Download or read book Colloidal Metal Oxide Nanoparticles written by and published by Elsevier. This book was released on 2019-10-16 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal Metal Oxide Nanoparticles: Synthesis, Characterization and Applications is a one-stop reference for anyone with an interest in the fundamentals, synthesis and applications of this interesting materials system. The book presents a simple, effective and detailed discussion on colloidal metal oxide nanoparticles. It begins with a general introduction of colloidal metal oxide nanoparticles, then delves into the most relevant synthesis pathways, stabilization procedures, and synthesis and characterization techniques. Final sections discuss promising applications, including bioimaging, biosensing, diagnostic, and energy applications—i.e., solar cells, supercapacitors and environment applications—i.e., the treatment of contaminated soil, water purification and waste remediation. Provides the most comprehensive resource on the topic, from fundamentals, to synthesis and characterization techniques Presents key applications, including biomedical, energy, electronic and environmental Discusses the most relevant techniques for synthesis, patterning and characterization

Download or read book Metallic Nanoparticles written by and published by Elsevier. This book was released on 2008-11-21 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic nanoparticles display fascinating properties that are quite different from those of individual atoms, surfaces or bulk rmaterials. They are a focus of interest for fundamental science and, because of their huge potential in nanotechnology, they are the subject of intense research effort in a range of disciplines. Applications, or potential applications, are diverse and interdisciplinary. They include, for example, use in biochemistry, in catalysis and as chemical and biological sensors, as systems for nanoelectronics and nanostructured magnetism (e.g. data storage devices), where the drive for further miniaturization provides tremendous technological challenges and, in medicine, there is interest in their potential as agents for drug delivery.The book describes the structure of metallic nanoparticles, the experimental and theoretical techniques by which this is determined, and the models employed to facilitate understanding. The various methods for the production of nanoparticles are outlined. It surveys the properties of clusters and the methods of characterisation, such as photoionization, optical spectroscopy, chemical reactivity and magnetic behaviour, and discusses element-specific information that can be extracted by synchrotron-based techniques such as EXAFS, XMCD and XMLD. The properties of clusters can vary depending on whether they are free, deposited on a surface or embedded in a matrix of another material; these issues are explored. Clusters on a surface can be formed by the diffusion and aggregation of atoms; ways of modelling these processes are described. Finally we look at nanotechnology and examine the science behind the potential of metallic nanoparticles in chemical synthesis, catalysis, the magnetic separation of biomolecules, the detection of DNA, the controlled release of molecules and their relevance to data storage.The book addresses a wide audience. There was a huge development of the subject beginning in the mid-1980s where researchers began to study the properties of free nanoparticle and models were developed to describe the observations. The newcomer is introduced to the established models and techniques of the field without the need to refer to other sources to make the material accessible. It then takes the reader through to the latest research and provides a comprehensive list of references for those who wish to pursue particular aspects in more detail. It will also be an invaluable handbook for the expert in a particular aspect of nanoscale research who wishes to acquire knowledge of other areas.The authors are specialists in different aspects of the subject with expertise in physics and chemistry, experimental techniques and computational modelling, and in interdisciplinary research. They have collaborated in research. They have also collaborated in writing this book, with the aim from the outset of making it is a coherent whole rather than a series of independent loosely connected articles. * Appeals to a wide audience* Provides an introduction to established models and techniques in the field* Comprehensive list of references

Download or read book Colloidal Synthesis of Plasmonic Nanometals written by Luis Liz-Marzán and published by CRC Press. This book was released on 2020-04-23 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noble metal nanoparticles have attracted enormous scientific and technological interest because of their unique optical properties, which are related to surface plasmon resonances. The interest in nanosized metal particles dates back to ancient societies, when metals were used in various forms as decorative elements. From the famous Lycurgus cup, made by the Romans in the 4th century AD, through thousands of stained glasses in churches and cathedrals all over medieval Europe, bright-yellow, green, or red colors have been obtained by a touch of metallic additions during glass blowing. This peculiar interaction of light with nanometals can be widely tuned through the morphology and assembly of nanoparticles, thereby expanding the range of potential applications, from energy and information storage to biomedicine, including novel diagnostic and therapeutic methods. This book compiles recent developments that clearly illustrate the state of the art in this cutting-edge research field. It comprises different review articles written by the teams of Prof. Luis Liz-Marzán, an international leader in chemical nanotechnology who has made seminal contributions to the use of colloid chemistry methods to understand and tailor the growth of metal particles at the nanoscale. Apart from synthesis, the book also describes in detail the plasmonic properties of nanomaterials and illustrates some representative applications. This book will appeal to anyone involved in nanotechnology, nanocrystal growth, nanoplasmonics, and surface-enhanced spectroscopies.

Download or read book Colloidal Metallic Nanoparticles written by Claire McVey and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Complex shaped Metal Nanoparticles written by Tapan K. Sau and published by John Wiley & Sons. This book was released on 2012-08-07 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past few years have witnessed the development of non-spherical metal nanoparticles with complex morphologies, which offer tremendous potential in materials science, chemistry, physics and medicine. Covering all important aspects and techniques of preparation and characterization of metal nanoparticles with controlled morphology and architecture, this book provides a sound overview - from the basics right up to recent developments. Renowned research scientists from all over the world present the existing knowledge in the field, covering theory and modeling, synthesis and properties of these nanomaterials. By emphasizing the underlying concepts and principles in detail, this book enables researchers to fully recognize the future research scope and the application potential of the complex-shaped metal nanoparticles, inspiring further research in this field.

Download or read book Nanobiomaterial Engineering written by Pranjal Chandra and published by Springer Nature. This book was released on 2020-01-25 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively documents the application of Nanobiomaterials in the field of bio-medicine and diagnostics technologies by involving classical concepts/examples. Nanobiotechnology is an emerging area which encompasses all the facets of research of nano and biomaterials with their interaction with biological systems. The book briefly summarizes the various types of Nanomaterial’s, and highlights the recent developments in the synthesis of the nanomaterials for the diagnostic and therapeutic biomedical applications. It skilfully reviews the utilization of the nanomaterials alone or in combination with other bio-molecules as a contrast enhancer in in-vivo imaging, Nano-Theranostics, drug delivery, and sensing transducer matrix. It also discusses the current research on designing of the new Nanobiomaterials and their implementation in numerous fields including bio-medicine and diagnostics. Finally, it summarizes the future prospects and the commercial viability of Nanobiomaterials in the human health care.​

Download or read book Polymer protected Colloidal Metal Nanoparticles written by Andrea Berta Rosa Mayer and published by . This book was released on 1996 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Nanocrystals written by Kallum M. Koczkur and published by American Chemical Society. This book was released on 2020-07-31 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our society depends heavily on metals. They are ubiquitous construction materials, critical interconnects in integrated circuits, common coinage materials, and more. Excitingly, new uses for metals are emerging with the advent of nanoscience, as metal crystals with nanoscale dimensions can display new and tunable properties. The optical and photothermal properties of metal nanocrystals have led to cancer diagnosis and treatment platforms now in clinical trials, while, at the same time, the ability to tune the surface features of metal nanocrystals is giving rise to designer catalysts that enable more sustainable use of precious resources. These are just two examples of how metal nanocrystals are addressing important social needs.

Download or read book Reducing Agents in Colloidal Nanoparticle Synthesis written by Stefanos Mourdikoudis and published by Royal Society of Chemistry. This book was released on 2021-05-17 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will highlight the role of reducing agents in the chemical synthesis of nanoparticle systems.

Download or read book Noble Metal Nanoparticles written by Ignác Capek and published by Springer. This book was released on 2017-07-20 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the reader the chemistry of reaction approaches by which noble metal nanoparticles are synthesized, including synthetic approaches using the Brust–Schiffrin method , a high-temperature solution-phase synthesis, polymer and biological entities, weak and strong reducing and capping agents, the low and high temperatures, various additives and various novel approaches such as plasma, ionic liquids, UV light and gamma rays and others. This book starts with a brief overview of foundation work concerned with the chapter topics such as nanomaterials, nanoscience, surface-capping molecules, traditional and nontraditional reduction agents, In addition, chemical and physical properties of noble metal nanoparticles with different structures and elements such as monolayered clusters, nanorods, and bimetallic nanoparticles are described comprehensively. The aim is to summarize the fundamentals and mechanistic approaches in the preparation and characterization of metal colloidal nanoparticles and dispersions. In this way the reader is provided with a systematic and coherent picture of the interesting field of nanoscience based on noble metal colloidal nanoparticles. Intended as a wide-ranging overview, the book is a resource for novices in the field as well as for specialists, particularly those scientists working in the area of nanoparticle synthesis. Nanoscience and nanotechnology are discussed from the chemist’s point of view. Therefore, this volume describes in detail the terms, definitions, theories, experiments, and techniques dealing with the synthesis of noble metal nanoparticles. The material presented here is essential reading for research chemists, technologists, and engineers in the fields of specialty nanomaterials and metal industries, and also is highly valuable for researchers in university, institutional, and governmental laboratories, especially for those at advanced stages of their careers.

Download or read book Nanoscience written by Victor M. Starov and published by CRC Press. This book was released on 2010-06-15 with total page 1257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together a prominent roster of 42 leading investigators and their teams, this volume details the wide range of theoretical and experimental knowledge that can be successfully applied for investigating nanosystems. The book provides researchers with a full examination of nano-disperse colloids, homogeneous and heterogeneous nano-structured materials (and their properties), and shelf-organization at the nano-scale. It explores non-linear lectrokinetic phenomena in nano-sized dispersions and nano-sized biological systems. It discusses application aspects of technological processes in great detail, offering scientists and engineers across all fields authoritative commentary on colloid and interface science operating at the nanoscale.

Download or read book Colloidal Nanoparticles for Heterogeneous Catalysis written by Priscila Destro and published by Springer. This book was released on 2018-12-13 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the formation of colloidal gold–copper (AuCu) alloy nanoparticles and evaluate their application in heterogeneous catalysis. Metal alloys are extremely versatile materials that have been used since the Antiquity to improve the properties of commonly used metals, therefore the understanding of their properties has fostered the applications in areas such as photonics, sensors, clinical diagnostics, and especially in heterogeneous catalysis, which allows catalyst active sites to be modulated. In this book, readers will appreciate the fundamental aspects involved in the synthesis of AuCu nanoalloys, including real-time information about their atomic organization, electronic properties, as well a deeper understand about the behavior of AuCu supported nanoalloys under real catalytic conditions, providing interesting insights about the effect of the support on the nanoalloy stability. The results presented here open new horizons for using metal alloys in catalysis and also other areas where the metal–support interface may play a crucial role.

Download or read book Colloidal Metallic and Gaseous Ionic Nanoparticles written by Temershah Ahmadi and published by . This book was released on 1996 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Nanoparticles and Clusters written by Francis Leonard Deepak and published by Springer. This book was released on 2017-11-17 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​This book covers the continually expanding field of metal nanoparticles and clusters, in particular their size-dependent properties and quantum phenomena. The approaches to the organization of atoms that form clusters and nanoparticles have been advancing rapidly in recent times. These advancements are described through a combination of experimental and computational approaches and are covered in detail by the authors. Recent highlights of the various emerging properties and applications ranging from plasmonics to catalysis are showcased.

Download or read book Metal Nanoparticles written by Daniel L. Fedlheim and published by CRC Press. This book was released on 2001-10-26 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: A state-of-the-art reference, Metal Nanoparticles offers the latest research on the synthesis, characterization, and applications of nanoparticles. Following an introduction of structural, optical, electronic, and electrochemical properties of nanoparticles, the book elaborates on nanoclusters, hyper-Raleigh scattering, nanoarrays, and several applications including single electron devices, chemical sensors, biomolecule sensors, and DNA detection. The text emphasizes how size, shape, and surface chemistry affect particle performance throughout. Topics include synthesis and formation of nanoclusters, nanosphere lithography, modeling of nanoparticle optical properties, and biomolecule sensors.

Download or read book Metal Nanoparticles for Catalysis written by Franklin (Feng) Tao and published by Royal Society of Chemistry. This book was released on 2014-06-30 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the synthesis and applications of different nanocatalysts.

Download or read book Metal Nanoparticle Synthesis by Photochemical Reduction with a High intensity Focused Laser Beam written by Victoria Kathryn Meader and published by . This book was released on 2019 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal, metallic nanoparticles have myriad applications, but they are most ideal when they are monodisperse, and demonstrate maximum catalytic utility when they are small (