Download or read book Collaborative Design and Planning for Digital Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2009-01-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative design has attracted much attention in the research community in recent years. With increasingly decentralized manufacturing systems and processes, more collaborative approaches and systems are needed to support distributed manufacturing operations. "Collaborative Design and Planning for Digital Manufacturing" presents a focused collection of quality chapters on the state-of-the-art research efforts in the area of collaborative design and planning, as well as their practical applications towards digital manufacturing. "Collaborative Design and Planning for Digital Manufacturing" provides both a broad-based review of the key areas of research in digital manufacturing, and an in-depth treatment of particular methodologies and systems, from collaborative design to distributed planning, monitoring and control. Recent development and innovations in this area provide a pool of focused research efforts, relevant to a wide readership from academic researchers to practicing engineers.

Download or read book Collaborative Design and Planning for Digital Manufacturing written by Lihui Wang and published by Springer. This book was released on 2009-08-29 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative design has attracted much attention in the research community in recent years. With increasingly decentralized manufacturing systems and processes, more collaborative approaches and systems are needed to support distributed manufacturing operations. "Collaborative Design and Planning for Digital Manufacturing" presents a focused collection of quality chapters on the state-of-the-art research efforts in the area of collaborative design and planning, as well as their practical applications towards digital manufacturing. "Collaborative Design and Planning for Digital Manufacturing" provides both a broad-based review of the key areas of research in digital manufacturing, and an in-depth treatment of particular methodologies and systems, from collaborative design to distributed planning, monitoring and control. Recent development and innovations in this area provide a pool of focused research efforts, relevant to a wide readership from academic researchers to practicing engineers.

Download or read book Collaborative Product Design and Manufacturing Methodologies and Applications written by Wei Dong Li and published by Springer Science & Business Media. This book was released on 2007-06-02 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative Product Design and Manufacturing Methodologies and Applications introduces a wide spectrum of collaborative engineering issues in design and manufacturing. It offers state-of-the-art chapters written by international experts from academia and industry, and reflects the most up-to-date R & D work and applications, especially those from the last three to five years. The book will serve as an essential reference for academics, upper-level undergraduate and graduate students and practicing professionals.

Download or read book Virtual Augmented and Mixed Reality written by Stephanie Lackey and published by Springer. This book was released on 2016-07-04 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the refereed proceedings of the 8th International Conference on HCI in Virtual, Augmented and Mixed Reality, VAMR 2016, held as part of the 18th International Conference on Human-Computer Interaction, HCII 2016, which took place in Toronto, Canada, in July 2016. HCII 2016 received a total of 4354 submissions, of which 1287 papers were accepted for publication after a careful reviewing process. The 70 papers presented in this volume are organized in topical sections named: Usability, User Experience and Design in VAMR, Perception, Cognition, Psychology and Behaviour in VAMR, Multimodal Interaction in VAMR, Novel Devices and Technologies in VAMR, VAMR Applications in Aviation, Space and the Military, Medicine, Health and Well-Being Applications of VAMR, VAMR in Industry, Design and Engineering, Novel Virtual Environments.

Download or read book Operations Logistics and Supply Chain Management written by Henk Zijm and published by Springer. This book was released on 2018-08-29 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of important trends and developments in logistics and supply chain research, making them available to practitioners, while also serving as a point of reference for academicians. Operations and logistics are cornerstones of modern supply chains that in turn are essential for global business and economics. The composition, character and importance of supply chains and networks are rapidly changing, due to technological innovations such as Information and Communication Technologies, Sensors and Robotics, Internet of Things, and Additive Manufacturing, to name a few (often referred to as Industry 4.0). Societal developments such as environmental consciousness, urbanization or the optimal use of scarce resources are also impacting how supply chain networks are configured and operated. As a result, future supply chains will not just be assessed in terms of cost-effectiveness and speed, but also the need to satisfy agility, resilience and sustainability requirements. To face these challenges, an understanding of the basic as well as more advanced concepts and recent innovations is essential in building competitive and sustainable supply chains and, as part of that, logistics and operations. These span multiple disciplines and geographies, making them interdisciplinary and international. Therefore, this book contains contributions and views from a variety of experts from multiple countries, and combines management, engineering as well as basic information technology and social concepts. In particular, it aims to: provide a comprehensive guide for all relevant and major logistics, operations, and supply chain management topics in teaching and business practice address three levels of expertise, i.e., concepts and principles at a basic (undergraduate, BS) level, more advanced topics at a graduate level (MS), and finally recent (state-of-the-art) developments at a research level. In particular the latter serve to present a window on current and future (potential) logistics innovations in the different thematic fields for both researchers and top business practitioners integrate a textbook approach with matching case studies for effective teaching and learning discuss multiple international perspectives in order to represent adequately the true global nature of operations, logistics and supply chains.

Download or read book Semantic Modeling and Interoperability in Product and Process Engineering written by Yongsheng Ma and published by Springer Science & Business Media. This book was released on 2013-06-06 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past decade, feature-based design and manufacturing has gained some momentum in various engineering domains to represent and reuse semantic patterns with effective applicability. However, the actual scope of feature application is still very limited. Semantic Modeling and Interoperability in Product and Process Engineering provides a systematic solution for the challenging engineering informatics field aiming at the enhancement of sustainable knowledge representation, implementation and reuse in an open and yet practically manageable scale. This semantic modeling technology supports uniform, multi-facet and multi-level collaborative system engineering with heterogeneous computer-aided tools, such as CADCAM, CAE, and ERP. This presented unified feature model can be applied to product and process representation, development, implementation and management. Practical case studies and test samples are provided to illustrate applications which can be implemented by the readers in real-world scenarios. By expanding on well-known feature-based design and manufacturing approach, Semantic Modeling and Interoperability in Product and Process Engineering provides a valuable reference for researchers, practitioners and students from both academia and engineering field.

Download or read book Advanced Design and Manufacturing Based on STEP written by Xun Xu and published by Springer Science & Business Media. This book was released on 2009-09-29 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and manufacturing is the essential element in any product development lifecycle. Industry vendors and users have been seeking a common language to be used for the entire product development lifecycle that can describe design, manufacturing and other data pertaining to the product. Many solutions were proposed, the most successful being the Stadndard for Exchange of Product model (STEP). STEP provides a mechanism that is capable of describing product data, independent from any particular system. The nature of this description makes it suitable not only for neutral file exchange, but also as a basis for implementing, sharing and archiving product databases. ISO 10303-AP203 is the first and perhaps the most successful AP developed to exchange design data between different CAD systems. Going from geometric data (as in AP203) to features (as in AP224) represents an important step towards having the right type of data in a STEP-based CAD/CAM system. Of particular significance is the publication of STEP-NC, as an extension of STEP to NC, utilising feature-based concepts for CNC machining purposes. The aim of this book is to provide a snapshot of the recent research outcomes and implementation cases in the field of design and manufacturing where STEP is used as the primary data representation protocol. The 20 chapters are contributed by authors from most of the top research teams in the world. These research teams are based in national research institutes, industries as well as universities.

Download or read book Proceedings of the 4th International Conference on the Industry 4 0 Model for Advanced Manufacturing written by Laszlo Monostori and published by Springer. This book was released on 2019-04-30 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 4th International Conference on the Industry 4.0 Model for Advanced Manufacturing (AMP 2019), held in Belgrade, Serbia, on 3–6 June 2019. The event marks the latest in a series of high-level conferences that bring together experts from academia and industry to exchange knowledge, ideas, experiences, research findings, and information in the field of manufacturing. The book addresses a wide range of topics, including: design of smart and intelligent products, developments in CAD/CAM technologies, rapid prototyping and reverse engineering, multistage manufacturing processes, manufacturing automation in the Industry 4.0 model, cloud-based products, and cyber-physical and reconfigurable manufacturing systems. By providing updates on key issues and highlighting recent advances in manufacturing engineering and technologies, the book supports the transfer of vital knowledge to the next generation of academics and practitioners. Further, it will appeal to anyone working or conducting research in this rapidly evolving field.

Download or read book Digital Product and Process Development Systems written by George L. Kovacs and published by Springer. This book was released on 2013-10-07 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the IFIP TC 5 International Conference on Digital Product and Process Development Systems, NEW PROLAMAT 2013, held in Dresden, Germany, in October 2013. The conference succeeds the International Conference on Programming Languages for Machine Tools, PROLAMAT 2006, held in Shanghai, China in 2006. In order to demonstrate the new orientation toward IT innovations, the acronym PROLAMAT has been changed into NEW PROLAMAT and is now interpreted as Project Research on Leading-Edge Applications and Methods for Applied Technology. The 42 revised papers were carefully reviewed and selected for inclusion in the volume. They have been organized in the following topical sections: digital product and process development; additive manufacturing; quality management; standardization and knowledge management developments; and simulation of procedures and processes.

Download or read book Design and Modeling of Mechanical Systems IV written by Nizar Aifaoui and published by Springer Nature. This book was released on 2020-02-26 with total page 961 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of original peer-reviewed contributions presented at the 8th International Congress on Design and Modeling of Mechanical Systems (CMSM’2019), held in Hammamet, Tunisia, from the 18th to the 20th of March 2019. It reports on research, innovative industrial applications and case studies concerning mechanical systems and related to modeling and analysis of materials and structures, multiphysics methods, nonlinear dynamics, fluid structure interaction and vibroacoustics, design and manufacturing engineering. Continuing on the tradition of the previous editions, these proceedings offers a broad overview of the state-of-the art in the field and a useful resource for academic and industry specialists active in the field of design and modeling of mechanical systems. CMSM’2019 was jointly organized by two leading Tunisian research laboratories: the Mechanical Engineering Laboratory of the National Engineering School of Monastir, University of Monastir and the Mechanical, Modeling and Manufacturing Laboratory of the National Engineering School of Sfax, University of Sfax.

Download or read book Rapid One of a kind Product Development written by Shane (Shengquan) Xie and published by Springer Science & Business Media. This book was released on 2011-02-18 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid One-of-a-kind Product Development discusses research in the development of new enabling technologies for small and medium companies. Scientific advancements presented include a novel product data modelling scheme to model product design, manufacturability and knowledge under a common data object; customised product development in a distributed environment; and new adaptive scheduling methods for the optimal production of a wide variety of customised products, taking into consideration all of the possible changes from customers and the uncertainties in manufacturing. The book also includes research towards a computer aided customer interface, which allows customer requirements and changes to be processed and integrated with technical designs in real time; adaptive and concurrent CAD methods and algorithms; and product modelling and system integration technologies. The reader will learn how to: • translate customer requirements to technical attributes; • develop new and innovative products to meet customer requirements and expectations; • evaluate and optimise a project design; • design production systems and use them efficiently; and • manage a variety of customised products. Rapid One-of-a-kind Product Development demonstrates how to develop new methods, tools and algorithms to address the problems in a mass customisation environment. It is a valuable source of information for researchers and engineers in the fields of design and manufacturing.

Download or read book Virtual and Augmented Reality Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2018-03-02 with total page 1845 pages. Available in PDF, EPUB and Kindle. Book excerpt: Virtual and augmented reality is the next frontier of technological innovation. As technology exponentially evolves, so do the ways in which humans interact and depend upon it. Virtual and Augmented Reality: Concepts, Methodologies, Tools, and Applications is a comprehensive reference source for the latest scholarly material on the trends, techniques, and uses of virtual and augmented reality in various fields, and examines the benefits and challenges of these developments. Highlighting a range of pertinent topics, such as human-computer interaction, digital self-identity, and virtual reconstruction, this multi-volume book is ideally designed for researchers, academics, professionals, theorists, students, and practitioners interested in emerging technology applications across the digital plane.

Download or read book Collaborative Product Assembly Design and Assembly Planning written by C. Lu and published by Woodhead Publishing. This book was released on 2011-07-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative product assembly design and assembly planning presents several newly-developed methodologies and applications for collaborative assembly design and assembly planning, two important steps during the product development life cycle. These benefits include effective and rapid assembly design and assembly planning, thereby reducing the development cost and helping manufacturers enhance profit. With increased development in computer technologies and the Internet, the traditional assembly design and assembly planning have evolved around collaborative assembly design and assembly planning to speed up the product development process. Research in this area has attracted much attention in the past decade. Based on research work in the past few years, this book will present several newly-developed methodologies and applications for collaborative assembly design and assembly planning to improve the efficiency of product development in a collaborative design environment.

Download or read book Robotics Automation and Control in Industrial and Service Settings written by Luo, Zongwei and published by IGI Global. This book was released on 2015-09-10 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: ###############################################################################################################################################################################################################################################################

Download or read book A Perspective on Artificial Intelligence in Manufacturing written by George Chryssolouris and published by Springer Nature. This book was released on 2023-01-01 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates the rapid developments of Artificial intelligence (AI) as well as their capability to address efficiently and in a cost-effective manner issues of the manufacturing field. A number of manufacturing applications of AI related to manufacturing processes, robots, automation and manufacturing systems design and control, are presented and discussed. The book includes an outlook on a way forward to intelligent manufacturing, through AI. The real benefit from AI in manufacturing will not only derive through the automation of tasks but also through the provision of new levels of autonomy that will make entirely new applications possible and introduce new business processes in manufacturing.

Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2011-09-29 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2011) is “Enabling Manufacturing Competitiveness and Economic Sustainability”. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems’ economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented.

Download or read book Proceedings of the 6th CIRP Sponsored International Conference on Digital Enterprise Technology written by George Q. Huang and published by Springer Science & Business Media. This book was released on 2009-12-12 with total page 1754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings volume contains articles presented at the CIRP-Sponsored Inter- tional Conference on Digital Enterprise Technology (DET2009) that takes place December 14–16, 2009 in Hong Kong. This is the 6th DET conference in the series and the first to be held in Asia. Professor Paul Maropoulos initiated, hosted and chaired the 1st International DET Conference held in 2002 at the University of D- ham. Since this inaugural first DET conference, DET conference series has been s- cessfully held in 2004 at Seattle, Washington USA, in 2006 at Setubal Portugal, in 2007 at Bath England, and in 2008 at Nantes France. The DET2009 conference continues to bring together International expertise from the academic and industrial fields, pushing forward the boundaries of research kno- edge and best practice in digital enterprise technology for design and manufacturing, and logistics and supply chain management. Over 120 papers from over 10 countries have been accepted for presentation at DET2009 and inclusion in this Proceedings volume after stringent refereeing process. On behalf of the organizing and program committees, the Editors are grateful to the many people who have made DET2009 possible: to the authors and presenters, es- cially the keynote speakers, to those who have diligently reviewed submissions, to members of International Scientific Committee, Organizing Committee and Advisory Committes, and to colleagues for their hard work in sorting out all the arrangements. We would also like to extend our gratitude to DET2009 sponsors, co-organizers, and supporting organizations.