 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amidst developments in nanotechnology and successes in catalytic emulsion polymerization of olefins, polymerization in dispersed media is arousing an increasing interest from both practical and fundamental points of view. This text describes ultramodern approaches to synthesis, preparation, characterization, and functionalization of latexes, nanopa
Download or read book Science and Technology of Polymer Colloids written by Gary W. Poehlein and published by Springer. This book was released on 2013-12-19 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science and Technology of Polymer Colloids G.W. Poehlein, R.H. Ottewill, J.W. Goodwin (editors) Polymer colloids, more commonly known as latexes, are important in the manufacture of synthetic elastomers, commodity polymers, surface coatings, adhesive and numerous specialty products. The significant growth of the commercial production of polymer latexes during the past decade has been due to a number of factors. First, water-based systems, especially paints and coatings, avoid many of the environ mental problems associated with the solvent-based systems. Second, polymer colloid products can be custom designed to meet a wide range of application requirements. Third, large scale emulsion polymeri zation proceeds smoothly and controllably with a wide range of monomers to produce stable polymer colloids of high molecular weight. Polymer colloids are also important in functional scientific studies. This importance arises from the spherical shape of the particles, range of attainable particle diameters and the uniformity of their size distribution, and the possibility of controlling and character izing the particle surface. Polymer colloids are useful as size standards in microscopy and in instrument calibration, and as carriers in antibody-enzyme diagnostic tests. As suspensions of uniform spherical particles, they are ideal experimental systems to test the series of colloidal phenomena as stability and coagulation, electric kinetic or rheological proper ties, and light scattering. In recent years, polymer colloids have received attention as models for many-body molecular phenomena, including the order-disorder transitions and the mechanics of crystalline phases.
Download or read book Colloids and Interfaces with Surfactants and Polymers written by James Goodwin and published by Wiley. This book was released on 2009-10-05 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: From blood to milk, pumice to gelatine, most scientists interact with colloids on a daily basis without any real knowledge of their nature. Building on the success of the first edition, Colloids and Interfaces with Surfactants and Polymers Second Edition is a user-friendly, non-technical introduction to colloids and interfaces. Includes: Many practical examples of colloid and interface science An enhanced section on fluorescence microscopy, a widely used technique in biological systems for the optical imaging of cellular structures A new section on phenomenology (the principle of time/temperature superposition), which enables the experimentalist to extend the frequency range of their rheological instruments New information on sedimentation and strategies for the control of sedimentation, which is critical in many dispersions of commercial importance Fresh treatments of traditional theoretical topics like the electrical double-layer, colloidal interactions, wetting behavior and light scattering, as well as more recent advances in polymer science, statistical mechanics and the use of neutrons In-depth discussions of widely used techniques with mathematics used in a straight-forward way so quantitative descriptions of colloid and interface properties can be derived Colloids and Interfaces with Surfactants and Polymers Second Edition explains all the fundamental concepts of colloids and interfaces as well as detailing some of the more advanced aspects which might be useful in specific applications. Intended for undergraduate and graduate courses in colloids and soft materials, the book is also relevant to those in the chemical, coatings, cosmetics, ceramics, food, pharmaceutical and oil industries. For Powerpoint slides of all the figures in the book, please see the Instructor Companion website at http://bcs.wiley.com/he-bcs/Books?action=index&bcsId=5121&itemId=0470518804
Download or read book Polymer Colloids written by Rodney Priestley and published by Royal Society of Chemistry. This book was released on 2019-12-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Academic and industrial research around polymer-based colloids is huge, driven both by the development of mature technologies, e.g. latexes for coatings, as well as the advancement of new materials and applications, such as building blocks for 2D/3D structures and medicine. Edited by two world-renowned leaders in polymer science and engineering, this is a fundamental text for the field. Based on a specialised course by the editors, this book provides the reader with an invaluable single source of reference. The first section describes formation, explaining basic properties of emulsions and dispersion polymerization, microfluidic approaches to produce polymer-based colloids and formation via directed self-assembly. The next section details characterisation methodologies from microscopy and small angle scattering, to surface science and simulations. The final chapters close with applications, including Pickering emulsions and molecular engineering for materials development. A comprehensive guide to polymer colloids, with contributions by leaders in their respective areas, this book is a must-have for researchers and practitioners working across polymers, soft matter and chemical and molecular engineering.
Download or read book Colloids and the Depletion Interaction written by Henk N. W. Lekkerkerker and published by Springer Nature. This book was released on with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure and Dynamics of Polymer and Colloidal Systems written by Redouane Borsali and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is based on lectures given at the NATO-Advanced Study Institute on Structure and Dynamics of Polymer and Colloid Systems held in Les Houches, France from September 14-24, 1999. The meeting arose from a perceived need to bring together scientists studying the polymer and colloid fields. Although these fields are intertwined and share many techniques (e. g. , light, neutron and x-ray scattering), it is remarkable how little the approaches and concepts used by the one field penetrate the other. For instance, the theory of spherical colloids is very highly developed and many of the concepts developed for these systems can be extended to those with non-spherical morphology, such as solutions of rigid rod polymers. In addition, mixtures of polymers and colloids, both in the bulk and at interfaces, are the basis for many industrial products. Methods are now rapidly being developed for understanding the structure and dynamics in polymer/colloid mixtures at the molecular level, but the point of view of the colloid scientist is often rather different from that of the polymer scientist. The NATO-ASI brought together polymer and colloid scientists, including many young researchers, who presented and discussed recent developments in these fields and the possibilities for cross-fertilization This volume contains articles on a wide variety of topics at the research forefront of the polymer and colloid fields by some of the world's foremost experts at a level accessible to graduate students, post-docs and researchers.
Download or read book Polymeric Stabilization of Colloidal Dispersions written by Donald H. Napper and published by . This book was released on 1983 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Mediated Phase Stability of Colloids written by Álvaro González García and published by Springer Nature. This book was released on 2019-10-28 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloid–polymer mixtures are subject of intensive research due to their wide range of applicability, for instance in coatings and food-stuffs. This thesis constitutes a fundamental investigation towards a better control over the stability of such suspensions. Through the chapters, different key parameters governing the stability of colloid–polymer mixtures are explored. How the colloid (pigment) shape and the effective polymer-colloid affinity modulate the stability of the suspension are examples of these key parameters. Despise the mostly theoretical results presented, the thesis is written in a format accessible to a broad scientific audience. Some of the equations of state presented might of direct use to experimentalists. Furthermore, new theoretical insights about colloid–polymer mixtures are put forward. These include four-phase coexistences in effective two-component, quantification of depletant partitioning at high colloidal concentrations, multiple re-entrant phase behaviour of the colloidal fluid–solid coexistence, and a condition where polymers are neither depleted nor adsorbed from/to the colloidal surface.
Download or read book Polymer Colloids written by R. Buscall and published by Springer. This book was released on 1985-01-31 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Colloids and Interfaces with Surfactants and Polymers written by James William Goodwin and published by John Wiley & Sons. This book was released on 2004-03-12 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many commercial systems are complex mixtures but in most cases the basic rules apply and surprises only occur when there is a quite specific interaction present. Hence, by using this text, the user will always have the fundamentals readily to hand.
Download or read book Colloidal Foundations of Nanoscience written by Debora Berti and published by Elsevier. This book was released on 2021-10-24 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal Foundations of Nanoscience, Second Edition explores the theory and concepts of colloid chemistry and its applications to nanoscience and nanotechnology. The book provides the essential conceptual and methodological tools to approach nano-research issues. The authors’ expertise in colloid science will contribute to the understanding of basic issues involved in research. Each chapter covers a classical subject of colloid science in simple and straightforward terms, addressing its relevance to nanoscience before introducing case studies. Sections cover colloids rheology, electrokinetics, nanoparticle tracking analysis (NTA), bio-layer interferometry, and the treatment of inter-particle interactions and colloidal stability. Gathers, in a single volume, information currently scattered across various sources Provides a straightforward introduction on theoretical concepts and in-depth case studies to help readers understand molecular mechanisms and master advanced techniques Includes examples showing the applications of classical concepts to real-world cutting-edge research Edited and written by highly respected quality scientists
Download or read book Colloids and Interfaces with Surfactants and Polymers written by James Goodwin and published by John Wiley & Sons. This book was released on 2009-08-11 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: From blood to milk, pumice to gelatine, most scientists interact with colloids on a daily basis without any real knowledge of their nature. Building on the success of the first edition, Colloids and Interfaces with Surfactants and Polymers Second Edition is a user-friendly, non-technical introduction to colloids and interfaces. Includes: Many practical examples of colloid and interface science An enhanced section on fluorescence microscopy, a widely used technique in biological systems for the optical imaging of cellular structures A new section on phenomenology (the principle of time/temperature superposition), which enables the experimentalist to extend the frequency range of their rheological instruments New information on sedimentation and strategies for the control of sedimentation, which is critical in many dispersions of commercial importance Fresh treatments of traditional theoretical topics like the electrical double-layer, colloidal interactions, wetting behavior and light scattering, as well as more recent advances in polymer science, statistical mechanics and the use of neutrons In-depth discussions of widely used techniques with mathematics used in a straight-forward way so quantitative descriptions of colloid and interface properties can be derived Colloids and Interfaces with Surfactants and Polymers Second Edition explains all the fundamental concepts of colloids and interfaces as well as detailing some of the more advanced aspects which might be useful in specific applications. Intended for undergraduate and graduate courses in colloids and soft materials, the book is also relevant to those in the chemical, coatings, cosmetics, ceramics, food, pharmaceutical and oil industries. For Powerpoint slides of all the figures in the book, please see the Instructor Companion website at http://bcs.wiley.com/he-bcs/Books?action=index&bcsId=5121&itemId=0470518804
Download or read book Functional Polymer Colloids Microparticles written by Reza Arshady and published by . This book was released on 2002 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
