Download or read book Collaborative Product Assembly Design and Assembly Planning written by Cong Lu and published by . This book was released on 2011 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative product assembly design and assembly planning presents several newly-developed methodologies and applications for collaborative assembly design and assembly planning, two important steps during the product development life cycle. These benefits include effective and rapid assembly design and assembly planning, thereby reducing the development cost and helping manufacturers enhance profit. With increased development in computer technologies and the Internet, the traditional assembly design and assembly planning have evolved around collaborative assembly design and assembly planning to speed up the product development process. Research in this area has attracted much attention in the past decade. Based on research work in the past few years, this book will present several newly-developed methodologies and applications for collaborative assembly design and assembly planning to improve the efficiency of product development in a collaborative design environment. Provides practical and realistic solutions to engineering problemsMethodologies introduced will lead to future commercialisation of systemsDetailed step-by-step case study examples will illustrate the methodologies and be discussed thoroughly.

Download or read book Collaborative Product Assembly Design and Assembly Planning written by C. Lu and published by Elsevier. This book was released on 2011-07-12 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative product assembly design and assembly planning presents several newly-developed methodologies and applications for collaborative assembly design and assembly planning, two important steps during the product development life cycle. These benefits include effective and rapid assembly design and assembly planning, thereby reducing the development cost and helping manufacturers enhance profit. With increased development in computer technologies and the Internet, the traditional assembly design and assembly planning have evolved around collaborative assembly design and assembly planning to speed up the product development process. Research in this area has attracted much attention in the past decade. Based on research work in the past few years, this book will present several newly-developed methodologies and applications for collaborative assembly design and assembly planning to improve the efficiency of product development in a collaborative design environment. Provides practical and realistic solutions to engineering problems Methodologies introduced will lead to future commercialisation of systems Detailed step-by-step case study examples will illustrate the methodologies and be discussed thoroughly

Download or read book Collaborative Design and Planning for Digital Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2009-01-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative design has attracted much attention in the research community in recent years. With increasingly decentralized manufacturing systems and processes, more collaborative approaches and systems are needed to support distributed manufacturing operations. "Collaborative Design and Planning for Digital Manufacturing" presents a focused collection of quality chapters on the state-of-the-art research efforts in the area of collaborative design and planning, as well as their practical applications towards digital manufacturing. "Collaborative Design and Planning for Digital Manufacturing" provides both a broad-based review of the key areas of research in digital manufacturing, and an in-depth treatment of particular methodologies and systems, from collaborative design to distributed planning, monitoring and control. Recent development and innovations in this area provide a pool of focused research efforts, relevant to a wide readership from academic researchers to practicing engineers.

Download or read book Collaborative Product Design and Manufacturing Methodologies and Applications written by Wei Dong Li and published by Springer Science & Business Media. This book was released on 2007-06-02 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative Product Design and Manufacturing Methodologies and Applications introduces a wide spectrum of collaborative engineering issues in design and manufacturing. It offers state-of-the-art chapters written by international experts from academia and industry, and reflects the most up-to-date R & D work and applications, especially those from the last three to five years. The book will serve as an essential reference for academics, upper-level undergraduate and graduate students and practicing professionals.

Download or read book Product Development and Design for Manufacturing written by John Priest and published by CRC Press. This book was released on 2012-04-16 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Outlines best practices and demonstrates how to desgin in quality for successful development of hardware and software products. Offers systematic applications failored to particular market environments. Discusses Internet issues, electronic commerce, and supply chain."

Download or read book Design for Manufacturing and Assembly written by O. Molloy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to compete in the current commercial environment companies must produce greater product variety, at lower cost, all within a reduced product life cycle. To achieve this, a concurrent engineering philosophy is often adopted. In many cases the main realization of this is Design for Manufacture and Assembly (DFM/A). There is a need for in-depth study of the architectures for DFM/A systems in order that the latest software and knowledge-based techniques may be used to deliver the DFM/A systems of tomorrow. This architecture must be based upon complete understanding of the issues involved in integrating the design and manufacturing domains. This book provides a comprehensive view of the capabilities of advanced DFM/A systems based on a common architecture.

Download or read book Computer aided Assembly Planning written by Alain Delchambre and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The assembly sector is one of the least automated in the manufacturing industry. Automation is essential if industrial companies are to be competitive in the future. In assembly, an integrated and flexible approach is needed because 75% of the applications are produced in small and medium batches. The methodologies developed in this book deal with the integration of the assembly process from the initial design of the product to its production. In such an integrated system, assembly planning is one of the most important features. A well-chosen assembly plan will reduce both the number of tool changes and the fixtures within the assembly cell. It will prevent the handling of unstable subassemblies, simplify the design of the robot grippers and reduce production costs. An automatic generator of assembly sequences can be an efficient aid to the designer. Whenever he or she modifies features of the product, the influence of these modifications can immediately be checked on the sequences. For small batch production, the automatic generation of assembly sequences is faster, more reliable and more cost-effective than manual generation. By using this latter method interesting sequences could be missed because of the combinatorial explosion of solutions. The main subjects treated in this book are as follows. 1. Presentation and classification of existing systems of automatic generation of assembly sequences. Automatic assembly planning is, indeed, a very recent research area and, in my experience, no systematic study has been carried out up to now.

Download or read book Mechatronics and Applied Mechanics written by Jing Guo and published by Trans Tech Publications Ltd. This book was released on 2012-02-27 with total page 1780 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of selected papers from the 2011 International Conference on Mechatronics and Applied Mechanics, ICMAM2011, held in Hong Kong discloses the latest developments in the field of Manufacturing Technology and Processing, Mechatronics and Automation, Mechatronics and Embedded System Applications and other related fields. Volume is indexed by Thomson Reuters CPCI-S (WoS). It covers, in particular, the topics of Mechatronics and Automation, Mechanical Manufacturing Systems, Signal Processing, Manufacturing Technology and Processing plus Materials Science and Technology.

Download or read book Assembly Design and Planning Methodologies and Applications written by Abby Barnes and published by Clanrye International. This book was released on 2023-09-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assembly design, formally known as design-for-assembly (DFA), refers to a set of best practices for manufacturing a product aimed at making it easier to assemble and manufacture a product, reducing the part count, minimizing the stages of assembly process, and mistake-proofing the assembly process as far as possible. The most important application of assembly design is product manufacturing. Assembly design techniques can be applied to products assembled manually or automatically. Assembly design makes use of one or the other type of assembly line for manufacturing products. In an assembly line, different machines and workers are arranged in a pre-defined sequence. Each location on the assembly line where a worker processes a product using the given machine is called a workstation. The products or the semi-finished products move from one workstation to another while they are being built. The use of assembly lines help in reducing the ergonomic strain and high labor costs. Automation of assembly lines is commonly done using highly rigid kinematic structures in special machines to ensure accuracy. There are two basic assembly design methodologies namely bottom-up design and top-down design. This book outlines the methodologies and applications of assembly design along with its planning aspects. It will help new researchers by foregrounding their knowledge in this area of study.

Download or read book Advances in Manufacturing Technology XVI NCMR 2002 written by Kai Cheng and published by John Wiley & Sons. This book was released on 2002-11-22 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Manufacturing Technology XVI provides a comprehensive collection of papers exploring the very latest developments in the field of manufacturing engineering and managment and incorporates the most up-to-date techniques. TOPICS COVERED INCLUDE: Business strategies process reengineering CAD/CAM and concurrent engineering E-manufacturing and virtual reality Engineering modelling and simulations Total quality management and metrology Intelligent systems. robotics and automation Lean and agiel manufacturing Machining process and tooling Operations management Process control and condition monitoring Covering all aspects of manufacturing engineering, systems, and management this volume will be of great interest to those wanting to keep abreast pf current research and those involved in the planning stages in this area of engineering.

Download or read book Intelligent Knowledge Based Systems written by Cornelius T. Leondes and published by Springer Science & Business Media. This book was released on 2010-04-28 with total page 2041 pages. Available in PDF, EPUB and Kindle. Book excerpt: This five-volume set clearly manifests the great significance of these key technologies for the new economies of the new millennium. The discussions provide a wealth of practical ideas intended to foster innovation in thought and, consequently, in the further development of technology. Together, they comprise a significant and uniquely comprehensive reference source for research workers, practitioners, computer scientists, academics, students, and others on the international scene for years to come.

Download or read book Design Computing and Cognition 14 written by John S. Gero and published by Springer. This book was released on 2015-04-16 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the state-of-the-art of research and development in design computing and design cognition. It features more than 35 papers that were presented at the Sixth International Conference on Design Computing and Cognition, DCC’14, held at University College, London, UK. Inside, readers will find the work of expert researchers and practitioners that explores both advances in theory and application as well as demonstrates the depth and breadth of design computing and design cognition. This interdisciplinary coverage, which includes material from international research groups, examines design synthesis, design cognition, design creativity, design processes, design theory, design grammars, design support and design ideation. Overall, the papers provide a bridge between design computing and design cognition. The confluence of these two fields continues to build the foundation for further advances and leads to an increased understanding of design as an activity whose influence continues to spread. As a result, the book will be of particular interest to researchers, developers and users of advanced computation in design and those who need to gain a better understanding of designing that can be obtained through empirical studies.

Download or read book Computer Aided Mechanical Assembly Planning written by Luis S. Homem de Mello and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some twenty years have elapsed since the first attempts at planning were made by researchers in artificial intelligence. These early programs concentrated on the development of plans for the solution of puzzles or toy problems, like the rearrangement of stacks of blocks. These early programs provided the foundation for the work described in this book, the automatic generation of plans for industrial assembly. As one reads about the complex and sophisticated planners in the current gen eration, it is important to keep in mind that they are addressing real-world problems. Although these systems may become the "toy" systems of tomor row, they are providing a solid foundation for future, more general and more advanced planning tools. As demonstrated by the papers in this book, the field of computer-aided mechanical assembly planning is maturing. It now may include: • geometric descriptions of parts extracted from or compatible with CAD programs; • constraints related to part interference and the use of tools; • fixtures and jigs required for the assembly; • the nature of connectors, matings and other relations between parts; • number of turnovers required during the assembly; • handling and gripping requirements for various parts; • automatic identification of subassemblies. This is not an exhaustive list, but it serves to illustrate the complexity of some of the issues which are discussed in this book. Such issues must be considered in the design of the modern planners, as they produce desirable assembly sequences and precedence relations for assembly.

Download or read book Product Lifecycle Management Towards Knowledge Rich Enterprises written by Louis Rivest and published by Springer. This book was released on 2012-12-22 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-proceedings of the 9th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2012, held in Montreal, Canada, in July 2012. The 58 full papers presented were carefully reviewed and selected from numerous submissions. They cover a large range of topics such as collaboration in PLM, tools and methodologies for PLM, modeling for PLM, and PLM implementation issues.

Download or read book Recent Trends in Product Design and Intelligent Manufacturing Systems written by B.B.V.L. Deepak and published by Springer Nature. This book was released on 2022-10-05 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the 3rd Innovative Product Design and Intelligent Manufacturing System (IPDIMS 2020), held at National Institute of Technology (NIT) Rourkela, 30–31 December 2021. This volume covers the latest research topics in design and manufacturing fields of engineering. Some of the themes covered include Industry 4.0, smart manufacturing, advanced robotics and CAD/CAM/CIM. This book will be useful for students, researchers and professionals in the disciplines of mechatronics, mechanical, manufacturing, production and industrial engineering, especially those working on improvements in manufacturing technologies and development of resilient infrastructure in industry.

Download or read book Virtual Augmented and Mixed Reality Applications in Education Aviation and Industry written by Jessie Y. C. Chen and published by Springer Nature. This book was released on 2022-05-28 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set LNCS 13317 and 13318 constitutes the thoroughly refereed proceedings of the 14th International Conference on Virtual, Augmented and Mixed Reality, VAMR 2022, held virtually as part of the 24rd HCI International Conference, HCII 2022, in June/July 2022.The total of 1276 papers and 241 posters included in the 39 HCII 2021 proceedings volumes was carefully reviewed and selected from 5222 submissions. The 56 papers included in this 2-volume set were organized in topical sections as follows: Developing VAMR Environments; Evaluating VAMR environments; Gesture-based, haptic and multimodal interaction in VAMR; Social, emotional, psychological and persuasive aspects in VAMR; VAMR in learning, education and culture; VAMR in aviation; Industrial applications of VAMR. The first volume focuses on topics related to developing and evaluating VAMR environments, gesture-based, haptic and multimodal interaction in VAMR, as well as social, emotional, psychological and persuasive aspects in VAMR, while the second focusses on topics related to VAMR in learning, education and culture, VAMR in aviation, and industrial applications of VAMR.

Download or read book Advanced Human Robot Collaboration in Manufacturing written by Lihui Wang and published by Springer Nature. This book was released on 2021-06-10 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art research, challenges and solutions in the area of human–robot collaboration (HRC) in manufacturing. It enables readers to better understand the dynamic behaviour of manufacturing processes, and gives more insight into on-demand adaptive control techniques for industrial robots. With increasing complexity and dynamism in today’s manufacturing practice, more precise, robust and practical approaches are needed to support real-time shop-floor operations. This book presents a collection of recent developments and innovations in this area, relying on a wide range of research efforts. The book is divided into five parts. The first part presents a broad-based review of the key areas of HRC, establishing a common ground of understanding in key aspects. Subsequent chapters focus on selected areas of HRC subject to intense recent interest. The second part discusses human safety within HRC. The third, fourth and fifth parts provide in-depth views of relevant methodologies and algorithms. Discussing dynamic planning and monitoring, adaptive control and multi-modal decision making, the latter parts facilitate a better understanding of HRC in real situations. The balance between scope and depth, and theory and applications, means this book appeals to a wide readership, including academic researchers, graduate students, practicing engineers, and those within a variety of roles in manufacturing sectors.