Download or read book Colloidal Particle Deposition in Turbulent Flow written by and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Particles in Wall Bounded Turbulent Flows Deposition Re Suspension and Agglomeration written by Jean-Pierre Minier and published by Springer. This book was released on 2016-07-26 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents an up-to-date review of turbulent two-phase flows with the dispersed phase, with an emphasis on the dynamics in the near-wall region. New insights to the flow physics are provided by direct numerical simuation and by fine experimental techniques. Also included are models of particle dynamics in wall-bounded turbulent flows, and a description of particle surface interactions including muti-layer deposition and re-suspension.

Download or read book Particle Deposition in Turbulent Flow written by David Daniel McCoy and published by . This book was released on 1975 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Particle Deposition from Turbulent Flow in a Pipe written by Pushkar Tandon and published by . This book was released on 1997 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Particles in Gases and Liquids 3 written by K.L. Mittal and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents the proceedings of the Third Symposium on Particles in Gases and Liquids: Detection, Characterization and Control held as a part of the 22nd Annual Meeting of the Fine Particle Society in San Jose, California, July 29-August 2, 1991. This series of symposia was initiated in 1987 in light of the growing importance to eliminate particles from process gases and liquids. As pointed out in the Preface to antecedent volumes in this series that particles in process gases and liquids could cause significant yield losses in precision manufacturing and concomitantly there has been heightened interest in understanding the behavior of particles in gases and liquids and devising ways to eliminate, or at least reduce substantially, these particles. The concern about particles in gases and liquids has been there for qui.te some time in the microelectronics arena, but there are other areas also where particles are of significant concern, e.g. in operation theatres in hospitals, food and beverage industry, and pharmaceutical manufacturing. This symposium basically had the same objectives as its predecessors, but to provide an update on the R&D activity taking place in the arena of particle detection, characterization and control. The printed program comprised a total of 28 papers dealing with variegated aspects of particles in gases and liquids. There were brisk and lively discussions and the attendees offered many positive comments, which goes to show that it was a well-received and needed symposium.

Download or read book Particle Deposition from Turbulent Flows written by Angus David Leeming and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dispersion and Deposition of Heavy Particles in Turbulent Flows written by Chunyu Jin and published by . This book was released on 2012 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Particle deposition in turbulent flow a review of existing models written by A. Husain and published by . This book was released on 1982 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Particle Deposition and Aggregation written by Menachem Elimelech and published by Butterworth-Heinemann. This book was released on 1995 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.

Download or read book Particle Deposition from Turbulent Flow in a Divergent Channel written by Wai-Ting Huang and published by . This book was released on 1997 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Investigation of Particle Deposition in a Turbulent Boundary Layer with Forced Turbulence in the External Flow written by Manoj Joishi and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deposition of particles on a wall plays a significant role in fluid-solid processes such as inclusions recovery from liquid steel in ladle furnace, that controls inclusion cleanliness upstream from solidification. The aim of this work is to study the turbulent deposition and capture of particles on a wall, in a situation where turbulence in the boundary layer originates both from wall shear and from agitation in the external flow. In a ladle furnace, such an agitation would result from bubble injection. A framework for simulations at mesoscopic scale in which particles are represented as points but the turbulence is fully resolved has been developped using an in-house solver, where a Lattice Boltzmann Method (LBM) solves flow dynamics and linear isotropic forcing generates artificial turbulence. Lagrangian Particle Tracking (LPT) is used to achieve one way coupling between particle motions and turbulent flow. These numerical methods were applied to Direct Numerical simulation (DNS) of a fully developed turbulent boundary layer in which particles smaller than the Kolmogorov length scale are introduced. The deposition mechanisms in aerosol conditions have been analyzed and quantified into a statistical law for deposition velocity in terms of Stokes number, and validated against data from the literature. Such simulations have provided a better understanding of deposition and capture mechanisms, depending on the turbulent flow in a wall boundary layer and on particle physical properties. Also, preliminary simulations in hydrosol conditions that match actual ladle operation have shown that the framework developed in this work can be applied to investigate inclusion behavior in secondary steel-making although statistical analysis in this work focused on aerosols.

Download or read book Particle Deposition from Turbulent Air Flow written by G. A. Sehmel and published by . This book was released on 1969 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Particle Deposition and Aggregation written by M. Elimelech and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle Deposition and Aggregation: Measurement, Modelling and Simulation describes how particle deposition and aggregation can be measured, modeled, and simulated in a systematic manner. It brings together the necessary disciplines of colloid and surface chemistry, hydrodynamics, experimental methods, and computational methods to present a unified approach to this problem. The book is divided into four parts. Part I presents the theoretical principles governing deposition and aggregation phenomena, including a discussion of the forces that exist between particles and the hydrodynamic factors that control the movement of the particles and suspending fluid. Part II introduces methods for modeling the processes, first at a simple level (e.g. single particle-surface, single particle-single particle interactions in model flow conditions) and then describes the simulation protocols and computation tools which may be employed to describe more complex (multiple-particle interaction) systems. Part III summarizes the experimental methods of quantifying aggregating and depositing systems and concludes with a comparison of experimental results with those predicted using simple theoretical predictions. Part IV is largely based on illustrative examples to demonstrate the application of simulation and modeling methods to particle filtration, aggregation, and transport processes. This book should be useful to graduates working in process and environmental engineering research or industrial development at a postgraduate level, and to scientists who wish to extend their knowledge into more realistic process conditions in which the fluid hydrodynamics and other complicating factors must be accommodated.

Download or read book Rates of particle deposition from aqueous suspensions in turbulent flow a comparison of theory with experiment written by C. W. Turner and published by . This book was released on 1992 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Experimental Investigation of Particle Deposition and Effects of Rebound in a Turbulent Channel Flow written by Jarrett C. Gayne and published by . This book was released on 1998 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Physiological Models in Microbiology written by M. Bazin and published by CRC Press. This book was released on 2018-02-01 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physiological Models in Microbiology consists of two volumes. Volume I considers models of basic growth processes and the effects of environmental factors on microbial growth. Volume II describes models of secondary processes, in particular, microbial death, spore germination, chemotaxis, and surface growth.