Download or read book Cogeneration Fuel Cell Sorption Air Conditioning Systems written by I. Pilatowsky and published by Springer Science & Business Media. This book was released on 2011-01-28 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although conventional cogeneration systems have been used successfully in the last two decades, most of them have been large units using mainly hydrocarbon fuels that are becoming increasingly expensive. New cogeneration systems based on fuel cells and sorption air conditioning systems promise to be an energy-saving alternative for situations when cooling, heating and power are needed at low and medium capacities. Cogeneration Fuel Cell-Sorption Air Conditioning Systems examines the thermodynamic principles of fuel cell performance and sorption air conditioning systems, and gives relevant information about the state of the art of these technologies. It also provides the reader with the theoretical bases and knowledge needed to understand the operation of these new cogeneration systems, as well as discussing the design basis and economical evaluation. Topics covered include: • selected fuel cells for cogeneration CHP processes; • state-of-the-art sorption refrigeration systems; • potential applications in demonstration projects; and • profitability assessment of the cogeneration system. Air conditioning and fuel cell engineers; postgraduates and researchers in energy fields; and designers of cooling, heating and power cogeneration systems will find Cogeneration Fuel Cell-Sorption Air Conditioning Systems a useful and informative reference.
Download or read book Micro Cogeneration written by Martin Pehnt and published by Springer. This book was released on 2010-02-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of micro CHP – the simultaneous production of heat and power in a single building based on small energy conversion units such as Stirling and reciprocating engines or fuel cells – is of increasing political and public interest. This book introduces into micro CHP systems and technologies, and presents the results of the first such investigation carried out by four German research bodies.
Download or read book Cogeneration and Polygeneration Systems written by Majid Amidpour and published by Academic Press. This book was released on 2020-11-23 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cogeneration and Polygeneration Systems explores the suite of state-of-the-art modeling, design, analysis and optimization procedures for creating and retooling optimally efficient combined heat and power (CHP) and polygeneration energy systems. The book adopts exergetic and thermoeconomic analysis and related modeling and simulation tools to inform performance and systems design in modern cogeneration plants. Chapters provide a methodical approach to the design, operation and troubleshooting of cogeneration systems when they are integrated with industrial processes. Cogeneration targets, environmental impacts, total site integration, and availability and reliability issues are addressed in-depth. Explores exergetic and exergoeconomic analysis for optimization purposes of CHP systems Addresses availability and reliability issues within cogeneration systems Reviews modern polygeneration systems based on renewable energy resources and fuel cells
Download or read book Small and Micro Combined Heat and Power CHP Systems written by R Beith and published by Elsevier. This book was released on 2011-04-30 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small and micro combined heat and power (CHP) systems are a form of cogeneration technology suitable for domestic and community buildings, commercial establishments and industrial facilities, as well as local heat networks. One of the benefits of using cogeneration plant is a vastly improved energy efficiency: in some cases achieving up to 80–90% systems efficiency, whereas small-scale electricity production is typically at well below 40% efficiency, using the same amount of fuel. This higher efficiency affords users greater energy security and increased long-term sustainability of energy resources, while lower overall emissions levels also contribute to an improved environmental performance.Small and micro combined heat and power (CHP) systems provides a systematic and comprehensive review of the technological and practical developments of small and micro CHP systems.Part one opens with reviews of small and micro CHP systems and their techno-economic and performance assessment, as well as their integration into distributed energy systems and their increasing utilisation of biomass fuels. Part two focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines, gas turbines and microturbines, Stirling engines, organic Rankine cycle process and fuel cell systems. Heat-activated cooling (i.e. trigeneration) technologies and energy storage systems, of importance to the regional/seasonal viability of this technology round out this section. Finally, part three covers the range of applications of small and micro CHP systems, from residential buildings and district heating, to commercial buildings and industrial applications, as well as reviewing the market deployment of this important technology.With its distinguished editor and international team of expert contributors, Small and micro combined heat and power (CHP) systems is an essential reference work for anyone involved or interested in the design, development, installation and optimisation of small and micro CHP systems. - Reviews small- and micro-CHP systems and their techno-economic and performance assessment - Explores integration into distributed energy systems and their increasing utilisation of biomass fuels - Focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines
Download or read book Energy Audit of Building Systems written by Moncef Krarti and published by CRC Press. This book was released on 2016-04-19 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Buildings account for almost half of total primary energy use and related greenhouse emissions worldwide. Although current energy systems are improving, they still fall disappointingly short of meeting acceptable limits for efficiency. Well-trained energy auditors are essential to the success of building energy efficiency programs-and Energy Audit
Download or read book The Engineering Handbook written by Richard C. Dorf and published by CRC Press. This book was released on 2018-10-03 with total page 3080 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1995, The Engineering Handbook quickly became the definitive engineering reference. Although it remains a bestseller, the many advances realized in traditional engineering fields along with the emergence and rapid growth of fields such as biomedical engineering, computer engineering, and nanotechnology mean that the time has come to bring this standard-setting reference up to date. New in the Second Edition 19 completely new chapters addressing important topics in bioinstrumentation, control systems, nanotechnology, image and signal processing, electronics, environmental systems, structural systems 131 chapters fully revised and updated Expanded lists of engineering associations and societies The Engineering Handbook, Second Edition is designed to enlighten experts in areas outside their own specialties, to refresh the knowledge of mature practitioners, and to educate engineering novices. Whether you work in industry, government, or academia, this is simply the best, most useful engineering reference you can have in your personal, office, or institutional library.
Download or read book Energy Efficient Electrical Systems for Buildings written by Moncef Krarti and published by CRC Press. This book was released on 2017-03-03 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy-Efficient Electrical Systems for Buildings offers a systematic and practical analysis and design approaches for electrical distribution and utilization systems in buildings. In addition to meeting the minimal safety requirements set by the National Electrical Code (NEC), the design approach consider the life-cycle cost analysis of designing energy efficient electrical distribution systems as well as integrating renewable energy technologies into both residential and commercial buildings. The book first provides a general overview of basic power systems commonly available in buildings. Then, detailed discussions of various components of typical building electrical distribution system are outlined through several chapters including transformers, protection devices, conductors and conduits, power and lighting panels, and motor control centers. The book includes several illustrations and numerous examples and analysis exercises are included, along with detailed design examples.
Download or read book Handbook for Cogeneration and Combined Cycle Power Plants written by Meherwan P. Boyce and published by American Society of Mechanical Engineers. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the aspects of power plant design, operation, and maintenance. This title discusses cycle optimization and reliability, technical details on sizing, plant layout, fuel selection, types of drives, and performance characteristics of the major components in a cogeneration or combined cycle power plant.
Download or read book Power Plant Synthesis written by Dimitris Al. Katsaprakakis and published by CRC Press. This book was released on 2020-06-11 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Plant Synthesis provides an integrated approach to the operation, analysis, simulation, and dimensioning of power plants for electricity and thermal energy production. Fundamental concepts of energy and power, energy conversion, and power plant design are first presented, and integrated approaches for the operation and simulation of conventional electricity production systems are then examined. Hybrid power plants and cogeneration systems are covered, with operating algorithms, optimization, and dimensioning methods explained. The environmental impacts of energy sources are described and compared, with real-life case studies included to show the synthesis of the specific topics covered.
Download or read book Energy Abstracts for Policy Analysis written by and published by . This book was released on 1988 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Efficiency and Renewable Energy Handbook written by D. Yogi Goswami and published by CRC Press. This book was released on 2015-09-09 with total page 1779 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the Movers, Shakers, and Policy Makers in Energy Engineering and Related IndustriesThe latest version of a bestselling reference, Energy Efficiency and Renewable Energy Handbook, Second Edition covers the foremost trends and technologies in energy engineering today. This new edition contains the latest material on energy planning and policy, wi
Download or read book Exergy written by Ibrahim Dincer and published by Newnes. This book was released on 2012-12-31 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exergy, Second Edition deals with exergy and its applications to various energy systems and applications as a potential tool for design, analysis and optimization, and its role in minimizing and/or eliminating environmental impacts and providing sustainable development. In this regard, several key topics ranging from the basics of the thermodynamic concepts to advanced exergy analysis techniques in a wide range of applications are covered as outlined in the contents. - Offers comprehensive coverage of exergy and its applications, along with the most up-to-date information in the area with recent developments - Connects exergy with three essential areas in terms of energy, environment and sustainable development - Provides a number of illustrative examples, practical applications, and case studies - Written in an easy-to-follow style, starting from the basics to advanced systems
Download or read book Cogeneration written by Christos A. Frangopoulos and published by IET. This book was released on 2017-03-10 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive, integrated treatment of cogeneration technologies and systems. Also called combined heat and power (CHP), cogeneration is the use of a power station to deliver two or more useful forms of energy (e.g. generating electricity and heat at the same time). All conventional, fuel-based plants generate heat as by-product, which is often wasted. Cogeneration captures part of this heat for delivery to consumers. The book gives a tour of the available cogeneration technologies and their features. It provides plenty of instructive examples of cogeneration projects to illustrate key concepts, and also covers the relevant regulatory and legal frameworks. It is an ideal text/reference for anyone working in power systems and energy engineering. Topics covered include: * Benefits of cogeneration * Cogeneration technologies * Electrical engineering aspects * Applications of cogeneration * Fuels for cogeneration systems * Thermodynamic analysis * Environmental impacts of cogeneration * Reliability and availability * Economic analysis of cogeneration systems * Regulatory and legal frameworks * Selection, integration and operation of cogeneration systems * Simulation and optimisation * Synthesis, design and operation * Examples of cogeneration projects * Research and development of cogeneration * Summary and conclusions
Download or read book Selected Papers from IEEE ICKII 2019 written by Teen-Hang Meen and published by MDPI. This book was released on 2020-12-02 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, entitled “Selected papers from IEEE ICKII 2019”, selected 13 excellent papers from the 260 papers presented in the IEEE International Conference on Knowledge Innovation and Invention (IEEE ICKII) 2019 on energies. The 2nd IEEE ICKII 2019 was held in Seoul, South Korea, 12–15 July, 2019, and provided a unified communication platform for research on information technology, innovation design, communication science and engineering, industrial design, creative design, applied mathematics, computer science, electrical and electronic engineering, mechanical and automation engineering, green technology and architecture engineering, material science, and other related fields. The ICKII conference enables interdisciplinary collaboration of science and engineering technologists in the academic and industrial fields, as well as international networking. This book is a collection of 13 research papers. The fields included are as follows: energy fundamentals, energy sources and energy carriers, energy exploration, intermediate and final energy use, energy conversion systems, and energy research and development. The main goals of this book are to encourage scientists to publish their experimental and theoretical results in as much detail as possible, and to discover new scientific knowledge relevant to the topics of energies.
Download or read book Exergy written by Marc A Rosen and published by Elsevier. This book was released on 2007-09-18 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with exergy and its applications to various energy systems and applications as a potential tool for design, analysis and optimization, and its role in minimizing and/or eliminating environmental impacts and providing sustainable development. In this regard, several key topics ranging from the basics of the thermodynamic concepts to advanced exergy analysis techniques in a wide range of applications are covered as outlined in the contents.- Comprehensive coverage of exergy and its applications- Connects exergy with three essential areas in terms of energy, environment and sustainable development- Presents the most up-to-date information in the area with recent developments- Provides a number of illustrative examples, practical applications, and case studies - Easy to follow style, starting from the basics to the advanced systems
Download or read book Energy Research Abstracts written by and published by . This book was released on 1984 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Engineers Handbook Volume 4 written by Myer Kutz and published by John Wiley & Sons. This book was released on 2015-02-02 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The engineer's ready reference for mechanical power and heat Mechanical Engineer's Handbook provides the most comprehensive coverage of the entire discipline, with a focus on explanation and analysis. Packaged as a modular approach, these books are designed to be used either individually or as a set, providing engineers with a thorough, detailed, ready reference on topics that may fall outside their scope of expertise. Each book provides discussion and examples as opposed to straight data and calculations, giving readers the immediate background they need while pointing them toward more in-depth information as necessary. Volume 4: Energy and Power covers the essentials of fluids, thermodynamics, entropy, and heat, with chapters dedicated to individual applications such as air heating, cryogenic engineering, indoor environmental control, and more. Readers will find detailed guidance toward fuel sources and their technologies, as well as a general overview of the mechanics of combustion. No single engineer can be a specialist in all areas that they are called on to work in the diverse industries and job functions they occupy. This book gives them a resource for finding the information they need, with a focus on topics related to the productions, transmission, and use of mechanical power and heat. Understand the nature of energy and its proper measurement and analysis Learn how the mechanics of energy apply to furnaces, refrigeration, thermal systems, and more Examine the and pros and cons of petroleum, coal, biofuel, solar, wind, and geothermal power Review the mechanical parts that generate, transmit, and store different types of power, and the applicable guidelines Engineers must frequently refer to data tables, standards, and other list-type references, but this book is different; instead of just providing the answer, it explains why the answer is what it is. Engineers will appreciate this approach, and come to find Volume 4: Energy and Power an invaluable reference.
