Download or read book Coded Orthogonal Signaling written by Salih Semerciler and published by . This book was released on 1992 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Broadband Communications and Home Networking written by Scott R. Bullock and published by SciTech Publishing. This book was released on 2001-06-30 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the engineer and manager with a very good understanding of the processes needed to effectively perform the system design for broadband communication systems and home networking approaches. It is ideal for all engineers that design and analyze wireless, spread spectrum and basic broadband communication systems and are involved with the design of basic networking systems. It provides a good intuitive approach starting from basic telephony to satellite communications.

Download or read book Orthogonal Frequency Division Multiplexing for Wireless Communications written by Ye Geoffrey Li and published by Springer Science & Business Media. This book was released on 2006-05-31 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Orthogonal Frequency Division Multiplexing for Wireless Communications is an edited volume with contributions by leading authorities in the subject of OFDM. Its coverage consists of principles, important wireless topics (e.g. Synchronization, channel estimation, etc.) and techniques. Included is information for advancing wireless communication in a multipath environment with an emphasis on implementation of OFDM in base stations. Orthogonal Frequency Division Multiplexing for Wireless Communications provides a comprehensive introduction of the theory and practice of OFDM. To facilitate the readers, extensive subject indices and references are given at the end of the book. Even though each chapter is written by different experts, symbols and notations in all chapters of the book are consistent.

Download or read book Trellis Coded Modulation Applied to Orthogonal Signals written by Janet Emerson Stevens and published by . This book was released on 1993 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Digital Modulation and Coding written by Stephen G. Wilson and published by Pearson. This book was released on 1996 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers all important topics in digital transmission at the intuitive level of physical systems. The presentation attempts to bridge the gap between communication practice and theory, emphasizing the interplay between modulation and coding and their receiver counterparts. KEY TOPICS: Emphasizes the engineering tradeoffs in signal design, energy and spectral properties of modulation choices, and receiver design aspects including synchronization. Presents expanded material on lattices and block coding theory and applications. Reed-Solomon and BCH encoding and decoding algorithms are treated at length along with applications to bandlimited Gaussian channels and fading channels.

Download or read book OFDM written by Hermann Rohling and published by Springer Science & Business Media. This book was released on 2011-03-22 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: (Preliminary): The Orthogonal Frequency Division Multiplexing (OFDM) digital transmission technique has several advantages in broadcast and mobile communications applications. The main objective of this book is to give a good insight into these efforts, and provide the reader with a comprehensive overview of the scientific progress which was achieved in the last decade. Besides topics of the physical layer, such as coding, modulation and non-linearities, a special emphasis is put on system aspects and concepts, in particular regarding cellular networks and using multiple antenna techniques. The work extensively addresses challenges of link adaptation, adaptive resource allocation and interference mitigation in such systems. Moreover, the domain of cross-layer design, i.e. the combination of physical layer aspects and issues of higher layers, are considered in detail. These results will facilitate and stimulate further innovation and development in the design of modern communication systems, based on the powerful OFDM transmission technique.

Download or read book The Orthogonal Frequency Division Multiplexing OFDM Introduction and explanation of five different types of techniques written by Dr. Lokesh Chikkananjaiah and published by GRIN Verlag. This book was released on 2021-02-25 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thesis (M.A.) from the year 2019 in the subject Electrotechnology, grade: 9, , language: English, abstract: The Orthogonal Frequency Division Multiplexing (OFDM) is an important aspect of multicarrier digital data transmission system where a single data stream is transmitted into a several number of lower rates subcarrier signals. In this thesis, there are five different types of the techniques introduced to strengthen the communication quality and capacity. This kind of new standard of transmission of data is the first one to perform with OFDM in data packet based communication system. In wireless communication network, the abstraction of parallel transmission of data symbols is implemented to attain high throughput and effective transmission quality. The OFDM is a method to deal with parallel transmission.

Download or read book LDPC Coded M ary Orthogonal Signaling with Noncoherent Detection written by Supawat Supakwong and published by . This book was released on 2005 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Quasi orthogonal Space time Block Code written by Chau Yuen and published by Imperial College Press. This book was released on 2007 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quasi-Orthogonal Space-Time Block Code presents an up-to-date, comprehensive and in-depth discussion of an important emerging class of space-time codes, called the Quasi-Orthogonal STBC (QO-STBC). Used in Multiple-Input Multiple-Output (MIMO) communication systems, they provide transmit diversity with higher code rates than the well-known orthogonal STBC (O-STBC), yet at lower decoding complexity than non-orthogonal STBC. This book will help readers gain a broad understanding of the fundamental principles as well as the state-of-the-art work in QO-STBC, thus enabling them to appreciate the roles of QO-STBC in future broadband wireless systems and to inspire further research. Sample Chapter(s). Foreword (151 KB). Chapter 1: Introduction of MIMO Channel and Space-Time Block Code (703 KB). Contents: Introduction of MIMO Channel and Space-Time Block Code; Orthogonal and Quasi- Orthogonal Space-Time Block Code; Insights of QO-STBC; Quasi-Orthogonal Space-Time Block Code with Minimum Decoding Complexity; Differential QO-STBC; Rate, Complexity and Diversity Trade-Off in QO-STBC; Other Developments and Applications of QO-STBC. Readership: Academics and graduate-level research students and developers of next-generation wireless systems.

Download or read book Digital Communications with Emphasis on Data Modems written by Richard W. Middlestead and published by John Wiley & Sons. This book was released on 2017-03-07 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book uses a practical approach in the application of theoretical concepts to digital communications in the design of software defined radio modems. This book discusses the design, implementation and performance verification of waveforms and algorithms appropriate for digital data modulation and demodulation in modern communication systems. Using a building-block approach, the author provides an introductory to the advanced understanding of acquisition and data detection using source and executable simulation code to validate the communication system performance with respect to theory and design specifications. The author focuses on theoretical analysis, algorithm design, firmware and software designs and subsystem and system testing. This book treats system designs with a variety of channel characteristics from very low to optical frequencies. This book offers system analysis and subsystem implementation options for acquisition and data detection appropriate to the channel conditions and system specifications, and provides test methods for demonstrating system performance. This book also: Outlines fundamental system requirements and related analysis that must be established prior to a detailed subsystem design Includes many examples that highlight various analytical solutions and case studies that characterize various system performance measures Discusses various aspects of atmospheric propagation using the spherical 4/3 effective earth radius model Examines Ionospheric propagation and uses the Rayleigh fading channel to evaluate link performance using several robust waveform modulations Contains end-of-chapter problems, allowing the reader to further engage with the text Digital Communications with Emphasis on Data Modems is a great resource for communication-system and digital signal processing engineers and students looking for in-depth theory as well as practical implementations.

Download or read book Error Correction Coding for Digital Communications written by George C. Clark Jr. and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Error-correction coding is being used on an almost routine basis in most new communication systems. Not only is coding equipment being used to increase the energy efficiency of communication links, but coding ideas are also providing innovative solutions to many related communication problems. Among these are the elimination of intersymbol interference caused by filtering and multipath and the improved demodulation of certain frequency modulated signals by taking advantage of the "natural" coding provided by a continuous phase. Although several books and nu merous articles have been written on coding theory, there are still noticeable deficiencies. First, the practical aspects of translating a specific decoding algorithm into actual hardware have been largely ignored. The information that is available is sketchy and is widely dispersed. Second, the information required to evaluate a particular technique under situations that are en countered in practice is available for the most part only in private company reports. This book is aimed at correcting both of these problems. It is written for the design engineer who must build the coding and decoding equipment and for the communication system engineer who must incorporate this equipment into a system. It is also suitable as a senior-level or first-year graduate text for an introductory one-semester course in coding theory. The book U"Ses a minimum of mathematics and entirely avoids the classical theorem/proof approach that is often seen in coding texts.

Download or read book Coded Modulation Systems written by John B. Anderson and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coded Modulation Systems is an introduction to the subject of coded modulation in digital communication. It is designed for classroom use and for anyone wanting to learn the ideas behind this modern kind of coding. Coded modulation is signal encoding that takes into account the nature of the channel over which it is used. Traditional error correcting codes work with bits and add redundant bits in order to correct transmission errors. In coded modulation, continuous time signals and their phases and amplitudes play the major role. The coding can be seen as a patterning of these quantities. The object is still to correct errors, but more fundamentally, it is to conserve signal energy and bandwidth at a given error performance. The book divides coded modulation into three major parts. Trellis coded modulation (TCM) schemes encode the points of QAM constellations; lattice coding and set-partition techniques play major roles here. Continuous-phase modulation (CPM) codes encode the signal phase, and create constant envelope RF signals. The partial-response signaling (PRS) field includes intersymbol interference problems, signals generated by real convolution, and signals created by lowpass filtering. In addition to these topics, the book covers coding techniques of several kinds for fading channels, spread spectrum and repeat-request systems. The history of the subject is fully traced back to the formative work of Shannon in 1949. Full explanation of the basics and complete homework problems make the book ideal for self-study or classroom use.

Download or read book Signal Coding and Processing written by Graham Wade and published by Cambridge University Press. This book was released on 1994-09-08 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive text is a revised and greatly expanded second edition of a book first published in 1987, and provides a thorough introduction to the complex fields of signal coding and signal processing. Among the key topics covered are: the fundamentals of pulse code modulation; modern data compression techniques; block and convolutional error control codes; transmission coding techniques; digital filters; infinite and finite impulse response filters; adaptive filters; and fast Fourier transform theory, implementation and applications. Complete with problems and solutions, and containing over 230 diagrams, this textbook will be invaluable to third and fourth year undergraduates in electronic, electrical or communication engineering. It will also act as a useful reference for anyone working in this technologically important field.

Download or read book Signaling in Telecommunication Networks written by John G. van Bosse and published by John Wiley & Sons. This book was released on 2006-11-03 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidance to help you grasp even the most complex network structures and signaling protocols The Second Edition of Signaling in Telecommunication Networks has been thoroughly updated, offering new chapters and sections that cover the most recent developments in signaling systems and procedures. This acclaimed book covers subscriber and network signaling in both fixed and mobile networks. Coverage begins with an introduction to circuit-switched telephone networks, including an examination of trunks, exchanges, access systems, transmission systems, and other basic components. Next, the authors introduce signaling concepts, beginning with older Channel Associated Signaling (CAS) systems and progressing to today's Common Channel Signaling (CCS) systems. The book then examines packet networks and their use in transmitting voice (VoIP), TCP/IP protocols, VoIP signaling protocols, and ATM protocols. Throughout the book, the authors emphasize functionality, particularly the roles of individual protocols and how they fit in network architectures, helping readers grasp even the most complex network structures and signaling protocols. Highlights of the Second Edition include: Coverage of the latest developments and topics, including new chapters on access networks, intelligent network application part, signaling for voice communication in packet networks, and ATM signaling Drawings and tables that help readers understand and visualize complex systems Comprehensive, updated references for further study Examples to help readers make the bridge from theory to application With the continued growth and expansion of the telecommunications industry, the Second Edition is essential reading for telecommunications students as well as anyone involved in this dynamic industry needing a solid understanding of the different signaling systems and how they work. Moreover, the book helps readers wade through the voluminous and complex technical standards by providing the essential structure, terminology, and functionality needed to understand them.

Download or read book OFDM for Optical Communications written by William Shieh and published by Academic Press. This book was released on 2009-09-18 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book on optical OFDM by the leading pioneers in the field The only book to cover error correction codes for optical OFDM Gives applications of OFDM to free-space communications, optical access networks, and metro and log haul transports show optical OFDM can be implemented Contains introductions to signal processing for optical engineers and optical communication fundamentals for wireless engineers This book gives a coherent and comprehensive introduction to the fundamentals of OFDM signal processing, with a distinctive focus on its broad range of applications. It evaluates the architecture, design and performance of a number of OFDM variations, discusses coded OFDM, and gives a detailed study of error correction codes for access networks, 100 Gb/s Ethernet and future optical networks. The emerging applications of optical OFDM, including single-mode fiber transmission, multimode fiber transmission, free space optical systems, and optical access networks are examined, with particular attention paid to passive optical networks, radio-over-fiber, WiMAX and UWB communications. Written by two of the leading contributors to the field, this book will be a unique reference for optical communications engineers and scientists. Students, technical managers and telecom executives seeking to understand this new technology for future-generation optical networks will find the book invaluable. William Shieh is an associate professor and reader in the electrical and electronic engineering department, The University of Melbourne, Australia. He received his M.S. degree in electrical engineering and Ph.D. degree in physics both from University of Southern California. Ivan Djordjevic is an Assistant Professor of Electrical and Computer Engineering at the University of Arizona, Tucson, where he directs the Optical Communications Systems Laboratory (OCSL). His current research interests include optical networks, error control coding, constrained coding, coded modulation, turbo equalization, OFDM applications, and quantum error correction. "This wonderful book is the first one to address the rapidly emerging optical OFDM field. Written by two leading researchers in the field, the book is structured to comprehensively cover any optical OFDM aspect one could possibly think of, from the most fundamental to the most specialized. The book adopts a coherent line of presentation, while striking a thoughtful balance between the various topics, gradually developing the optical-physics and communication-theoretic concepts required for deep comprehension of the topic, eventually treating the multiple optical OFDM methods, variations and applications. In my view this book will remain relevant for many years to come, and will be increasingly accessed by graduate students, accomplished researchers as well as telecommunication engineers and managers keen to attain a perspective on the emerging role of OFDM in the evolution of photonic networks." -- Prof. Moshe Nazarathy, EE Dept., Technion, Israel Institute of Technology The first book on optical OFDM by the leading pioneers in the field The only book to cover error correction codes for optical OFDM Applications of OFDM to free-space communications, optical access networks, and metro and log haul transports show optical OFDM can be implemented An introduction to signal processing for optical communications An introduction to optical communication fundamentals for the wireless engineer

Download or read book Radar Signals written by Nadav Levanon and published by John Wiley & Sons. This book was released on 2004-09-21 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: A text and general reference on the design and analysis of radar signals As radar technology evolves to encompass a growing spectrum of applications in military, aerospace, automotive, and other sectors, innovations in digital signal processing have risen to meet the demand. Presenting a long overdue, up-to-date, dedicated resource on radar signals, the authors fill a critical gap in radar technology literature. Radar Signals features in-depth coverage of the most prevalent classical and modern radar signals used today, as well as new signal concepts developed in recent years. Inclusion of key MATLAB software codes throughout the book demonstrates how they dramatically simplify the process of describing and analyzing complex signals. Topics covered include: * Matched filter and ambiguity function concepts * Basic radar signals, with both analytical and numerical analysis * Frequency modulated and phase-coded pulses * Complete discussion of band-limiting schemes * Coherent LFM pulse trains-the most popular radar signal * Diversity in pulse trains, including stepped frequency pulses * Continuous-wave signals * Multicarrier phase-coded signals Combining lucid explanation, preferred signal tables, MATLAB codes, and problem sets in each chapter, Radar Signals is an essential reference for professionals-and a systematic tutorial for any seeking to broaden their knowledge base in this dynamic field.

Download or read book Pseudo Random Signal Processing written by Hans-Jurgen Zepernick and published by John Wiley & Sons. This book was released on 2013-07-17 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, pseudo random signal processing has proven to be a critical enabler of modern communication, information, security and measurement systems. The signal’s pseudo random, noise-like properties make it vitally important as a tool for protecting against interference, alleviating multipath propagation and allowing the potential of sharing bandwidth with other users. Taking a practical approach to the topic, this text provides a comprehensive and systematic guide to understanding and using pseudo random signals. Covering theoretical principles, design methodologies and applications, Pseudo Random Signal Processing: Theory and Application: sets out the mathematical foundations needed to implement powerful pseudo random signal processing techniques; presents information about binary and nonbinary pseudo random sequence generation and design objectives; examines the creation of system architectures, including those with microprocessors, digital signal processors, memory circuits and software suits; gives a detailed discussion of sophisticated applications such as spread spectrum communications, ranging and satellite navigation systems, scrambling, system verification, and sensor and optical fibre systems. Pseudo Random Signal Processing: Theory and Applicationis an essential introduction to the subject for practising Electronics Engineers and researchers in the fields of mobile communications, satellite navigation, signal analysis, circuit testing, cryptology, watermarking, and measurement. It is also a useful reference for graduate students taking courses in Electronics, Communications and Computer Engineering.